like to ask whether applications for diamond/pro/HD suitable for use in touch cruise?
any sites got free applications for touch cruise?
i need gprs data counter to prevent me from using over limit.
thx
This phone is a windows mobile (6.1) phone. It is compatible with any windows mobile software. You can look in this forum and elsewhere on the internet, there are plenty of compatible softwares.
There are however some ROM, user interface which are specifically related to one phone and may not be compatible with another. Usually it is indicated as a specific phone software.
thx
lets say if i installed a .cab file to iolite, i realised it's for diamond/pro/HD. Will it hang/corrupt my iolite?
i found some applications but im not sure whether i can use it on iolite. I only afraid crash/hang/corrupt it if i have installed a wrong .cab
*sorry for so many questions..im a new WMuser, my iolite will only arrive nxt week*
the iolite is QVGA, if the software have VGA and QVGA version, you have to choose QVGA...
Related
I cannot start touch flo 3d
I have installed net compact framewort 3.5 in order to run diamond cubes and then today additionally also throttleluancher 0.9.1 and throttle config.
since then I can not start touch flo 3d, wm 6.1 does function normally
please help me I do not to make a hard reset because I am afraid to loose the data , especially tomtom and IGO
i have
XDA diamond
ROM 1.37.207.3 GER
Funk 1.00.25.03
protoc. 52.26a.25.09H
CPU qualcomm(R) 7201A
Uninstall...
Have you uninstalled the software which caused this issue? If your device was OK before installing certain software, try uninstalling it. Also, uncheck TF3D in 'Today' settings and do a soft-reset. Then re-check TF3D.
Make sure you install the latest version of .NET CF 3.5. Get it direct from Microsoft rather than a third-party website.
If none of the above works, you're looking at a hard-reset unfortunately. Let me know how you get on
i just get my htc touch diamond original in malaysia with touch3d ver 1.1.34571.0_1630.38. my diamond is new with original softwares.Previously i used symbian smart phone. But i found some trouble when i use win mobile because i do not understand it well.
i have a few question, i will be glad if seniors in this forum can help me.
my questions...
1)my touch diamond have only 80++mb for my device, remain 3.2gb is internal storage.i found problem when i install software because the message said not enough space. so can i install the software on "internal storage"? or can i do a new partition that make my device 1gb?
2)how to use .cab files?
3)if certain software that come in .rar @ .zip format, how to install in my diamond? (just extract it in paste into the diamond or have to install using active snyc?)
4) my original set come with activesnyc cd, but can only work with window xp, but my os is win vista....how to solve it?
5) i found that my diamond is damn slow, i found the forum " List of Diamond Tweaks " that can increase the performance of the diamond, but i can't found registry editor in my diamond.
6)the g sensor seem very great, but actually how to use it?(i only found it work in opera browser, how to use it in games likes need for speed undercover?)
7)the footprint add-on, i like to have it on my diamond. it is ok to work on my touch diamond?
8)the gps softwares, the pda shop give me the QuickGPS. but how about other like Papago , copilot n navitel?actually how it works?
9)i saw the new touch diamond2's ui, with is better than the one in touch diamond1. can i install the diamond2 ui into diamond1?(worried about it because the RAM n ROM in diamond 1 is smaller than diamond2, screen size also smaller)
thank you very much for reading my post.
Ok, welcome and use the search button up ther that it will solve almost all your future doubts...for now, i'll tell you what i know.
1)YOu can install the softwares on the internal storage, but not the "System" ones, like Opera, Touchflow 3d and others. You will see, if you install it and it doesn't work, uninstall and reinstall it on the device
2)Just tranfer than into the memory (any, storage or phone) and click the file on the phone.
3)Extract it on your computer, if it's a cab, do step 2. If it's a folder with an "EXE" file, double click it. If it says "not a valid win32 aplication", just transfer to the memory and execute the "exe" through the phone explorer. If it's a windows installer, connect your phone through the activesync and install it.
4) http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-download.mspx
5) There is no built-in, download and install the PHM Registry editor or TaskManager or any other. This is my personal favorite: http://freewareppc.com/utilities/taskmanager.shtml
6)The first one is my favorite:
http://forum.xda-developers.com/showthread.php?t=466858
or
http://forum.xda-developers.com/showthread.php?t=403939
or
http://forum.xda-developers.com/showthread.php?t=427805
7)Can't say, never used it.
8)On my diamond i have Igo 8 (http://www.igomyway.eu/product_4.html) and works perfect, just like a Gps-only tool. I also know that some others like Destinator and TOMTOM work really well.
9)Not yet finished, but it's being ported:
http://forum.xda-developers.com/showthread.php?t=493531
Use the search and read, tons of posts...that's the only way to learn!! I didn't had some of these answers, and took me about 5 minutes to find them all, so do it!!
thanx....
now got new problems...
just done hard reset and program installed in internal storage can't use anymore...any solution than reinstall..
thanx a lot
HTC Touch Diamond ROM update (2009)_SEA
Release Date: 2009-01-16 Category: ROM Upgrade
An updated ROM is now available for HTC Touch Diamond users to download. As always, HTC is committed to providing customers with the best possible mobile experience.
