Does X1 support caller ID display?
you mean the number of the incoming??
ya.. unless it is private by network
a litle bit.
but there is Resco Contact Manager 1.10 already released!
Try it, you will love it!
infazz said:
a litle bit.
but there is Resco Contact Manager 1.10 already released!
Try it, you will love it!
Click to expand...
Click to collapse
With or without Resco Contact Manager the X1i does support Caller ID...besides resco contact manager would not have been capable of identifiying calls had it not been supported by the actual device itself.
zxguai said:
Does X1 support caller ID display?
Click to expand...
Click to collapse
Do you have to create multiple thread on the same problem in a single day?
hi,yes,i did.because no one answered my first one....haha
again,Resco Contact Manager doesn't work with my x1 ..........
is it possible that the original rom has issue with this?
use spb phone suite etc.
Or use the touch HD dialer, or use s2u2 both support full screen caller ID
Related
hi all,
i have done the clean install, without the O2 cabs
but i need to install smart dialer as i use my exec turned with the screen facing outwards..
any suggestions on how to get smart dial workin??
thanx,
frz
Sorry for slightly drifting from your real question but do give Imaginet-Fingerclix a try. Though slightly sluggish it provides nice large keys both in Landscape and portrait for convenient finger tapping as well as the ability to send SMS from the same screen.
Regards
thanx smrz,
but i have a large contact database and need to find the numbers of different contacts as it would be really difficult to remember all
thus i need smartdial
i have another program called
quick contacts
Click to expand...
Click to collapse
but it needs smart dialing installed to work..
thanx,
frz
Just install this CAB in Extended_ROM
Enable_VT_RTPlugin_0727_2_signed.CAB
I had managed with this problem within 1 week!
thanx, pocket
will the intellidialer also work?
regards,
frz
Do you mean Smart dialing? Smart dialing is intergrated in this CAB
Hi all,
On my previous device, a Glofiish M700, incoming call window was skinned by Eten, not really beautiful skin but better than MS one.
I've just bought an HTC Cruise and I don't know how I can skin this incoming form. If you can help me, you're welcome
Thnks for all
Nobody has an idea ? I ve searched into forum but no response
I think there is only solution use any SW for contacts with full screen caller function like Photo Contacts Pro or Inesoft Address Book...
Yes but i don't want a photo or a full screen app, I just want a popup like MS one but a skinnable one The ETEN one works great, just intalling an apps, I can't imagine there is no tweak to cahnge this ...
Hi all,
Thought I'd share this with all the X1 fans!
Firstly I am not affiliated to Inesoft in any way.
I tested Inesoft software for the Xperia X1:
http://www.inesoft.com/eng/index.php?in=phone.html
Works beautifully on landscape and portrait. Also replace the "Phone" software. I've been looking for a great Phone app for years, and I must admit that this is really brilliant!
Try it out!
Kind regards,
AvinashDhaniraj said:
Hi all,
Thought I'd share this with all the X1 fans!
Firstly I am not affiliated to Inesoft in any way.
I tested Inesoft software for the Xperia X1:
http://www.inesoft.com/eng/index.php?in=phone.html
Works beautifully on landscape and portrait. Also replace the "Phone" software. I've been looking for a great Phone app for years, and I must admit that this is really brilliant!
Try it out!
Kind regards,
Click to expand...
Click to collapse
Definitely is... i have been using since a while now and performance is superb!
+1 for the Inesoft Phone 4 It's fantastic, worth the money!
I tried different full screen caller id softwares for the X1 like Photocontacts, S2U2, etc but Inesoft is the fastest and feature richest so far. Ringtone sound level is fluctuating but I think this will be fixed in the future (or is this not Inesoft's fault?).
What is Inesoft Phone doing better than Photocontacts? Whats the caller ID photoresolution for Inesoft Phone?
Haven't tried Photocontacts, so can't say about that... but Inesoft is better than anything else that i have tried. Most of them are too slow or buggy to use while others don't look good or have little to offer.
Looking at the screenshots of Photocontacts... i have to say that Inesoft is a winner of it as well - by looks alone.
norti said:
+1 for the Inesoft Phone 4 It's fantastic, worth the money!
I tried different full screen caller id softwares for the X1 like Photocontacts, S2U2, etc but Inesoft is the fastest and feature richest so far. Ringtone sound level is fluctuating but I think this will be fixed in the future (or is this not Inesoft's fault?).
Click to expand...
Click to collapse
Nope... no problems at my end. What version are you using? the latest release (4.4) resolves a couple of bugs/issues with the software.
nurps said:
What is Inesoft Phone doing better than Photocontacts? Whats the caller ID photoresolution for Inesoft Phone?
Click to expand...
