I have tried to install iGO8 on my Jade but I always get strange error messsages.... may I ask you what exactly version on iGO8 you are using? And if possible, can you post a copy of your sys.txt?
Thanks.
Hi kosmepe!
I actually use IGO v.8.0.0.41506
My sys.txt -->
[folders]
app="%SDCARD%/iGo8"
[interface]
maxzoom=6000000
show_exit=1
That's all and it's workin' fine!
Greetings
liquidair said:
Hi kosmepe!
I actually use IGO v.8.0.0.41506
My sys.txt -->
[folders]
app="%SDCARD%/iGo8"
[interface]
maxzoom=6000000
show_exit=1
That's all and it's workin' fine!
Greetings
Click to expand...
Click to collapse
I have the same sys.txt and it works for me also !
Hi mates, thanks for your help.
I just installed 8.0.0.54000 from my old archives and indeed it works... I would however like to know if somebody has version 8.3.xxx working on Jade!
kosmepe said:
hi mates, thanks for your help.
I just installed 8.0.0.54000 from my old archives and indeed it works... I would however like to know if somebody has version 8.3.xxx working on jade!
Click to expand...
Click to collapse
congratulations! :d
hi.
i use iGO v. 8.3.1.57021 and it works well. i also had problems with starting, but i could solve them (my license file was corrupt).
my actual sys.txt is (i have the german version):
[folders]
app="\Speicherkarte\iGO8"
sdcardpath="\Speicherkarte"
data="\Speicherkarte\iGO8"
[interface]
skin="ui_igo8"
resolution_dir="240_320"
maxzoom2d=6000000
show_exit=1
[power]
backlight_sync_with_OS=0
powermgm_state=0
battery_warning_limit=10
[debug]
skip_eula=1
show_oneway=1
show_speed_limit=1
http://www.ipmart-forum.com/showthread.php?t=328000
All you need !
BozaPub said:
http://www.ipmart-forum.com/showthread.php?t=328000
All you need !
Click to expand...
Click to collapse
Hi, I just installed the above iGO8, but when I start the program, it stays at Init API and then just crashes out. Any ideas on how to fix this? Thanks in advance.
I had also an error-message during init-api.
I just replaced the license file in the folder "LICENSE" and then it worked.
Finally I managed to install 8.3.2.64873 from the forum mentioned above (but from another thread) and it works fine!
edit:
This is the one I downloaded and installed: http://www.ipmart-forum.com/showthread.php?t=326143
jerrizhao said:
Hi, I just installed the above iGO8, but when I start the program, it stays at Init API and then just crashes out. Any ideas on how to fix this? Thanks in advance.
Click to expand...
Click to collapse
Yo have to edit your sys.txt like this:
[folders]
app="%SDCARD%/iGo8"
[interface]
maxzoom=6000000
show_exit=1
change %SDCARD% accordint to your settings
kosmepe said:
I have tried to install iGO8 on my Jade but I always get strange error messsages.... may I ask you what exactly version on iGO8 you are using? And if possible, can you post a copy of your sys.txt?
Thanks.
Click to expand...
Click to collapse
I have v8.3.2.64873 now, before i had 8.3.2.64029, both worked.
Now i have v8.3.2.71348 and this one also works perfect.
--------------------------------------------------------------
My sys.txt is like this:
[folders]
app="Opslagkaart/iGO8" (Opslagkaart is Dutch for Storage Card)
[interface]
maxzoom2d=6000000
show_exit=1
[device]
sdcard_dsk_num=7
--------------------------------------------------------------
sys.txt worked on both versions.
BozaPub said:
Yo have to edit your sys.txt like this:
[folders]
app="%SDCARD%/iGo8"
[interface]
maxzoom=6000000
show_exit=1
change %SDCARD% accordint to your settings
Click to expand...
Click to collapse
%SDCARD% is OS language dependant, for example:
Dutch OS = Opslagkaart
German OS= Speicherkarte
English OS = Storage Card
Tom Lenferink said:
%SDCARD% is OS language dependant, for example:
Dutch OS = Opslagkaart
German OS= Speicherkarte
English OS = Storage Card
Click to expand...
Click to collapse
French OS = Carte de Stockage
Portuguese?
"storage card" is "cartão de memória"
Can someone translate those two leters?
