I am technically very challenged, but have searched your site and can't find the answer so if I've missed something then I apologise ....!
I have a treo 750 on vodafone, who are not helping as they upgraded me to another model but I went back to using the palm instead of the new upgrade phone.
Suddenly the sounds gone during calls. I can use it on loudspeaker, but not without. Apparently I can be heard, but I can't hear anything except the odd crackle in and out of conversation.
If you can help please I'd be so grateful. I can't believe flippin Vodafone know NOTHING about these phones. All they would say is why am I still using it!
This is the Palm Pro section, not the 750
Did you try a hard reset? If the internal speaker is not working after a hard reset than your speaker might be broken!
thats funny...
my sounds for incoming calls are not working too on my pro.
Have no idea but I do have a wild guess.. ..older HTC devices had a problem that the headset switch inside the device would get stuck. As a result the internal speaker stopt working. Solution was to blow in the headphone hole..
Related
on a I-mate jam it's possible to turn on speaker while calling so you can speak "handsfree".
This can be done by holding down the green call button.
When I do this the sounds of the speaker is de same as normal only the sounds comes from the back of the phone instead of the front.
Does anybody know how to fix this? A friend of mine has the same phone without a problem.
KoBolD said:
on a I-mate jam it's possible to turn on speaker while calling so you can speak "handsfree".
This can be done by holding down the green call button.
When I do this the sounds of the speaker is de same as normal only the sounds comes from the back of the phone instead of the front.
Does anybody know how to fix this? A friend of mine has the same phone without a problem.
Click to expand...
Click to collapse
Have you tried while you are on the speakerphone mode to make the volume slider higher?
That ain't gonna help you. This is a known - and unsolved problem with the Jam. If you really need a speakerphone, you should return the phone. No amount of firmware/ROM update will help you.
I use the speakerphone option without any problems. The sound is loud and clear. What is this unresolved JAM problem that you're talking about?
Jam speakerphone volume problem
My XDA1 had the best speakerphone I've ever used, including corded phones. I could be in a conferance room with 10 people around the table and everyone could hear, speak and the participate on the phone never had problems with background noise. I have a hard time accepting that next generation technology from the same manufacturer should be woefully inadequate. The unit is advertised as a speakerphone, the solution is to return my phone and purchase another? No thanks friend, anyone reading this with solutions please respond.
I only have the phone for 1 month now so I´ll return it
tnx for the help
I think most of us don't know how to hold the mini in the right way, while the phone is in speaker mode...
if u want to hear a load voice.. make sure that back of the phone faces ur ear..
that' because the mini has 2 speakers... and the one in the back( near the mirror) is loader.. so you will hear the conversation very well...
and BTY.. I suggest u upgrade to the latest ROM available for ur device..
it helped me a lot....
cheers
duke911 said:
I think most of us don't know how to hold the mini in the right way, while the phone is in speaker mode...
if u want to hear a load voice.. make sure that back of the phone faces ur ear..
that' because the mini has 2 speakers... and the one in the back( near the mirror) is loader.. so you will hear the conversation very well...
Click to expand...
Click to collapse
Wrong - its patently obvious that the sound is coming from from the back speaker. Why on earth it comes frm the back is another question entirely, given that the speaker phone is supposed to free up your hands so you do other things, including multi-task on the device i.e looking at the screen! Every other phone I've had has a decent speakerphone - and they face the front too.
But the main problem is that the volume from the supposed "speakerphone" is too damn low, irregardless of location.
Considering all the huge volumes of prior experience that HTC has (making practically every Microsoft PPC device, smartphones, plus the Palm Treo phone), things like this awful speakerphone on the magician are really not excusable at all.
I went through 3 TREO 600s due to speaker problems. You could barely hear the speaker phone on the 600 either. ANd to top that off, no one could hear you! The JAM is nice, but the more that I use it, the more I wish that either I bought something else or that the the JAM could just work the way it was designed!!!!!!
