Would anyone be so kind and post here an MDA Compact "T-mobile.tsk" file (Today theme)?
I recently hard reset my S100 and did not run customization from External ROM (except some .cab files) since I don't like the TMO-style dialer and Intellidialer skins and many other stuff. But, although it may sound strange, I do like the TMO Today theme itself -- I've got used to it... And I don't know, from which .cab file I should extract it. So it wold be simpler and easier to download from here.
Thanks in advance,
Cheers,
ctibor
The cab with T-Mobile sim toolkit, theme, sounds, carrierlogo etc. is
TMNL_Customize_113125.sa.CAB from the 1.13WWE rom. In other roms the version number will differ.
Cheers, M
Ps maybe I can upload/pm the theme itself tonight.
Extracted & attaced it.
Thanks a lot, oltp!
I intended to do the same but have had no time for it so far... So you really have helped me!
I´ve been following with interest the porting of touchflo interface to non-Elf (Touch) devices.
There have been lots of requests for developing a cab with files n settings for such an interface. It has been suceesfully ported to custom ROMs for Artemis, wizard...., but developers say that there is no way to build just a cab.
not being a developer, i would like to know the rationale behind "cab is no possible", as i can not undestand why, if touch flow can be ccoked to a ROM, it can not be made into a cab. Surely there is an explanation.
(i ask this question because i´d rather keep the stock ROM until warranty period is over, but i want to use my device (Artemis) as much as possible without reverting to stylus)
The Problem is that the Touch.dll must be replaced with the one from HTC Touch... this is not possible.
Only before cooking the Rom you are able to replace System DLLs
..
hope this helps
So the solution would be to make an installation rotine that unloads touch dll from memory, ,overwrites it with the replacement "flo" one, and then reload touch dll.
is that a workable solution under MsMobile platform?
Sorry if i´m proposing a nonsense, as i´m no programmer at all (just "hello world" stuff)
I'm not one of the ROM cookers here but I think the system dlls that need replacing cannot be deleted because they are in ROM and therefore, the device needs to be flashed to change behaviour.
damac said:
I'm not one of the ROM cookers here but I think the system dlls that need replacing cannot be deleted because they are in ROM and therefore, the device needs to be flashed to change behaviour.
Click to expand...
Click to collapse
or just the cab being reinstalled after every hard reset?
The touch.dll is different from device to device... so u'll have to have a "touch" dll that fits your device. Another reason is that the dll can not be changed after flashing the rom, has it is protected by the OS (not even using Total Commander...).
I try to overwrite Touch.dll via some program to replace the original Touch.dll.
After replace it, Touch-screen is no respond to any touch on the screen but Hardware button still working ,then I restore my device.
In my idea, I think Touch.dll is device specific and this file take control all of touch-screen. So Touch.dll cannot be replace by conventional method.
We have to rewrite Touch-Flo program to hook on another dll, e.g. Touch-Flo.dll. (This is just my theory) But I don't know "How to do it ?".
Does anyone have idea about it ?
dferreira said:
The touch.dll is different from device to device... so u'll have to have a "touch" dll that fits your device.
Click to expand...
Click to collapse
Well, until Tytn II(Kaiser) is released, the only touch-flo enabled phone that can be bought off the shelf is HTC Touch.
So all cooked ROMs for Artemis, Wizard.....that include touchflo, must include touchflo dlls extracted from HTC Touch ROM.
Then, my understanding is that, as these touch-flo ROM do actually run on devices other than HTC Touch, the dll´s needed must be not so "device specific" but (more or less) generic for QVGA devices without graphics processor (or at least for OMAP 200 devices).
maybe its not only touch dll, but also other files which have to be replaced by files from HTC Touch.
Has any body managed to extract the touchflo files from HTC touch or TytnII??? If yes then kindly post them here. Maybe we can try to put it in other models like Hima..
c_shekhar said:
Has any body managed to extract the touchflo files from HTC touch or TytnII??? If yes then kindly post them here. Maybe we can try to put it in other models like Hima..
Click to expand...
Click to collapse
There a number of ROMs that include TouchFlo in Prophet, Artemis n Wizard xda-dev forums.
i dont know how to extract specific files from a ROM file, nor which files are flo-related files, and have to be extracted.
Surely the cookers of those ROMs can advise and even provide the Flo files.
sirgawain123 said:
There a number of ROMs that include TouchFlo in Prophet, Artemis n Wizard xda-dev forums.
i dont know how to extract specific files from a ROM file, nor which files are flo-related files, and have to be extracted.
Surely the cookers of those ROMs can advise and even provide the Flo files.
Click to expand...
