Saving a picture of the TV screen takes an eternity!? - XPERIA X1 General

Hey guys,
today i took a picture of my LCD-TV screen to show a scene out of a PS3 game to a friend. It took about 2 Minutes to save this picture and even then only half of it was saved? The upper half was normal but the lower half was grey. When i take a "normal" picture saving only takes 1 second...
I made pictures of the TV screen before with my old W960i and there has never been a problem.
Any ideas or could someone try this with his X1 and get back to me?

soft reset, try aggain?

Doesn´t change anything...

then u should try a hard reset. eitehr your software is totaly borked or u might have an issue with your hardware.
honestly ... it sounds more like a hardware issue but try the hard reset first. dont forget to abckup your data

But why does it work with "normal" pictures then? Have you tried it with your phone?

The image will be a too large file due to the lines in your TV. Try dropping the pixels count to 1 or 2mb.

Yes I already thought of that. It works perfectly when I am not too close to the screen. When I´m too close a lot of coloured stripes appear when the auto focus is working and you can see the pixels of the TV.
Even so, my W960i never had a problem with that. I will try dropping the pixels count when I´m at home.
But still...would be interessting if someone of you could try it!

Lex85 said:
But why does it work with "normal" pictures then? Have you tried it with your phone?
Click to expand...
Click to collapse
good question!
try deactivating the "verify picture" inside the camera settings.
the Picture should be allready taken after the shutter sound and should just be written to the memory. so its maybe the "verify" function which borks it up and tries to repair it!?
up/downscaling teh qulity (fine, normal economy) could also help if its a problem with teh JPG compressor!?
just made screens of my LCD Monitor. no problems, even autofocus worx great and a distance of 5 cm
did screens of my Plasma at home a few days ago and here was also no problem.

Ok, I will try it! Thanks guys for your help!

Isnt the job of "verify picture" not just to show you the picture you just have taken?

actualy no idea
i just know that some digicam Firmwares have exactly this feature build in. Check if the taken image isnt corrupted and/or fix some colors
just checked it ... it realy only shows u the picture X-D

hey i just tried it (takin a pic of my laptop screen close up with marco mode on) and the pic took about a minute to save and when i checked it, only the top of the screen was saved and the rest of the image was greyed out....and i'm on the touch-it experience v3 rom

So, just disabled the "verify picture" option and it works perfect!

Lex85 said:
So, just disabled the "verify picture" option and it works perfect!
Click to expand...
Click to collapse
You mean automatic preview of the pic after taking the a shot??

can u please tell me where can i find that option?

where is this verify picture option?

Turn on the camera and press the "wrench" button down right, then press the "arrow down" button down right. Now you have a menu on the left side, select the "Picture&Video" button up left. It´s the third entry in the list.
It is not the same as the "automatic preview" mode!

Related

Problem with the camera!

Hello guys/girls, i have a strange problem; when i take a picture shot the picture displays as a green screen in landscape/portrait, but clear when it is an icon in the album?? any solution?
To stay with the theme (in case you need to reload the software for the camera), I have ben getting an error "Unable to initialize camera, Failed to set up the camera device". This started once the unit was submerged in water (don't ask, mother nature was just mean to my TP, and the high grade carpet in my basement).
Ameer97 has priority to this thread with his question...but I don't mind riding his coat-tails.
Thanks all!!!
ameer97 said:
Hello guys/girls, i have a strange problem; when i take a picture shot the picture displays as a green screen in landscape/portrait, but clear when it is an icon in the album?? any solution?
Click to expand...
Click to collapse
Like this maybe? http://forum.xda-developers.com/showpost.php?p=2681596&postcount=17
If so, disable "encode photos as portrait" with advanced config.
Yes it was just like that picture. now problem solved, thanks a lot Mastermnd

