Related
damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution
I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org
I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck
I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Me too.
I just hard reset. After reading everywhere, this was the only option.
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.
JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks
No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!
Hi
I used to have the TF3D(With tha panel installer) cab installed on my Xperia and it worked fine.
I decided to give Manila HD cab a shot sence people were saying it was working faster.
I did a hard reset and installed the manila HD cab by itje, installed the panelinstaller but when I choose to start TF3D it keeps loading...
I've searched the forum but I can't find the answear.
I wonder if I'm supposed to install the cabs in a certain order for it to work...
Anyone who can help???
Thanks
I was told just quit by clicking "panel" key, and re-select this panel. I haven't tried it, so let me know if it works.
I did try that...it didn't work. I did a soft reset as well but no luck...
I installed the Manila HD cab on my storage card by the way. I don't know if that can be the problem because I did the same thing on my TF3D and it worked fine...
Yes,I gotta the same problem and at last it is solved by re-installing the cab in phone rather than card.
cellulose1986 said:
Yes,I gotta the same problem and at last it is solved by re-installing the cab in phone rather than card.
Click to expand...
Click to collapse
I double that....did the same earlier today and it worked
Hi,
I've been trying to install gyrator and got this message so tested several other CABs and now seem to be getting this message on trying to install any CAB - really frustrating
Any ideas what might be causing this?
My Blackstone configuation is all pretty standard with original ROM etc
Any suggestions welcomed!
try reinstalling the cab again, it should say that it will remove previous installed version and will reinstall, BUT it wont proceed with the installation. Now after this, go back to the remove programs section and check if its still there.
Wondering if you found the issue, as i have this happening over 4 or 5 different ROM's, ruled out that its a ROM issue, trying to narrow it down to a 3rd party app, unsucessful so far.
When trying to install ANY cab i get the 'unsucessful installation' error message - including cabs i've already installed. Flash my phone this morning, install apps i wanted to, went to install something else this evening, now getting this message.
I've got Sktools installed and i am able to install cabs via this.
Got that problem too on Xperia X1, can't figure out either what the cause might be. Anyone any ideas?
Found my cause - it was installing Twikini
n1ck75 said:
Found my cause - it was installing Twikini
Click to expand...
Click to collapse
so you can't install apps after installing twikini?
I'm getting the "uninstall unsuccessfu" for almost anything i try to install and do have twikini installed (but i can't remember if it was the last app i've installed).
Also i can't open attachments in my emails, can't download files from PIE and when i go to remove programs (start-settings-system-remove programs) the list is empty...
DId you have to hard reset or did u find away around this?
btw, i'm having these issues on my kaiser.
Finally I found what my problem was, even if I can't understand, why this is a problem.
From time to time, e.g. when I got no USB cable around, I used to send the .cab vie E-Mail to have them on my device. Well, and as a matter of fact, exactly those are the ones, where installation fails.
Copying exactly the same file via USB to storage card ends in everything working fine....
So i flashed a new rom and installed twikini first, everything was ok for a couple of days. But all of a sudden this problem is back.
I know its not the .cab files because they're the same cabs i'm trying to install that i install on almost every rom after i flash them.
I'm thinking its yahoo go.
hello all
i just downloaded a cab in there : http://forum.xda-developers.com/showthread.php?t=451702
it's a cab to change the clock "TF2D digital clock by pcarvalho"
i tried to install on my mem card, and nothing happened.
so i tried on the phone and it asked me for a reboot, i push ok, then it restart.
but when it's time touchflo launch, nothing happen and it shows 'push here to start touchflow'
if i want touchflo to start i have to delete the clock...
where have i been wrong?
thanks
These CABs usually sucks. They're just not working well. My recomendation is - use the M2DC and themes in zip or mdct format instead.
It seems that you want a diamond-like clocks. If so - check this thread. (well, do it anyway )
YEAH
Ok thanks a lot,
that's great both works very find, i keep em both on my card so i can change easely!!!
thank you so much...
samjey
I am having problems installing cabs on my new HD2 with T-mobile. About 90% of the ones I try just say uninstallable after I save them. I tried to download the BsB tweak cab and same thing. I tried to download .NetCF 3.5 and it won't install either. Can anyone give me an idea, and also is there a place on my phone I can find out what .NetCF I'm running? Do the HD2's already have 3.5 on them? I've done a search on here to try and find answers but nothing yet.
