Artemis Touch 4.02 Full with 4 sided cube ROM FOR ARTE110 - P3300, MDA Compact III upgrading etc.

Is "Artemis Touch 4.02 Full with 4 sided cube" Rom compatible for arte110/ HTC P3300 with wm5.0? I want to upgrade my current rom to this one? Any ideas on how to......

I successfully flashed this ROM without any problem. But I need some help using it. Where can I find hard reset/ clear storage? and I think this new ROM consumes power faster.
Though, I must say. It's a very nice ROM, very smooth and works well on my arte110/ HTC P3300

i`ve successfully istalled this rom to my p3350 and it`s working great! I`ve installed Spb Mobile Shell and iit`s workin perfectly! Thank you for all your posts

Related

Can i upgrade my HTC 3350(HTC Love)with Artemis Vanilla 4.02

I have downloaded Artemis Vanilla 4.02. But i want to be sure whether it is a correct ROM. Please advise. Thanks in advance.
I'm not sure. But why don't you give a try? Download the ROM, start flash after ActiveSync. If it goes further then you're lucky. Else it says incompatible device and thats it. No harm.. Just try..
I am doing it for first time. So I would like to know wherther it will brick my device if it is not compatible and also I would like to know it Artemis Vanilla 4.02 is a good ROM or not
bhawin said:
Can i upgrade my HTC 3350(HTC Love)with Artemis Vanilla 4.02. I have downloaded Artemis Vanilla 4.02. But i want to be sure whether it is a correct ROM.
Click to expand...
Click to collapse
This is one of the best rom I have used at my P3350! But remember to use USPL before flashing your device.
Thanks a lot Tomme45i for your guidance.. But where can i get the USPL.
I found USPL utility - HTC Artemis update SPL V.01(USPL v.01). Kindly let me know if this is good enough
bhawin said:
I found USPL utility - HTC Artemis update SPL V.01(USPL v.01). Kindly let me know if this is good enough
Click to expand...
Click to collapse
Here is USPL: Artemis Update SPL (USPL) v.01, you can use that or, if you download meschle rom, use Step 1, then Step 2
Thanks again for sparing time and giving your valuable guidance.
Successfully installed Artemis Vanilla Touch 4.02
Have successfully installed Artemis Vanilla Touch 4.02 on my HTC 3350. Thanks forum and both the members who guided me for the same.
can i try full version of the same ROM. Please advice
Tried Full Version
I tried full version over this weekend & I almost bricked my device. I think Vanilla is best
Success.........!!!!!!
Though I'm a newbee to the WM thing, managed to install Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Full, Lite and Vanilla) to my HTC P3350 perfetly, the thing works perfectly, The contact list looks really cool really don't know how to thank u guys at xda dev, a big thanx goes out to all the moderators, specially "meschle" and "pof" for their excellent roms, progs and the Tutorials.... keep up the nice work guys...... Thanx once again.......
Artemis 4.02 Touch Lite with cube
Yesterday I installed Artemis touch 4.02 lite with cube. It is working wonders. In fact my PPC has become faster than it was with Vanilla. Thanks forum, Thanks meschel. Thanks everybody
I have downloaded Artemis Vanilla 4.02 .I had tried to installed it in HTC.Had taken to 3% and stopped.Can anybody who have installed this Rom to help me. IPL , SPL 1.36.0001 GSM 02.67.90 OS 1.36.00 .Thanks
You have not mentioned which HTC model. It works only on HTC 3300 Artemis & HTC 3350(Love)
bhawin said:
You have not mentioned which HTC model. It works only on HTC 3300 Artemis & HTC 3350(Love)
Click to expand...
Click to collapse
I have P3350
You have to first unlock your cid. This can be done by clicking start uspl in the folder
did you click on start uspl to start the process
Artemis 4.02 lite with 4side cube
hey this is best rom for HTC love. This is my 3rd day after installing it and it is extremely stable, less battery hungry and reasonable fast.
bhawin said:
did you click on start uspl to start the process
Click to expand...
Click to collapse
I had done clik to uspl but the process is stoping there and is telling wrong connection.Then if i run the ROMupdate.exe is stoped at 3%.Thank a lot for help.

