hi i want to assing the back button "<--" on the bottom with the OK button. i dont need the back functionality, what i want is to avoid trouble hitting OK on the top every time. someone suggested me AEbutton, that solved my problem assigning the volume button for up down navigation, but i want to assing back button to act as OK.
pl. help
Well, I've got good news. The Back button IS OK. Try it in a Settings dialog, pressing Back *will* save your changes.
You can assign actions to OK with AEBPlus.
This surprised the hell out of me - I only realized this after owning my HD for a month.
It also means that there is no PPC/HD equivalent to the Back button on smartphone devices. I had a Vox before, and was used to the Back button meaning "cancel".
JUst to add a little to that.
Is it possible in any way to disable the volume keys?
I cant stop pressing them by mistake
Bengaz said:
JUst to add a little to that.
Is it possible in any way to disable the volume keys?
I cant stop pressing them by mistake
Click to expand...
Click to collapse
AE Button plus
then just remap them so they dont work as volume keys on a single press ( i use the long press to make them go up and down, but in rreality i use the slider to actually move change volume so i dont need to even map them to the volume at all)
Ehm.... what is the slider? I read about that also in TouchLockPro and I couldn't realize what it was.
Related
When you run buttons application it tells you that you can customize button 1,2 and 3.
Button 1 is the Camera- which can easily be found.
Button 2 is set to voice commander which I would like to use but cant find
Button 3 is set to record which I also cannot find.
Sorry guys, I found them, Long press volum up and down gives you 1 & 2, somehow they forgot to mention this on the manual.
I am desperate for an ultimate keymapper for the touchdual though allowing you even to assign aps to the D-PAD would be awesome. Of course I would have them on long press only as to maintain its initial directional functions.
Thanks man, I thought that was it but I didn`t press long enough.
Hi
I have wondered about this buttons menu aswell
I would like to know what the other 3 buttons are which dont seem to have numbers
currently on my device they say :
Button <Ok/Close>
Button <Input Panel>
Button <Context Menu>
What are these ??
Hey,
I have a dutch dual, but i only have 1 button (camera).
is there a way to get the other two working since holding the volume up/down does nothing (not even repeating volume change)
I had no idea you could hold down the volume buttons. Thanks for the info
Okay, I can see that I can assign long-press Send and End keys, but I want to assign a function to the Back key (short press) - can it be done?
since i come from trinity - which had the scrolling wheel - I'd like to replace the volume buttons with "almost equivalent" functionality....possible at all? don't know...
I'm not sure that Volume slider has been mappable on any of these devices. Previously I used SPB PocketPlus to map buttons, but on the HD the poplists in the setup don't work so I can't try it...
I am currently using AEBPlus to assign the buttons.I was able to map volume up, volume down and ok buttons to various functions.But unfortunately I am unable to map the HOme button.Can anyone let me know how to assign some functions for HOme button using AEBPlus please?
regards
vijay
Brilliant! AE Button Plus works perfectly, OK=Back. I love this site...
any way to get volume to be shutter release in camera mode?
truthseekers said:
any way to get volume to be shutter release in camera mode?
Click to expand...
Click to collapse
You don't need to ask the same question wherever you go and also create a thread for that!
ok
i see what you mean. I just figured it might not get read if here at the end of an older thread... hehe you mods notice everything ;-)
Can someone tell me if AEBPlus could reassign the phone on and off buttons too? I would like to use these buttons for other purposes and just use the screen to operate the phone, if possible.
eaglesteve said:
Can someone tell me if AEBPlus could reassign the phone on and off buttons too? I would like to use these buttons for other purposes and just use the screen to operate the phone, if possible.
Click to expand...
Click to collapse
Yes you can.
panosha said:
Yes you can.
Click to expand...
Click to collapse
Beauty!
Then I have no more issue with the lack of D-pad now.
panosha said:
Yes you can.
Click to expand...
Click to collapse
Could you explain how to configure to apply to on off button.
Aside from that, does someone know how to get "long" working?
It tried to give the "Back arrow" additional functions.
1,2,3 times work fine, but long does not.
Also what is the default action of "Back arrow"
I do not find it on the list? Which number
So I could configure 1 times with default action
and 2 and 3 with something else.
Home button on AE plus
Has anyone found the home button "name" in AU Button plus yet?
This thread mentioned the name for the "back"-button is "OK" in AE button plus and that does work. (except foor the long press option, that I could not get to work, but double tap works fine)
pzucchel said:
since i come from trinity - which had the scrolling wheel - I'd like to replace the volume buttons with "almost equivalent" functionality....possible at all? don't know...
