hey there.
ive got a little annoying problem here. sometimes, during a phonecall, my speakers and microphone are muted. it feels like a connection break, but after a few secods everything works as usual and the calling partner can here me aggain (and i can hear him).
im not sure ... maybe its RADIO related. it happend with pretty every ROM i used so far.
any1 got an idea what causes this problem?
Related
Hi all,
yesterday, the following parts of my Uni stopped working properly:
- speakers
- phone speaker
- microphone
Not only was there no sound at all coming from the speakers, but when I made a phone call, I couldn't hear the other person and neither did they hear me. The phone was thus rendered pretty much useless. I didn't try it when making calls, but when I turned on music, it played without problems when I plugged in the headphones.
Reseting didn't help so I reflashed the unit.
Everything was fine wor a while, but then the problem occured again.
This time, reseting the device solves the problem, but only for a few minutes - then the sound stops working again. EDIT: oh and now I also discovered that it starts working again at some times for no obvious reason and goes back to not working in a short while *CONFUSED*
Does anyone have an idea what it could be caused by and how to solve it? Many thanks!
I had a similar problem earlier.Try putting ur headphone jack in and out a few times,this generally sorts out the problem.It has to do with a small pin in the headphone socket which diverts the sound to the headset when it is plugged in and the pin has to come back in position when the headset is disconnected.What happens is that the pin gets stuck,so even when u disconnect the headset,it still diverts the sound to headset mode.PM me for more details
Longlife said:
Hi all,
yesterday, the following parts of my Uni stopped working properly:
- speakers
- phone speaker
- microphone
Not only was there no sound at all coming from the speakers, but when I made a phone call, I couldn't hear the other person and neither did they hear me. The phone was thus rendered pretty much useless. I didn't try it when making calls, but when I turned on music, it played without problems when I plugged in the headphones.
Reseting didn't help so I reflashed the unit.
Everything was fine wor a while, but then the problem occured again.
This time, reseting the device solves the problem, but only for a few minutes - then the sound stops working again. EDIT: oh and now I also discovered that it starts working again at some times for no obvious reason and goes back to not working in a short while *CONFUSED*
Does anyone have an idea what it could be caused by and how to solve it? Many thanks!
Click to expand...
Click to collapse
try it with bluetooth, if all sounds work fine, then problem is with the receptacle for the headset jack.
Had this problem myself. Took phone apart and repaired.
GL
Thanks, I guess the problem really was in the headset/external switch. It acted like crazy, switching back and forth for no reason, but when I tapped the headphone jack hard with my finger, it usually got ok.
And for the past few hours, the sound worked perfectly, so it hopefully is ok again now. If the problem comes back, I guess I will take it to the service center and get it repaired - I don't think I'd have the courage to do it myself
Anyway, thanks a lot for your help guys.
Since a couple of days I started to hear some noises in the speaker when calling or receiving a call. It's something like hearing the other person outdoor with the wind blowing, and its getting worse when I am moving.
Any idead what to do before sending Blackstone to the provider? I tried to change rates/bands from 3G/GSM because I played with it before and also reflashed the rom with 1.7 DUtty's - no effect. I think I am gonna reflash the radio - not sure if that would help.
PS I've also checked the speaker in search of hair, dust, debris - it's clear but doesnt sound like. Funny thing - the voice in the headset are perfect also the music is alright so I am getting the feeling that it could be software issue.
Please kindly advise
another strange issue - I did a hard reset and the noise is gone (using the 3g) however when lying down on bed talking through it in the horizontal position I can hear that noise again (although not so loud and often as before which is fine)
could it be the g-sensor issue?
Had The exact same problem with my first 2 touch hd`s. I got both replaced on warranty. The first one worked at first but got gradually worse. The second one came like that. I am now on my third and no problems so far.
Tried everything to fix the first 2. New radios, hard reset. Nothing seems to fix it.
why there's no interference when on loudspeaker or playing music? seems that the speaker is fine.
checked the sim in other phone - fine. WTF? I'll try to reflash the radio tomorrow if not sending it back to be replaced.
How to obtain orange fault code which is needed by my phone provider? call the cs?
I have the MyTouch3g rooted with CM 4.0.4 and I am having an issue with my microphone volume. It works fine in calls for a few minutes, but then occasionally drops to being really quiet to where the person on the other end of the call can't hear me. Occasionally it comes back, but usually the other person hangs up, thinking they've lost the call.
Is this a common problem, and is there a software fix for it? I am pretty sure it happened with other versions of CM and my phone was rooted pretty soon after i got it, so i don't know if a stock image has the same issue.
Any help would be appreciated!
hi,
my girlfriend owns a blackstone that recently started to do some noises, some crackling during calls.
it happens over speaker, loud speaker and even on headphones... but only on calls, because on music player sounds perfectly.
full network coverage, so that is not the problem.
any idea what could be the problem?
thanks
Does the other phone (which u called) receive your voice well and clear?
yes, they ear me well and clear, on every call.
mine does this problem on every call, it´s not problem of the other phone,I can notice the noise even on the waiting tone before other people answer the call
I am not sure, i have never had such a problem but i know that our HD switches gsm to 3g - or 3g to gsm- network continuously. So can it be what causes such a problem? I don't think it is a hardware problem. So you can try restoring to defaults & hard resetting or changing rom. I don't have any other opinion for now, sorry
have you tried another radio rom followed by a hard reset?
after all, the radio handles these things and newer radio often have better call quality.
Got to say i don't make many phone calls so i have no idea when this issues started but here it is...
When i make a phone call the sound cuts out intermittently. It's almost like someone presses a mute button for half a second or so. So i miss maybe one or two words the caller says. They can hear me fine the whole time the issue is just on my end and it is over speaker and regular calls.
I have restored to factory image and it is the same. On the Three UK network.
Was thinking of maybe trying a different sim card to see if thats any better but it's a pain to test. Has anyone got this issue or got any ideas on what it could be?!
ephumuris said:
Got to say i don't make many phone calls so i have no idea when this issues started but here it is...
When i make a phone call the sound cuts out intermittently. It's almost like someone presses a mute button for half a second or so. So i miss maybe one or two words the caller says. They can hear me fine the whole time the issue is just on my end and it is over speaker and regular calls.
I have restored to factory image and it is the same. On the Three UK network.
Was thinking of maybe trying a different sim card to see if thats any better but it's a pain to test. Has anyone got this issue or got any ideas on what it could be?!
Click to expand...
Click to collapse
I am from Canada and am experiencing this problem as well. The weird part is, if I make a call through Facebook messenger or skype, it works perfectly fine...so I don't think it's a hardware issue.
Have you figured out a solution to this problem?