X1a having trouble with Skyfire and Live Messenger - Networking

I've been trying to get Live Messenger and SkyFire working. Live says "failed to synchronise" followed by a dialogue that says there was a problem and that it may be the service or that I have bad reception. I know both should be fine.
SkyFire just sits there alternately saying acquiring data connection and check flight mode.
I have no idea what to do about these, since all other web apps work fine.

OK tried this:
ds07 said:
you have to do this:
Install 10.6.0034.0800 (fixed) - reboot by installer
10.6.39.133 by lazapasi - reboot by installer
Install 10.6.0034.0800 (fixed) again! then softreset and it works.
Click to expand...
Click to collapse
No joy.
Tried this:
josoetgebrook said:
Indeed it works. I first had to uninstall every messenger installation I already did.
After that I installed http://download.microsoft.com/downl...19-A2B5C0707F36/PPC/WindowsLive_NoIM_0409.cab
And at least I installed http://rapidshare.com/files/135218995/Windows_Live_10.6.39.1300_by_LazaPasi.cab
After I installed both programs, I started messenger, but I couldn't log in, I tried to start Windows Live and in Windows Live there is an option 'Tap here to sign in', and with that one, I could log in to messenger.
Click to expand...
Click to collapse
No joy.

Do you connect to the internet through proxyserver?

I tried it at uni today and Live will connect through Wifi, it just doesn't like UMTS. I broke things last time trying to do those methods so I'm just going to use Java ebuddy for 3G messaging (it wouldn't respond to power button, wouldn't sync, etc. ie big problems).
Oh and I've given up on Skyfire for the time being.

FireBird4 said:
I tried it at uni today and Live will connect through Wifi, it just doesn't like UMTS. I broke things last time trying to do those methods so I'm just going to use Java ebuddy for 3G messaging (it wouldn't respond to power button, wouldn't sync, etc. ie big problems).
Click to expand...
Click to collapse
Probably you connect to UMTS through a proxyserver and your provider has disabled the ability the run Live correctly. (I know Vodafone does it)
FireBird4 said:
Oh and I've given up on Skyfire for the time being.
Click to expand...
Click to collapse
Didn't work at uni through wifi?

I didn't try Skyfire at uni since i haven't felt the need to reinstall it since the reset.
Anyway, what you said was right: the "connects through proxy server" box was ticked, which actually also stopped me getting my pop3 email. I just unticked it and watched as all the magic happened. So the real problem here was my ignorance, which has been the case with every single other problem I've thus far had with my X1.
It is a little bit odd though as before I could get email but not messenger.

Related

Pocket MSN error

Every time I try to login to messenger I get
logon to msn messenger service failed because service is not responding
As a test downloaded Agile messenger and it worked first time
Error happens whether I am using usb, gprs or wifi for web access
Skearon,
I get the same problem when using it via GPRS, although Cable and WiFi is fine...
Can I ask a quick question? Are you using a custom email address? i.e. '[email protected]' as your .NET passport? or are you using an actual @hotmail/msn account?
I am using a custom account, *******@*****.me.uk, and this normally causes problems with the MSN protocol (server side applications) the only other way round it for pocket msn would be to create a hotmail account and use that on ur PPC.
Hope that helps a bit?!
Cheers.
peteypye said:
Skearon,
I get the same problem when using it via GPRS, although Cable and WiFi is fine...
Can I ask a quick question? Are you using a custom email address? i.e. '[email protected]' as your .NET passport? or are you using an actual @hotmail/msn account?
I am using a custom account, *******@*****.me.uk, and this normally causes problems with the MSN protocol (server side applications) the only other way round it for pocket msn would be to create a hotmail account and use that on ur PPC.
Hope that helps a bit?!
Cheers.
Click to expand...
Click to collapse
No am using [email protected]
i notice this aswell using wifi, i put it down to the first attempt being the one that loggs me off my laptop and the second the one the gets me connected,
hmmm.. not a clue then, i blame my problem on MSN server side, but obviously not...
Keep me update if you can please!
Using GPRS ( not in 3G area) we logged into MSN with no problem
skearon said:
Every time I try to login to messenger I get
logon to msn messenger service failed because service is not responding
As a test downloaded Agile messenger and it worked first time
Error happens whether I am using usb, gprs or wifi for web access
Click to expand...
Click to collapse
Skearon,
I have had the same problem, but cannot force it to happen.
Use a non hotmail adress on MSN.
But Agile seems to be better. And, I have the impression that Agile recovers better when having been without GPRS signal, like an underground.
MSN mostly did not recover and showed the "tap to sign in" so leaving me who knows how long without being on line.
Huib
Yes I also get this. It happens frequently but not always, and I've got a hotmail.com email.
Moandal said:
Yes I also get this. It happens frequently but not always, and I've got a hotmail.com email.
Click to expand...
Click to collapse
Moandal,
Try Agile..... It (still) is for free. I use it day after day.
Don't change its notification sound however. I have the feeling that that may cause it freezing randomly.
huib

