Problem formating the SD card - Touch HD General

I experienced a lot of annoying lag (it was caused by unknown issue with SD).
I tried to format it with PocketMechanic but i get this message.
"Failed to format volume "Storage card". Reason for the failure:"Error code: 0x1f, A device attached to the system is not functioning". (note that i can add, delete and modify files on the card.)
tried SKtools version 4.4.xx but cannot find the format section.
Any suggestions?

Hello
I haven't tried pocket mechanic yet.
But some files are corrupted on my SD card.
How do we format it ?

Have any of you tried doing a search before posting new threads etc?
Try doing this next time before posting.
Thanx
Quick 2 sec search and found this
http://forum.xda-developers.com/showthread.php?t=489401&highlight=format+card

Right Fallen Spartan.
I did a first search on the forum, but didn't find the solution. (maybe I didn't used the right keywords)
Searching more in google, I found in the storage tool.
Very efficient !
As I wrote into an another post, problem is solved.
Downloaded st.ppc420.arm.cab (storage tool), and suceeded formating my SD card !
I can use my HD like a USB key again.
Thanks for your link anyway, if someone didn't find the other topic, maybe he'll have more chance falling on this one !

Thanks, worked for me, too.

Related

Very strange,can't delete or add any file on my xda II

Strange indeed, I can't delete or add any file, when I try to do so, the small circle shows up to show that the pocket pc is working, then nothing happing it keeps going round till it blocks. I had this problem before and I solved it with a hard rest. I don't have the intention to hard reset again. Anyboby had this weird problem??
I might add that i can delete the files on my computer through activesync with no problem. I have O2 German upgraded to the T-mobile 1.60 english.. so any clues whatsoever???
What software do you have installed, I would be inclined to do a backup then hard reset, then when reinstalling software check if the problem occurs after each installation of your programs, this might pin it down to a program that is locking all files for some reason.
It seems that it happens randomly, cuz when I made a backup I didn't had this problem.Then when the problem occured I restored but the problem remailned. I have a lot of programs installed I wans doubting Microsoft voice command but the problem remailned after uninstalling it other programs(metro,tomtom 2,finger clix,fullscreen keyboard,sms writer,xcpuscalar,pocketMVP) any of these programs is known to force this problem. Thanks
I don't know that any of these programs by themselves are known to cause this behavior - but sometimes combinations of programs, glitches during installations, or any of a dozen other things can cause abnormal behavior.
I would agree with cruisin-thru . . . the only way to be sure if it is one of the programs you have installed, and if so which, is to do a hard-reset and install the programs one-at-a-time, giving some time for testing between installations.
Same problem here
Yep - I have had and currently have the same problem.
Uninstalling programs does not help, only a hard reset and then reinstall one by one testing as you go.
I have done a hard reset in the past, but never built it back up to the same spec, so have not pin pointed an app (if it is an app)
It may help if you compare to my install list ??
Let me know how it goes,
Ian
Adode Acrobat Reader 1.0
Astraware Bejeweled
Astraware Bookworm
Belkin WPDAK
Boma Software Reversi Game for Po...
Fonix UK Roger (2 MB)
Fonix VoiceDial 1.2 EN
Macromedia Flash Player ActiveX
Microsoft Money for Pocket PC
MTUX RingToneX
Pocket Bluetooth Tools
PocketMac_CEWindows.Net RegKin...
Realnetworks RealOne Player
SanDisk Wi-Fi SD Card for WinCE 4.00
SBSH.net Birth2Day
SBSH.net Calendar Plus Proffessional
SBSH.net iLauncher
ScaryBear Software Check Notificati...
Smartphone4u Extended ROM Switc...
I have also had, but removed now:
mov Software imov Messenger(tm)
>Strange indeed, I can't delete or add any file, when I try to do so, the >small circle shows up to show that the pocket pc is working, then >nothing happing it keeps going round till it blocks. I had this problem >before and I solved it with a hard rest. I don't have the intention to hard >reset again. Anyboby had this weird problem??[/quote]
I think that there is a bug which appear only when you use the SD card slot.
I've the same strange randomic problem, the workaround is:
- Remove SD Card
- Softreset
- Reinsert SD Card
At least, you don't need hard reset anymore
I think that there is a bug which appear only when you use the SD card slot.
Click to expand...
Click to collapse
