Helo,
I've got a big proplem, my GT540 doesn't boot anymore it always freezes when the LG sign appears. I have this proplem since I'd tried to change the statusbar font into whiteby changing the services.jar. Hardreset and KDZ Updater aren't working. And I also tried to change the new services.jar to the old with adb but I don't get root permissions.
My phone runs with 2.1 Eclair.
Thanks for your help,
Lucas
Wait, arent the status bar white by defoult ?
No i don't mean the bar I mean the clock, but do you have any ideas to solve my proplem?
Do The Hard Reset With Press The
Vol Up + Search Key (on the right side of the phome) + home button
When I Trie to do the hardreset it Happens nothing! Is there no other possibillity to reset?
You could try fresh install with KDZ updater, that worked for me when I broked the radio and my network didn't worked. If you have troubles geting in to download mode you could try removing the battery and press volume up + camera + power button Just be carefull! Good luck
Sent from my GT540 using XDA App
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Luc-As said:
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Click to expand...
Click to collapse
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
You could also disable your anti virus and use only the back USB ports of your PC. Good luck !
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Luc-As said:
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Click to expand...
Click to collapse
You are welcomed
hi all!
my phone was root, instant a2sd, then it work very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, done, but not change, it can not log on. stand by at "android" screen.
any body help me? what can i do? any way to factory reset by window? script? els..
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
tks for read!
GT540 does not boot
I have followed
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
BUT I get error:
Upgrade error
Wparam:100
lparam: 4008
try booting and then when it is stuck at the lg logo plug it in to your pc and begin the upgrade in diag mode.
It worked for me when i wiped my phone.
Cant get it to start reloading the firmware
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
The upgrade does not start...
Very GOOD now it did it like this.
Start your phone in recovery. Volume down+camera+power, see if the pc sees the device. Start the update tool max it and select emergency and flash again.
This fixed...
Now I need to add spanish to it. Do you know how??
cmora22 said:
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/showthread.php?t=812308
and in folder u see the "updater" file. doubleclick and u have the english KDZ version.
Oh. I need this Fail.rar too.
I have the same Problem. Can anybody reupload?
THX
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
tehbone said:
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
Click to expand...
Click to collapse
yeah, i've got the same problem, i don't know what i can do...
Pleaz help us =(
My PC don't see my phone, my phone stay on 'lg' boot, and can't boot on emergency or hard reset... =/
EDIT: i did it!
You only need to desactivate the LG Android USB Modem (i didn't saw 'Modem' on Device Manager, so i could not desactivate it).
If like me you don't see Modem, you will see it during the period of time during which the device is recognized mod download, ie for about 5 seconds after you plugged in...
I hope it will help someone
PS: Sorry for my english..
Look under modem and you see your phone
At property under tab look your com number remember it
Take teraterm create a connection with your phone you can connect it normally
When you are connected write
AT
( if you see nothing go to setting general and activate ''echo typed only'' )
If your getting OK
AT%FRST%
and the phone does a factory reset
( i'm french so i'm sorry for my english )
Sent from my GT540 using XDA App
I was installing a new rom using the aroma installer and after it installing its stuck on the google screen and cant get out? I've tried using getting to recovery mode but it goes back to google screen again. Can anyone help please??
jonas000 said:
I was installing a new rom using the aroma installer and after it installing its stuck on the google screen and cant get out? I've tried using getting to recovery mode but it goes back to google screen again. Can anyone help please??
Click to expand...
Click to collapse
Plug it in to your computer and install the drivers. Go into device manager and install drivers if they are not already installed. If you need the drivers then go here http://forum.xda-developers.com/showthread.php?t=1766475 and dl and install. Go into device manager on your computer and install drivers from the folder from that program. Once you have done that go here http://forum.xda-developers.com/showthread.php?t=1781250 and follow directions.
I fixed it I tried to see if it re-rooting would fix it and it did. I used the root.exe file in the toolbox 1.5. Hope that helps anyone else in case its happened to them.
Hi guys, sorry for my english, i hope what you can understand me :crying:, but i have a problems with my phone.
1. I downloaded chainsfire 3D in the phone and this bricket it, the phone was stuck in lg logo in black screen, i tried reboot the phone many times and nothing change, no emergency mode, no recovery, only lg logo and no donwload mode
I used the lg mobile suit to restore the phone, i put the imei and the program restore my phone, when the phone is on, appeared an "all auto test - FTM mode" menu, i went out of that opening the menu edit of upper bar, other than that, all seemed well, but...
2. When i dial "#", appears a "hidden menu", but the big problem is when a dial "0", appears the AAT - FTM mode screen again, Its a problem why i cant dial numbers of others operators.
3. I tried install the stock rom manually with kdz, but appears 2 errors: "wparam: 1000 lparam 0" or "extrac file error", in my desktop pc, laptop with windows or laptop with ubuntu using wine.
4. I returned to use the lg mobile suit and use his rom with the dial problems. I used root explorer to find the AAT.apk and AAT.odex, but i cant delete it.
Again, sorry for my english and Thanks for your help ^^!.
note: the lg mobile suit installed the stock rom (V10A_00.kdz, from: lg-phone-firmware.com/index.php?id_mod=22 -venezuela-)
hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
LGE400Addict said:
hi, im new here and i need help i've got a problem on my lg optimus l3. I think my phone was bricked. i can no longer access recovery mode but i still can go to emergency mode. then i tried to use kdz and it try to bring it back to the old l3 which is ginger bread.. oh by the way im using cm9 and sdmerge that time when suddenly my phone restarted and open then restart again.. non stop restarting.. so i decided to format it.. but when i reformat it my memory became 15mb only..
thats the time i tried to use kdz.. but when i used kdz to flash the old firmware im getting an error.. that was the time i can no longer acess my recovery mode. and also when im in emergency mode my pc is not recognizing my phone.. ive redownload and reinstall all the drivers but still no luck..
now i cant open my phone.. it always stuck in lg logo and go to white screen and back to lg logo again..
please someone help me..:crying::crying:
Click to expand...
