P4000 Randomly Failed! - Mogul, XV6800 General

Hi everyone,
Without any mods the phone randomly turned off while writing an email. When I tried to turn it back on I noticed the red text on the white "HTC" screen was gone, it would then reboot and do the same thing over and over again.
I've tried the "restore" with the two dot buttons but it did nothing, The boot loader screen only shows"
"TITA100
SPL-1.01.0000
USB/Serial (depending on if the USB is connected)"
I didn't have time to unlock it so I can't get it past "loading..." when I try to load any ROM. Telus has replaced the phone but I'd like to get something on it, original modified or Linux. I'm also a complete n00b with this so PLEASE help!
I forgot to add, I don't care if it connects to a carrier, only wifi since I'll only be using it around the house. Thanks

PROGRESS!
Alright, I pulled the latest Telus ROM from the executable download on HTCs site as explained somewhere on the forum.
the bootloader shows
TITA100
SPL-2.07.0000
CPLD-9
Click to expand...
Click to collapse
in the red area and
"USB" or "serial" in the white.
Does that help any?
Can someone let me know what is suppose to be on this screen so I can try to figure out where it's getting stuck?

Got it!
I just had to switch back and forth between the two .nbh files in the Telus download on HTC's site. Only issue is wireless isn't working but I'm sure that wont be as hard.
Thanks everyone

Related

Help! Upgraded my p4300 with TNT, now phone boots to TSOD! PLEASE HELP

I just realized I should post this here instead.
Hello,
Today I upgraded my G4 HTC p4300 using the TNT ROM Pro+HTC Home. It is unlocked, but the splash screen was branded for Unicel.
The Upgrade seams to have worked on the computer end of it, but When I boot my device, it shows HTC Mobility logo, then goes to the Red, Green, Blue screen. If I plug it into the computer with USB, I hear the USB connection sound, and USB appears in the lower left hand corner of my p4300.Active Sync does not see my device. I tried Re-flashing the ROM and it gives me an error. I have also tried the Wizard love ROM Spanish version(couldn't find the English) that resulted in a connection error.
What should I do?
Any help would be greatly appreciated.
Who is your cell carrier?? I only ask because you're one of the only other people that call your phone the "P4300" I've had mine for over a year and know everything their is to know about it. I've discovered through trial and error and befriending an HTC big shot that the P4300 Wizard was the generic version of all the Wizards countless incarnations. My point is I've got the correct roms and ext roms to get you back in business. let me know.
Aaron
HTC P4300

Help. HTC Ozone Bricked

Hello everyone,
The other day I dropped my HTC Ozone into a hot tube. I looked around online to see if there was a easy way to dry out my phone and a site told me to place my phone in a bowl of rice for a day or so. That worked and I can now boot my phone but only to the bootloader (Red, Green, Blue and white screen). It says CEDA100 Spl-0.39.0000. I was able to hook up my phone with a usb cable but was not able to run the romupdateutility that comes with the hardspl by jockyw package. When I try to run the romupdateutiliy, It does not see an image version that is currently installed and when I try to update the image, it changes my phone to a progress bar but never moves. After waiting some time, the update returns "Error 262 : Error updating".
Any help would be great.
thanks,
***POINTLESS POST WARNING***
holy crap that sucks!
ive never heard of placing it in a rice bowl..taking the batt, sim and mem card out and letting it self dry yes..but never in a rice bowl lol..
either way..if ur in a boot loader then i think ur safe, someone should pop up with an answer shortly
yep, it really sucks... Not sure what to do from here. Any help would be great.
thanks,
same issue but caused by bad flash of 6.5. any help would be greatly appreciated.
Does anyone know about loading IMG files from a SD card? It looks like my bricked Ozone will boot or load a image file from the sd card. If I name the cedar-original-spl-0.39.nbh file cedaimg.nbh, my phone will try to load it after the bootloader. Right now it says loading... and it has been that way for 10 minutes.
thanks,
please help i have a dead htc ozone after trying to read codes by software,i have now dead one cant boot and cant reconized by the computer
please any idea help me
Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose
prj102 said:
Hello everyone,
The other day I dropped my HTC Ozone into a hot tube. I looked around online to see if there was a easy way to dry out my phone and a site told me to place my phone in a bowl of rice for a day or so. That worked and I can now boot my phone but only to the bootloader (Red, Green, Blue and white screen). It says CEDA100 Spl-0.39.0000. I was able to hook up my phone with a usb cable but was not able to run the romupdateutility that comes with the hardspl by jockyw package. When I try to run the romupdateutiliy, It does not see an image version that is currently installed and when I try to update the image, it changes my phone to a progress bar but never moves. After waiting some time, the update returns "Error 262 : Error updating".
Any help would be great.
thanks,
Click to expand...
Click to collapse
I dont have a HTC Ozone, but it looks to me like if your memory got damaged. Not sure if it can happen on the ozone though.

