Hi All
I got Motorola S9 Headset handsfree and when anyone calls me or i call them they get the echo back it is unuseable, i thought let you all know not to get this type of headset for HTC HD and if anyone knows how to fix this issue please let me know.
thanks
I am not able to help much there, but i do not get any issues myself with echo when any calls come though. They work very well for me, my only downside to the S9 is music listening can stop now and then, but thats just an issue with the phone that hopefully be fixed in a new update.
One thing thou i noticed thou, if i turn the phone onto stand by manually using the power button once, then i connect my headset while in standby it works fine, or if i leave it on, again it works fine. Only time is when it goes into standby itselfs.
Maybe worth testing it when its in standby and connecting your S9's
Thanks for replay. could you explain how you mean? connect as stand by.
thanks
By the way I tried on my mate HTC HD as well he got the exact same problem, it is HTC problem
Basically i make sure bluetooth is switched on with S9 off, make sure there all paired up. Then i press the power button once quickly on the HD which turns screen off and into standby mode (cuts off any data connections on mine) Then turn on the S9's which will then connect to the HD on its own. This way works alot better for me using my items.
Related
Using my 8525 for a bit over a month now, and I love the phone. Plenty of hacks/tweaks/edits and the phone is just how I like it right now.
Driving a 2005 Acura TL with the built in HandsFree Link and the phone paired seamlessly.
Recently, I notice that while on a call, sometimes the BT Link will drop and automatically transfer the call to the handset. This only happens here & there, not every call. Once call so far after I hung up in the car, the phone was still on and I ended up leaving someone a 6 minute voicemail of me driving, listening to music.....that can be dangerous!!!
Any help or suggestions?
Thanks,
John
i HAD SOME DISCONNECTS WHEN I RECEIVING MESSAGES..IS THAT IT?
No, it will just drop the bluetooth signal mid-call, then to get the car to recognize the phone again, I have to turn off the car and turn it back on to reset connection.....
johnny--2k said:
Recently, I notice that while on a call, sometimes the BT Link will drop and automatically transfer the call to the handset. This only happens here & there, not every call. Once call so far after I hung up in the car, the phone was still on and I ended up leaving someone a 6 minute voicemail of me driving, listening to music.....that can be dangerous!!!
Click to expand...
Click to collapse
I've had the same problem, only once or twice in about a week, using my Jawbone bth headset. Very disconcerting, but survivable. I can see where losing the car pairing might be a bit more problematic.
I wonder if this is because of the /weak/ Bth stack on the TyTN???
-Humbert
Possibly. I thought I saw some upgrades for the BT Stack on here somewhere but now I cant seem to track them down.
Something about the BT Radio shutting down or going into sleep mode after a while and a registry edit to keep it on at the sacrifice of minimal battery life which is fine by me...
Didn't read you mentioning it, but does bluetooth power off during the breaking of the link? If it does, read on and try the following..
not sure if this will help, but try to disable your auto power off options, uncheck the on battery power and on external power..
I had this solved some bluetooth problems especially using the Hermes Widcomm hack and MSI Blueplayer..
Yes, the BT does turn off, but then on again automatically as soon as the call is ended.
Where are you talking about? Is this in the registry or the BT Settings? I was not sure if the WidComm stack is fully functional as of yet, if so, is it in the Wiki?
Thanks again,
John
The WidComm stack is definitely NOT fully functional yet. One of the problems I have with this stack is that, the bluetooth will power off when my wizard turns off or goes into standby, which is not normal!
Not it is not a registry setting, but it is just how it behaves on my system. Sorry for not being a help... I know how the MS Stack pisses people off..
Best regards,
Eugene
Hey, every little bit of info I can get helps....
Thanks for the info on the WidComm Stack....I might just wait and deal with the MS untill the WC is fully functional and possibly in CAB format....just to make life all the easier!
OK, So today my phone would not drop the BT signal from my car.....after being home for 4 hours, it was still trying to use the HandsFree when recieving or making calls....took me a minute to figure out because the dialer skin I have is black at the top, so I could not see the headset icon at the top and was wondering why I could not hear anyone or use speakerphone.
Hopefully it was just a freak accident and wont happen again, but just incase, any suggestions?
Brought a jabra bt8010 and all is working fine, the only issue i have is that the screen will not go off.... Even when you press the off button quickly to turn it off it comes straight back on. This only happens when the Jabra is connected to it.
Anyone one got any ideas
Problem solved, it appears that there was a tweak i had applied to not go to sleep when within a call, when the Jabra is connected it must think that it is always in a call so the screen never goes off. Just reversed this tweak and now the screen goes off and stays off.