All I can say about that is that I use SD cards extensively, and I have never experienced the behavior that whafni77 describes. It could be . . . but I'm skeptical.
Maddoc ur the man, it really resolved the problem and u made me feel small not having thinked of that. For the rocord the only program in common with InaF is Pocket Bluetooth Tools, don't know if it has something to do with it. Thanks guys
Well what do you know!!!
Well Maddoc, this just goes to prove you learn something new every day!
o I tried to delete a file in File Explorer - it hung
o I killed off File Explorer from the running program list - probably not required, but just to prove the file had really been deleted
o I ejected my SD card - a very cheaply made one
o Soft Reset
o Tried to delete another file - and it worked !!
o Inserted the SD card
o Tried to delete another file - and it worked !!
I'm very happy, and the confusion as to why it is acting like this will soon disappear.
Thanks again!
That's the good part, the bad one is that you have to pull out the SD card every single time you do a soft reset, but I'm satisfied with that until someone knows what the heck is going on.
BRosenow said:
I think that there is a bug which appear only when you use the SD card slot.
Click to expand...
Click to collapse
All I can say about that is that I use SD cards extensively, and I have never experienced the behavior that whafni77 describes. It could be . . . but I'm skeptical.
Click to expand...
Click to collapse
Just to add some extra informations...
In my office there are 2 qtek2020 users, me and another friend.
The only differences between devices is that i use SD cards regulary and only my device is having this kind of problem, the frequency of this problem arises when i use TOMTOM navigator and the maps are stored in SD card.
The results are the same with my 256mb sandisk and 128mb pretec.
Seems that at some point the QTEK2020( and i think also mda/imate etc... ) is unable to "receive" file change notifications( or something like that ) and the results are:
1) You can't delete file with "file explorer"( hourglass loop )
2) If you write a new note and save it, you can't even see the note on the list !!!
3) If you install another application, the program group/start menu is not updated !!!
BTW i've just reformatted my 256mb sd card with flashformat two days ago, no problem for the moment but i'm not using navigator now...
Thanks to all
I stand corrected! Partially anyway . . . :wink:
Since I do not use TomTom Navigator (or any other GPS software for that matter) it is conceivable that the software is corrupting the FAT on the SD card.
Have you tried using StorageTools (or other similar software) to scan (automatically fix all errors) and defrag the SD card to see if it has any effect?
Well I formatted the SD card(pdc 256) with storage tool and fixed all errors(tried fat32&16) but the problem still there. The thing remains to try is to uninstall TomTom2 along with the Gps software to see if it solves. :?:
A key point here is that even uninstalling might not solve the problem. It is a sad fact that many times when you uninstall a program, both on PCs and PPCs, it is not uncommon for registry entries to be left behind, unnecessary .dlls and other files to remain, and some files that were overwritten by newer (or older) versions to remain as well. This is why several of us have stressed hard-resetting the device . . . it is the ONLY way to be sure you are starting from a known platform.
SD problems
I've only seen these type of problems if I haven't first formatted the card in the target device first.
Well finally the problem resolved. I should say the hint that mrg2003 gave is really the solution,in other words you should not format the card from the device but rather from the card reader(fat and not fat32) and bingo no more blocks. I should say this forum is great. Cheerz :lol:
Re: SD problems
mrg2003 said:
I've only seen these type of problems if I haven't first formatted the card in the target device first.
Click to expand...
Click to collapse
I confirm, i formatted my sd with flash format... No problems at all now !!!!
I really don't understand this perfectly right! I have an SD Card and the same problem as all of you state.
What do I have to do? I use the Qtek 2020...
Thanx in advance.
Still have a problem and can someone help me with it!
I formatted the sd card with a lot of tools through the Qtek, like storagetools and flash format.
Afterwards I tried to format through windows format tool!!
But none of them worked and still have the problem of the hourglass..... Can somebody help me? I have a Sandisk 256 MB Ultra II.
Thanx in advance

I found it ! The SD card switcher !!!