HTC P3300 Upg WM6 --> WM6.1

Hey there. I just bought an HTC P3300 and i want to install WM 6.1, isit possible?
Also, what is this: Artemis Vanilla 4.02?
whtzeb said:
Hey there. I just bought an HTC P3300 and i want to install WM 6.1, isit possible?
Also, what is this: Artemis Vanilla 4.02?
Click to expand...
Click to collapse
congratulations for ur ppc
yeah its possible to go wm 6.1
try the latest wm6.1 http://forum.xda-developers.com/showthread.php?goto=newpost&t=401062
dude this will make ur ppc a real diamond
read about uspl first or u will brick ur device
http://forum.xda-developers.com/showthread.php?t=308242
dont start flashing until u know all of the ins and outs
whtzeb said:
Hey there. I just bought an HTC P3300 and i want to install WM 6.1, isit possible?
Also, what is this: Artemis Vanilla 4.02?
Click to expand...
Click to collapse
did ur ppc came with wm6?
One question, I am also a nOOb
I have XDA Orbit (same as P3300) with installed Touch Flo software.
Can I install this rom?
Quick answer is......: YES
But don't forget that you will loose all your saved personal data and your installed programs.
And don't forget to read this also:
http://forum.xda-developers.com/showthread.php?t=308242
Cheers
Prepare for really nOOb-ish question
I bought used XDA Orbit, and he has already installed WM6 Touch Flo.
What will be my next step, do I need only to install Tom-Oops-Black-v1.0-WWE?
I suppose that my XDA Orbit 02 is already unlocked
First you need to know what do you want to do...
Trying to explain to you, touch flo is just like a program installed with flo functions.
If you flash a new ROM, you must see if it has or not touch flo, wich programs it has standardly, etc.
Tom-Oops-Black-v1.0-WWE is not a program that you install... It's a ROM that you flash...
Explaining to you in another way...
Is like... You now have XP on your desktop and you want to have Vista. In the desktop case you have to install vista.
In the PDA case you have to flash a new ROM.
Did you understood? hope so :d
Cheers
@Zecanilis
I have few problems with my O2 XDA Orbit
At least once a day I am unreachable. On Home Screen everything is normal, but people cannot reach me.
I checked for installed ROM :
WM6 Pro CE OS 5.2.162 (build 18521.0.7.0)
ROM Version Artemis Touch 3.01 WWE
Radio 03.07.90
Protocol 4.1.13.51
I would like to try new Black Ops ROM.
Do I first need to do this, or just install a new ROM
http://forum.xda-developers.com/showthread.php?t=308242
http://forum.xda-developers.com/showthread.php?t=311403
Do I need to format SD Card or not?
I there any tutorial how to install a ROM on the forum (please link)?
Sorry once again on my noobish questions, I still learning about all this.
I think it's better you run allways USPL first.
http://forum.xda-developers.com/showthread.php?t=311403
So RUN IT before flash the new ROM!!
Since you're going from one cooked ROM to another, flash the new ROM twice to make sure everything goes ok.
You don't need to format your SD card. BUT, if you have programs installed on it, they problably will not work.
Cheers
@Zecanilis
Thnx
I successfully installed Black Ops ROM.
First I run USPL and then I installed new ROM.
Everything is OK for now.
If you have more problems with network or if your battery is draining more than usual, try to upgrade your Radio ROM.
You will not loose any data upgrading your Radio ROM and can give you better reception and less battery drain.
See here:
http://forum.xda-developers.com/showthread.php?t=397939
Cheers
Can you please tell me which Radio ROM would you recommend?
Now I have installed 3.08.90
I recomend you to try 3.21.90. For me and for most of users is the best choice.
This doesn't mean that is the best for you, but just flash it and see if is good for you.
cheers
Thnx once more for you more than helpfull post.
I will try new radio rom in next couple of days, first I would like to test this one just for comparison.