Click to collapse
look in the wizard WM6 forum, there are several kitchen roms and links to OEM packs with all the touch stuf thats needed.
I agree ,
i dont understand why is not possible to make one application just to touchflo,
let´s take some examples:
http://forum.xda-developers.com/showthread.php?t=321242
this stops, but i test and works, only whid some bugs, and is not reali a touchflo
http://www.pocketcm.com/index.php
this one makes touchflo
http://forum.xda-developers.com/showthread.php?t=325223&highlight=iphone+media+player
this one is touchflo application
icontacts is a touchflo application
so...i dont understand why is not possible to make a touchflo cab
i have all this aplications in a s200 wm5!
Marcos200 said:
i dont understand why is not possible to make one application just to touchflo,
let´s take some examples:
http://forum.xda-developers.com/showthread.php?t=321242
this stops, but i test and works, only whid some bugs, and is not reali a touchflo
http://www.pocketcm.com/index.php
this one makes touchflo
http://forum.xda-developers.com/showthread.php?t=325223&highlight=iphone+media+player
this one is touchflo application
icontacts is a touchflo application
so...i dont understand why is not possible to make a touchflo cab
i have all this aplications in a s200 wm5!
Click to expand...
Click to collapse
touchflo requires Touch.dll, and Touch.dll is not an application. Itz part of the OS which is device dependent. Unless someone writes a fully working touchflo cube, managed to remove the current touch.dll with his own dll, then it is portable from device to device.
c_shekhar said:
Has any body managed to extract the touchflo files from HTC touch or TytnII??? If yes then kindly post them here. Maybe we can try to put it in other models like Hima..
Click to expand...
Click to collapse
Hi C_shekhar
Is this can help
http://forum.xda-developers.com/showthread.php?t=321844
The_hesham said:
Hi C_shekhar
Is this can help
http://forum.xda-developers.com/showthread.php?t=321844
Click to expand...
Click to collapse
funny thread in the sense some pple is asking the same again and again.
I would summarize state of art as follows:
-Some ROMs with Touch flo have been developed by forum members for devices other than HTC Touch.
-Touch flo files are available for those who want to cook their own ROM, at least for OMAP devices.
- As today,Touch flo files can not be installed in a device over an existing ROM because installation can not overwrite certain files as they are in use by the system.
Workaround (Yet To be made)would be an installation routine that unloads files to be replaced, and loads touchflo ones. This routine should be performed after every reset, as resets reloads the files from original ROM.
Here are a bunch of cabs to give you the look of the Touch but these won't give you the finger scroll feature.
http://forum.xda-developers.com/showthread.php?t=311225
I personnally don't care for the eye candy on my wizard, but like the touch driver that lets me finger scroll. The OEM packs I've seen bundle this driver with the today plug-in, but there's just a few files specific to the touch driver that can be separated out from the today plug-in.
jorge_culv said:
Here are a bunch of cabs to give you the look of the Touch but these won't give you the finger scroll feature.
http://forum.xda-developers.com/showthread.php?t=311225
I personnally don't care for the eye candy on my wizard, but like the touch driver that lets me finger scroll. The OEM packs I've seen bundle this driver with the today plug-in, but there's just a few files specific to the touch driver that can be separated out from the today plug-in.
Click to expand...
Click to collapse
to get fingerscrolling you'll only need the touch.dll not othere file or regestry setting but somehow it doesn't seem to work for all devices. I don't know why... if it just can't work or no one figured it out yet?
The_hesham said:
Hi C_shekhar
Is this can help
http://forum.xda-developers.com/showthread.php?t=321844
Click to expand...
Click to collapse
No it does not help.....
Is there any Hermes ROM cooked with TocuhFlo?
Gullum , i need help, please.
Gullum,
thnks for the very profecional good work, in all app, roms, foruns, etc.
one question,
i dont need flash my prophet (S200 pt), but i use all the finger friendly applications that we have in xda.
i looveeee the finger scroll applications.
but i have now 1.5 years waranty, and i dont need flash.
just the scrolling feature, the touch.dll, like you say, but i dont now how i need to just install that in my wm5 rom in portuguese.
is there a solution?? a cab, or just put oem files and replace the ones that i have. i use the touchnav application, but i need more, also use the very best iContact v3, but i need finguer scroll in all applications, like the touch
Thanks in advance,
Hi everyone i had the touch it 2.3 rom in my t-mobile wing. I like it for a while because of the cube But i see no point of it SO I SWITCH back to its original t-mobile rom. I search around for simple roms and i found PDAVIET.. I dont really know much about it but i know its a 3rd party rom.. The only things is that i cannot find one that doesnt have the cube in it. Any suggestion guys!