Installation Instructions:
ROM version: 2.03.707.2
Radio version: 1.09.25.23
Improved Functions and Fixes
1. When you launch the Camera while the system is working on other programs, the preview screen may become black.
2. When playing a video, sometimes a portion of the video will be cut off a little bit.
3. Fixes Audio playback problem with the speaker. Specific issues: sometimes the music will turn off and on after 10 minutes, or there is a buzzing sound or no sound at all.
4. Fixes the problem of not being able to receive MMS when in standby mode.
5. When launching music via the Music tab on TouchFLO 3D, the sound may intermittently turn off for a second and come back on.
i found this but not sure should i upgrade the rom....
current version is 1.93.707.1
the official rom is better or the cooked rom is better....
i have no problem wit my diamond because it is original set n still under warranty, moreover, the pda shop also offer lifetime software support...mean that if any crash happen they can help reformat for free....
should i use cooked rom?
any recommendation for cooked rom?
which one better n more stable?
mygreatdiamond said:
thanx....
now got new problems...
just done hard reset and program installed in internal storage can't use anymore...any solution than reinstall..
thanx a lot
Click to expand...
Click to collapse
Hard reset delets all registry entries. Need to reinstall the programs.
mygreatdiamond said:
i found this but not sure should i upgrade the rom....
current version is 1.93.707.1
the official rom is better or the cooked rom is better....
i have no problem wit my diamond because it is original set n still under warranty, moreover, the pda shop also offer lifetime software support...mean that if any crash happen they can help reformat for free....
should i use cooked rom?
any recommendation for cooked rom?
which one better n more stable?
Click to expand...
Click to collapse
Well, if you do official HTC update from their site with your own S/N you'll not loose your warranty. In my opnion cooked rooms are better, but i won't tell wich one. That depends on the programs you like and how you like your diamond, is really personal and it's a "Forbiden" discussion here. It's up to you to read the posts and see if it's worth it a try.
If you have any more doubts, you can PM me for opnions, but i don't think this thread is a good place to discuss this, cause the matter already been discussed several times.
a few months ago, when i was a regular user of this forum, i saw lots of threads about trinity software and applications, now i cant find them.
anyone knows were to find them?
trinity don't use special software apart from the rom it's std windows moible software which works on all devices
if you seek a special program you can try using search to find it if you recall it's name
I asked this elsewhere, but this is a better place to post i think.
Is it possible to have Windows Mobile 6.0 run on the HTC Touch HD? If so, what ROM would I need? I want an English version. I need to run some software on it which doesnt work with WM6.1 and WM6.5
roms have to be 100% custom made with just the correct drivers for it to work on a device
it would be a first if a rom cooker spend too much time cooking an older version then what came with the device be it wm6 or wm5 for that matter
so would not hold my breath
Shame, we needed to get ~80 of these downgraded to WM6.0 for the software to work. I wonder if Orange would accept 80 returned phones
Have sw compatibility problems? I used on WM6.1 all programs from WM5 w/o problems ^^
80 Devices? You could PM directly a cooker and ask him about your problem: you could find a solution
D'rath
avisonjohn said:
Shame, we needed to get ~80 of these downgraded to WM6.0 for the software to work. I wonder if Orange would accept 80 returned phones
Click to expand...
Click to collapse
80!?! Holy crap?? What are those 80 HDs used for??
It could be possible but you would need to find WVGA resolution files for the WM 6.0 SYS build first. I don't think there were any WM6.0 WVGA devices.
Got a load of phones that we issue to satellite engineers for work. We have a bit of software than rubs on the phones and the engineers use it to get customer information, allocate stock to the customer, activate the customers hardware and subscription services ect.
We have never been able to get it to work with WM6.1 or WM6.5
It gives some error about graphics or display or something along those lines.
We currently use the HTC Kaiser (TyTnII) which came with WM6.1 and we had to flash them all to WM6.0 for the software to work.
Without the software, all the staff are unable to work.
Also, is there a way that I can install certain software and configure settings on a windows mobile device, then make a backup of that device and flash it to all the other devices? Its just that having to flash 80+ devices to windows 6.0 and then install framework, then software, then setup messaging and GPRS settings and a few other dependencies can be time consuming (about 30mins per device). When this is done for 80+ devices, well....you get the idea...
Have you tried WVGA fix?
http://forum.xda-developers.com/showthread.php?t=455974
With this you can change the screen to VGA which the program might work with.
avisonjohn said:
Also, is there a way that I can install certain software and configure settings on a windows mobile device, then make a backup of that device and flash it to all the other devices? Its just that having to flash 80+ devices to windows 6.0 and then install framework, then software, then setup messaging and GPRS settings and a few other dependencies can be time consuming (about 30mins per device). When this is done for 80+ devices, well....you get the idea...
