Database Users

X-button on the lower-right corner?

As lots of users here I suppose, I mostly use my finger for screen touching and I find it a bit annoying to always drive my thumb all the way up to the upper-right corner so lower corners x-button would be a much better solution. No i'm not that lazy, but driving my thumb up sometimes loosens my grip on the device. Plus, I think that this solution increases working speed as well.
Is there any application which can be used to put an x-button on the lower-right corner of the screen (or lower-left for lefties)? e.g, next to the right/left softkeys.
If this app doesn't exist don't you think it would a great idea for a new one? Thx a lot.

I always use my OK button on the lower panel.. Look at attachment picture.. The OK button acts as a close

baselsw said:
I always use my OK button on the lower panel.. Look at attachment picture.. The OK button acts as a close
Click to expand...
Click to collapse
Oops... I missed an important info: I'm using an hTc Touch so no hardware ok button.. my bad

CarlosT said:
Oops... I missed an important info: I'm using an hTc Touch so no hardware ok button.. my bad
Click to expand...
Click to collapse
I own a Touch too, and I mapped the camera button to OK/Close.
If you still want to have the camerabutton, there's software to add short presses and long presses for different apps

helterskelter said:
I own a Touch too, and I mapped the camera button to OK/Close.
If you still want to have the camerabutton, there's software to add short presses and long presses for different apps
Click to expand...
Click to collapse
Yeah yeah I've already tried all this.. But I think I was precise in what I asked for: A lower-right corner on-screen x-button.

CarlosT said:
Yeah yeah I've already tried all this.. But I think I was precise in what I asked for: A lower-right corner on-screen x-button.
Click to expand...
Click to collapse
Sorry for commenting!

I'm using Atom Exec and just install AEBPlus (Bind softkey) + HandyLaunch (Right menu on Tray) and setup to when i press message key (Atom is multimedia key) then bind to open menu ... so convenience

kodomo said:
I'm using Atom Exec and just install AEBPlus (Bind softkey) + HandyLaunch (Right menu on Tray) and setup to when i press message key (Atom is multimedia key) then bind to open menu ... so convenience
Click to expand...
Click to collapse
Some Screenshot of AEBPlus setting and HL
(Sorry for orientation:
{The Dimension limits for this filetype are 620 x 280. We were unable to resize your file so you will need to do so manually and upload it again. Your file is currently 240 x 320. } so i need to right 90degree)

On other devices I have owned, the red telephone button acted as an OK/Close button, however, on the HTC Touch, a short press closes GPRS connection, and a long press locks the device.
However, it might suit you to change the registry to map this key back to the OK/Close button.
I haven't ever come across something which puts the x button on the bottom right hand side of the screen.

use phm powerToys to add any program (such as a close link) to the tray of your ppc (cab below the url link)
http://www.phm.lu/Products/PocketPC/PowerToys/
or vijay555's tool
http://www.vijay555.com/?Releases:VJTrayLaunch
you may need an app coling tool like this one
http://www.vijay555.com/?Releases:VJOkButt

Ultimate Point UI theme for PocketCM

I wanted my theme to look as much as possible as point UI.
you be the judge
The buttons at the bottom are removed. In stead I have 2 buttons at the top of the screen, the left for contactlist/smscontactlist the right for the option-buttons
--EDIT--
Not 1 but 2 revised versions, because I like you all so much.
Basiclly they are the same, with 1 difference:
Point UI Black BBF - Has a (point UI) bar at the bottom, which is the old favorite-button
Point UI Black NBBF - Has No Bottom Bar, in stead you can use the area between the other 2 buttons (see image).
Changelog:
- Returned the filter-button (in 2 different ways)
- Adjusted the top right button, it should work better now (it's also a little bit wider)
- Adjusted the dailer, it looks better now
- Changed the contact details top-bar, it now has an extra image
Known issues:
- The dailer sometimes keeps acting annoying
- With the NBBF-version, I can't get rid of the black square when you press the filter-button. It disappears again when you see contacts...

thank you

Daanmannetje said:
I wanted my theme to look as much as possible as point UI.
you be the judge
The buttons at the bottom are removed. In stead I have 2 buttons at the top of the screen, the left for contactlist/smscontactlist the right for the option-buttons
Click to expand...
Click to collapse
Is this VGA? If not could you adjust it?

I tried to do anthing with relative sizes, but I don't know if it works on VGA, I think some of the images might be out of proportion.
I don't have a VGA-device, so I can't test it...