Thank´s
Nav N Go iGO 8 v8.3.2.71348 UPDATE
There is a update to v8.3.2.71348 available on ipmart-forum: http://www.ipmart-forum.com/showthread.php?t=328000:)
I have a problem....!
On my Jade I read: insert original application SD card.
The original card is inserted.
??????????
Thanks.
My SYS.txt for v8.3.2.64029 NOV 7 2008 on french Jade/3G
[folders]
app="Carte de Stockage/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
skin="ui_igo8"
resolution_dir="240_320"
vga=1
[device]
sdcard_dsk_num=7
I've used iGo8 v8.0.0.x with sdhc 4GB but worked only a cuple of times and crashed. It wouldn't start. Now I am using iGo8 v8.3.2.71348 from:
http://www.ipmart-forum.com/showthread.php?t=328000
with the sys file:
[interface]
maxzoom2d=6000000
show_exit=1
[map]
2dheadup=1
and works just fine with 1Gb microsd.
However after a phone call iGo8 freezes and needs restart.
Can someone explain what causes sdhc 4GB crash?
I wouldn't go much above v8.3.2.71348. I am using the July update version. The most current version is a little too buggy with road alert feature. I gotta work on something for us Jade Clone owners.
Related
Hi All,
Is the pre-installed TomTom 6 installed in the P3300 ROM itself or is it on a SD-card when you buy the "telephone" together with the basic TomTom?
Greetings Ben...
it is in the ROM itself.
It is in ROM and Maps are on DVD and can be installed on the SD-card
Hi,
The install program is not in ROM but in EXT_ROM, and once installed the exe file is in \program files.
KR, Imer
Imer said:
Hi,
The install program is not in ROM but in EXT_ROM, and once installed the exe file is in \program files.
KR, Imer
Click to expand...
Click to collapse
Yes, to be "more technical"
Sorry to ask a basic question, but is there a 'newbie' type of thread that might briefly explain about Rom and extended rom.
@andromeda9:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners
I can't run Igo8 on my Rhodium... I install and when i run the Igo8 it does nothing....
WM 6.1 Professional
CE OS 5.2.21048
Can you help me, please
Thanks
Did you try to edit the sys.txt file with your storage card path?
Hi:
I found this thread which should be helpful:
http://forum.xda-developers.com/showthread.php?t=526573
I think so....
here it is...
[folders]
app="Opslagkaart/iGo8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=2097152
sound_q_length="200"
no_file_cache="0"
cache="1024"
enable_roadshadow=1
[map]
popup_info=1
show_labels=1
3d_max_tiltlevel=9000
[msnd]
msnd.start=0
[tts]
tts_buffer=131072
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0
[sound]
queue_length=200
I don't think it's installed correctly. Check the iGO8 folder in your memory card to make sure that iGO8.exe is there.
bachviet said:
I don't think it's installed correctly. Check the iGO8 folder in your memory card to make sure that iGO8.exe is there.
Click to expand...
Click to collapse
Everything seems to be ok.... I can't understand!
I'll forget Igo8 and return to TomTom....
Thanks you all
my sys.txt says nothing but this
[folders]
app="%SDCARD%/iGO8"
[interface]
show_exit=1
and it works fine. Locks fast, slick, PM me and maybe we can work it out with my files.
This works on att tp2!!!!!!!
hugo81 said:
I think so....
here it is...
[folders]
app="Opslagkaart/iGo8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=2097152
sound_q_length="200"
no_file_cache="0"
cache="1024"
enable_roadshadow=1
[map]
popup_info=1
show_labels=1
3d_max_tiltlevel=9000
[msnd]
msnd.start=0
[tts]
tts_buffer=131072
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0
[sound]
queue_length=200
Click to expand...
Click to collapse
This is the only thing that has gotten TTS to work on my ATT Tilt 2!!!!! Thanks soooo much... I have spents days trying to get it to work.... and NOW IT DOES!!!!
its so incredibly slow at loading....
ekerbuddyeker said:
its so incredibly slow at loading....
Click to expand...
Click to collapse
Takes the same time my Tilt did, and I just measured it at 33s. Not a big deal for me.
HELP!
Hello,
I am asking for your help with IGO. I used it with my fuze and had no problems. I upgraded to the tilt 2 (att) a few days ago and basically moved my sd card from my fuze to my tilt 2. When I go to run IGO, i get the opening sequence for about 2 seconds, the INIT API message at the bottom of the screen, and then it shuts off completely. A total return to the homescreen. I am using NRG's october 28th standard rom. Any help would be greatly appreciated.