I posted a few days ago this message : http://forum.xda-developers.com/viewtopic.php?t=38829
I asked for a sd card switcher. But no response.
I searched all around the web but in vain.
So I decided to search on my hard drive because I had one for smartphone.
It wasn't difficult to find it and I would try to install it on my ppc (SPV M3000) and... it works very well !!!
It's very useful for battery life. Switch on/off the SD as you want. This soft can't be easier than it is.
Install the .CAB file by executing it on the ppc and find the shortcut of the app in \Start menu\Accessories folder.
Enjoy !
Sorry, didn't see your message. Could have written this for you
V
didnt work on mine, cab wont even install. any1 to try extracting it for me??
Note, it gets reset when you eject and reinsert an SD card.
V
almost al my programs and documents are on my 1GB mini-SD card, so I don't think this will be very usefull...
thx anyway!!
CIAO!
VOODOOS!L
Pixel69 said:
I posted a few days ago this message : http://forum.xda-developers.com/viewtopic.php?t=38829
I asked for a sd card switcher. But no response.
I searched all around the web but in vain.
So I decided to search on my hard drive because I had one for smartphone.
It wasn't difficult to find it and I would try to install it on my ppc (SPV M3000) and... it works very well !!!
It's very useful for battery life. Switch on/off the SD as you want. This soft can't be easier than it is.
Install the .CAB file by executing it on the ppc and find the shortcut of the app in \Start menu\Accessories folder.
Enjoy !
Click to expand...
Click to collapse
i'm at work at the moment (so can't try till tonight)
but, what happens if you have set the camera to save to the card and it's switched off?
Hey, I'm searching how to set the camera to save to the card?
I think if the card is switched off, it will save automatically to the internal memory because of my smartphone it was like this !
answer for the camera please.
THX
You can change that easily in the camera app itself. See :
Teach me: How to save camera pictures directly in MEM. CARD?
http://forum.xda-developers.com/viewtopic.php?t=39190
i try this on mine.. no luck... cant save battery life then..
Works like a charm here
Did you guys find the sd card was re-enabled on re-inserting?
V