Live Messenger stopped working - can you use it ?

Has anyone used live messenger on the WinMo side more than once ?
I got it to work the first time, without any problem, after this, I always get the error :
service temporarily unavailable. Please check your internet connection, you might havebad reception etc..
But all other internet programs work. Please tell me if you can use live messenger more than just 1 time.
lucid said:
Has anyone used live messenger on the WinMo side more than once ?
I got it to work the first time, without any problem, after this, I always get the error :
service temporarily unavailable. Please check your internet connection, you might havebad reception etc..
But all other internet programs work. Please tell me if you can use live messenger more than just 1 time.
Click to expand...
Click to collapse
WORKS WELL ON MINE, DID YOU HAVE ON OTHER PC LIVE MESSENGER THAT RUN'S AUTOMATICALLY ON WINDOWS STARTUP? IS POSSIBLE THAT ON SHIFT DON'T GOES MSN BECAUSE IS ALREADY RUNNING IN VISTA SIDE OR ON OTHER PC WITH YOUR USERBAME AND PWD.

Touch HD default youtube player connection error

Hey people,
Does anyone have problems accessing youtube videos from HD?
Whenever I open the default you tube application, I get a Connection error message and I cannot view any videos.
But I can sign in to youtube from the account manager.
I have not been able to find any solution for this..
Any help will be appreciated..
Thanks
people...can anyone please help me...please...
scorpionrocks said:
Hey people,
Does anyone have problems accessing youtube videos from HD?
Whenever I open the default you tube application, I get a Connection error message and I cannot view any videos.
But I can sign in to youtube from the account manager.
I have not been able to find any solution for this..
Any help will be appreciated..
Thanks
Click to expand...
Click to collapse
I have the same issue via t-mobile , conect ok via usb pc, who is your 3g service provider
I know in the UK, t-mobile class youtube as adult content. And by default the adult content lock is in place on everyones data service. If you phone t-mobile customer services they can remove this lock for you
I know that vodafone class practically ANY site as potential adult content and you have to get the lock taken off. Perhaps this is the case here too as suggested above? hope it's that simple mate.
Thanks for your help guys..
But I am in switzerland and I use my WiFi connection at home to connect.
Even then the youtube player gives an error.
My HD is not under any contract so I guess no one has locked any stuff on the phone.
The surprising thing is it logs on to my youtube account when I use account manager to sign in.
I have been playing aorund trying to find out the problem but success has eluded me till now..lets see if I find the problem I will post it here..
I have the same problem, am on a good wi-fi connection that works when I use Opera for browsing, but I get connection error with the default Youtube player. I have tried soft reset and removed last installed programs, no luck!
Anyone have a solution
Have you edited your proxy settings in Comms Manager so that you do *not* use a proxy to connect?
I had to do this so that i could use the youtube app on T-mobile.
Petrov.
Same problem on Orange UK, regardless of how I connect. It's been like that since I got it.
mrpetrov said:
Have you edited your proxy settings in Comms Manager so that you do *not* use a proxy to connect?
I had to do this so that i could use the youtube app on T-mobile.
Petrov.
Click to expand...
Click to collapse
Thanks for your quick respond!