1.3 Mega pixel camera... my ass! It's the same quality as my first Casio digital camera from '96. Not mention the fact that Imate can't even put a decent ROM update together.
Perhaps we should build our own PPC's!
P.S. PM me if you want the CEO and VP of Imate's e-mail address. I e-mailed them and they actually wrote back! -Of course they weren't very helpful though. :evil:
One time, I turned on this speakermode operation on my MDA-Compact, I could hear my phonecall loud and clear from the built-in speaker.... This happenend accidently, probably by pressing just the right button, but I wasn't aware....
I cannot find how to do this again? How can I get the MDA-Compact to operate in speakermode using the built-in speaker?
I'm searching this (and other forums) quite a while now, but I cannot find my solution?!
Any help will be very much appreciated!
Thanks,
Igor.
One time, I turned on this speakermode operation on my MDA-Compact, I could hear my phonecall loud and clear from the built-in speaker.... This happenend accidently, probably by pressing just the right button, but I wasn't aware....
I cannot find how to do this again? How can I get the MDA-Compact to operate in speakermode using the built-in speaker?
I'm searching this (and other forums) quite a while now, but I cannot find my solution?!
Any help will be very much appreciated!
Thanks,
Igor.
Speakerphone..
To turn on the speakerphone part press the Green call button whilst in the call for 5 secs or so.....
I updated my Jam and now it's all ok
Hi all,
Does anyone else have problems with people not being able to hear them when they use speaker phone on their MDA Pro? I can hear them as clear as you like, they just can't hear me.
It seems like it's something to do with noise cancellation software in the pro. Does anyone know a way to get around this?
Thanks
Sank
Anyone ? I really need to find a solution to this.
TIA
Sank
Have you tried in an otherwise silent environment? I find the speakerphone on mine near useless unless I shout down the thing almost directly into the microphone and the other caller shouts back.
I'm getting reports that people cannot hear me on speakerphone now. It was OK a couple of weeks ago (well, never got any complaints ).
I've installed PocketZenPhone recently, so maybe a messed the settings up . Haven't had time to dig into it.
Is there anything you've installed recently that may have changed things (almost impossible to know with Win based systems !)
Regards,
Lance
Glad I'm not the only 1, but does anyone have a solution?
Xiasma - I find mine worst when the person I'm phoning is in a loud environment. I also find people can hear me better if I turn the volume down.
Lance - I haven't installed anything new for a long time, so I don't think it's something I've installed.
Thanks
Dave
Hey all, im glad this site is up its been great finding what i can really do with my wizard!
here is he issue im having. the wizard has 3 different speakers and 1 microphone. 2 side speakers (used to play music, or speaker phone) and the 1 main speaker (used for hearing calls). none of the 3 work when im making calls, listening to music, alarms, or any of the "screen click" sounds and the microphone doesnt work on phone calls or note recordings. however, the one time the speakers do work is when i have an incoming call, i tried listening to see which speaker its coming out of and it sounds like all 3. the headphone jack still works so thats what ive been using. pressing the speaker phone button while on a call (that i cant hear) doesnt do anything, the UI doesnt show any change or switch to indicate its changed to speaker phone and the "speaker on" button doesnt change to "speaker off" like it used to.
originally i thought this was a ROM issue, i was using the manufacturer's ROM (cingular 8125, unlocked for tmobile service) so i followed the lovely tutorial and switched my phone over to the t-mobile 2.26 ROM. this had no effect, so I then upgraded to XDA's WM6 ROM and while i love this new ROM it still did not fix my sound issue.
im stumped, any help anyone can offer would be great. I wanted to post here before i crack it open to look at all the insides.
same problem!
I'm having the exact same problem! I just noticed the problem recently, when my phones alarm didn't sound. I'm running a custom cooked rom from mattk_r 318 kitchen, but I don't think the rom is the problem, as i am indeed still hearing sound from the head phone jack. I don't think the internal speakers are broken, as when a call comes, the phone rings, and the sound come out from the speaks as mentioned above!