Click to collapse
Photocontacts is mostly for caller id and imho with a very standard and poor interface. Inesoft's GUI is a lot nicer (support real skins too) and it can handle (edit) contacts, has favorites view, nice dialer with customizable T9 search (v4.4) that searches in all name field of the contact details, nice call history with sms preview, phone profiles, customizable ringtones per contact or category and so on. Read the features on their page and try it
After reading some of these recommendations I think I will try Inesoft, but I gather its not free.
The best of the free iv come across so far is PocketCM 0.27 with the Modiefied Black Diamond II skin, which was modified for the Touch HD, fanstatic smooth scroll, fits in well with Touch 3D.
norti said:
Photocontacts is mostly for caller id and imho with a very standard and poor interface. Inesoft's GUI is a lot nicer (support real skins too) and it can handle (edit) contacts, has favorites view, nice dialer with customizable T9 search (v4.4) that searches in all name field of the contact details, nice call history with sms preview, phone profiles, customizable ringtones per contact or category and so on. Read the features on their page and try it
Click to expand...
Click to collapse
Most of this photo contacts does too. If it has high resolution caller photos it would try it though..
Some people said Inesoft phone cannot work together with spb mobile shell.
Is it true ? has anyone installed both softwares in X1?
hey i downloaded the trial for inesoft and i have a few questions for you full version people.
When i hit the call button the inesoft dialpad appears with my last call. i start dialing and when i actually hit the call button to make the call the default windows dialpad replaces the inesoft one. is that how the full version is?
Also, when i hit the call button to check voicemail the inesoft dialpad shows up as expected, but as i press and hold 1 there is no further action. how do you guys check your voicemail with the inesoft full version?
methodz said:
hey i downloaded the trial for inesoft and i have a few questions for you full version people.
When i hit the call button the inesoft dialpad appears with my last call. i start dialing and when i actually hit the call button to make the call the default windows dialpad replaces the inesoft one. is that how the full version is?
Also, when i hit the call button to check voicemail the inesoft dialpad shows up as expected, but as i press and hold 1 there is no further action. how do you guys check your voicemail with the inesoft full version?
Click to expand...
Click to collapse
Yes that's how it's supposed to be. Inesoft are supposed to be adding there own dialpad in the next release. The problem they are having at the moment (so they say on their forum) is the 3G video calls. So we'll have to wait and see...
Not sure about the voicemail issue, not had a voicemail since I had it installed to try!
Inesoft with Spb Shell
I know someone asked before whether the Inesoft Contacts buggers up Spb Shell... I can say that it does from experience... I did like the Inesoft setup but it only worked once i had called using the spb shell... then it just stayed after i had finished....
does anyone know of a work around for this? or is there a better software round that will work with spb shell ... the contacts there is good just the caller id is rubbish (as its the standard one for X1)
thanks...
Finger Friendly Friend
I personally prefer FFF. Fastest way to find yr contact.
It works for me now that I've disabled the Xperia dialer. One way to disable the dialer is by using the Schap Advanced Config program. I wonder if I'm the first to figure this out?
Do you have no dialer at all now? Mine has been disabled but I have PhonEx installed and call announcing still doesn't work.
No, I have the original windows dialer. It's actually kind of cool to switch off and see a new dialer, since I didn't like the HTC dialer too much.
Sfkn2 said:
It works for me now that I've disabled the Xperia dialer. One way to disable the dialer is by using the Schap Advanced Config program. I wonder if I'm the first to figure this out?
Click to expand...
Click to collapse
Wow, never tried it because it says needed for video calling.
But in fact I like the windows (6.5) dailer much better than the HTC one.
And video calling is still possible (the same way).
Thanks for the Info, Sfkn2!
PS:
caller announcement confirmed working.
BREAKTHROUGH!
Thanks for the info, but can you hear the called id clearly from the X1?
Sfkn2 said:
No, I have the original windows dialer. It's actually kind of cool to switch off and see a new dialer, since I didn't like the HTC dialer too much.
Click to expand...
Click to collapse
So Caller ID announcing will only work when using the standard WM dialer?
Jasand said:
BREAKTHROUGH!
Thanks for the info, but can you hear the called id clearly from the X1?
Click to expand...
Click to collapse
Yep, very clearly.
WhyBe - It may work with the HTC dialer since call announcement works on the HTC phones, though I haven't tried it personally.
^^^ Thanks, but I only use the stock SE ROMs, no HTC ROMs.
...and what about the X2 ?
Anybody found a way to route the sound to the bluetooth on the X2 yet???
Asked this before in another thread and i was supervised to come here.
I have problem with wm default call history window where backround is not in right place.
Screenshot here.
Cooking with osKitchen.
ROM's 235xx with no Manila, but Titanium only.
Phone_Canvas_Enhancement_4_2_51620111831_0 + SergeyLAR FIX.