I have tried to delete all my connections and then set them up again (with no proxy), but still have the same problem. The strange thing is that everything worked when I got the phone.
Is there any connection settings in the Youtube application? I haven`t found any my self....
Petter
Hi,
install another youtube player. you can find another player here in the forum. it works.
I don´t have so much knowledge about this, but I had the same problem on my own. I think it is realated to the Flashplayer. So soon if i installed another youtube player, everthing from youtube works fine.
Dude10 said:
Hi,
install another youtube player. you can find another player here in the forum. it works.
I don´t have so much knowledge about this, but I had the same problem on my own. I think it is realated to the Flashplayer. So soon if i installed another youtube player, everthing from youtube works fine.
Click to expand...
Click to collapse
Ok, I installed another YouTube player and that one works
Guess I just go for that solution....Thanks!
Petter
youtube connection error
i have the same connection error message. i noticed it when i had my phone unlocked and let the phone update the settings for the new network. suggesting it to see if that can cause this proble. the other youtube arn't as good as good as the original one that comes with phone. but thanx for the tip. plz help
morgin187 said:
i have the same connection error message. i noticed it when i had my phone unlocked and let the phone update the settings for the new network. suggesting it to see if that can cause this proble. the other youtube arn't as good as good as the original one that comes with phone. but thanx for the tip. plz help
Click to expand...
Click to collapse
I had the same problem, tried several solutions with no luck. Started to use the other Youtube player, but as you say it`s not that good. The solution for me was to hard reset the device, and now everything works fine!
I am not sure, but I think maybe the problem was that I had installed several media players (TCMP, DivX, CP) and it became a conflict or something, after the hard reset I only have Core Player as media-software installed (+WMP) and all the other software as before the problem.
Good luck!
Petter
Thanx hard reset worker. my voice recorder software works now too thanx for the quick reply
mrpetrov said:
Have you edited your proxy settings in Comms Manager so that you do *not* use a proxy to connect?
I had to do this so that i could use the youtube app on T-mobile.
Petrov.
Click to expand...
Click to collapse
confirmed, i spoke to a fairly knowledgable person in t-mobile support after i was having issues (he didnt even tell me to sod off when i said i wasnt using their firmware)
turns out on t-mobile they have switched to using a transparent proxy but the connection setup on the htc still puts one in, its enough to untick the proxy and youtube/windows live/activesync among other things start working. I havent managed to get skype going yet but i expected that to be blocked
default youtube player connection failed error message
I am having the same problems with my orange mobile contract. It worked for 2 weeks and im not sure what i did but its now giving me a connection failed error message. I cant seem to find any settings in the player or in comms manager. Im going to ring orange and see what they say.
Tronec, Did you get reply from Orange? I have same issue - Opera fine on WiFi and on "phone" but Youtube "Connection Failed"
I tried everything, never got past the error. Flashing a new rom fixed it, along with a whole load of other things.
Have the same problem. The hard reset didn't work for me. Does anyone have any other suggestions?