Click to expand...
Click to collapse
pzucchel, I'm with you! I've realised that I actually used the scroll wheel on the Trinity much more than the D-pad, so AE buttons is a godsend!
I've got volume up/down to become arrow up/down, but how about the Trinity press-to-select on the scroll wheel? I can't get the long press on the vol buttons to work otherwise it'd be perfect...
What version of AEBPlus are you using?
I installed AEBPlus 2.6.3 to enable turning the screen while pressing the volume up button.
This version is a 14 day trail version, there is however a freeware 1.0.1 version but that one is not officialy supporting the Blackstone.
Which version are you using? I find $14 a lot for changing the behaviour of one key...
AEButton will NOT stop working after 14 days, and all the functions you really want will still be there
What is the difference between trial and registered version?
Two things only:
1. Splash screen appears during device starting up.
2. "Action list" is blocked in trial mode
Click to expand...
Click to collapse
http://ae.inc.ru/aebplusfaq.php
Good to know! Didn't see that when reading the website...
Anyway - is there an easy trick to assign the "volume up" pressed for >1 sec to rotating the screen to landscape (270 deg) and portrait?
/me is thinking of a registry tweak...
I just got a Touch HD and installed AE Button Plus and it works great for assigning different tasks for the button below the screen.
However I have not been able to find a which button in AE Button (if any) that corresponds to the Home button. Has anyone else here been able to assign any tasks to double-clicking the Home button?
tomasn said:
I just got a Touch HD and installed AE Button Plus and it works great for assigning different tasks for the button below the screen.
However I have not been able to find a which button in AE Button (if any) that corresponds to the Home button. Has anyone else here been able to assign any tasks to double-clicking the Home button?
Click to expand...
Click to collapse
There is an alternative: MobileMagic
http://forum.xda-developers.com/showthread.php?t=449654
Yerry said:
There is an alternative: MobileMagic
http://forum.xda-developers.com/showthread.php?t=449654
Click to expand...
Click to collapse
OK, I can see that you want to push your own solution but as far as I can see it does not support the Home button either. Also it supports a lot fewer actions than AE Button Plus does.
In AE Button Plus I only could assign the two phone buttons. What about the "Home Button", "Back Button", "Calendar" and "Contacts"?
The back button can be assigned. Assign things to the "OK-button" i AE Button Plus to assign it to the back button.
Great! Thank you very much.
Hi, here is a reply on AEB Plus compatibility with the HD direct from the developer:
---------------------------
Hello David,
Thanks, it is always nice to know if you find this utility interesting
As for your question: yes, BPlus is compatible with HD as well as any other PocketPC 2k3 / PocketPC 2k3SE / WM5/WM6/WM6.1 devices.
The problem I know on Touch HD:
- Home key may not be remapped due to driver implementation
- Long keypresses are not detected in BPlus for green/red keys and “back” button (button driver limitation).
- “Back” button corresponds to the “Ok” in button list so you will not need to add it via File->Add key but just re-define “Ok” button instead
- Backlight controlling will work in next BPlus release (should appear this week)
Anyway – just try and install BPlus to check if it will suit your needs before buying. It have very few “demo” mode limitations...
Regards,
Alexander
----------------------------
all keys except home key works great on mine
By "all keys" you mean:
- left phone key
- back key
- right phone key?
mirandolo said:
By "all keys" you mean:
- left phone key
- back key
- right phone key?
Click to expand...
Click to collapse
Don't forget the Volume Buttons (long-press DOES work for those two)
Hi guys,
I played around with AE Buttons for a couple of hous last night and here's my experience:
- Volume up/down - Work like a charm.
- Home buttom - Can't be mapped.
- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?
- Green/Red phone - work fine in single, double and triple press
- Green phone long press is mapped by the driver to a virtual button called "Button 1(Hold)" (It's just at the top of the AE Buttons list) and by default launches the voice dial program (this is defined in the Settings/Personal/Buttons/Program Buttons)
- Red phone long press - This is a tough one. This button can't be captured unless you set "Lock device" in Settings/Personal/Buttons/End key. In this case it generates a key code and you can record it as a new key in AE Buttons. There's a catch though. When you map an action to single press, Lock program is no longer executed. Your selected action is executed, but immediately after that the device goes to the today screen as if you have pressed the Home button.
- Power button - Can't be mapped at all. I wish this was possible. I wanted to make long pressing the power button to soft reset the device directly.
Hope this info is useful. It took me a couple of hours and A LOT of soft resets to try all the possible combinations
triffonovm said
[- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?]
Confirmed.