Well, I don't have a BT headset but never seen people having this issue. I think reversing that tweak is just a workaround, there must be another way to make it turn off automatically. Hopefully someone better informed will answer to this.
Anybody got any other suggestions ? Not an ideal fix but a fix none the less.....
I use the 8010 and I had that problem. I deleted the connection in both devices, and paired them again at a greater distance. The phone always communicate with the headset, like sometimes, the headset will come on for no reason. I look at the headset and the music icon disappear, then reappear. I still cant figure out why. Love the headset though. It doesn't come on that much no more, but staying on, no..
already tried deleting it on both ends and pairing, just does the same thing.
caller ID is now working though with the Jetware fix which is really handy.
I didn't want to open yet another Polaris bluetooth problems but none were like mine.
I have the O2 Orbit 2 and I had bluetooth mute problems which were usually resolved with soft reset, I think that ever since I installed HTC's official bluetooth mute fix the mute problems got worse.
Every couple of calls or when I plug something to the mini usb (ear phone, charging, data, etc') my bluetooth is muted, the connection is established and I think I do hear through it but with extremely low volume (less then a whisper, more like back ground noise) the mute almost never fixes itself, it goes on even if I flash with a different ROM!!, what fixes it is playing with turning on and off the connection to the headset while in call or, while in call pluging and removing the wired headset, once it's back, it usually stays ok until (randomly) when I plug something to the usb, at first I though it will never work again (flashing something like 10 different roms...) but this fix is less then convenient, again, sadly the official fix doesn't help.
Anyone knows the return policy to O2 from Germany? I live at Israel so I think it might be a problem...
Same problem for me.
After the original fix, my bluetooth headset is always mute.
I have ordered a new original HTC M200 headset. I hope it will work............
Original M200 arrived today.
Don't work. Always mute.
I have tried to uninstall the original fix without any resultate.
Did you get yours to work?
You can try the on/off trick, I usually call my voicemail when the mute starts and then goto options and turn handsfree off, then again turn it on, sometimes it works after 4-5 tries sometimes after 2-3 minutes...
Sometimes the voice comes back in slow motion!!, I thought at first that it was garbled, but once I have a voice mail of a woman who talked fast so when the voice came back in slow motion she sounded like a very low voice slow talking man.
no, don't work on any headset......
It's a hardware problem ??
Hey guys...just wondering if you guys found a solution to this problem. I have this problem with my touch pro. The A2DP works, but for some reason handsfree through bluetooth is muted and I can't unmute. Hope you guys found a fix and can help me out.
I am looking for a tweak or registry fix/setting to help me with the following problem:
On my parrot bluetooth car kit in headset mode after a call is finished the phone stays on. This is not a problem if you finish a normal call without handsfree because you switch it off manually but when you are driving with the phone in your pocket, the phone is liable to screen presses. I have been inadvertently creating/editing contacts and making notes with the phone in my pocket after use in the car.
The screen autopower off does work if the screen is not activated for a few minutes but the inadvertent screen presses occur within this timeframe.
Any help is appreciated - thanks!
I have a similar problem when using my bluetooth headset (Samsung WEP200)…
When I make a call using the headset the screen stays active, and if I turn it off during a call it turns it self on again after the call has ended. Not fun if it’s in my pocket and it decides to call someone back without me knowing.
Is there a general setting or fix that disables the screen when you answer or make a call with the headset active?
Have you found any solution to this?
aneben said:
Have you found any solution to this?
Click to expand...
Click to collapse
Nope, not yet…
I can’t believe that there aren’t a lot more people with this problem!? It’s a REALLY STUPID problem to have on such an advanced phone like the Blacksone when nearly EVERY basic mobile phone has this feature since the dawn of BT headsets.
This might leave me no other choice than to retire my beloved Blackstone and dig up my old Samsung phone so that I can drive my car safely with my phone in my pocket…
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
aneben said:
There is an app called Touch InCall Screen Tweak. With that you can configure so that screen will go off quickly when answering and ending calls and bluetooth headset is used. It works great for me!
Click to expand...
Click to collapse
I actually tried that app yesterday but didn’t get it working as I wanted. How did you configure it?
I guess I can try it again – would be great if it works!
Well, now I can make a call without worrying about it to end (with the InCall Touch app), but when the call is ended we're back making random calls without knowing to whom.
This amazes me, how this feature can be missing. It’s not something I admit to my iPhone friends who still tries to find something that Blackstone can’t do – cuz this even works on the iPhone!
I'll try tweaking till I or someone else can find a solution to this rather embarrassing problem.