I downloaded the data.zip from:
This link has a data.zip for igo 8.3 claims it supports 480x800...
However upon starting igo it says:
Code:
Failed to open file:
ui_igo8/240_400/main_scheme.ui
exiting application
Any ideas?
Thanks
Kris
MOD edit: link to warez' site not allowed
try with this SYS, change the red marked text with the name of your storage card. If you installed IGO8 so you have to copy the sys also to your device ;
[project]
name="igo8_pda"
[device]
type="Touch Diamond II"
[folders]
app="Tarjeta de almacenamiento/iGO8"
[interface]
skin="ui_igo8"
vga=1
[rawdisplay]
highres=1
autoconfig=1
driver="gdi"
[sound]
ding=0
[sound.announcer]
traffic_jam=1
Recalc_voice=0
[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
use_all_building_textures=1
[map]
3d_max_tiltlevel=8250
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1
[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
multipoi=1
[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
text_guidance=1
[timezone]
auto_index=29
default_timezone=32 ; GMT+1 amsterdam
index=32
manual_dst=0
reset_os_timezone=0
sync_os_timezone=0
use_auto=1
[3d_config]
disable_roadsign_navigation_mode=0
roadsign_lines_per_screen=16
use_all_building_textures = 1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0
[3d]
max_poly_segments_shown_1=400
min_poly_segments_shown_1=200
[map]
3d_scale_carmodel=1
3dcarsizemin=3000
3dcarsizemax=6000
3dcarsizemul=15000
mapfontscale=180
roadsign_lines_per_screen=16
use_all_building_textures = 1
[tts]
announce_exit_directions=1
always_say_road_names=1
announce_street_name=1
[interface]
laneinfo_signpost_enabled=1
signpost_coloring=1
show_exit=1
backlight_methods = 1, 5, 6, 7, 8, 10, 12, 18, 21, 23, 24, 25, 26, 27, 28, 33, 36, 37, 39, 40, 42, 46, 49, 50, 52, 53, 54
McRIP said:
try with this SYS, change the red marked text with the name of your storage card. If you installed IGO8 so you have to copy the sys also to your device ;
...
Click to expand...
Click to collapse
Still doesn't work - any other ideas
thanks
Kris
ok, if you open the data.zip you will see that thera are only 2 resolution suportet (320X240 and 480X272), in this data file is also no inf file for diamond2.
For me the iGO version that function flawless is iGO 8 v8.3.2.97313 (Jul 3 2009) - R3 PDA version wich you can found easy in the web you mention with the sys y put you above.
**AxLor Leo**
Rom Base 1,72
All Driver from rom 1.72
Windows Mobile Proessional 6.5.21898
HTc Sense 2.5.20.1214.1, with landscape support
Mortscipt 4,2
LZX Compressed
Suggest Radio 2.09
this rom is not compatible with Radio from Rom TMouse
Total Memory:235 MB
NCF 3,7
Meteo database di Tigro
Additional apps in Folder Extra:
AdvTaskManager
BsBTweak
EbookIndexer(only full version)
Enterbootloader
eT9
PimBackup
PocketRAR
Shake and Save(only full version)
TotalCommander
Link for enable/disable keyPadLedControll(new)
HTCFlashLight
Thank's to
My best friend Fab985 e Nikoan89
Antoniomistetta, heavyhms for test rom
Special Thank's:
Bepe e Cotulla for HSPL
OndraSter e Airxtreme for Kitchen
Dinik for icons,slide, lockscreen
Djcedric, Steve007, Cookiemonster, jhoncmolineux,
Minuted74, Antoniomistretta, Dena994, Makeveral, Ronenpag, Linux, smaberg
for application,graphic mod and tweak
List is very long
thank's to all developers that improve ours rom and device
*AxLor* Leo ITA Version
DOWNLOAD
*AxLor* Leo WWE Version
DOWNLOAD
Autoinstall Folder
DOWNLOAD AUTOINSTALL FOLDER
Content in Folder Autoinstall:
Cookiemonster HomeTab 1.6.1 (Lang ITA modded by Alesscam, only version ITA)
CHTEditor 1.6.1
cleanRam 1.9.9
Clock by Dena994
hd2Wobble
SetupDialUp
StartMenùgrid 4Columns
Taskbar B&W AxLor
Touch X BG all tab manila land
Touch X Top curtain Removed
Put my or your forder Autoinstall in root SD,with cab and xml files
and after flash will be autoinstall
Added CAB for enable Landscape+Autorotation(WWE-ITA)
if you wont enable Autorotation Sense,after install Cab,go to G-sensor and
calibrate your device
CLICK HERE
reserved....................
another...........