Click to collapse
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
LG-RDTT_1.0.5.4
IGGYVIP said:
does your phone come-up with blank (black but backlit) screen ?
if it does then you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
dl.xda-developers.com/attachdl/8c343b1d694e531790a4bedc4a0d3dc3/530e4e21/2/5/9/9/9/3/9/LG-RDTT_1.0.5.4.zip
Click to expand...
Click to collapse
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
LGE400Addict said:
ok i will try thanks.. i will let you know immediately. where can i get that LG-RDTT something?
sorry for the bad english
Click to expand...
Click to collapse
my computer doesnt recognizing my phone when in emergency mode..
i dont know what to do in the files ive downloaded.. i followed all the instruction..
can you give me pictures or videos...
my phone is not booting and its going white screen and back to lg logo again..
when i try to use VOLUME - plus home and POwer button.. its stuck in lg logo..
when i connect it in pc in that situation the computer reconize my phone but with some failed installing deivce..
i know im doing something wrong but i cant figure it out.. coz im not an expert..
im losing hope that i can bring back my long time lge400 friend..
How to unbrinck an SM-J510MN using another one that is working to get the files needed for odin.
Does having a working device help me?
When I try to use odin I get the message "Volume Size is Too big"
Thanks
Gianlucas94 said:
How to unbrinck an SM-J510MN using another one that is working to get the files needed for odin.
Does having a working device help me?
When I try to use odin I get the message "Volume Size is Too big"
Thanks
Click to expand...
Click to collapse
Wrong firmware.
I had my original SM-J510MN bricked last night because I tried to install a corrupt or incompatible TWRP image on it, so, in the way all through the hell I did the following:
1. There is no information on Google about this exact machine (MSM8960).
2. I messed up with SmartSwitch PC Software piece of junk by reinstalling the driver which never worked, provided by its own SmartSwitch option menu.
3. That driver installed before was never going to work because you have to boot Windows 7 in a way to avoid signed drivers checking (Pressing F8 at boot).
4. After research I found out that I had to downgrade the SmartSwitch version to a one with the enabled tab "Device initialization".
5. Finally, I had the driver and a correct SmartSwitch version just to realize I had to type the Model name of my device in UPPERCASE because those Samsung engineers didn't realize a normal user may be would type in lowercase ().
6. I typed the S/N (serial number) located on the backside of the phone and I got the message "Please check the model name and S/N, and enter them again". I triple checked the inserted values, to this point I was feeling I'm totally lost.
7. I downloaded at least 10 Gibibytes (Gigabytes but in the right terms) in stock ROMs which none of them worked for multiple and different reasons.
So this beautiful COVID-19 lockdown morning I woke up inspired thanks Jehovah God and I just tried the old way to inspect this whole site by using Google like this: "site:xda-developers.com j510mn" and I found a compatible fully working TWRP that I flashed using Odin v3.14.1 and then the phone booted normally.
While I was looking for a custom ROM then I didn't realize the WiFi stopped working so I am looking for a solution.
2020-06-06
To bring the Wi-Fi back to my device I had to flash LineageOS 14.1, and then you will be able to flash any custom ROM you may find.
I hope this helps, greetings from Colombia.
akira_yuki said:
I had my original SM-J510MN bricked last night because I tried to install an incompatible TWRP on it (wrong device with similar name), so, in the way all through the hell I did the following:
1. There is no information in Google about this exact machine (MSM8960).
2. I messed up with SmartSwitch PC Software piece of junk by reinstalling the driver which never worked, provided by its own SmartSwitch option menu.
3. That driver installed before was never going to work because you have to boot Windows 7 in a way to avoid signed drivers checking (Pressing F8 at boot).
4. After a research I found out that I had to downgrade the SmartSwitch version to a one with the enabled tab "Device initialization".
5. Finally I had the driver and a correct SmartSwitch version just to realize I had to type the Model name of my device in UPPERCASE because those Samsung engineers didn't realize a normal user may be would type in lowercase ().
6. I typed the S/N (serial number) located on the backside of the phone and I got the message "Please check the model name and S/N, and enter them again". I triple checked the inserted values, to this point I was feeling I'm totally lost.
7. I downloaded at least 10 Gibibytes (Gigabytes but in the right terms) in stock roms which none of them worked for multiple and different reasons.
So this beautiful COVID-19 lockdown morning I woke up inspired thanks Jehovah God and I just tried the old way to inspect this whole site by using Google like this: "site:xda-developers.com j510mn" and I found a compatible fully working TWRP that I flashed using Odin v3.14.1
I hope this helps, greetings from Colombia.
Click to expand...
Click to collapse
When you open your device hold power button + Down volume + home button and flash the stock ROM, its a soft brick, not hard brick. J510MN is fully compatible with every version of TWRP.
NecromancerViper said:
When you open your device hold power button + Down volume + home button and flash the stock ROM, its a soft brick, not hard brick. J510MN is fully compatible with every version of TWRP.
Click to expand...
Click to collapse
OK, sorry for not having been that explicit, but I'm going to be right now:
Last night I had a useless phone...
satisfied?
does your correction help in any way? does that help with the initial post at all? is there any difference between hard and soft bricked that could help on that?
akira_yuki said:
OK, sorry for not having been that explicit, but I'm going to be right now:
Last night I had a useless phone...
satisfied?
does your correction help in any way? does that help with the initial post at all? is there any difference between hard and soft bricked that could help on that?
Click to expand...
Click to collapse
I mean, 3.2 and 3.3 versions of TWRP support MN