THE SDHC EncFiltLog file CORRUPTION SOLVED

PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Wow - not bad at all for a first post!
Welcome to the forum!
Thanks for providing a solution!
krnkris said:
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Click to expand...
Click to collapse
Yesterday it happens for the second time that my SD-Card gets corrupt again, the first time it happens with a 8 Gb SDHC Sandisk and now with a 16 Gb.! After a hard-reset.Didn't know before I read this post that this could happen ever!??
And indeed I couldn't write or read on the card or format it again, even with a cardreader!
Both cards are useless about €120,- thrown away, gone
Didn't know before I read this post, that this is an WM 6.1 encription issue. Never used or even tap it.
Now I format another 8Gb like the way you describe here, i hope that when i need to do another hard-reset i can use the card again!
BTW, its a little bit strange to me that there are so little reaction from other users here about EncFiltLog problem?
I hope that there will come a solution in WM 6.1 to prevent that b!llsh!t.
Thanks for the great support, i hope it realy works!
Nice post
I have one more question:
What may happen when I delete this encryption file? Is it possible?
P.S. Sorry for my english :/
Hi Everyone!
The best way, if you purchase a new card, to FORMAT at first.
Then you put in to your phone and try not to teke it out any more.
If you want to use it as USB reader the as I write in my first post
START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok .
In this case you can use the phone as a card reader.
It is speed up the file transfer vs. ACTIVESYNC.
If the card is not recognised ether way then,
because of the too much taking out - - put it back; went to faulty.
You can go back to the store for guarantee replacement.
The EncFiltLog is a problem only if you encrypted the card.
The solution to delete it and use as new card described in my first post.
If you put a new card in to the Phone then this file seem to be created by the OP system.
You can delete with format, but it will come back again and again.
krnkris said:
You can delete with format, but it will come back again and again.
Click to expand...
Click to collapse
Your right, the file is still there again!
But I have also a question about a next( hope not) hardreset on my device!
Is it better to format the SD-card (with USB on the device) before or after the hard-reset to save the further use of the card?
Because in my experience you have to start installing everything over again, because the data on the card was anyway corrupt and useless.
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Valynor said:
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Click to expand...
Click to collapse
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
luckyuser said:
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
Click to expand...
Click to collapse
No as far as I know.
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Phil_123 said:
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Click to expand...
Click to collapse
What do you mean?How do you do?
HI folks, glad to find some peeps who are suffering from the same problem...
The solution here seems not to work for me, as I hard-reset my TouchHD before I found out about that encryption ****up...
Is there any solution that allows you to reformat the card?
Not to mention that I NEVER touched that damn encryption option as I really never trust M$ that far with my data... seems it got me Pwned anyways...
Anyone ever tried to Write M$, tell them what a bunch of wacky Ho's they are and demand a new miniSD Card from them?
sorry for my language but atm I mad as hell as I just lost a 8GB and a 16GB sanDisk...
I experienced a lot of bc during all the yaers messing with M$ stuff but this ****up ins unbelievable...
I had the same problem with my 8gb sandisk.
I would like to add that I was able to retrieve most of my files from the memory card using EASEUS Data Recovery Wizard Professional. You need to do the data recovery before attempting to reformat the card.
Hi guys sorry for messing around in your forum but this post is the closest solution to my problem. I cannot format or save anything to my 16gb sandisk card because of that bloody encryption file. Now the problem is that I'm a Kaiser user and I do not have disk mode in my phone, so has anyone successfully formatted their card without using disk mode?
one very quik question. Does this fix the problem for good? you can use the sdhc card with the phone or will it always end up with menc file?
card unreadable in one night
Yesterday, my sdhc 8gb card was working properly but in just one night something happened to it. In the morning, I came to know that it is not more being recognized by htc hd2. Every time I soft reset or hard reset the phone a message come up saying "Do you want to format this storage card to make it readable? this will permanently delete any files on the card." when I click no nothing happens and phone keeps on working and if I click yes then the card is formatted in just 1 second. I tried formatting the card myself from phone format tool (there is format card tool in tools section of the phone) but it is showing only 30.61 mb instead of 8gb.
After reading this thread, I think the problem is with EncFiltLog. Actually I backup my phone and card yesterday with sprite backup. I also backup EncFiltLog on my pc. Now after hard resetting the phone I delete the newly created EncFiltLog file by the fresh WM 6.5 installation after hard reset. I deleted that file from my pc by using the phone card storage as disk drive instead of activesync and simply shift+delete the file from removable storage in My computer. After that I copied all the phone card backup (including EncFiltLog - old one) on the freshly hard reset phone. Now all of sudden in just one night phone sdhc card is not able to recognized by phone.
Moral of the story: Never backup EncFiltLog. Keep the newly created EncFiltLog file by wm 6.5 after hard reset and copy your all files and folder from card backup to phone card (excluding EncFiltLog) after a hard reset. Don't ever overwrite the newly created EncFiltLog.menc file with old one from backup.
Reason: I think WM 6.5 pairs the newly created EncFiltLog with its some key on phone internal storage. Remember how encryption works? I am talking about public key and private key pairing. I think WM6.5 pairs one key stored in EncFiltLog with another key stored inside the phone interal storage which is itself freshly created after the hard reset but when we copy the old EncFiltLog from storage card backup to freshly hard reset phone storage card, those key pairs won't match anymore and windows mobile 6.5 simply locks up the card.
it is my own opinion.
One more clue
Ok guys, I've got one more clue after googling and reading other threads on this forum. May be HTC is supplying fake 8gb sdhc card with hd2.
I've came on that conclusion because yesterday there was more than 5 gb space left on my phone storage card. In the night RSS Hub software has updated all the feeds and stored those feeds on storage card (I've set feeds to be stored on storage card). I think something has been gone wrong there. May be the actual capacity of this fake storage cards in far less than what is written/claimed on the card (i.e. 8gb). In the night as soon as the RSS Hub stored feed on the card, it somehow corrupted the card FAT writting its data on sectors of the card where it should not be.
Hence the card is corrupted now just showing 30.61 mb instead of 8gb. There exists no solution for this situtation till now. I've sent mail to HTC regarding this on their customer support page. Let's see what would happen now. I suspect either HTC or my dealer would say that the storage card don't come under warranty. Let's see now. I will update the thread soon.
My problem is the same.....
after HSPL I faced "Do you want to format this storage card to make it readable?..." and after that I lost my mSD.
Format Storage Card didn't worked. it shows 30.61MB , Cluster Size: 0KB
also Clear Storage didn't worked...
System > Memory > Storage Card > Total storage card memory: Not installed
Is there any other way to fix this problem? because of my country, it is difficult to use HTC Service...