Help!
dropped?
have you ever dropped your phone?
I have dropped mine a couple times and thats the only cause I can come up with. But this never seemed to be a problem until recently.
no major drop recently.
i havent really dropped it recently at all.and for some reason i dont think the hardware is the problem,because i tryed voice recorder,and it records my voice and i can play it
back through the headset.so that confirms that the mic and both spealers work (rings
when incoming call). i really dont want this to be the downfall for my wizard! is there
any key registry entrys for sound maybe that we could have a look at? btw my wizards a G4 if thats makes any difference.
please help!!
mine is a g3, if it were a software issue then reflashing should have solved it. right? i dont know enough about the internal workings of the wizard to know what a flash actually does.
?
Anyone have any ideas on what I can try?
Well, a flash is an OS upgrade/downgrade. It contains drivers, programs, registry settings, things of that sort. Sounds like your problem is hardware related, nothing to do with the OS itself.
I assume the warranty on that baby has already expired, so you're pretty much on your own.
Two options come to mind:
1. The obvious... buy another Wizard
2. The not so obvious... buy another Wizard with a broken screen and take all of its guts out and put them in yours.
A third option also exists... (ther's always a third way)
Mind you, this is for INFORMATION PURPOSES ONLY! In no way do I condone the below mentioned method.
Get a new line of service with Cingular and buy the Wizard to use with it. Exchange their boards, swap the IMEIs using the Wizard Service Tool utility found on these boards, cancel the line of service and return the "new" Wizard.
Sound issues
I have had a similar problem but located my problem to the microswitch which is in the headphone socket. Might be worth trying pulling the headphones in and out a few times to see if it allows the microswitch to release (if that is the problem?)
Steve
The wizard is magic
Some how my wizard seemed to repair it self. Its sound is working again...i didn't reflash or do anything special....weird. I think its because the phone had a good vibrate....ive got one of those speaker docks for the wizard..i put it in there...got a phone call and talked and stuff...but while it was in there (with the mic plugged it) it vibrated alot...maybe that flicked the switch mentioned above?
weird..this phone never ceases to amaze me. I just hope it doesn't happen again... because it appears to be emerging as a problem as the wizards get older?
Keep up the good work guys!
LOL!!!!!!!!! its so simple and yet so amazingly smart
wow, Steve you are the most amazing person EVER!
I put the headphone piece in about 1/10 of the way and slowly made a swirling action as i slid it all the way in, clicked the start button on wizard and i heard the "click" for the first time in a month!
Thanks!
I tried different options to get my sound back, no luck so far
Problem started after using the headset-connector to connect it to an FM-Transmitter.
After reading this thread, my guess is that the "micro-switch" is in a wrong position. So I opend my MDA, but can't find any "switch" in that connector.
Is there some more info about that connector, a connection-diagram perhaps ?
what worked for me was inserting the headset jack in roughly, robbing each side of the headset jack to try to hit the "switch". that might work for you.
Yes!!! Thank you a lot!
I have the same problem, no sound in my speakers, just vibrate and sound in handsfree. I figure out that this micro-switch could be the problem, but I haven't know how to solve it. Thank you once again, I love my SPV!! and this community.
Fixed!
Woohoo!
This problem just cropped up for me on the weekend.
Thankfully it wasn't long before I happened across this thread.
About a minute of persistent jiggling the microphone jack did the trick.
Thanks!
Hi everyone, I hope one of you can help me out.
I bought a vogue on eBay to play with the android OS. I loved android, but I had an issue... When I called someone they couldn't hear me but I could hear them. Also none of the sound notifications were working... no incoming calls, no music files... it looked like the software was working, but I couldn't hear anything.
The sound was working fine before I converted to android (directly from the phone not the SD card), so I flashed to a WM rom... still the same issue. I can hear everything perfectly fine when I call my voice mail, but people can't hear me when I call them, and none of my sound files make any noise even though it looks like media player is playing them properly.