Blackberry Connect Works on XPERIA

So guys, I had a BB Bold and it fell and the screen broke. The next day I got the X1 as a gift and I was wondering what features I could put on it. The application that came to my mind was BB Connect and I went through this forum for hours got the application and installed it but I had the pin pending issue so i forgot all about it and got the BB Storm, fixed the BB bold and gave it to my girlfriend.
Recently my storm fell and the screen went bad so I went back to my X1 determined to fix it. Well, the R3A rom was just released so i updated my "vodafonised" x1. Just a note, the vodafone rom was crap. I'm in Nigeria and i could not do anything with it. i couldn't even hook it up to wifi. The GPRS settings were not configurable.
The R3A ROM is perfect. No vodafone crap, and I installed BB connect version 4 and it worked like a charm. I use the MTN Nigeria BIS service.
No Pin pending! The browser works perfect.
My advise, if you need to unleash the power of the x1 then you need to get the ROM fixed.
Please see links I used below.
OPTION A
The R3A ROM and update procedures can be found here
http://forum.xda-developers.com/showthread.php?t=446070
Note: The procedures above didn't work for me. So if you are having the same problems, please check out the procedures below.
OPTION B
R3A ROM here:
http://rapidshare.com/files/163578806/ruu_signed.zip
Update procedures here:
http://forum.xda-developers.com/showthread.php?t=445662
Option B worked for me like a charm
Blackberry Connect here:
http://www.sems.org/entry.asp?entry_id=276
I hope this helps someone.
Very interesting! First, I am new to Blackberry.
Blackberry Connect is an application for Windows Mobile which enables WinMo users to have Blackberry Service? Am I understanding this correctly?
If so, my friends which use and show off their Blackberries gonna be stunned!
can somebody confirm that is working ? We had an "almost running blackberry" thread in this forum.
Confirm: Working
Hi Guys,
It's finally working. When I installed versions .103, .92 and .90 I got the "pin pending" story. Drove me nuts.
I tried the Sems .106, and this works on R3A for me
I noticed that R1A and R2A have a device OS ID which is "HTC-Kovsky"
(this is different to what you can set in the "About", it is the ID embedded in the OS - you need a hex editor to change it, before flashing the OS file back to the phone. See here post 302: http://forum.xda-developers.com/showthread.php?t=294218)
R3A has a device id of SEMC-X1, and this seems to validate against the BB network and supplies a Pin to your device. I have read on SEMS comments that v.103 and previous don't work. So I reckon use .106..
Steps:
1) install .106
2) select sync options
3) install complete, restart
4) upon restart, connect to BB network
5) you might have to wait a few hours, because for me it connected, then disconnected, then after a few hours I went to the status tab in BBconnect, and clicked "disable" and then "enable" to kick start the connection again. Then after a few tense seconds it obtained the Pin..
Default Confirm: Working
Hi Guys,
It's finally working. When I installed versions .103, .92 and .90 I got the "pin pending" story. Drove me nuts.
I tried the Sems .106, and this works on R3A for me
I noticed that R1A and R2A have a device OS ID which is "HTC-Kovsky"
(this is different to what you can set in the "About", it is the ID embedded in the OS - you need a hex editor to change it, before flashing the OS file back to the phone. See here post 302: http://forum.xda-developers.com/showthread.php?t=294218)
R3A has a device id of SEMC-X1, and this seems to validate against the BB network and supplies a Pin to your device. I have read on SEMS comments that v.103 and previous don't work. So I reckon use .106..
Steps:
1) install .106
2) select sync options
3) install complete, restart
4) upon restart, connect to BB network
5) you might have to wait a few hours, because for me it connected, then disconnected, then after a few hours I went to the status tab in BBconnect, and clicked "disable" and then "enable" to kick start the connection again. Then after a few tense seconds it obtained the Pin..
Reply With Quote
I can also confirm that works!!!! Finaly...
Mailing works great, but i cant make to internet browse by bb connection. Any advice?
This is probably something related to the BIS Service - I can't use internet also, but at my company it's not enabled for our devices.
Sapa13 said:
Mailing works great, but i cant make to internet browse by bb connection. Any advice?
Click to expand...
Click to collapse
I do not see any reason why Internet browser should not work. If you are on the BIS package, you will have a new internet explorer specifically for your blackberry connect. It should be in the blackberry folder. I don't know anything about BES>
If you have access to your providers blackberry page, you can try resending your service books. That should send all your settings back to your phone.
netsurfz said:
Very interesting! First, I am new to Blackberry.
Blackberry Connect is an application for Windows Mobile which enables WinMo users to have Blackberry Service? Am I understanding this correctly?
If so, my friends which use and show off their Blackberries gonna be stunned!
Click to expand...