X1 Camera

I had a diamond before I got my Xperia, besides the little problems like the bluetooth turning off (fixed with good ol' mortscript) and stuff its awesome.All though the camera is realy bad, it gives a realy nice picture but the exposure time is way too long even with sport mode on. you've got to hold the thing perfectly straight for a second or two other wise its blur-city.
Is this just my X1 or are others having the same problem?
Can't say I use the camera much just would be nice to find some sort of reg key or something to make it a bit more functional.
Yes, the camera is virtually unusable as-is, because you have to keep it steady for ages.
And the problem is that if you give the phone to someone else to help you take a group picture, the long shutter time (which no one normally expects) means I have to go and explain to people to keep pressing for 2-3 seconds and not move at all.
It is stupid.
Yup, its a shame SE realy need to send out a few fixes for this phone, after all it is their flagship product at the moment, the O2 stores near me cant even get hold of them.
Bluetooth and Camera definatly need fixing
Unfortunately, since SE has decided not to use HTC to build their phones again, the Xperia X1's firmware is unlikely to be fixed ever again... sigh.
Eh, it doesn't matter if SE cooperates with HTC or not, they have their own WM department and a new firmware is already out according to this (czech) site:
Code:
http://semania.mobilmania.cz/content/view/3163/2/
One quick solution is going for infinity focus instead of auto-focus. Seems like the majority of the time is taken up by the focusing function.
the tw rom is newer in the rom thread.
as to the focus i tend to press it and leave it.
I'm trying to say that if you have focus set to auto (in the camera settings) it takes much longer to take a photo than when you have it set to infinity.
fards said:
the tw rom is newer in the rom thread.
as to the focus i tend to press it and leave it.
Click to expand...
Click to collapse
Not so easy to do this if you are at a party and want to take a group photo...
Maybe infinity focus is the answer...
btw do we know what the latest firmware is?
open the phone and press the enter button once, or press the ok/center dpad once to start the process of the picture being taken.
also use multi shot this allows you to take pictures after another and then later delete ones that you do not want.
the US x1 has a newer camera cab but it doesnt help the time it takes to take a pic
i use sport mode with focus set to infinity as default settings. this gives great results and no need to hold still that much as some were suggesing.
overall the camera is great and its clearly better than the T*Omnia 5MP camera.
lets hope the new camera application from the Asian rom improve things. is it avalable CABed someware?
Sport and infinate
Although the focus isnt as good as Macro or Auto it is an improvment for the capture speed.
Setting to Sport and Infinate works a hell of a lot better than what I was using. (Sport and Auto).
Cheers guys.
shadowmike said:
open the phone and press the enter button once, or press the ok/center dpad once to start the process of the picture being taken.
also use multi shot this allows you to take pictures after another and then later delete ones that you do not want.
Click to expand...
Click to collapse
I thought this for ages, its not true it really just means it has a slower shutter speed (multi-frame shot) which is why most of your pictures that involve movement will come out blurry.
Also, here is a hint for taking pictures faster: The button has 2 pressure points, hold the button down to the first point to focus, do NOT let go--then push it down all the way to take the picture it should do it instantly
For me Sports + Infinite = instant picture.
shadowmike said:
open the phone and press the enter button once, or press the ok/center dpad once to start the process of the picture being taken.
also use multi shot this allows you to take pictures after another and then later delete ones that you do not want.
the US x1 has a newer camera cab but it doesnt help the time it takes to take a pic
Click to expand...
Click to collapse
thanks a lot, I didn't know the entre button and do the work
Poetique said:
For me Sports + Infinite = instant picture.
Click to expand...
Click to collapse
infinite=no autofocus
When I change the standardfocus setting in the camera settings it won't save it. When I start the camera later it doesnt give me the right settings i choosed in camer settings. What am I doing wrong here? For example I wan't sport mode with macro, but I get sport mode with autofocus everytime I start the camera..
Fille84 said:
When I change the standardfocus setting in the camera settings it won't save it. When I start the camera later it doesnt give me the right settings i choosed in camer settings. What am I doing wrong here? For example I wan't sport mode with macro, but I get sport mode with autofocus everytime I start the camera..
Click to expand...
Click to collapse
You have to press the down arrow on the bottom right side of the screen when in settings this will bring a more detailed settings page and you can set the default settings in there and your camera will use them everytime
Good luck
I'm a Touch Pro user but we don't have the ability to do infinite zoom. It's probably a registry value we're missing. Would anyone mind sharing any registry strings that seem to discuss focus or zooming? It would likely be in HKLM/Software/HTC/Camera
Thanks
Fille84 said:
When I change the standardfocus setting in the camera settings it won't save it. When I start the camera later it doesnt give me the right settings i choosed in camer settings. What am I doing wrong here? For example I wan't sport mode with macro, but I get sport mode with autofocus everytime I start the camera..
Click to expand...
Click to collapse
Same problem here. The default focus setting is infinite, but the camera is on auto everytime.