I flashed to the Sprint stock rom for the Vogue, and still the same issue...
Can someone please help me? I have no idea what to do.
^_^ said:
Hi everyone, I hope one of you can help me out.
I bought a vogue on eBay to play with the android OS. I loved android, but I had an issue... When I called someone they couldn't hear me but I could hear them. Also none of the sound notifications were working... no incoming calls, no music files... it looked like the software was working, but I couldn't hear anything.
The sound was working fine before I converted to android (directly from the phone not the SD card), so I flashed to a WM rom... still the same issue. I can hear everything perfectly fine when I call my voice mail, but people can't hear me when I call them, and none of my sound files make any noise even though it looks like media player is playing them properly.
I flashed to the Sprint stock rom for the Vogue, and still the same issue...
Can someone please help me? I have no idea what to do.
Click to expand...
Click to collapse
Long shot, but did you check the device before flashing anything? Was it working when you got it off ebay?
Did you do a hard reset after flashing WM?
Yes, it was working when I bought it. The receiver is now working (people can hear me when i make a phone call), but the speaker on the back, the one used for speakerphone, is still not working.
I've done a hard reset, nothing changed. I'm going to take it into a repair store and see if it's a hardware issue... I have no idea why it would be though. All I did was mess with the software.
^_^ said:
Yes, it was working when I bought it. The receiver is now working (people can hear me when i make a phone call), but the speaker on the back, the one used for speakerphone, is still not working.
I've done a hard reset, nothing changed. I'm going to take it into a repair store and see if it's a hardware issue... I have no idea why it would be though. All I did was mess with the software.
Click to expand...
Click to collapse
It could be that flashing to Android messed up something in the speaker... again, another long shot!
Hi All.. I posted this in Energy thread in deveopment but I think it is more suited to be answered here... anyone please help before my friend defects back to Apple!
adamelphick said:
OK Strange one here - hope someone can help!
I flashed older cookie on to HD2 for a friend and took phone to her in Malaysia - all seemed well but phone was freezing apparently so her brother went to HTC asia site and downloaded a ROM for it! GRRRR
Anyway it was a T-Mobile rom or something with a '51' radio. Since then when she makes a call she can not hear the other person through the earpiece (but can through the headset!) , but CAN hear a busy tone if the person is already on a call when she calls!
So I flashed latest Cookie Dinik style back on and replaced the Radio with 2.07.50.** and still the same!
I don't understand how the earpiece can make the busy sound but not hear the voice, yet headphone works?! I have connected remotely and used MyMobiler to see screen of HD2 and looked for anything that may be causing it but all seems fine.
If anyone has any ideas please help as she is about to go back to an iPhone after just moving to this HD2 on my say so!
Click to expand...
Click to collapse
hmm thats an odd issue and I would be suprised if anyone else has encountered it :S
are you positive its the ear piece speaker thats making the busy sound and not the loudspeaker on the back of the device?
also have you tried swapping between loudspeaker and normal handset mode? does the call work in loudspeaker mode but not normal speaker mode?
Xp3RiM3nT said:
hmm thats an odd issue and I would be suprised if anyone else has encountered it :S
are you positive its the ear piece speaker thats making the busy sound and not the loudspeaker on the back of the device?
also have you tried swapping between loudspeaker and normal handset mode? does the call work in loudspeaker mode but not normal speaker mode?
Click to expand...
Click to collapse
Good idea with the loudspeaker mode - will ask her to check that. Can't see how a rom flash could cause it - hope it's not faulty hardware!
I had a similar problem with my HD2: I wasn't able to hear my counterpart. I have tried several radio/ROM combinations with no luck. Looking at the test results I guessed it was a sporadic hardware issue of the earpiece. Sent the phone off to service, they confirmed the problem, replaced the earpiece and shipped it back, all free. Great service!
Of course, I had to restore to factory settings beforehand, including the original SPL, radio and ROM. If the phone is still under warranty I would suggest you try a hardware repair.