Related
So it seems that I'm unable to play back any video format besides WMV.
WMV's play back fine while other formats (e.g. xvid, divx) do not play back at all. Coreplayer crashes to today screen or shows me a green garbled screen with vertical lines.
WMP just freezes and does nothing.
Is this a known issue (I didn't find anything using search)?
Any format of audio plays back perfectly fine (as long as it is not embedded in a video).
I had this, you need to change the Video driver to Raw frame buffer and all will be well. I use TCPMP and this was what I had to do for it to work.
findus said:
I had this, you need to change the Video driver to Raw frame buffer and all will be well. I use TCPMP and this was what I had to do for it to work.
Click to expand...
Click to collapse
I had done this at first initially too, but simdeo (fellow member) suggested Imageon setting, but NOT Imageon Hardware decoder. This has massively improved speed and visual quality, but you will get intermittent lines across the interface, but not in full screen mode. Settings should be:
TCPMP:
Video Driver = ATI IMAGEON
Buffering = Microdrive (ticked)
Advanced = Tick only: D-Pad, Use System Vol, Benchmark (none od these settings affect performance, just my preference - but selecting other options may adversly affect performance)
Direct Draw = YV12 and tick 'Overlay with colorkey' only.
That's it. Best performance to date and can play torrent or own DVD rips perfectly, providing they were not encoded as high as 640x480.
I'm having the same problems but cannot for the life of me find any settings on Coreplayer that will let me change the buffer settings or the driver.
I'm sure I'm missing something here.
Coreplayer version =1.0.4 build 716
It's the latest version afaik.
Adey
Ok, I found the settings in Coreplayer (yeah, I know, should have looked harder..) and all is now well.
Ok, so I've got really decent playback from standard 350mb XVid TV programs but I'm still having what appear to be buffering problems.
Does anyone know what the ideal buffer settings are?
Adey
I have found that overclocking the CPU yields in much better playback (although not perfect).
If I want to view a 640x480 video I run the CPU at 728 Mhz (what program would allow higher?), but still the fps is not up to par. I would say the playback is around 90-95%.
Calavaro said:
I have found that overclocking the CPU yields in much better playback (although not perfect).
If I want to view a 640x480 video I run the CPU at 728 Mhz (what program would allow higher?), but still the fps is not up to par. I would say the playback is around 90-95%.
Click to expand...
Click to collapse
Hi Calavaro. What app are you using to o/c the CPU? & exactly what settings do you use? Oh and lastly what's the power consumtion like if left on 728 Mhz all the time?
Cheers.
mackaby007 said:
Hi Calavaro. What app are you using to o/c the CPU? & exactly what settings do you use? Oh and lastly what's the power consumtion like if left on 728 Mhz all the time?
Cheers.
Click to expand...
Click to collapse
we use PHM to overclock our device, if you set to 728 and push mail and bluetooth all the time, you won't last for whole day, maybe just about 7 hours. But really you don't need your device on 728 all the time, and personally i think 728 is a bit unstable, so i use 662 when my device is on, otherwise 228 the rest of the time to save battery.
You MUST disable the internal scale from the PHM setting, otherwise it won't work
wu5262 said:
we use PHM to overclock our device, if you set to 728 and push mail and bluetooth all the time, you won't last for whole day, maybe just about 7 hours. But really you don't need your device on 728 all the time, and personally i think 728 is a bit unstable, so i use 662 when my device is on, otherwise 228 the rest of the time to save battery.
You MUST disable the internal scale from the PHM setting, otherwise it won't work
Click to expand...
Click to collapse
Thanks for that Wu. What version of PHM are you using?
mackaby007 said:
Thanks for that Wu. What version of PHM are you using?
Click to expand...
Click to collapse
latest version from the website
wu5262 said:
latest version from the website
Click to expand...
Click to collapse
Cheers mate. Got it now. Latest version 4.13 is found here:
http://www.wizcode.com/downloads
mackaby007 said:
Cheers mate. Got it now. Latest version 4.13 is found here:
http://www.wizcode.com/downloads
Click to expand...
Click to collapse
btw, mine one says 4.14 for some reason, and i can't remember where i get it from....
findus said:
I had this, you need to change the Video driver to Raw frame buffer and all will be well. I use TCPMP and this was what I had to do for it to work.
Click to expand...
Click to collapse
just wanted to say thanks for this thread. was going nuts with the same problem re: vertical lines, pink screen, etc. almost made a post to ask you guys what kind of parameters or settings you used for your video players. i use core and i confirm that the "raw frame buffer" works well.
cheers
About TCPMP with the best settings applied as mentioned in this thread, is there something else we can do to further improve the playback quality?