THX for the Skin.....but I have found some bugs...
1 ...by opening and closing the application, it opens in dial modus (Is that a normal behave) here the layout between icons and text does not suit each other
2 by long pressing inside a contact i got that (second image)
How can i get the options again..?? i would like to switch back to the former skin.
Used device: HTC Cruise (Orbit 2)

Daanmannetje said:
I wanted my theme to look as much as possible as point UI.
you be the judge
Click to expand...
Click to collapse
I'm guessing you'll like better alpha channel support in 0.19

tene said:
I'm guessing you'll like better alpha channel support in 0.19
Click to expand...
Click to collapse
Yes I will, but it is getting harder and harder to create a working skin without bugs...

qtek_metanol said:
THX for the Skin.....but I have found some bugs...
1 ...by opening and closing the application, it opens in dial modus (Is that a normal behave) here the layout between icons and text does not suit each other
2 by long pressing inside a contact i got that (second image)
How can i get the options again..?? i would like to switch back to the former skin.
Used device: HTC Cruise (Orbit 2)
Click to expand...
Click to collapse
I don't have those problems, it doesn't open with the dail modus here.
If you have serious problems and can't get to the option screen:
- close pocketCM (use the close running programs in WM5/6)
- rename another theme to point ui.zip

Daanmannetje said:
I don't have those problems, it doesn't open with the dail modus here.
If you have serious problems and can't get to the option screen:
- close pocketCM (use the close running programs in WM5/6)
- rename another theme to point ui.zip
Click to expand...
Click to collapse
THX for the recommendation, I've already recovery my old skin again (iPhone-ish v2.6) but anyway i must ask you something, where can the user in your skin reach the PocketCM options..??
I found the colors of your skin very lively

Normally you have 4 buttons at the bottom:
Favorite, SMS/phone, Filter, Options
Now you have 2 buttons at the top:
The phone on the left = SMS/Phone
The arrow on the right = Options
Press and hold options to see 4 extra buttons:
old contacts
options
close
minimize

Daanmannetje said:
The arrow on the right = Options
Click to expand...
Click to collapse
Well, this button has always closed the app...and after when I tryed to reopen the app using the key "contacts" came the dialing option as showed.

normally you had to press the options buttons shortly to get the dail and long to minimize/see options
what you properly did was press it short, which opened the dail and then a second time which minimized it.
When you pressed contacts again, you maximized pocketCM and the dail was still open...

Looks great! I'll try is as soon as possible.

Looks great. Any chance you could skin it black to go with the black PointUI?

Zyphlin said:
Looks great. Any chance you could skin it black to go with the black PointUI?
Click to expand...
Click to collapse
see the first post...

Really great skin, very nice work..

I really like your work man but you have still some little improvements to do
What qtek_metanol was trying to tell you is that when you use the virtual button to minimize the app, and reopen it, you'll see PocketCM open with the dialer on ... But the reason is simple... this virtual button is the same as your option button (but smaller). In fact, the virtual button is in the right up corner (like if it was the cross) and if you want to use it, you click also on the option button which show the dialer.
I don't think that we can deactivate this virtual button so the isue is maybe to move the option button... ?? You're the creative one

Tekka33 said:
I really like your work man but you have still some little improvements to do
What qtek_metanol was trying to tell you is that when you use the virtual button to minimize the app, and reopen it, you'll see PocketCM open with the dialer on ... But the reason is simple... this virtual button is the same as your option button (but smaller). In fact, the virtual button is in the right up corner (like if it was the cross) and if you want to use it, you click also on the option button which show the dialer.
I don't think that we can deactivate this virtual button so the isue is maybe to move the option button... ?? You're the creative one
Click to expand...
Click to collapse
What is the virtual button?
Is there normally a button in the upper right corner? I've tested it with the standard theme and no matter how much I pressed there, nothing happened.
The only thing I can think about is the following:
If you "click" (really short) on the upper right corner = dailpad
If you press (less then 400ms) on the right corner = minimize
If you press and hold the upper right corner = option-buttons
Those are all standard with every theme, just the location of the button changed..
I want the theme to work perfect, and it does for me... except for the dailer screen, it's a bit messed up with the green and red, but I never use it...

Ok so we don't have the same isue...
If I click (less than a nanosecond ) on the right corner : minimise + Dialer
If I press (less then 400ms) on the right corner = minimize + Dialer
If you press and hold the upper right corner = option-buttons
Maybe it's because of my Touch ??