Click to expand...
Click to collapse
Yes, you can do this with backup software like Spb Backup.. it backs up the phone's installed software and registry to a file which you can execute on another phone so that it is restored to the exact same way as on the original phone.
Or you can use something free called Sashimi.
Another thing is, if the ROM has User Customization built in, you can have the ROM look for a file called SDConfig.txt on your storage card, which contains a list of CAB/XML files on your SD card to execute automatically after a flash.
rovex said:
Have you tried WVGA fix?
http://forum.xda-developers.com/showthread.php?t=455974
With this you can change the screen to VGA which the program might work with.
Click to expand...
Click to collapse
It will most definitely be the WVGA resolution that is stuffing the software up, all issues with software not running under windows 6.1 on the HD are caused by one of two issues:
1) Software dependencies, ie. Compact Framework version - I have never came across a software dependency issue that cant be fixed
2) WVGA vs VGA resolution, and in this case with it being a graphics issue you will definitely be able to get it running using the WVGA fix quoted by rovex.
All you need to do is install the WVGA fix, do a soft reset and use the program to change it to VGA mode before launching your application which wont work, i can all but guarantee this will fix the problem, of course the only issue is you will have to change the res before launching the app all the time.
I would also suggest you contact the manufacturers of the software (or if its in house contact your in house development department) and tell them to make it work in WVGA resolution, this should only be a minor change, after all they dont need to move all the controls around just ensure it loads even it dosnt use the whole screen.
TheToid said:
It will most definitely be the WVGA resolution that is stuffing the software up, all issues with software not running under windows 6.1 on the HD are caused by one of two issues:
1) Software dependencies, ie. Compact Framework version - I have never came across a software dependency issue that cant be fixed
2) WVGA vs VGA resolution, and in this case with it being a graphics issue you will definitely be able to get it running using the WVGA fix quoted by rovex.
All you need to do is install the WVGA fix, do a soft reset and use the program to change it to VGA mode before launching your application which wont work, i can all but guarantee this will fix the problem, of course the only issue is you will have to change the res before launching the app all the time.
I would also suggest you contact the manufacturers of the software (or if its in house contact your in house development department) and tell them to make it work in WVGA resolution, this should only be a minor change, after all they dont need to move all the controls around just ensure it loads even it dosnt use the whole screen.
Click to expand...
Click to collapse
I tried using that tool, but it still didnt work. Instead I just got a screen saying "We're Sorry" and something about cprog.exe has stopped working.
We have been told that it needs to be run on version 1.81.61.2 on the Kaiser, apparently this is the display or graphics version or whatever that is required for it to run, but im thinking this is the number that shows on the bottom right of the device when powered....
Anyway to find out exactly whats causing this error or any other work around?
avisonjohn said:
I tried using that tool, but it still didnt work. Instead I just got a screen saying "We're Sorry" and something about cprog.exe has stopped working.
We have been told that it needs to be run on version 1.81.61.2 on the Kaiser, apparently this is the display or graphics version or whatever that is required for it to run, but im thinking this is the number that shows on the bottom right of the device when powered....
Anyway to find out exactly whats causing this error or any other work around?
Click to expand...
Click to collapse
I would suggest talking to the developer/manufacturer of the software your trying to get to work to see if they can modify it to work WVGA resolution. This would most likely be your easiest route, especially when all new devices will be on wm6.5 or later and not compatible with wm6.0
Fallen Spartan said:
I would suggest talking to the developer/manufacturer of the software your trying to get to work to see if they can modify it to work WVGA resolution. This would most likely be your easiest route, especially when all new devices will be on wm6.5 or later and not compatible with wm6.0
Click to expand...
Click to collapse
Yes, if the WVGA fix dosnt work then I can only assume that the software has been specifically designed to be locked to only work on the Kaiser phone, the only way you are going to fix this is to contact the manufacturer or employ a software engineer to reverse engineer the software and make it work on the HD, which could be costly and time consuming.
i'm using toshiba G810..wm6.5.3
i have a question that is can my phone use sense 1.2/1.5/2.1
how can i use sense?
another qusetion.i crashed when i use xdandroid..
is there any method to help me to use android? i dont' want android kid..
please help me!
From what little information I can find about your device, I doubt you can run Sense on your device. The G180 has a QVGA screen, so it won't be able to run any version of TF3D other than the original QVGA port of TouchFLO 3D. It's probably not going to work though, as TF3D pretty picky about what it runs on, what requirements it has, etc. My advice is that it's not worth it, and you should maybe look of TouchFLO 2D.
XDAndroid is designed for a select few HTC devices, like the Raphael, Blackstone, Diamond, Rhodium, and Topaz. XDAndroid will only work on those devices at this time, as hardware support must be added for each additional device for it to work. Using it on another device, like your Toshiba Portege G180, will not work. The only way for it to work is if developers port XDAndroid to your device, there's nothing you can do to make it work.