I have some clips that feature "fast moving action" e.g. action scenes in movies. These clips will actually play, but when the "fast moving action" is there, you can see that it isn't going really that smooth/fast enough, resulting in noticeable, fast upcoming blocks/lines when you look closely. I'm not sure how to describe this effect best, but I guess pretty much everyone knows what I mean here.
Thanks!!
JayRayMee.NL said:
About TCPMP with the best settings applied as mentioned in this thread, is there something else we can do to further improve the playback quality?
I have some clips that feature "fast moving action" e.g. action scenes in movies. These clips will actually play, but when the "fast moving action" is there, you can see that it isn't going really that smooth/fast enough, resulting in noticeable, fast upcoming blocks/lines when you look closely. I'm not sure how to describe this effect best, but I guess pretty much everyone knows what I mean here.
Thanks!!
Click to expand...
Click to collapse
Hi.
Try playing any 3 minute segment of the video you have then click on File/Media Info and check the resolution of your video. If its below 640x480, then the problem is most likely a low bit rate used to encode the video, hence the pixelated blocks in high speed.
You can get away with less, but I encode now only at 480x320 @850kbps and get superb results each time...DVD quality and High definition quality too when I encode from HD source.
Can't say anymore than that. Click on my name and look through my posts, there will be a recent one entitled something like 'Excellent playback via Coreplayer & TCPMP'. This should help a bit if you have the time to read.
I've set my Coreplayer up as per the posts elsewhere in the Athena threads and the video quality is almost perfect now.
I'm using 320x240, DivX 6, 500-700KBps constant bitrate files.
Stereo MP3 audio. 96kbps or 128kbps.
After 10 mins of playback the audio slowly starts to lose sync (it plays fine on my PC).
Has anyone got any ideas what I need to do to stop the audio from losing sync?
Any help greatly appreciated.
hi
when you say "outof sync", does this mean that the audio is fine but the video is not "in time"? if yes, that's exactly what i was going to ask in the forum =) but i'll be trying the parameters you set. i've been meaning to ask the "optimized" setting for this application.
cheers
Robson said:
hi
when you say "outof sync", does this mean that the audio is fine but the video is not "in time"? if yes, that's exactly what i was going to ask in the forum =) but i'll be trying the parameters you set. i've been meaning to ask the "optimized" setting for this application.
cheers
Click to expand...
Click to collapse
Yep, that's exactly it. It starts off fine, then ever so slowly the video gets ahead of the audio.
I've 'fiddled' with just about every setting I can think of within Coreplayer but have yet to find a solution.
Yep, that's exactly it. It starts off fine, then ever so slowly the video gets ahead of the audio.
I've 'fiddled' with just about every setting I can think of within Coreplayer but have yet to find a solution.[/QUOTE]
well, at least your video gets ahead. for me it's the other way around...the video is late yet the audio sounds perfect =)
cheers
ive already asked this question. with no replys. ive tried every setting and format possible. still loses sync. it doesnt matter if its from the sd card micro drive or streaming. it still loses sync. ive even tryed disabling the auto scaler and running tcpmp over clocked. still loses sync. im a a loss. if you find a solution let me know.
I guess we need to wait for the next version of Coreplayer which will (hopefully) be released on the 18th of June. It supposedly fixes some of the ATI issues.
I am so sick to death of this subject!! Not mad at you guys, but at ATI/AMD. This has been an ongoing issue since September last year when the TyTN was released with the ATI Imageon chip, and due to no input or support from ATI/AMD, Corecodec cannot fix this issue as it's to to with the Imageon hardware.
Bottom line is find the settings that work best for you. For me, I find TCPMP v0.72RC more stable and versatile than CorePlayer v1.04. Also set Video driver as Imageon (NOT Imageon decoder!) this yields best performance and visual quality 'during' playback.
If you're using DVD-Rips use the above setting, but if your playing/stretching QVGA 320x240 on your Athena, then Rawframebuffer mode is even more stable in the GUI, but lacks the ooomph of the Imageon driver, which to some extent might well eradicate your lipsync issues.
One more test folks. Play your video whilst your Athena is pluggen in to mains power. See if the lipsync is still out. If it is make manual adjustments in the A/V offset in TCPMP under Advanced.
mackaby007 said:
I am so sick to death of this subject!! Not mad at you guys, but at ATI/AMD. This has been an ongoing issue since September last year when the TyTN was released with the ATI Imageon chip, and due to no input or support from ATI/AMD, Corecodec cannot fix this issue as it's to to with the Imageon hardware.
