First of all excuse me for my bad english, I've installed the touch hd keyboard, how do I set this as the default, so I don't have to change it each time I use it.
tariks said:
First of all excuse me for my bad english, I've installed the touch hd keyboard, how do I set this as the default, so I don't have to change it each time I use it.
Click to expand...
Click to collapse
SIP Change
you can do this with sktools, if you have it. If not and don't need a maintenance tool then you are better of with sip change.
Related
I have couple of troubles with my 9100.
1. Virtual keyboard has Cyrillic layout. To write in English I have to tap au virtual key for each letter. I didnt find how to switch to English layout. It's very hard to write this message using virtual keyboard, believe me.
2. I cannot use Terminal Services client because I cannot enter English letters to specify login name and password. I tried to switch layout on sliding keyboard by it enters always Cyrillic. I tried virtual keyboard too but the same result.
I supposed any third party keyboard layout utility will help but I didnt find anything that works fine on 9100. I tried qkeys and Resco keyboard.
Does anyone know something about?
Resco works fine on mine.
Gevor said:
Resco works fine on mine.
Click to expand...
Click to collapse
Which version?
Had the very same problem.
1. Tap au key twice (fast) and it would switch to english
2. Use any registry editor to change "Keyboard layout" string value in HKCU\Software\Microsoft\Terminal Server Client\ from "00000419" to "00000409". Wait a couple of mins and soft-reset the device. After that ts client will be using english by default.
slavar said:
Had the very same problem.
1. Tap au key twice (fast) and it would switch to english
2. Use any registry editor to change "Keyboard layout" string value in HKCU\Software\Microsoft\Terminal Server Client\ from "00000419" to "00000409". Wait a couple of mins and soft-reset the device. After that ts client will be using english by default.
Click to expand...
Click to collapse
Wow! It really works! Thank you very much!
By the way how to tap @ on virtual keyboard? I cannot find it, have to use sliding keyboard...
vishny said:
By the way how to tap @ on virtual keyboard? I cannot find it, have to use sliding keyboard...
Click to expand...
Click to collapse
This is where Resco Keyboard would come in handy
Excuse me, I've found it. It appears near spacebar when shift is pressed.
Russian Rom Wanted!
Guys, can you share the firmware (rom image) ? Please!
Russian edition?
Yes, please!
Want to change language to Russian.
Is there an application we can use in order to Write SMS Messages or mail using the Phone Keypad like the regular cellphones?
Remebre the old tedious (Key 2 push push C, Key 4 push puss pus I, Key 1 push A, Key 6 push push push O)
I love my TYTN for the great little fast keyboard but find it a little annoying having to use both hands when I have to send just a quick reply message while I am walking (NOT DRIVING)
Any suggestions?
CIAO
http://forum.xda-developers.com/showthread.php?t=286749
Thanks but does not work with my TYTN XO1 HT Ex Japanese now English system could that be the reason?
sankyutech said:
http://forum.xda-developers.com/showthread.php?t=286749
Click to expand...
Click to collapse
Thanks sankyutech
After uninstalling some 3rd party phone dialer and using the default one the now the intellipad is working just fine.
Ryuerik said:
Thanks sankyutech
After uninstalling some 3rd party phone dialer and using the default one the now the intellipad is working just fine.
Click to expand...
Click to collapse
Pleased it's working...enjoy ur intellipad
Thanks works perfectly for me. One problem though. Once I have selected Intelli Pad and I soft reset my device the normal keyboard gets selected again and I have to manually re-select Intelli Pad again. Is there a way that Intelli Pad remains selected elem after a soft reset.
Thanks and Regards
i have no idea..i also have to turn it manually after have a soft reset
sankyutech said:
i have no idea..i also have to turn it manually after have a soft reset
Click to expand...
Click to collapse
Same here
Softreset = Manual selection
T9 Dictionary improving?
Do you know how to improve T9 Italian dictionary? I have problems to recognize even simple italian words...
golemgolem said:
Do you know how to improve T9 Italian dictionary? I have problems to recognize even simple italian words...
Click to expand...
Click to collapse
Are you sure you have the italian language selected in the phone pad option?
I have no problem with spelling.
Phone pad can recognize also.. well not all precipitevolissimevolmente
but precipitevolissi... OK!
Hey guys,
Is it possible to delete the Windows on screen keyboard or to get another input option as standard, because it is absolutely useless and too small.
Thanks a lot!
people have experienced some serious issues with disabling it
if u don't use an on screen keyboard then try nullkb
use sktools
HansWurst40 said:
Hey guys,
Is it possible to delete the Windows on screen keyboard or to get another input option as standard, because it is absolutely useless and too small.
Thanks a lot!
Click to expand...
Click to collapse
don't bother deleting the default keyboard, just try other keyboards such as spb keyboard or resco keyboard and make it as your default one.
ericmateo said:
don't bother deleting the default keyboard, just try other keyboards such as spb keyboard or resco keyboard and make it as your default one.
Click to expand...
Click to collapse
How do u make it as your default one?
The easiest way is to use SKtools.
Advanced Config has a setting under "Input > Auto deploy SIP:" to disable the soft keyboard in most situations, I find that works for pretty much everything except Opera. If I remember correctly Opera has it's own registry entry for stopping the SIP popup.