Autofocus doesnt work on Camera

hihi
me and my girtlfriend got the HD2 since one week. I installed alle patches and BSB Tweak on the Phones. Everything is ok on my phone. But the Camera of my girlfriend does not sharpen pictures over 10 cm and longer away from the Object. I dont know, if the camera works good before. She only tried after i patched and optimized the Phone. A Hardreset dont chance the probleme. Same problem as before.
I dont know if it is a hardware failure, or any problem in the Settings.
Hardreset with 1.43 German doensnt work. Should i send it to repair the phone back to the company i get it, or do u think it is possible to repair the Focus, who sharpened the pictures via newer ROM, who maybe released the next few days or weeks?
what do u think.
thx and sry for the bad english
Ripperjack75 said:
hihi
me and my girtlfriend got the HD2 since one week. I installed alle patches and BSB Tweak on the Phones. Everything is ok on my phone. But the Camera of my girlfriend does not sharpen pictures over 10 cm and longer away from the Object. I dont know, if the camera works good before. She only tried after i patched and optimized the Phone. A Hardreset dont chance the probleme. Same problem as before.
I dont know if it is a hardware failure, or any problem in the Settings.
Hardreset with 1.43 German doensnt work. Should i send it to repair the phone back to the company i get it, or do u think it is possible to repair the Focus, who sharpened the pictures via newer ROM, who maybe released the next few days or weeks?
what do u think.
thx and sry for the bad english
Click to expand...
Click to collapse
Your english is fine mate
If you hadn't tried a hard reset then I'd suggest checking that auto focus was actually enabled, as you can disable it from the camera settings (open the camera, open the options screen, press the setup icon & then go to advanced).
Since a hard reset hasn't changed it, I'd have to say it's a hardware fault. It's good that you've got another one there to compare it to so you know it should work properly. Just a shame that this one sounds faulty.
Hope you get it sorted quick. Good luck
Have you read and done what it says in the manual, page 240 in the English edition?
WB
johncmolyneux said:
Your english is fine mate
If you hadn't tried a hard reset then I'd suggest checking that auto focus was actually enabled, as you can disable it from the camera settings (open the camera, open the options screen, press the setup icon & then go to advanced).
Since a hard reset hasn't changed it, I'd have to say it's a hardware fault. It's good that you've got another one there to compare it to so you know it should work properly. Just a shame that this one sounds faulty.
Hope you get it sorted quick. Good luck
Click to expand...
Click to collapse
the one and only option ist "Touch Focus" i see on advanced options.
Do u mean, a rom updated doenstn work, when 1.61 is official or a higher rom?
on my phone, i hear a voice on the lensse when it sharpened the picture, on my girlfriends phone there is no voice on the lense, only the white quad moves, but there is no noise from the lense.
mayebe it is possible to destroy the Focus, when i update the camera patch and do optimices with BSB Tweaks?
wacky.banana said:
Have you read and done what it says in the manual, page 240 in the English edition?
WB
Click to expand...
Click to collapse
i have only the german one. But i try to read it, when i am at home. the htc page is not available here at work ;(
can u copy and paste it maybe in this thread?
thx
Ripperjack,
See this...
" ... • Press and hold the Virtual Camera button to set the focus and
take a photo.
• Press and hold the Virtual Camera button to set the focus and
start capturing a video. Press the button again to stop capturing.
To take a photo using Touch Focus
Touch Focus allows you to focus on a particular area of the screen by
touching it. Touch Focus is enabled by default and is available in the
Photo and Contacts Picture capture modes.
1. Set the capture mode to Photo or Contacts Picture mode.
2. Tap the area on the screen where you want to focus. The focus
indicator positions itself on the selected area.
Note If you tap outside the effective focus area, a white box appears to
indicate the area where you can use Touch Focus.
3. Press and hold the Virtual Camera button to set the focus and
take a photo. You can also directly press and hold the area you
selected (that is, the area enclosed within the focus indicator) to
focus on that area and take a photo.
To capture photos in Panorama mode
Press and hold the Virtual Camera button to set the focus and capture
the first photo. Press and hold the button again to focus and capture
each subsequent photo and complete the panorama....."
WB
Full manual available here...http://www.htc.com/uk/userguide.aspx?p_id=297
PS: I just checked on my device. If yo go into the camera app>settings>advanced, make sure Touch Focus on the first page is set to ON.
ok, thx. Try this all. But have no effect. Onlyo the Quad moves, but not sharpening the Picture.
A new ROM maybe cannot repair this?
Hi Ripperjack,
If I were you I would move to the official ROM 1.48. Then BEFORE loading any fixes or software on (1.48 has most of them in it anyway) I would test the camera and see if it works according to the handbook.
If it does not then you might want to consider sending the device back as faulty and getting a replacement.
Cheers
WB
have the original 1.48 ROM from HTC on my HD2. It was on my phone already, when i get it. Girlfriends phone also have 1.48. I wanna try to flash the 1.61 Custom on my phone, but when i do this, i loose my warranty?
otherwise, is there any Registry entry to activate/deactivate the Focus on Camera?
push maybe someone know it?