Bottom line is find the settings that work best for you. For me, I find TCPMP v0.72RC more stable and versatile than CorePlayer v1.04. Also set Video driver as Imageon (NOT Imageon decoder!) this yields best performance and visual quality 'during' playback.
If you're using DVD-Rips use the above setting, but if your playing/stretching QVGA 320x240 on your Athena, then Rawframebuffer mode is even more stable in the GUI, but lacks the ooomph of the Imageon driver, which to some extent might well eradicate your lipsync issues.
One more test folks. Play your video whilst your Athena is pluggen in to mains power. See if the lipsync is still out. If it is make manual adjustments in the A/V offset in TCPMP under Advanced.
Click to expand...
Click to collapse
Rgr that - will test later - thanks!
Ive got the exact same problem on my x7510 i start playing it and slowly the video will go ahead of the audio and its out of sync very easy to detect when your viewing a lecture. ive tried all kind of video players
Vico100 said:
Ive got the exact same problem on my x7510 i start playing it and slowly the video will go ahead of the audio and its out of sync very easy to detect when your viewing a lecture. ive tried all kind of video players
Click to expand...
Click to collapse
How cam that you can use it.
I'v tried 0.72 version as well as 0.81 and both give me the "crash.txt" error while starting TCPMP.
Oh, you are using CorePlayer not TCPMP, right?
im using coreplayer the latest version becuase tmcp as you said keeps on crashing, (for me too).
With a hard reset playing even a video in windows media player still gives a audio lag. Its so bad, now i don't care about quility just let me have a video with audio i don't care how bad the video looks like.
Does anyone have any solution? ive tried all kinds of "video output" settings and it still gives audio lag (even raw framebuffer)
FINALLY! ah found it after lots of searching of google and forums and sites...
its -400ms and its perfect thought the whole video..
(Note: the best method that i use to see if its in sync is to watch a lecture and then watch their mouth real careful and you'll see that -400ms gives the best results )
Vico100 said:
FINALLY! ah found it after lots of searching of google and forums and sites...
its -400ms and its perfect thought the whole video..
(Note: the best method that i use to see if its in sync is to watch a lecture and then watch their mouth real careful and you'll see that -400ms gives the best results )
Click to expand...
Click to collapse
What is this -400Ms?
-400ms is -400 milliseconds as in time. The minus sign means "start playing the video 400 milliseconds ahead of the audio. Its perfect for core player put all the settings on max just take acceleration and dithering off. And it plays a DVD rip perfectly no conversion very sweet on its 5 inch screen
If you don't know put the -400 in the settings next to "manual A/V offset +/-" and just type in "-0.400"
Vico100 said:
-400ms is -400 milliseconds as in time. The minus sign means "start playing the video 400 milliseconds ahead of the audio. Its perfect for core player put all the settings on max just take acceleration and dithering off. And it plays a DVD rip perfectly no conversion very sweet on its 5 inch screen
If you don't know put the -400 in the settings next to "manual A/V offset +/-" and just type in "-0.400"
Click to expand...
Click to collapse
Thanks for sharing this tip!
Vico100 said:
-400ms is -400 milliseconds as in time. The minus sign means "start playing the video 400 milliseconds ahead of the audio. Its perfect for core player put all the settings on max just take acceleration and dithering off. And it plays a DVD rip perfectly no conversion very sweet on its 5 inch screen
If you don't know put the -400 in the settings next to "manual A/V offset +/-" and just type in "-0.400"
Click to expand...
Click to collapse
So does this work or not???
I am confused, because on the other thread, you mentioned it did not work.
it does for like 5-10 minutes then audio gets our of sync
Vico100 said:
it does for like 5-10 minutes then audio gets our of sync
Click to expand...
Click to collapse
Thank you for this information.
Vico100 said:
im using coreplayer the latest version becuase tmcp as you said keeps on crashing, (for me too).
With a hard reset playing even a video in windows media player still gives a audio lag. Its so bad, now i don't care about quility just let me have a video with audio i don't care how bad the video looks like.
Does anyone have any solution? ive tried all kinds of "video output" settings and it still gives audio lag (even raw framebuffer)
Click to expand...
Click to collapse
Does it play flv files as well?
Tadeusz said:
Does it play flv files as well?
Click to expand...