Looking For O2 Orbit ARTE200 Roms with SDHC

Hello
I'm new to the ARTEMIS community and only just realised there are so many ARTEMIS models so im confused about which ROMS i can use
I've been looking for a WM6.1 rom with SDHC support for the Orbit ARTE200
got any suggestions ?
Cheers In Advance
Hi
I am more or less in the same boat. My Orbit 1 already has wm6.0
Is it possible / practical to update to 6.1 with touch flo. Will this make it the same / similar to orbit 2 (though slower).
Is processor / rom / ram capable of supporting this spec?
What rom? Is there a comprehensive tutorial?
Thanks in anticipation
Best ROM by far are the Artemis Touch roms, unfortunately the creator has left the forum, but there is a thread here which still has the links. This gives you touchflo, and the HTC Home plugin, amongst various other tools.
I use an Orbit 1 - downloaded the ZIP with Artemis Touch 4.02 full, and there's two batch files in there, first one for USPL, then the second one for the ROM itself.
Artemis Best Rom
Guys, the best Artemis Touch v4.02 is here:
4.02 Full with Cube
4.02 Full with no cube
4.02 Lite with cube
4.02 Lite with no cube
4.02 Vanilla
I've been using it months already, and everything is perfect.
lordrobin3k said:
Guys, the best Artemis Touch v4.02 is here:
4.02 Full with Cube
4.02 Full with no cube
4.02 Lite with cube
4.02 Lite with no cube
4.02 Vanilla
I've been using it months already, and everything is perfect.
Click to expand...
Click to collapse
lordrobin3k
thanks for the links, much appreciated
Artemis Touch 4 Roms
I haven't got around to flashing the ROM as yet
I wanted to ask if this rom supports SDHC type 1 and type 2 cards
I want to go buy a larger size memory card so considering microSDHC cards
8GB or 16GB but before I buy it i wanted to confirm whether Artemis Touch ROMS supports microSDHC
Please could someone confirm, Cheers
How did it go?
Hi,
I have an O2 UK XDA Orbit (wifes old contract phone) and am interested in unlocking so I can go to vodafone for pop3 gprs and I am considering WM6.
I was wondering if you have flashed your phone yet? How did it go and what version?
Also I have to ask what is the with cube/without cube.
hey
welcomes
well first you have to CID UNLOCK your phone before flashing any ROM or you will brick .. for that see HERE
and second choose a ROM you like.
i don't like cube.. for me not a big deal... the latest thing of these stuff is the manila 2D.
now i'm using the YuE line with manila v11.3 which you can see in my signiture.

02 atom clean 6.1 rom not cooked

where can i get a clean 6.1 rom without ant addons without touchflo, java machine etc just a clean and stable 6.1 rom pls?
anyone pls?
i really need your help badly
hi how are you
you can download any pedivt rom , when you are runing the program you will see option chose only
I wish I help you ^^
bajaoc said:
where can i get a clean 6.1 rom without ant addons without touchflo, java machine etc just a clean and stable 6.1 rom pls?
Click to expand...
Click to collapse
For O2 XDA Atom Black (Original 1st Atom Series) you can try WM6.1 R2 Clean By Helloworld1 Build 20755. And don't forget to install EXTROM (Should be installed if you want Atom's ROM working properly) too.
Tested on my O2 XDA Atom properly and it's working without any problems at all! I think it's the best WM6.1 Clean ROM than the others WM6.1 ROM.
another thing i'm using opera mini in browsing the net is this unit only stand for approx 3 hours? are there any o2 atom user can atest to that battery life of my atom or is it my batt i'm using pdaviet sonblack winmo 6.1. .

Qtek S110 Help please...

Hi guys months ago my uncle gave me a Qtek S110 but it has installed WM2003, I was browsing through cotulla's website and I found a lot of ROMs
My questions are...
1-Which rom should i install?
2-Can i restore my device to the configuration that i had before?
3-Will my device run WM6.5 apps?
4-How can i improve touch sensibility?
PS:I have 128MB Ram
thanks for helping...
Im looking forward to help and be helped...
best room now is wwe 03 link it's 6.1
[http://cotulla.pp.ru/Magician3.html]
the problem in 6.5 that it has no camera but if you want to install it that is the link[http://cotulla.pp.ru/Magician6.html]
the new rom will make your screen sensitivity better
before you install the new rom you must be sure that your radio is 1.12
if it isn't you must install it first
and yes you can return back to your originall rom
all applications run
have fun
alright thanks

Categories

Resources