Flashing prob through MC

(sorry if its posted before)
Actually the prob is that i can flash through my pc perfectly .. but when i try flashing through Memory card it fails ( no file found and goes to tricolor) i have tried formating the card iv tried using 3 different cards a 256MB , 4GB and a 8BG .. but no luck with any dont know whats wrong ,
an i want to try a few new roms which are only available in MC flashing flavour
i neeed help 27 views an no reply yet
two things...
1. make sure the charge is more than 30 %
2. put the rom file in the root and should be named BLACIMG.NBH
I'm having the same problem as itschemistry, and unfortunately your answer isn't helping me either, drgopoos: my battery is fully charged, the rom file is named exactly BLACIMG.nbh, but on boot screen the message 'no image found' flashes up, and then leaves me with no option but to soft reset. I suspect I don't completely understand where my storage card's root folder is, so advice on that will hopefully solve my (and itschemistry's) problem.
If all else fails, I'll have to flash using my PC.
Bit of help will be appreciated.
Thanks,
mario.sumthin said:
I'm having the same problem as itschemistry, and unfortunately your answer isn't helping me either, drgopoos: my battery is fully charged, the rom file is named exactly BLACIMG.nbh, but on boot screen the message 'no image found' flashes up, and then leaves me with no option but to soft reset. I suspect I don't completely understand where my storage card's root folder is, so advice on that will hopefully solve my (and itschemistry's) problem.
If all else fails, I'll have to flash using my PC.
Bit of help will be appreciated.
Thanks,
Click to expand...
Click to collapse
Some memory cards are not supported. I can't flash from my SanDisk
There's already a thread running. http://forum.xda-developers.com/showthread.php?t=487632
(Well actually 3 now)
mario.sumthin said:
I'm having the same problem as itschemistry, and unfortunately your answer isn't helping me either, drgopoos: my battery is fully charged, the rom file is named exactly BLACIMG.nbh, but on boot screen the message 'no image found' flashes up, and then leaves me with no option but to soft reset. I suspect I don't completely understand where my storage card's root folder is, so advice on that will hopefully solve my (and itschemistry's) problem.
If all else fails, I'll have to flash using my PC.
Bit of help will be appreciated.
Thanks,
Click to expand...
Click to collapse
You have already stated that you are following the proper procedure below. Correct?
* Rename RUU_Signed.nbh to BLACIMG.NBH and copy it to your Storage Card
* Go to bootloader screen
* A messages will popup, push power button to start flashing or Volume down to cancel
Have you read through the thread provide by deepakjohn above?
This above thread solve your problem? Let us know!
I had the same prob.
Tried with the Transcend card that came (8gb HCSD)
Also tried with a Kingston 4gb HCSD with no luck.
Finaly tried with a Kingston 2gb SD (no HC) and it worked fine.
Looks like you need to get a supported mem card as advised above.
Fallen Spartan said:
You have already stated that you are following the proper procedure below. Correct?
* Rename RUU_Signed.nbh to BLACIMG.NBH and copy it to your Storage Card
* Go to bootloader screen
* A messages will popup, push power button to start flashing or Volume down to cancel
Have you read through the thread provide by deepakjohn above?
This above thread solve your problem? Let us know!
Click to expand...
Click to collapse
yeah, i followed the whole procedure, but still i got the message 'no image found'.
i've now given up and flashed via USB instead a little later.
and apologies for not finding the thread that deepakjohn provided, i was searching in the wrong part of the forum. i did read it after it was provided, and i'm sure it would have helped in some way, but as mentioned i gave up trying to flash via MC.
good luck to everyone else.

