hi i havedone the uspl cid unlock thing but not sure if its worked
could someone please confirm if it has worked please
my ipl is 3.04.0001
my spl is 3.04.0000
thanks in advance
Didn't worked...
Try again.
Your SPL must be 1.11.0000
Related
What am i doing wrong? I have a cingular 8125, I installed lockwiz 2 and followed the instructions. It installs on my phone fine but everytime i run Lockwiz .bat i type in "U" hit enter and the screen dissapears and it does nothing. I downgraded my ROM. It reads:
IPL 1.08
SPL 2.25
CSN 01.09.11
OS 1.8.11.1
Please any help would be greatly appreciated!
You're IPL/SPL should BOTH be 1.xx before you can succesfully unlock. Follow:
http://forum.xda-developers.com/showthread.php?t=298613
I follow instructions on updating and unlocking G3 wizard using button 1.05 I downgraded rom, I did Lokiwiz when the phone rebooted I got Ipl 1.XX Spl 2.xx, I reran a second time and got the same Ipl and Spl, What am I doing wrong.
I don't think you are doing anything wrong, run it one more time and see if everything is okay after that.
These little monsters are tricky buggers, some people are good after one try - others two - you just may be one who needs to run it three times.
Good luck
dobbiedoo said:
I follow instructions on updating and unlocking G3 wizard using button 1.05 I downgraded rom, I did Lokiwiz when the phone rebooted I got Ipl 1.XX Spl 2.xx, I reran a second time and got the same Ipl and Spl, What am I doing wrong.
Click to expand...
Click to collapse
dobbiedoo said:
I follow instructions on updating and unlocking G3 wizard using button 1.05 I downgraded rom, I did Lokiwiz when the phone rebooted I got Ipl 1.XX Spl 2.xx, I reran a second time and got the same Ipl and Spl, What am I doing wrong.
Click to expand...
Click to collapse
Nothing to worry,sometimes Button's Rom 1.05 takes more then once to get both IPL/SPL same,keep on flashing the button's 1.05 for a couple of more times,till both ipl/spl get the same 1.xx,or you can try xda_minis_launch rom,it also helps in some cases,only after you have both ipl/spl 1.xx,then use lokiwiz tool to SIM/CID unlock the phone.
Cheers!
i have completed hard spl, my ipl/spl is 2.2.0001 and 2.21 olip
please help
Download 'Mun RUU' from the HardSPL thread and replace this RomUpdateUtility with the RUU in the Rom you are trying to flash,it'll work.
I've got the same problem, where can i find 'Mun RUU'?
Solved...
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
rwik5060 said:
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
Click to expand...
Click to collapse
Lots of threads on exactly this, check the polaris wiki
http://forum.xda-developers.com/showthread.php?t=425922&highlight=mtty
Also don't miss the part where he says try to flash the original ROM first, or try SD method too
Rwik,
Flash the original / shipped rom back.
Hardspl
reinstall custom rom.
big thanks at all, that works with mtty
thanks thanks thanks!!!!!!!!!!!
i have a dopod M700 Love which can only get into the bootloader right now after flashing back to the shipped rom. the ipl shows 1.28.0001 and spl is 1.28.0000 any solutions for this?
tried the sd card method and all other roms but not helping... trying to find spl 1.11.0000 please help... thanks in advance.
Try this i uploaded this to my phone and its 1.11.0000
http://forum.xda-developers.com/showthread.php?t=374430
it stops at 79% telling that the file is corrupted any other methods? thanks...
is there any way you can get into windows with ur phone. or can you only get into bootloader.
only managed to get into bootloader