Good Work Ale
Tireless!
antoniomistretta said:
Tireless!
Click to expand...
Click to collapse
I am bored
alesscam said:
I am bored
Click to expand...
Click to collapse
We move to Android, will be sold the HTC EVO 4G?
Recommended Radio?
antoniomistretta said:
We move to Android, will be sold the HTC EVO 4G?
Click to expand...
Click to collapse
incubonero said:
Recommended Radio?
Click to expand...
Click to collapse
not use Radio from rom Tmouse
my radio suggest is last 2.09
work well for me and for my rom
This rom looks real nice Allesandro! (did i spell that right?)
Radio_2_09_51_03
g.lewarne said:
This rom looks real nice Allesandro! (did i spell that right?)
Click to expand...
Click to collapse
thanks mate
a day will be made the rom perfect?
a little question the rom is only the full version?
There is a cab to put the ringtones that you removed?
IO ME MEDESIMO said:
a little question the rom is only the full version?
Click to expand...
Click to collapse
Hi mate
yes....
in this moment
m.ilbello said:
There is a cab to put the ringtones that you removed?
Click to expand...
Click to collapse
you can find original ringtones in HTc official site
Ciao Alesscam,
gran bel lavoro,
una domanda, è possibile in qualche modo portare il tasto del menu start
nella parte inferiore?.
Grazie e auguroni di buona Pasqua a tutti.....
_______________________________________
Hello Alesscam,
great job,
an application, you can somehow bring the start menu button
at the bottom?.
Thanks and best wishes for a happy Easter to all .....
Dear chefs,
I am trying to cook the new builds of manila core 2015 on my HD2. The thumbnails in the internet shortcut on the manila internet tab does not get saved. I have tried replacing the manila internet EXT with 2014 as well as 2011 the thumbnail fails to get stored.
Any body who can suggest the solution..
did you use BrowserSnapshot_1_0_19224019_0 ?
Same issue here, i use Manila_Core_2_5_20153712_0 and BrowserSnapshot_1_0_19224019_0
any idea? thanks
vauss said:
Same issue here, i use Manila_Core_2_5_20153712_0 and BrowserSnapshot_1_0_19224019_0
any idea? thanks
Click to expand...
Click to collapse
Inside tha Package Browser Snapshot v1.0.19224019.0 you'll see the file app.reg, open it, then search for:
[HKEY_CURRENT_USER\Software\HTC\WebSnapShot]
"Enabled"=dword:00000000
and change for 1:
[HKEY_CURRENT_USER\Software\HTC\WebSnapShot]
"Enabled"=dword:00000001
Best Regards!
--------------------------------------------------------
Dentro del paquete Browser Snapshot v1.0.19224019.0 verás el fichero app.reg, ábrelo y busca esto:
[HKEY_CURRENT_USER\Software\HTC\WebSnapShot]
"Enabled"=dword:00000000
Y cambialo por un 1:
[HKEY_CURRENT_USER\Software\HTC\WebSnapShot]
"Enabled"=dword:00000001
Salu2 Cordiales!
i have 0 and it works on 2014
Ryrzy said:
i have 0 and it works on 2014
Click to expand...
Click to collapse
Also in the device registry?
There's the posibility that other file change this setting.
Cheers!
Thanks a lot for responding.
I use Manila_Core_2_5_20153712_0 and BrowserSnapshot_1_0_19224019_0.
the websnapshot registry is set to 1
[HKEY_CURRENT_USER\Software\HTC\WebSnapShot]
"Enabled"=dword:00000001
Still there are no snap shots.
any other clue?
I swopped Opera with another version and it works fine, the browsersnapshots show.
Laurentius26 said:
I swopped Opera with another version and it works fine, the browsersnapshots show.
Click to expand...
Click to collapse
Which version of opera?
Laurentius26 said:
I swopped Opera with another version and it works fine, the browsersnapshots show.
Click to expand...
Click to collapse
Mind sharing which version of Opera you are using?
build 35964 works fine for me
thanks
Thanks a lot friends.
By changing the Opera version to older one I have the problem Solved.