[SOLVED][Q] Media files on SD card

i have been using nand/zip android roms since the beginning but 2 days ago i got a disturbing issue and i tried many nand/zip roms both froyo and ginger with no luck
whenever i unmount then remount the sd card , gallery and music applications stop recognizing my media files
i currently work around this by copying all media files to new locations but this is really disturbing
can any one assist me please
I'd try backing up the SD, formatting it, then putting your files back on and seeing if the problem persists first
bates_1974 said:
I'd try backing up the SD, formatting it, then putting your files back on and seeing if the problem persists first
Click to expand...
Click to collapse
I already tried that ... and it did not work
come on guys
i really need assistance here
Does rebooting fix it?
No it does the same problem as if I unmounted the card
I also tried "sdrescan" application and it returned with the same problem
Please i need the solution
Try the "Multi Mount" app.
MartijnMM said:
Try the "Multi Mount" app.
Click to expand...
Click to collapse
Already tried that , but with no good
Could be sectors on your card
bates_1974 said:
Could be sectors on your card
Click to expand...
Click to collapse
So you are suggesting me to try another card ?
raoufn1984 said:
So you are suggesting me to try another card ?
Click to expand...
Click to collapse
either that or use a program to give it a full thorough format, not just a quick one
thorough format didn't help
FIXED
Using the program "[email protected] Kill Disk" i "Killed" my SDcard and the formatted it in android and now everything is fine
Thanks for any one who might have tried to help me
raoufn1984 said:
FIXED
Using the program "[email protected] Kill Disk" i "Killed" my SDcard and the formatted it in android and now everything is fine
Thanks for any one who might have tried to help me
Click to expand...
Click to collapse
So you basically did a proper format like already advised. You obviously didnt do a proper oen before and maybe used windows standard full format etc.
In future if you wish to do a proper format of a SD card use Panasonic SD Card Formatter with following settings...
FULL (ERASE ON)
Size adjustment ON
TheATHEiST said:
So you basically did a proper format like already advised. You obviously didnt do a proper oen before and maybe used windows standard full format etc.
In future if you wish to do a proper format of a SD card use Panasonic SD Card Formatter with following settings...
FULL (ERASE ON)
Size adjustment ON
Click to expand...
Click to collapse
I didn't know about this "Panasonic" program , although i did more than 4 hours of searching both in xda and google
anyway , i did try a proper format using a tool from site sdcard.org -or something like that- and it did take about the same amount of time with this "[email protected] kill disk" so I am not sure
anyway, the good thing is that it is now working
thanks anyway
hope you mentioned this program earlier

Categories

Resources