John R
triffonovm said:
Hi guys,
I played around with AE Buttons for a couple of hous last night and here's my experience:
- Volume up/down - Work like a charm.
- Home buttom - Can't be mapped.
- Back key - Didn't realize it was mapped to the Ok button. I tried it out tonight. Works fine, but I'm not sure what action should I put in the single press configuration to preserve it's normal function. "Ok/Close" a suppose. Can someone confirm, please ?
- Green/Red phone - work fine in single, double and triple press
- Green phone long press is mapped by the driver to a virtual button called "Button 1(Hold)" (It's just at the top of the AE Buttons list) and by default launches the voice dial program (this is defined in the Settings/Personal/Buttons/Program Buttons)
- Red phone long press - This is a tough one. This button can't be captured unless you set "Lock device" in Settings/Personal/Buttons/End key. In this case it generates a key code and you can record it as a new key in AE Buttons. There's a catch though. When you map an action to single press, Lock program is no longer executed. Your selected action is executed, but immediately after that the device goes to the today screen as if you have pressed the Home button.
- Power button - Can't be mapped at all. I wish this was possible. I wanted to make long pressing the power button to soft reset the device directly.
Hope this info is useful. It took me a couple of hours and A LOT of soft resets to try all the possible combinations
Click to expand...
Click to collapse
I encountered the below problem.
After receiving or making a phone call, the button did not work for around 5 minutes. Instead of move the arrow up or down, it turn the volume up/down. After that the button work again as what I had configured.
Anyone having the same problem?
Regarding the back key. I have this not mapped for one touch, i.e., normal OK operation, and for double press I have it rotate the screen.
I don't like gsen and the gyrator - great apps but I just don't need them always there.
dannyng said:
I encountered the below problem.
After receiving or making a phone call, the button did not work for around 5 minutes. Instead of move the arrow up or down, it turn the volume up/down. After that the button work again as what I had configured.
Anyone having the same problem?
Click to expand...
Click to collapse
I have this problem too! Any solution to share?
That's weird - I have just tested and all the AEB Plus assignments worked before a call.
After a call the volume assignments I have (1 press = arrow up/down, 2 press = volume up/down, long press up = flash lamp, long press down = resco audio) don't work. All the volume presses just revert to the volume operation.
I also have the back/OK key assigned to screen rotate for double press. This works fine after the call.
So, status now is not working right - I'll wait and see if it fixes itself (!!) with a few minutes.
Cheesy Dave said:
That's weird - I have just tested and all the AEB Plus assignments worked before a call.
After a call the volume assignments I have (1 press = arrow up/down, 2 press = volume up/down, long press up = flash lamp, long press down = resco audio) don't work. All the volume presses just revert to the volume operation.
I also have the back/OK key assigned to screen rotate for double press. This works fine after the call.
So, status now is not working right - I'll wait and see if it fixes itself (!!) with a few minutes.
Click to expand...
Click to collapse
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Thanks for the fix!
I shall try it tonite!
Cheesy Dave said:
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Click to expand...
Click to collapse
I just tried it and it doesn't work. I guess it's a bug and need to be fixed by the developer. Hmmmm, just suprised that no one really notice this bug.
Same bug on volume up. I assigned 1P for standard function and 2P for WiFi toggle. Well after the first or second use, it looses mapping. To have it to work again a soft reset is needed...
Cheesy Dave said:
I found the fix. In AEB + there is a set of options. One of these is the "restore volume slider" - by default this restores volume control to the phone app. It appears not to reset it back after.
I have just turned all these "restore volume slider" options off and now AEB Plus works as it should (or as I expect).
Click to expand...
Click to collapse
Thanks a lot mate! Works purrfect! had the same problem going on.
Insane Devil said:
Thanks a lot mate! Works purrfect! had the same problem going on.
Click to expand...
Click to collapse
I'm glad this is working for some.
But, I got an email from the developer (who is very quick to respond to emails) that said he is aware of a fault with the phone interaction and has not been able to replicate it.
Removing the volume slider option for the phone might work (as it did for me) but it seems that the intermittent fault probably will remain.
Cheesy Dave said:
I'm glad this is working for some.
But, I got an email from the developer (who is very quick to respond to emails) that said he is aware of a fault with the phone interaction and has not been able to replicate it.
Removing the volume slider option for the phone might work (as it did for me) but it seems that the intermittent fault probably will remain.
Click to expand...
Click to collapse
Glad that it work for you (so envy, hehehehe) and thanks for the email to the developer.