I've tried, maybe you're partly right:
click = dailer or dailer + minimize
press = minimize
press and hold = option-buttons
so the solution for me is to press and not to click
Maybe someone can try to mess around with the timings in settings.ini? I think you can adjust the 400ms and stuff...

holy crap, screen rotated to right!!! URGENT HELP NEEDED

so I've assigned the left softkey button to rotate the screen
worked flawlessly until I installed pocket plus and then I'm curiously rotate the screen to right using the icon from pocket plus
now the softkey button (both right and left) ONLY rotate the screen to rightnot the usual left!!!
I've tried uninstalling pocket plus and softreset
none worked
help!

sorry, I was in panic, I've found the way using registry hacker to undo the 'damage'
Try this:
[HKLM\System\GDI\Rotation]
"LandScapeFixed"=dword:00000001
"LandScapeMode"=dword:00000004 or 1
Now press that button
"LandScapeMode"=dword:00000004 = Left Handed
"LandScapeMode"=dword:00000001 = Right Handed
Cheers
from
http://forum.xda-developers.com/showthread.php?t=261880
well, in case someone's x1 also messed up like mine did

nap007 said:
sorry, I was in panic,
Click to expand...
Click to collapse
We all sometimes are. roflol
We know the feeling

Switching between portrait <-> landscape

Hi forum
Where can i manually switch between portrait and landscape mode? In WinMobile 2002 there was an icon on the bottom bar that did rotate the screen by 90 degrees. But i don't see it anymore. I don't want to pull out the qwerty keyboard everytime i want to switch to landscape mode. Tanks in advance.

Setting - System - Screen

You are able to assign the screen rotation to a hardware key. So it is only one click to rotate the screen
danielham

But this works only for the left and right softkey..if i need thoose i cant rotate, right?

nurps said:
But this works only for the left and right softkey..if i need thoose i cant rotate, right?
Click to expand...
Click to collapse
Use AEBPlus - as far as im aware it is freeware. When I used it I found that it had a very low memory footprint and didnt slow windows down at all (in comparison with say Voice Command). AEBPlus enables you to assign anything to any button, including different states of button press (ie short press, long press, double press). For example I used the camera button half push (which normally controls auto focus) for rotating the screen. If you dont wanna loose your softkeys you could could have single press as softkey, double press as rotate screen have fun!

the problem is that Aeb turns the screen full 360 degrees in 4 steps (starting in the wrong direction)..while the native experia rotate only does the 2 settings you get when you slide it open..which i like more

how assign rotation (Setting-system-screen) to a leftkey

Did you ever get an answer to this? I too would like to know how to assign the landscape/portrait switch to a soft key.
Thanks,
Ian

completelyhis said:
Did you ever get an answer to this? I too would like to know how to assign the landscape/portrait switch to a soft key.
Thanks,
Ian
Click to expand...
Click to collapse
Softkeys are the two silver looking buttons below the screen.
Too change, go to Start > Settings > Buttons > Select either "Left key" or "Right key" and assign "<Rotate Screen>" via the dropdown menu below.

nurps said:
the problem is that Aeb turns the screen full 360 degrees in 4 steps (starting in the wrong direction)..while the native experia rotate only does the 2 settings you get when you slide it open..which i like more
Click to expand...
Click to collapse
If you go to Options -> Screen Orientation and select only 0 and 270 degrees, it will work like you want.

superweijie said:
Softkeys are the two silver looking buttons below the screen.
Click to expand...
Click to collapse
I'm pretty sure softkeys are the functions shown on the bottom of the screen. The two silver buttons are called left and right button usually I guess.
Often those keys will press the corresponding softkey, but they can be programmed to do other things with software like AEB+.

My bad, I meant left/right key. I do know the difference, I just had not had my coffee yet. thanks for the info!

what have I done?

Hi everyone. Noobie here!
When I scroll through the menus on my Treo Pro, to go up and down I have to press left and right on the centre ring button.
Is there anywhere in the menus where I can reset this as it's driving me mad!!
Thanks
Rick

D-Pad: Go up and down, have to push left or right!!!
richardlkay said:
Hi everyone. Noobie here!
When I scroll through the menus on my Treo Pro, to go up and down I have to press left and right on the centre ring button.
Is there anywhere in the menus where I can reset this as it's driving me mad!!
Thanks
Rick
Click to expand...
Click to collapse
I'd love to know if you found a solution for this, as mine started this S*** about a month ago and I have NOT found a solution on my Treo Pro. HELP!

I've had the same thing happen to mine when i tries SPB MS3. I pressed the rotate screen button in the software, and the screen did not change...But the cursor buttons did.
What software have you run?

Maybe you can find the setting of buttons on System or Option? Usually the buttons setting is in the System or Option like my ZorroGPS.

Somehow, you have changed your screen orientation to landscape. search for an app to change from landscape. i had this issue and i dont remember where i found the app. last alternative is a hard rest.

Change registry entry HKLM/system/GDI/Rotation/Angle from whatever it is (in my case 270) to 0
Worked for me.