Hello there,
has anyone an idea how to realize this:
blackstone is in standby - bluetooth is activated - bluetooth headset is on - both connected - call comes in - I take the call with the bt-headset - talk - I end the call with the bt-headset - blackstone remains on until the adjusted time for standby is reached
but I would like the blackstone switch into standby mode immediately after ending the call
is this possible ?
greetz
smuggs
This needs addressed - sleep after a call during headset mode
In headset mode the phone does not go into sleep mode or power off automatically after a call. This is a major issue for those of us who leave the phone in the pocket in the car or when using bluetooth headsets. I have finished calls recently and then 5 or 10 mins later my phone would connect to someone random in the phonebook whilst driving which is quite embarrassing "I didnt call you" - "yes you did"!!
In the meantime I am using constant device lock but this is a clumsy solution for what surely MUST be a common problem. Can anyone else not help us out and try to get the device to sleep after a call during headset mode? I would be so grateful for a useful solution that doesnt involve a constant device lock that I dont really need!
Cheers
I'm having the same problem also....
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
the_flyer said:
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
Click to expand...
Click to collapse
ooch aye the noo ...
obviously NOT ... which makes me wonder ... as for me this is a main issue
pimpin' seems to be more important than functionality ... huh?
i guess i will write to htc and see what they r saying
will post answers here
greetz
smuggs
Sounds good man, keep up posted. Its a major issue for me too!
ok folks .. here is the very annoying answer i got from htc support
You recently wrote us about an issue that you have encountered with your HTC Touch HD. There is only one way to instantly set the device into standby mode: please press quickly the power on/off.
what shall i say ... THAT'S CRAP !!!
and i'm still thinking that there must be a workaround ... redefining the buttons or something like that ... any ideas from the specialists in here ?
c'mon guys - help us out here
greetz
smuggs
that's really strange...just tested it.
connection htc/jabra bluetooth.
htc device lock ON.
an incoming call arrives, pick up the call via bt-headset. end the call via bt-headset. phone is immediately locked again (htc own device lock), display is on. after 1 minute also the display turns off.
or do you mean something completely different?
Same here and it feels retarted.
Ooe of the major purposes of a bluetooth headset is to avoid contact with the device. So having to take out the phone or handle it (in a car/office whatever) after a BT call is rediculous.
BT headset drops call
I am not sure if I should pose my questions here but my Jabra BT headset is connected to my Blackstone on standby mode via BT. However, when an incoming call comes, the BT headset does not get the call but is transfered to the HTC handset instead. I have no problems making outgoing calls on the Jabra headset. It's frustrating when I am driving... could anyone tell me how to remedy this?
Thanks in advance.
end call via BT into standby works with LockMeLite
hello there,
with LockMeLite http://forum.xda-developers.com/showthread.php?t=478606 and my samsung wep250 bt-headset
it works
this headset is non-a2dp-capable
dunno if an a2dp capable headset will work, but will test is (next week)
greetz
smuggs
I have tried flashing newer fancy roms and tried various lockers but no applications are intuitive enough to fix this simple fault. When making a call in 'headset mode' the fast sleep mode prevents accidental presses during a call. Unfortunately when the call is ended via handsfree/car kit/recipient, the phone wakes back up to life.
Any locker I have used is active indiscriminantly when pressing the power on button to wake the device from sleep. I have tried lockmelite, hd tweak for inbuilt MS lock, pocketshield and another locker however none have the function to only lock the device whilst in headset mode and after a call has ended. This is a request to developers, expert cooks and modifiers please can anyone help us out?
Thanks a million
Check this, it can do the trick...
h..p://www.pocketshield.net/default.htm
S2u2 V2.04 workes fineas you needs, even look during a call (gives black screen)
I'll do a try
As I have the same request/problem I'll try the following with the help of AGEProfile.
- I create a profile actived when the headphone is connected, when this profile is activated it launches a program named MySuspend so my phone is suspended.
- I create another profile activated when the headphone is connected and there is a call in progress, this profile does nothing but it exists (only)
So when my phone goes connected with the headset (BT) it goes suspended.
When I receive a call it wakeup as normal and the profile is switched to the second one (but does nothing)
When the call finishes, the first profile is activated again and the phone goes suspended.
That's all (and it should work, I just made the setup for that).
Regards,
P.S. sorry for my english because it's not my language.
I also have this same question. After ending the call the screen stays unlocked and will inadvertently call a number sometimes.
I tried
Yes I made a try yesterday evening in real conditions and it work very well
So I'm very happy
I forgot to mention that I also use the Inesoft to have the screen locked when one call come in.
Hope this will be useful for you too
Regards,