Click to collapse
Yes you are correct. It is for WinMo users.
Now you can show off your WinMo with BB capabilities to your friends and even greater apps.
raduci said:
can somebody confirm that is working ? We had an "almost running blackberry" thread in this forum.
Click to expand...
Click to collapse
Working !!!
damola said:
yes you are correct. It is for winmo users.
Now you can show off your winmo with bb capabilities to your friends and even greater apps.
Click to expand...
Click to collapse
thank you very much!
Calvin H said:
Hi Guys,
It's finally working. When I installed versions .103, .92 and .90 I got the "pin pending" story. Drove me nuts.
I tried the Sems .106, and this works on R3A for me
I noticed that R1A and R2A have a device OS ID which is "HTC-Kovsky"
(this is different to what you can set in the "About", it is the ID embedded in the OS - you need a hex editor to change it, before flashing the OS file back to the phone. See here post 302: http://forum.xda-developers.com/showthread.php?t=294218)
R3A has a device id of SEMC-X1, and this seems to validate against the BB network and supplies a Pin to your device. I have read on SEMS comments that v.103 and previous don't work. So I reckon use .106..
Steps:
1) install .106
2) select sync options
3) install complete, restart
4) upon restart, connect to BB network
5) you might have to wait a few hours, because for me it connected, then disconnected, then after a few hours I went to the status tab in BBconnect, and clicked "disable" and then "enable" to kick start the connection again. Then after a few tense seconds it obtained the Pin..
Click to expand...
Click to collapse
Hi,
but i dont see .106 in the list provided with the link. Should I look elsewhere? A link?
jorao said:
Hi,
but i dont see .106 in the list provided with the link. Should I look elsewhere? A link?
Click to expand...
Click to collapse
hi got it on the updated site. well i actually had to google it, and found it there:
http://www.sems.org/entry.asp?ENTRY_ID=338
http://www.sems.org/entry.asp?ENTRY_ID=338
btw,
1. Is it this particular version u guys are talking about?
2. Do i have to get my network activate blackberry service before i install it?
Sorry if these have already been discussed earlier, but those forums, it didnt work
BTW, i have tried, but havent got BB serv activated yet. I did noticed my phone was behaving weirdly, like screen will turn on at times, a bit slow. i finally removed it.i think it kwwp trying to connect to BB server or something.
Am using ITJE's rom ver 10.3, and device id is SEMC-X1.
cheers
Here it is...
http://www.sems.org/entry.asp?ENTRY_ID=338
By the way, my service provider explained that cannot use it for browsing.... There is in the BB folder BB browser but when i try to use it it opens Opera, and cant establish connection... Any way, mailing is my priority...
But one more thing, i have limited attachment only 60 kb?????
1. Is it this particular version u guys are talking about?
2. Do i have to get my network activate blackberry service before i install it?
!1. yes
2.yes
I had same problems until activated network service, and once when it establish connection and register with BB, everything back to normal...
I'm on custom rom R3A....
Sapa13 said:
1. Is it this particular version u guys are talking about?
2. Do i have to get my network activate blackberry service before i install it?
!1. yes
2.yes
I had same problems until activated network service, and once when it establish connection and register with BB, everything back to normal...
I'm on custom rom R3A....
Click to expand...
Click to collapse
thnx!!!!!! it works!!! i contacted orange uk first, they activated it. i reinstalled the bb connect ver 4.0.0.106 ... after abt 2 reboots, i got my pin no!!!
now the silly part ... is there bb messenger that i can use? i only managed to get my email working.
Will I be able to use Blackberry Messenger with BB Connect? Use PIN to text my friends such a thing.
Can someone make a tutorial for this application for newbie. And yeah same question does it mean we can get bbpin with this bbconnect program
I'm wondering also if once we obtain a BB Pin, could we then use BB messenger on our Xperias...this would finally allow me to mock all of my BB-lovin friends, as I would truly own the world
Installation is very simple. But be sure that you have new rom, on R2a and R1A want work.
Activate with your service provider BB service, download 4.0.0.106 cab from here http://www.sems.org/entry.asp?ENTRY_ID=338, install and wait until reeboot. In my case it immediately connected, but if not try to suspend then resume BB connection in BB folder that will be in bottom right corner on yzour today screen. And thats all folks. Other settings i did on internet site that my provider gave me. ( you can do it on the phone also BB folder-utility click on email settings)
thnx!!!!!! it works!!! i contacted orange uk first, they activated it. i reinstalled the bb connect ver 4.0.0.106 ... after abt 2 reboots, i got my pin no!!!
now the silly part ... is there bb messenger that i can use? i only managed to get my email working.
yes, go to programs folder,blackberry, inside is Internet browser.
and please, inform me do you have limitation on sending attachment, mine is only 60kb