I don't like having the SIP at all either, it seems pointless considering we have a hardware keyboard, and I always prefer disabling and/or complete removal than adding more software to acheive the required result.
The on screen keyboard is indeed useless. Is there a way, without installing apps, to disable it?
dogans said:
The on screen keyboard is indeed useless. Is there a way, without installing apps, to disable it?
Click to expand...
Click to collapse
use sktools.under the input just remove registry key.thats all.but i would recommend you to be carefull.if you mess up input keyboard your phone will not be start again.if that happens you have to hard reset.cheers
SquidgyB said:
Advanced Config has a setting under "Input > Auto deploy SIP:" to disable the soft keyboard in most situations, I find that works for pretty much everything except Opera. If I remember correctly Opera has it's own registry entry for stopping the SIP popup.
I don't like having the SIP at all either, it seems pointless considering we have a hardware keyboard, and I always prefer disabling and/or complete removal than adding more software to acheive the required result.
Click to expand...
Click to collapse
Where exactly is the input? I don't see it.
Cheeze[iT] said:
Where exactly is the input? I don't see it.
Click to expand...
Click to collapse
SIP = software input panel = stupid archaic useless microsoft tiny keyboard popping up everywhere
WinMo was designer TEN YEARS AGO for 320x240, 32MB RAM devices, and has not changed to date... SHAME Microsoft...
I've dealt a lot with opera:config and I've not found where to disable it yet
can someone point to where the SIP is on Advance Config? Can't seem to find it. Thanks.
How do I set the htc keyboard to be default?
Start Menu -> Settings -> Input -> set your Inut Method as "Full QWERTY" if that's the HTC one. I'm suprised nobody answered you, it's quite simple.
My Bad, it doesn't work after restart.
Hi there is my problme,with my Wizard qwerty keybard is all fine,but if i want to make this sign !,i push the buton,he wrotes me other sign which is on the next button,like my keyboard is gone to left on one step,where could be the problem?
Viktorijus said:
Hi there is my problme,with my Wizard qwerty keybard is all fine,but if i want to make this sign !,i push the buton,he wrotes me other sign which is on the next button,like my keyboard is gone to left on one step,where could be the problem?
Click to expand...
Click to collapse
If someone dont understand,i am trying explain in other way,the symbols on the keyboard arent in their places.they are in diferent buttons than shown on keyboard
have you changed rom?...probably your keyboard layout now is the english, search the program "advanced config" and install it, then with this you can change the keyboard layout...
yes my ROM is english,what layout shoud be that would be everything fine?
you have to set your keyboard layout..for example i'm italian and i use italian layout...
mittolo said:
you have to set your keyboard layout..for example i'm italian and i use italian layout...
Click to expand...
Click to collapse
can you explain more about layout,where to change it?and where to get it?
I rooted my kindle fire and the only thing that is missing is a keyboard in my language. I did the trick to change the input language on the stock keyboard but it doesn't have the Greek language. I installed a different keyboard but I cannot find.how to.change the keyboard. Is there a way to change the keyboard or install my language to the.stock keyboard? Thank you.
you can change the input language on the stock keyboard allthrough the options are not displayed in settings:
there is a app called "any cut" on the market
in any cut you can select new shortcut - activity - and select input languages or so - can't tell exactly cause mine is german
then you have a shortcut on kf and you can select your language
btw. with playing around with the activities you'll find some other settings too (accounts and settings, ...)
maybe you want to take a look here too:
http://forum.xda-developers.com/showthread.php?t=1382360
b63 said:
you can change the input language on the stock keyboard allthrough the options are not displayed in settings:
there is a app called "any cut" on the market
in any cut you can select new shortcut - activity - and select input languages or so - can't tell exactly cause mine is german
then you have a shortcut on kf and you can select your language
btw. with playing around with the activities you'll find some other settings too (accounts and settings, ...)
maybe you want to take a look here too:
http://forum.xda-developers.com/showthread.php?t=1382360
Click to expand...
Click to collapse
When I wrote I did the trick, I meant I did what you just said but my language is not included. Is there a way I can add my language to that list?
ignited said:
When I wrote I did the trick, I meant I did what you just said but my language is not included. Is there a way I can add my language to that list?
Click to expand...
Click to collapse
only the languages in the list are available - i can't read them all - sorry if your's is not in the list ...
I live in France and using Switfkey Tablet X and Nook Color under 6.2.2, my keyboard is AZERTY. You have to install it : you will find greek, arabic, hebrew and may other keyboards.
Good luck
Nestor94 said:
I live in France and using Switfkey Tablet X and Nook Color under 6.2.2, my keyboard is AZERTY. You have to install it : you will find greek, arabic, hebrew and may other keyboards.
Good luck
Click to expand...
Click to collapse
I installed other keyboards with the Greek language but i cannot find how to enable the "new" keyboard from the keyboard settings(there aren't any?!?!).
I found this tutorial. Thanks for your help. http://forum.xda-developers.com/showthread.php?t=1351914
ignited said:
I installed other keyboards with the Greek language but i cannot find how to enable the "new" keyboard from the keyboard settings(there aren't any?!?!).
Click to expand...
Click to collapse
Install a kbd with your language (Swift and anysoft both have Greek). Then long press in any text entry box. A popup will show. Select 'Input method' and then choose your new kbd. It will then default to the new kbd.