Hermes with Sony HBH-DS200, can't change BT volume - 8525, TyTN, MDA Vario II, JasJam General

Guys,
I've bought a Sony HBH-DS200 as a new headset for my Hermes. First impression: great! The headset sounds good, and AD2P works fine after installing the AD2Pfix for the Hermes.
But here is the problem:
The headset hasn't got a volume switch for phone calls, the volume had to be controlled from the Hermes. But when I try to change the volume with the volume bar on my Hermes, the volume on the headset won't change. And that's very anoying because the volume is too loud (and a little bit crapy).
When I'm listening music (AD2P) I can change the volume.
When I pair the headset with my Nokia I can control the volume and the sound for phonecalls is much brighter then on the Hermes.
Because I'm using CRC's ROM, I just reflashed my device to the orginal HTC ROM but the issue also persist with this rom.
Any ideas?
Note: I have also a Parrot CK3100 for my Hermes, I just checked: the same issue! But I never noticed it because the Parrot has a volume control.

Hi, i've the some problem with my plantronics free hands...
i can't control in-call sound with my bluetooth...
any idea?

I have tried the following (without any succes):
- adjusting the registry setting "spk volume" see this topic. I can make this setting but after resetting the device the dword is removed (and the volume isn't changed)
- Installed the Widcomm stack, after installing the ad2p signal is far too loud and the phonecalls aren't redirected to the headset
No solution yet, I will continue

im ot sure if this will help .... but i have the same HBH-DS200 a2dp headphones i had a slight annoyance with the sound being to low, on the head set hold the play button in when the set is turned on - turns the volume up on the headset! - hope this worked

I have the Plantronics 590's and can control the volume during a call from the headset. I am using CRC's 13.0 rom. I do not have the hermes A2DP fix on my phone and never have.

Related

Bluetooth audio volume problem

I ther any reg tweak to make the audio routed to my b/t handsfree any louder phone volume is at max and bt volume is at max.
if i connect to my nokia i have to turn down bt volume as its too loud.
so i'm thinking this is down to my wizard
garymeg said:
I ther any reg tweak to make the audio routed to my b/t handsfree any louder phone volume is at max and bt volume is at max.
if i connect to my nokia i have to turn down bt volume as its too loud.
so i'm thinking this is down to my wizard
Click to expand...
Click to collapse
I have similar issue where my bluetooth turn to max volume but still appear to be weak. I think the reg key must be some where...

Too loud for BT headset

Dear All, does anyone know how to adjust BT headset volume on wm2003 with XDA II? I am using OEM version of wm2003 and my BT headset does not allow me to adjust the volume, it seems very loud and my ear can't handle it at all, thanks.

TyTN II and the Jabra 320s Stereo BT Headset

Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?

Bluetooth handfree speaker volume

I have a car tat is installed with Bluetooth handfree system. But when i call/have incoming calls, the speaker volume is just too soft(damn my noisy car)... I've max out my volume bar(left side volume control) but no luck.
I guess the problem lies to the phone itself. Anybody can recomand me a solution? like a volume booster or somethign? I'm using O2 XphoneIIm (HTC Amadeus) with ALEUT's WM6.1 pre [1.3] installed.

Vogue and Jabra Bluetooth Headset BT-8010 Strange goings on!

Hello Everyone,
I've got a USCC Vogue, which is running a wm 6.1 rom I cooked using PPCKitchen's Rom Kitchen. The strange thing is, I paired my Jabra BT8010 headset to the vogue, and it works great, until I turn it off. To get it to work properly again, I have to delete the device and repair, OR I have to put the headset in Stereo A2DP? mode, then press the play/pause button, after which I can switch back to phone mode with the headset with very few issues (ie, only the known MSVC1.6 problems.) I've tried using acbToggle to switch the audio gateway over to bluetooth, but the volume is low. I've also tried plugging in my headphones and then toggling, and that helps the low volume issue some, but not as much as re-pairing or doing the a2dp trick. Also, shouldn't the vogue automatically connect to my headset upon turning the headset on? Because I have yet for it to do so. Also, if I go into the Connections/Bluetooth menu item, I see the headset, and if I bring the menu up for the headset and select either Set as Headset or Set as Wireless Stereo, nothing happens. Is there some other way to set my headset to automatically connect as Wireless Stereo? (this setup gives me the best performance and volume)
Thanks in advance for any help/information anyone can give me.
Jamie
hudson_macbeth said:
Hello Everyone,
I've got a USCC Vogue, which is running a wm 6.1 rom I cooked using PPCKitchen's Rom Kitchen. The strange thing is, I paired my Jabra BT8010 headset to the vogue, and it works great, until I turn it off. To get it to work properly again, I have to delete the device and repair, OR I have to put the headset in Stereo A2DP? mode, then press the play/pause button, after which I can switch back to phone mode with the headset with very few issues (ie, only the known MSVC1.6 problems.) I've tried using acbToggle to switch the audio gateway over to bluetooth, but the volume is low. I've also tried plugging in my headphones and then toggling, and that helps the low volume issue some, but not as much as re-pairing or doing the a2dp trick. Also, shouldn't the vogue automatically connect to my headset upon turning the headset on? Because I have yet for it to do so. Also, if I go into the Connections/Bluetooth menu item, I see the headset, and if I bring the menu up for the headset and select either Set as Headset or Set as Wireless Stereo, nothing happens. Is there some other way to set my headset to automatically connect as Wireless Stereo? (this setup gives me the best performance and volume)
Thanks in advance for any help/information anyone can give me.
Jamie
Click to expand...
Click to collapse
The real questions is did it work before you flashed your custom creation? Is it possible that there is an issue with your ROM?

Categories

Resources