You could make your own its sorta fun if you follow the guideline. I Tried them all and decided I just wanted a trimmed stock rom. I removed the VoiceCommander and My5Fave and a few other things. Applied a the 4mb pagefile mod and I'm very happy. Don't get me wrong all the popular ROM's are extremely well built and highly functional. But I like my system simple and not cluttered with more than I use. I just backup my favorite cab files as Read Only on my memory card and install them as I need them.
PDAViet has the cube...
Ok, I have a solution for you. Try Open Touch here:
http://forum.xda-developers.com/showthread.php?t=347057
There are two versions (with and without cube) and both are very nice, easy and simple install, nice interface, no big issues to worry about. It is based on ITJE's 2.3 ROM, which in turn I believe is the same a stock ROM, only modified! Good luck.
I want TF3D version 2.5 for my diamond with original ROM 2.03 WWE!!!!!!Thanks for your help!!!
Yappppp I want it too
..... and I want the euromillion...!
I want Eva Laskaris!!
fabius88 said:
I want Eva Laskaris!!
Click to expand...
Click to collapse
She is HOT! lol.
when the cab version of the TF2.5 will be available?
What??
Come on guys... the title of this thread states theme [THE]... this is not a theme at all, it's a request [REQ]
PS. While I'm here, I'll add my bit... I WANT IT ALL!!
I will add my voice to this request. While I appreciate the work that the various cooks on this site do (I'm currently using Yozgatg's Gen.Y D2 R4) I would like to have a stock ROM (either 2.03.401.3 or 2.03.405.3) with TF3D 2.1.
I am aware that Yozgatg also has an installation procedure to install TF3D 2.1, but the only problem I've found with it (at least when I do it) is that it takes a phenomenal amount of device RAM! You need to have 20Mb free just to install it, and when I have tried I have been left with about 6Mb free at the end of the procedure. I don't know if this is down to remnants of the original TF3D still being left on the device or what. Compare this to Yozgatg's Gen.Y D2 R4 cooked ROM which, after installing the other odds and sods that I use, still leaves me with about 42Mb free.
Great though the cooked ROMS are, the authors add or take away various components (which is their right, as they are cooking the ROMS to their own needs and then sharing them with the rest of us) e.g. I have flashed a 6.5 ROM before where all the games were missing.
I would really like a stock ROM with an updated TF3D.
Teppic24 said:
I will add my voice to this request. While I appreciate the work that the various cooks on this site do (I'm currently using Yozgatg's Gen.Y D2 R4) I would like to have a stock ROM (either 2.03.401.3 or 2.03.405.3) with TF3D 2.1.
I am aware that Yozgatg also has an installation procedure to install TF3D 2.1, but the only problem I've found with it (at least when I do it) is that it takes a phenomenal amount of device RAM! You need to have 20Mb free just to install it, and when I have tried I have been left with about 6Mb free at the end of the procedure. I don't know if this is down to remnants of the original TF3D still being left on the device or what. Compare this to Yozgatg's Gen.Y D2 R4 cooked ROM which, after installing the other odds and sods that I use, still leaves me with about 42Mb free.
Great though the cooked ROMS are, the authors add or take away various components (which is their right, as they are cooking the ROMS to their own needs and then sharing them with the rest of us) e.g. I have flashed a 6.5 ROM before where all the games were missing.
I would really like a stock ROM with an updated TF3D.
Click to expand...
Click to collapse
I am trying A.Z.T.O.R. ROM final WM6.1 with GEN Y manila 2.1 R1.5..i can tell that i have never seen my Diamond sooo fast and stable (until now) i used mtty to flash i added BWtaskbar that makes also the X button bigger in some apps that helps a lot.The true thing is that i miss WM6.5.1. (Bsb rom i used),but the functionality of the tf3d 2.1 R1.5 is much better for everyday use than Titanium.That's my opinion!
What you're all asking for will never happen.
TF3D 2.5 will never be ported to VGA by HTC so you'll never see a stock ROM with it.
You might be able to install it via cab once XOR have finished porting it but chances are you'll at least need WM6.5 or build 21000 and above. I'd put my money on it that you guys running ROM version 2.03 are not running a build number high enough.
Do some searching before posting too. All these questions have been answered in the TF3D 2.5 VGA thread.
Manila 2.5 will never be availabe as a cab because , there are files which will not fit into 256mb rom (Diamond) , because manila 2.5 would not replace 2.1 , the files are entirely different so additional files need to be added.
I'm using - SUN Y 6.1 - Manila 2.5 Beta 3 by Kisja. Works almost PREFECT. fast and Stable.
Will be more stable with newer release.
http://forum.xda-developers.com/showthread.php?t=565078