Click to collapse
Coreplayer plays flv files, yes. There's no need to separately install additional component. It benchmarks better than TCPMP in my test.
How can I get to camera settings? i took video and uploaded it to Youtube and saw that the highest resolution was 420p. This phone advertises 720p quality. I cannot find how to set it to 720p. Has this happened to anyone else?
When you are in the camcorder, the last setting on the right side of the capture screen, change that to HD(30m).
Thank you, I have no idea how I did not see that!
could it be the app converted it if you actually used the hd 30m
Going to try to explain this... When I'm using the stock Camera app, the picture is normal. But when I switch to Camcorder, it seems to be automatically zoomed in quite a bit. And when I try to zoom out, it says that since I'm recording in HD, zoom functions are not available.
This is kind of annoying because now I have to step back probably 5 feet to fill the same frame of when I was taking photos.
Is this normal for everyone else too? Or do I have some weird glitch on my unrooted and pure stock ROM?
Yep, mine does it too (stock rom). It only does that in FullHD resolution. I guess the only use middle part of the sensor to read the data to achieve greater speeds, and thus it's gonna be a hardware limitation.
Who need HD anyway ? The lens hardly catch with it. I record 720x480 and I'm very pleased with teh quality.
Change the video recording resolution in the settings pane to 1280x720 and that should fix your problem.
hank00k said:
Change the video recording resolution in the settings pane to 1280x720 and that should fix your problem.
Click to expand...
Click to collapse
Yeah I noticed that.
But that doesn't make sense. In photo mode, same resolution as video mode but in video mode it's zoomed in. Like Dr. Sid said, it seems that it uses a smaller section of the image sensor to capture video. Which again doesn't make sense. Weird.
This is definetly a speed optimization - scaling down the whole resolution of camera sensor from 3264*2448 -> 1080p is much more expensive operation than just cropping the central pixels, i assume someone at samsung was VERY lazy to have done the camcorder mode in such a lame way, it's still ok for recording outside scenes but useless for in-room recording.
I find this quite annoying also. At first I was wondering if it is a ROM glitch or something, since some of the people here stated that even in stock ROM it is present also.
I hope there is some kind of patch to this, full HD recording is really awesome and I hate to see the 'zoomed' effect.
Yeah noticed the same thing just last night.. Seems to also affect the camera's ability to focus properly in video capture mode as well... Shame on them, I wish I had noticed this sooner.
I've been using the stock camera app which is updated on my 6P and I can't figure out how to get it to shoot 4k video. Anyone else have any issues? I made sure that the video is set to shoot 4k but when I do take a video it only shoots in 360p resolution? Not sure what I am doing wrong. I really don't like the google camera app.
I've tried shooting in portrait and landscape mode and changed all the settings around but still can't figure it out.
No issues here. Just tested and set to UHD 4K. It produced a 4K video. Stock Camera.
Hmmm, not sure what I am doing wrong then? Can I ask what settings you are using? thanks!
I'm actually perplexed as to how you manage to shoot in 360p, as the lowest option I have is 720p.
TheReverend210 said:
I'm actually perplexed as to how you manage to shoot in 360p, as the lowest option I have is 720p.
Click to expand...
Click to collapse
This! I also like tacos.
tzmueller said:
I've been using the stock camera app which is updated on my 6P and I can't figure out how to get it to shoot 4k video. Anyone else have any issues? I made sure that the video is set to shoot 4k but when I do take a video it only shoots in 360p resolution? Not sure what I am doing wrong. I really don't like the google camera app.
I've tried shooting in portrait and landscape mode and changed all the settings around but still can't figure it out.
Click to expand...
Click to collapse
What is reporting 360p resolution? Sounds like YouTube. If so, have you tried changing the quality setting?
Sent from my Nexus 6P using Tapatalk
NM
tzmueller said:
I've been using the stock camera app which is updated on my 6P and I can't figure out how to get it to shoot 4k video. Anyone else have any issues? I made sure that the video is set to shoot 4k but when I do take a video it only shoots in 360p resolution? Not sure what I am doing wrong. I really don't like the google camera app.
I've tried shooting in portrait and landscape mode and changed all the settings around but still can't figure it out.
Click to expand...
Click to collapse
> Open stock camera app
> Push the 3 bar menu in the upper left hand corner
> Select 'Settings'
> Select 'Resolution & Quality'
> Video Sub-Header
> Back Camera > Select 'UHD 4K'
That should be all; where are you getting 360p from? Shoot a video and then look at the properties, it should display the H x L pixels, which will tell you the resolution.