hi everybody,
sorry for my bad english i am german living in ibiza-spain.i have the problem that my universal had a problem when i uploaded wm 6.1. i never had any problems doing that but this time it is blockt absolutly dead.by doing hard reset it shows 0 reboot x exit but nothig works out screen is black not even charing possible.it would be great if somebody could help me.thanks a lot and bye bye from sunny ibiza.
p.s.it is urgent i have no other phone or modem.
[email protected]
hi! go to the wiki and try with MTTY tools read about i`m pretty sure that this can helps, greetings!
thank u for the tip.i gonne try that now,tell u later if it workt out.bye
do u maybe know where i can find a working link to download a working version ??greetings from the sun
Use the search button!!
http://forum.xda-developers.com/showthread.php?t=291588
universal out of coma
i,I just wanted to say thanks to everybody,after lot of testing during 2 days my uni is back to live again and right now I write this text with it.greetings from sunny ibiza!!!!!
ps.somebody can send me a link where I can find and download the latest rom and upgrades???I m using right now wm 6.1 pro which I downloaded here in the forum.
bye bye
Related
Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:
im searching for touchflo,or touchcube for my mda 3 wich i flashed to htc blueangel with wm 6 pro on it
please could someone help me with it,i searched for a while on this forum but i couldnt find it
if you help me,and if it works,ill donate
thank you verry much
what you seek is here:
http://forum.xda-developers.com/showpost.php?p=1479895&postcount=11
*it may not work from the first time (sometimes it needs 6 reboots to work)
regards
xplode
wow.awesome,thank you verry much you really helped me
and you answered verry quickly too,thank you
pleaaaaaaaaaaaaaaaaaaaaaaaase
pleaaaaaaaaaaaaaaaaaaaaaaaase
pleaaaaaaaaaaaaaaaaaaaaaaaase
pleaaaaaaaaaaaaaaaaaaaaaaaase
pleaaaaaaaaaaaaaaaaaaaaaaaase
more than 1000000^1000000
any one help me
a have xda mini with german rom so every thing is Germany
please i want any rom 2003 - 2005 - even 2000 works!!!!
please i tried all available solutions but no way
pleade any one give a link to download any english rom
thank tou very mutch
Sir, you're kinda lost.
Check this out, hope this one could help you.
http://forum.xda-developers.com/showthread.php?t=247994
Thats my previous ROM with my Magician before I change phone. ^^
Thank you very mutch i'll try it but i used a ROM for i-mate jam
but the devise didn't work after finishing the upgrade
when i press power + reset the viprator works without any light on screen
i don't know what i have to do but i hope this rom to work
thank you again nasty_42
No problem ya1ss2er3
Regarding the no light on your screen after the upgrade, try to check the Brightness Settings after the upgrade because sometimes the xda mini boots using the AC Power instead of the Battery Power.
thanks nasty
but i meaned with ni lights than my mobile doesn't boot at all there is nothing apears on the screen
the device stopped so i'am looking for a xda II mini English rom but it's not available in O2-Middle East web site
so if you give me a link to download ROM directly
wou will help me too mutch
thank you nasty
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103
Dear Helpers,
thanks for reading this. I have a problem with my MDA Compact from germany. After few months, I wanna used it now again, but If I start, there is a error with "Serial".. If I put it a USB-Cable, there is "USB". The Hard and Soft-Reset don´t work. And If I try to use one of your tutorials, I don´t find the files in /windows/Temp/...
Anybody can help me? I read more than 5 hours, but I can´t repair my cell-phone ):
Serial/USB
v1.00
Thanks and sorry for my bad english!
i think you have the same problem like this guy http://forum.xda-developers.com/showthread.php?t=513486
try to flash your rom on win xp
Thanks for this fast reply... I will try it at a friend.. But which tutorial I should choose, because I have v1.00.
Thanks for helping!
sorry but i don't know what the different is on 1.00 i think there you have to ask other guys who knows more than me. i just had problems flashing with vista and thought this would help you, too
and sorry for my bad english too...