Blurry Photos

I've been using the camera a lot lately and have always had a problem with the picture quality, mainly indoor pics. I would hold the phone steady, press the shutter button down halfway, wait for it to focus, then take a picture, but it would still end up a little blurry. Anyone getting problems like this? If not, what settings are you using?
Also, my biggest gripe is the fact that camera settings can't be saved. I would set it up so a friend could take a picture of me, but they somehow always press that search button, which then erases all my camera settings when they go back to the camera app. Did anyone find a hack or some sort of method to keep the settings permanent?
The main reason I have to bring all this up was biggest after taking blurry pictures last night, my friend's just bust out their iphones and with one simple click, they took an almost instantaneous photo with no settings to mess with and no blur at all.
I would also like to add that one of my friends was trying to take photos with his lg quantum as well, and he has the same problem. Is this a problem with windows phone 7 in general?
you could check out shcamera. It's a sideloaded app that was developed for the hd2 crowd, so it doesn't use the camera button, it's all screen rouc, and it doesn't have all the various settings/adjustments, but it saves settings and works pretty good. Tap screen to focus, press onscreen shutter button to take picture.
Sent from my SGH-i917 using XDA Windows Phone 7 App
Turn on antishake in settings used to hav the same problem fixed via antishake thing bt the worse part is u hav to change it everytime u r abt to click pictures bcoz u cant save camera settings ...
DKDogz54 said:
I've been using the camera a lot lately and have always had a problem with the picture quality, mainly indoor pics. I would hold the phone steady, press the shutter button down halfway, wait for it to focus, then take a picture, but it would still end up a little blurry. Anyone getting problems like this? If not, what settings are you using?
Also, my biggest gripe is the fact that camera settings can't be saved. I would set it up so a friend could take a picture of me, but they somehow always press that search button, which then erases all my camera settings when they go back to the camera app. Did anyone find a hack or some sort of method to keep the settings permanent?
The main reason I have to bring all this up was biggest after taking blurry pictures last night, my friend's just bust out their iphones and with one simple click, they took an almost instantaneous photo with no settings to mess with and no blur at all.
Click to expand...
Click to collapse
Same here. I owned an HD7 that didn't have this blurry issue. It seems the Focus camera is super sensitive to movement.
Thanks, at least I know i'm not the only one with this problem. I try to turn on anti shake everytime i use the app, which actually helps a lot. The problem is when I give the phone to someone so they can take the picture. They somehow accidently press the search button and I have to play with the settings again. Kind of a bummer, but I'll try to get used to it.
DKDogz54 said:
Thanks, at least I know i'm not the only one with this problem. I try to turn on anti shake everytime i use the app, which actually helps a lot. The problem is when I give the phone to someone so they can take the picture. They somehow accidently press the search button and I have to play with the settings again. Kind of a bummer, but I'll try to get used to it.
Click to expand...
Click to collapse