BlackBerry Connect Working on Rhodium

I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
mate, u can just ask the mods to change the title of the other topic....
AirwolfUK said:
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
Click to expand...
Click to collapse
Thanks for your workaround and I managed to get my BB Connect working on my Touch Pro 2 and I am using BIS.
Blackberry Connect is Working on HTC TouchPro2
Dear All,
Rejoice HTC TouchPro2 owners. Blackberry connect for working on HTC Touchpro 2 now. Just follow http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35 this web-link and you will achieve your intentions.
Can't get it working for long on mine
I have followed the instructions given in the link, and can get BBConnect 106 to work on my TP2, but only for a while ...
The BBConnect 106 loads, I get BES connection, email, contacts, calendar, notes and tasks downloaded ... manage to send and receive a few email, then it all stop ... with some very strange behaviour.
I have tried everything I can think of to get it working consistently, but can't manage it. I get the impression that the BBConnect is being loaded some place where it should be ... not very technical I know, but thats the way it appears.
The TP2 I have is a Hong Kong English Language version ... WWE ... not sure if that makes a difference.
ROM and Radio version ...
The version I have on my TP2 are
ROM 1.19.721.3 (51489) WWE
Radio: 3.44.25.27
And to correct my typo in the previous note, I think the BBConnect is being loaded shmewhere it shouldn't be loaded, which is causing other features and functions of the phone to mis-behave ... as an example, I was unable to search for new networks manually ... lost the Roaming flag on the top of the screen (small triangle sign), was always displaying GPRS connection, even when not connected to the network (so E (edge), or G being displayed ...)
I also tried version 104 of the BBconnect, just to see if it was version 106 specific, but this didn't make a difference.
Apart from that, the phone is close to perfect, for me at least ... particularly like the way the screen blanks when you are making a call and put it close to your ear, then comes alive again when you move it away so you can see it and access it. With the TP, I was always putting calls on hold when I put the phone to my ear ... also like the way the speaker phone is activated automatically when you place the phone face down.
Now if I could only get BBConnect to work, it would be perfect
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
HeavyComponent said:
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
Click to expand...
Click to collapse
My company disables sync with Exchange and I can only get work email with Blackberry service. I think it's a common problem.
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
BB CONNECT Messenger?
Can BB Messenger be used with BB Connect?
Windows Mobile 6.5 and BlackBerry Connect
Guys, I would like to hear from someone who understands the 6.6 environment whether you think upgrading into WM 6.5 will allow me to still use the BBerry Connect. has anybody tried upgrading a Rhodium and then try the BBerry?
Quophi said:
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
Click to expand...
Click to collapse
rsacipher said:
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Click to expand...
Click to collapse
RSACIPHER: I had same problem. could not change Model ID. What is Memmaid and how did that work?
Also
C0RNHOLIO: maybe you should look into why this is happening so that your solution works all the time. Mine is a T-Mobile Rhodium.
Thanks to both
And what about a HTC Rhodium with WM 6.5? Try it but didn't get it.
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
AirwolfUK said:
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
Click to expand...
Click to collapse
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have been running BB on my TP2 on 6.1, 6.5 and 6.51 roms with Sense 2.1 and 2.5. They all work, and no, I cannot have multiple data streams so when I use the browser my BB connect shows no connection. If I disconnect data, sometimes BB automatically connects but generally I have to run BB connect, disconnect and reconnect (so I added a shortcut to it on my programs).
For me, using 6.51 and 2.1 gives the least trouble. I dont know why.
BTW I keep getting reminders that there is a new BB Desktop update (5.01).
good idea on adding the shortcut. I have found that it rarely reconnects and I had to turn off the auto update for the weather or I would start missing emails. I hope someone gets a fix for this soon as this is the perfect email phone...
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have two streams (BB & Contract Internet) running at the same time.
I am on UK Vodafone contract so that probably makes a difference
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
Having concurrent connections two 2 APNs simulatiously only works for GPRS (as far as I have observed on all my past and current devices).
So if you want to have BBC and Internet at the same time you need to switch to GPRS only and disable auto band switching for 3G. If anyone knows a way to get concurrent connections working on 3G, please post how.
EDIT: The infos in the follwing post should do the job:
http://forum.xda-developers.com/showpost.php?p=2382465&postcount=37

Categories

Resources