Wondering why some HTC HD working (removing the volume slider option) and some not (like my case )
Hiya ppl
I was wondering if anybody has made a program that makes it possible to disable the volume buttons as i often mis-touch em (And it feels like even a very slightly touch makes em react)...
//M
m.klinge said:
Hiya ppl
I was wondering if anybody has made a program that makes it possible to disable the volume buttons as i often mis-touch em (And it feels like even a very slightly touch makes em react)...
//M
Click to expand...
Click to collapse
Try AE Buttons Plus. You can unbind the volume buttons, and it's free.
sk806 said:
Try AE Buttons Plus. You can unbind the volume buttons, and it's free.
Click to expand...
Click to collapse
Yea ive read about em - however I would love it to be able to disable/enable em "on the fly" easy and im unsure if Ae can do that, but thx anyway
//M
m.klinge said:
Yea ive read about em - however I would love it to be able to disable/enable em "on the fly" easy and im unsure if Ae can do that, but thx anyway
//M
Click to expand...
Click to collapse
Count me in. I'd really like to have this as well.
sk806 said:
Try AE Buttons Plus. You can unbind the volume buttons, and it's free.
Click to expand...
Click to collapse
It doesn't work for me. I have version 2.6.6 and i set the volume buttons to "Unbind only" but nothing happens, buttons still work. What am i missing?
copy the attached dll to your HD's windows directory, overwriting the original one - you have to use resco explorer or total commander to accomplish that. Then map a key in AE buttons for locking the device - voila, your done.
S2U2 will disable the vol rocker while the phone is on standby/locked, so they will only work when you're using the phone.....which would make it unlikely that you'd hit them accidentally
hope it helps
I looked for similar topic but didn't find it,I was wondering if anyone knows how to turn off that iritating sound when pressing volume buttons ?
I installed volume keys and the sound wasn't there anymore but after that I couldn't use scilorsleo camera anykey which makes it possible to take a photo with volume buttons
anyone has a solution?
I use AE Button to disable the volume buttons for a single press. But then also set AE button to alter the volume up/down when held for a long press. So if I do want to change volume I just do a long press on either button
Mick
Gasman said:
I use AE Button to disable the volume buttons for a single press. But then also set AE button to alter the volume up/down when held for a long press. So if I do want to change volume I just do a long press on either button
Mick
Click to expand...
Click to collapse
Excuse me I am relatively new here. What do you refer to as the "AE" button? I keep my Touch in a holster and when I attempt to draw it out to answer I keep hitting the Vol rocker changing the volume settings - very annoying. From what you say this may help as it would be a single press, although probably a long press. I wouldn't mind disabling the vol rocker buttons as I just as easily use the volume settings to change vol anyway - but I hate altering (hacking) the normal operating system to do it.
i have similar things i have disable volume buttons.
how to fix it?
Hi All
I've just got a S5 today. Overall I like it a lot however the bloody button res-assignments is soooooooo annoying!
Is there any to re-map the button layout back to the older galaxy versions? I.E.
Press the left button and the menu will activate (I know if I hold it down it will work but I keep forgetting and it brings up the tasker)
Hold the home button to bring up the tasker.
Frustrating yours
Paul
jokerni said:
Hi All
I've just got a S5 today. Overall I like it a lot however the bloody button res-assignments is soooooooo annoying!
Is there any to re-map the button layout back to the older galaxy versions? I.E.
Press the left button and the menu will activate (I know if I hold it down it will work but I keep forgetting and it brings up the tasker)
Hold the home button to bring up the tasker.
Frustrating yours
Paul
Click to expand...
Click to collapse
Root it -> Install Xposed -> Install GravityBox
Thanks, I had thought about it but its a new fone and you know what Samsung are like... I'm leaving towards re-mapping the key.
/system/usr/keylayout/Generic.kl
Anyone know the key number for the left button (Is it 138), what would I need to change to make the default option a menu. I suppose thinking out loud I want to swap the commands over. I.e. I press the key once I get the menu, press and hold I get the tasker.
Thanks
P.
Just long press the left button and the options come up
Sent from my SM-G900F using XDA Premium 4 mobile app
jokerni said:
Thanks, I had thought about it but its a new fone and you know what Samsung are like... I'm leaving towards re-mapping the key.
/system/usr/keylayout/Generic.kl
Anyone know the key number for the left button (Is it 138), what would I need to change to make the default option a menu. I suppose thinking out loud I want to swap the commands over. I.e. I press the key once I get the menu, press and hold I get the tasker.
Thanks
P.
Click to expand...
Click to collapse
Your best bet is to use gravity box, as suggested above. You can only change the recents function to menu via the file you mentioned. I believe the rest of the options you want are smali edits.