You might consider having them take more than one picture. I've noticed that when I take another picture after the blurry one, the results tend to be more normal. Maybe have them take a preliminary picture and then a real one. This seems preferable to messing with settings all the time.
Nice. The new NoDo update made the anti-shake option on by default. That will help a lot!
DKDogz54 said:
Nice. The new NoDo update made the anti-shake option on by default. That will help a lot!
Click to expand...
Click to collapse
the nodo update didnt default the anti shake on by default on my focus .
The official nodo update for att focus includes a Samsung update that defaults the antishake on, helps lessen accidental capacitive button presses, includes an att hotspot sniffer/whisper that auto logins, and has a provision for transferring att phonebook contacts onto the phone
Sent from my SGH-i917 using XDA Windows Phone 7 App
Focus
Anti-shake is on by default for me after the official ATT NoDo update.
JamesAllen said:
Anti-shake is on by default for me after the official ATT NoDo update.
Click to expand...
Click to collapse
Me, too. Still have blurry pics, though.
in low light indoors you might want to try the setting photo quality on medium instead of the default hi setting.

A serious display problem!

Hy guys,
I have a serious problem with my SGS II display.
When different dark colors such as black,blue, red and others appears on my display the color on its orizontal position it seems to be bespattered.And now my display is so annoying.
The problem is getting worse when the phone is heating up.
The phone was running KE7 + root.I tryied to factory reset but the problem didnt disappear.
I need your help.PLEASE!
Its a return under warranty job if factory reset has failed .
Alternative is to flash a later firmware .
jje
Can you take pictures of it, I cant seem to imagine how it looks like.
print screen
what is the combination for the print screen on SGS II? I tryied back+home and it didnt work.
What is the folder for the print screens?
ionutzBA said:
what is the combination for the print screen on SGS II? I tryied back+home and it didnt work.
What is the folder for the print screens?
Click to expand...
Click to collapse
You might need to take an actual photo and not a screen shot.
pictures
screenshot + normal view
Waiting for advices!
Thank you!
The pictures are totally out of focus. But in those faded pic I don't see anything wrong, do you?
ithehappy said:
The pictures are totally out of focus. But in those faded pic I don't see anything wrong, do you?
Click to expand...
Click to collapse
The actual pictures all look fine to me but in the screenshot I am seeing some "colour banding" which is normal at the moment as the device is creating 16bit colours and not 32 bit (yet anyways).
OP... Is it the colour banding that you are talking about? If so then that is normal for now I am afraid.
You can simply press and hold the home button and then the power key and release both to take a screenshot. You can then see them in the Gallery.
ionutzBA said:
I need your help.PLEASE!
Click to expand...
Click to collapse
No, actually you need help from Samsung (repair) or where your purchased it from (return or exchange). If you're running a stock ROM and did a hard reset the problem's obviously not software.
You can clearly see in the pictures (although they are terribly out of focus) that there seems to be a blue bar goes across the screen where the image is, and it's not there on the screenshot.
That's a hardware problem and the phone needs to be returned and repaired/replaced.

Resources