Tried other phone canvases too with same problem.
Tried Ameba position fix and it worked partly...
With ameba position fix
picture 1
picture 2
picture 3
Can someone tell me how to fix this small, but annoying problem?
Thx.
its a non fixed trouble in newer builds... dunno why they missed up that screens (they "MSFT") if any fix is posted in other thread we will post it for sure.
+ Que PPC said:
its a non fixed trouble in newer builds... dunno why they missed up that screens (they "MSFT") if any fix is posted in other thread we will post it for sure.
Click to expand...
Click to collapse
Thank You for clear answer.
Xinot said:
Thank You for clear answer.
Click to expand...
Click to collapse
well it is possible to fix it. should be done by someone who knows hex editing
look here
http://forum.xda-developers.com/showpost.php?p=6178217&postcount=14826
I don't know how so i think i'll wait...
btw. Is there a way to replace wm contacts with HTC one without manila?
Xinot said:
I don't know how so i think i'll wait...
btw. Is there a way to replace wm contacts with HTC one without manila?
Click to expand...
Click to collapse
can u ellaborate more on what u want i am not gettin u
srgudhka said:
can u ellaborate more on what u want i am not gettin u
Click to expand...
Click to collapse
Sure i can. Basically this to this.
Or at least contact editor etc links from wm default to htc ones.
Xinot said:
Sure i can. Basically this to this.
Or at least contact editor etc links from wm default to htc ones.
Click to expand...
Click to collapse
those are the new contact cards which are cooked into the rom. u can ask the chef to cook it in the rom
srgudhka said:
those are the new contact cards which are cooked into the rom. u can ask the chef to cook it in the rom
Click to expand...
Click to collapse
Now i didn't understad what you try to say...?
Sure i cook and it's all working with manila, but what i want is make it to work in Titanium only rom. Or is it possible at all? Contact & group editors are there in windows folder and are working ok, but how do i make them work by default? So, when i press add new contact in wm contacts list, how i get this new contact manager to open by default, not wm contact manager.
Xinot said:
Now i didn't understad what you try to say...?
Sure i cook and it's all working with manila, but what i want is make it to work in Titanium only rom. Or is it possible at all? Contact & group editors are there in windows folder and are working ok, but how do i make them work by default? So, when i press add new contact in wm contacts list, how i get this new contact manager to open by default, not wm contact manager.
Click to expand...
Click to collapse
new contact card need to be cooked in the rom. there are no cab files where you can install that.
srgudhka said:
new contact card need to be cooked in the rom. there are no cab files where you can install that.
Click to expand...
Click to collapse
Oh, of course... I have New_Contact_Card cooked in, and it is working ok if i start it straight from windows folder via ContactEditor.exe. Problem is how do i make it work like default editor in normal usage?
A guy posted a solution for the call history in phone canvas.. for HD2 he said pm me if you want to nknow more about to fix it...
here
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
+ Que PPC said:
A guy posted a solution for the call history in phone canvas.. for HD2 he said pm me if you want to nknow more about to fix it...
here
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Click to expand...
Click to collapse
Thx for the tip.
+ Que PPC said:
A guy posted a solution for the call history in phone canvas.. for HD2 he said pm me if you want to nknow more about to fix it...
here
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Click to expand...
Click to collapse
That is for incoming call position fix, not the call history
We still need an expert!
Is there anybody out there, who can fix the problem in the picture?
There is no working fix for Phone Canvas 4_0_52619192725_0
... for wm 6.5.x
Package is QVGA, fixes exist only for vga, wvga, etc....
Call history position is not aliged well, there is a small bar on the top, and an overlap on the bottom.
Please, somebody help fix this for QVGA users!
Yes, this is very annoying bug. I'm using now WM default dialer because of this position problem, and with WM dialer this call history window is in right place.
edit: What i know, there is no fix for any resolutions for call history. At least i have not found it in my WVGA Topaz...
The call history has to be fixed in the same file that the incoming call fix is in
weird... wich version is that? im on hermes QVGA
I have HTC Mega 4.0.52619 phonecanvas and my call history looks diferent than yours
look the pic but my button is not fixed yet scrollbar ok, position ok, caller id no fixed, neither the sipad button.
+ Que PPC said:
weird... wich version is that? im on hermes QVGA
I have HTC Mega 4.0.52619 phonecanvas and my call history looks diferent than yours
look the pic but my button is not fixed yet scrollbar ok, position ok, caller id no fixed, neither the sipad button.
Click to expand...
Click to collapse
Phone Canvas 4_0_52619192725_0 from device MEGA
I have no idea why yours looks different
I got it!!! its due to the xtask app... this app has a positioning fix ... thats why my history screen is position fixed and as a n aside efect the buttons shows a lil then dissapears.. so... i dont care