Try a Soft Reset, see if that helps...if not Hard Reset
zoth said:
Try a Soft Reset, see if that helps...if not Hard Reset
Click to expand...
Click to collapse
Hold on, not just yet on the hard-reset...
amstaff, what exactly happens when you try to install CF3.5? Are you trying it from a cab or a desktop installer?
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
amstaff72 said:
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
Click to expand...
Click to collapse
Yeah you know what, I thought I had to put 3.5 on here when I first got it, but I remember now that it was never needed so I assumed it was already on here.
Whatever is causing your problem, I don't think it's CF3.5, because I never put it on and I have BsB Tweak running just fine, and I've never had installation issues like that. So yeah, I think a hard-reset might be a good place to start, to try to get whatever is interefering with your installs cleared up.
I tried a hard reset and still the same problems. Things download I just can't install most of them. I need some help.
amstaff72 said:
I tried a hard reset and still the same problems. Things download I just can't install most of them. I need some help.
Click to expand...
Click to collapse
Are you saving them to the SD card and running them from there? If so, try one running on the phone instead...just to rule out any issue with the card.
I tried that too. It still wont let me install. Is there some safety thing or something I need to disable? I remember in Vista microsoft made it impossible to delete and download some files, did they do something like that on winmo 6.5? It was like you had to have the administrator rights or something. I don't know what's going on, but customizing a windows phone is one of it"s best attributes, I can't even install any games. I need some help, please!
man...this is a chin scratcher never heard of any thing like this before. maybe it has something to do with the certificates. have you tried installing a free app from the marketplace that came on the phone. im curious if that would work.where are you getting the cabs you are trying to install. try something from freeware pocket pc.net
Yeah, the only apps that should potentially give you issues for insufficient rights when installing are homebrewed ones like those found here...but as long as you have sdkcerts installed even those shouldn't do that. But it sounds like the issue here goes beyond that because you're trying to install things that shouldn't need that anyway
NetCF 3.5
amstaff72 said:
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
Click to expand...
Click to collapse
T-Mobile HD2 (US) already has NetCF 3.5 installed.
I have tried cabs from here and from places like pocketpc.net and so many won't install. There are some that do but like I said about 90% don't. What is the sdkcerts or whatever, I don't think I have that do I need it to install some cabs? Please someone give me some Ideas. Thanks for letting me know about NetCF 3.5 I was wondering about that. But again need some ideas for the cabs. Thanks for the help and ideas so far.
I just tried to download and install the sdk certs cab. It downloaded and installed but I still can't install most cabs. I tried BsB tweaks again and it still says "BsB Tweaks uninstallable". Do I need to install the sdk certs somewhere special or can I just install it like normal?
amstaff72 said:
I just tried to download and install the sdk certs cab. It downloaded and installed but I still can't install most cabs. I tried BsB tweaks again and it still says "BsB Tweaks uninstallable". Do I need to install the sdk certs somewhere special or can I just install it like normal?
Click to expand...
Click to collapse
You just install it like normal, it sounds like it went on fine for you....so the problem has to be somewhere else, but I'm really still at a loss on this one. I don't know what other cabs/apps you're trying, but I know BsB installed on mine without a hitch.
Let me ask you this....when you're using file explorer to navigate to a cab you want to install, do you do it in landscape mode? And then, as soon as you click the cab, you filp to portrait? I just remembered that whenever I did that, it killed the install, and I would need to click the cab to run it while in portrait mode. Just a thought.
Is there a place I need to check or something that maybe makes me administrator that could be guest or something right now?
sirphunkee-when I download and install cabs I click the link, it sends me to the save screen, I most of the time save to my card and then install...but I have tried to save to the hard drive and install but it doesn't seem to matter which way I do it. When I save and install, I just leave the phone in the regular position, I don't turn it on its side. Some of the apps I've tried to install as cabs that didn't work are grooveshark for 6.5 from pocketpc.net, BsB Tweaks from here, there was a couple of others I just tried to see if they would work from 1800pocketpc and they didn't work either. Only a few are installing without any problem. Thanks for your help sirphunkee, I appreciate it.