HI Guys
Probably a silly question but is there a setting that can be switched on that would allow phone calls to be ended as soon as you slide down your keypad????????
Cheers
Anyone know if the X1 has vibration feedback (in particular, for the dial pad, when making a call)? Omnia has, but Touch Pro doesn't.
vibration feedback? What exactly are you talking about. Like does it vibrate when you are getting a call?
As in the phone vibrates on each number you press when you're making a call.
Doubt it. Why would you want it to do that?
It kinda helps to 'feel' that you've dialled a number since it ain't a physical keypad.
I know what you mean, I have it on my LG Viewty.
Its a kind of simulated tactile feedback for a touch screen as (obviously) touch screens have no physical buttons .
I m pretty certain that the Diamond has a hidden registery setting that enables "vibrating" feedback.
If thats the case then maybe its possible to enable for xperia.
Someone should do a search in the Diamond section.
Well, someone built an app for this. If there's a registry setting for this then people wouldn't have to use it already.
otherwise it would not be too much work to make an app which detected "keypresses" and vibrated when they happent but vibrations cost battery power
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
Hi, I'm having trouble whilst in a call on my HTC HD2. I'm using a set of headphones with my handset, so when I answer a call my phone stays in my pocket. What I dont understand is when you go to unlock the phone you have to slide it, great. But when your in a call you only have to press unlock??? Which happends quite a lot if it's still in your pocket. It's really getting to me now after a few weeks of use. I've even tried going to the start menu and locking it from there and you get the same scenario... PLEASE HELP.. there must be a way round it ? APPS?
Thanks in advance
Scott
I'll take it as theres no replys that its just a **** part of the phone...
Solved
Just thought id let people know that I found an app for the problem I had.. and it was free. Its called Curtain Call.
hi, threads are washed away fast here. another option is to use S2U2, its a screenlock program also free. it can lock the screen when you pickup a call.
mad
I use S2U2 to lock the screen whilst in a call...it works like a charm
I noticed this only or mainly happens when my phone is my pants pocket. A lot of times if my phones rings and I take it out of my jeans pants.. the answer slider just won't move and the whole screen becomes unresponsive. Sometimes I'd be able to move the red slider a little bit so I can only then slide the green one to answer.
Happened to anyone else?
Also, A question.. Why sometimes screen to answer a caller sometimes is "slide to answer" and other times it's buttons "Answer" and "End Call".. something?! Randomly?!
CyberPunk7t9 said:
Also, A question.. Why sometimes screen to answer a caller sometimes is "slide to answer" and other times it's buttons "Answer" and "End Call".. something?! Randomly?!
Click to expand...
Click to collapse
Slide to answer is when your screen is locked, buttons Answer and End Call is when your screen is not locked (ie you are currently using your phone)
holtenc said:
Slide to answer is when your screen is locked, buttons Answer and End Call is when your screen is not locked (ie you are currently using your phone)
Click to expand...
Click to collapse
uha. got it.
about the problem. anybody else had it?
yeah i had that problem too
>.<
I get this issue from time to time also, do you use widgetlocker by chance?
joeryu said:
I get this issue from time to time also, do you use widgetlocker by chance?
Click to expand...
Click to collapse
No. I'm not using widget locker.
Does the problem happen mostly or only if you were getting the Atrix out of your pocket to anwer? I'm thinking it's got something to do with touching the screen while the phone is ringing.