Stuck on WM load and can't flash.

Hi all,
i have a problem with one device here - Orbit II.
It is stuck on booting WM with volume controls on the screen. Usually it's not a big deal and can be solver with HR or by flashing a new rom, but the problem is that i cannot get it to do a HR: white screen with warning appears but when i press send buttong(the green one) - nothing happens, it doesn't react at all.
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Magnus23 said:
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Click to expand...
Click to collapse
press & hold camera button and make soft reset...
Thank you for the answer but i as said in first post, i have tried this, the white screen with the warning appears but pressing Send button does nothing, device does not react to this, so hard reset doesn't happen.
If someone could point to me any other way to enter bootloader - i can work my way from there.
I have also tried MTTY but USB connection doesn't appear in the list(yes, i have killed the activesync processes).
which screen
1st,
2nd, radio protocol version
3rd gif splash
4th wimo load screen
And also what rom have you got on atm.
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Magnus23 said:
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Click to expand...
Click to collapse
o well then i take its not hard-spl'd in which case i really do not get it, i have got into bootloader at the radio version screen so i dont get this one?? Is it still covered by o2 warrenty, it is 2 yrs long so best bet go to them and see what they say...
Thats if it has no hard-spl... If not take the battery out for a day and see if that brings it back to life, stranger things have happened seen that solve quite a few problems.
Well, device is not mine, a friend asked to look at it. I don't think he got a warranty left.
Well, the thing is, its not a big deal realy, it's not bricked or anything, i just need to get into bootloader, from there i can flash hardspl and the rest from SD... i just haven't seen this thing before... unable to enter the bootloader.
Is there any way to force the device to enter bootloader? I mean other than the standart procedures of Camera+reset?
I think i've seen somewhere a CustomRUU that could do that, even with incomplete WM boot. Like send some commands to the device to enter bootloader.
Does anyone know anything like this?

[Q] Please help with my Titan 6800

Upgraded my Titan from its Telecom stock rom (I'm from New Zealand) to the following:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship
But it no longer boots into Windows Mobile. It starts up as if it is going to boot, with a black Windows Mobile 6.5 screen coming onto the screen, and some numbers in red that then come onto the screen after a couple of seconds. The numbers on the bottom left are:
M-09
B-03
On the bottom right the numbers are:
P ACAAAAM-4070
R 1.47.00
D 3.56
Then it goes to another screen that says
HTC Windows Mobile
Powered by PPCKITCHEN
Once on this screen, nothing else happens. I can get into the Tricolour Bootloader Screen, which has the following numbers in the top red portion:
TITA100
SPL-1.04.0000
I have tried upgrading different things, but either the bootloader just goes to a screen that says "loading" and nothing else or it just comes up with a white bar that never moves off 0%.
Would really appreciate any help someone can give me on this. Would even consider sending to anyone who knew how to fix it, if they were pretty sure they could, as I can't seem to be able to do anything with it after days of searching forums, etc.
try renamed NBF file to TITAIMG.NBF put in <2G MicroSD card to flash
Yea, I have played around alot trying to do that. Used a standard MicroSD card, not SDHC. And still had no luck with all I did.
Note: I would even be willing to pay someone through paypal if they could help me fix it over the internet. Any takers?
You get this fixed yet? If not try locating a WinMo 6.0 shipped rom and try flashing that. Your bootloader is the stock non-gps version and it sounds like it does not like the new rom.
If you get it booted, then unlock with bootloader 2.40, then flash any 6.1 or 6.5 rom.

Serious problems with (semi?) bricked HD2

Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
SS and HX in the bootloader screen just means Samsung or Hynix, , two chip providers HTC uses. They do the same thing, and you can forget about that for now, you have much bigger issues than one chipset being slightly better than the other.
The pink on black screen is a splashscreen, anyone recognise it? winmo? android?
The HTC website started dropping support pages for the HD2 a month or two ago, , looks like its ancient history as far as HTC are concerned.
Qualcomm MSM,,, this is a bad sign, , it is what the bare chipset presents itself to the usb connection as when there is no controlling bootloader. (This is what tmous users get when they radio brick their phones). Quite an odd symptom to see in a phone that powers on.
From the various power / boot symptoms, it sounds likely that one or more of the following are true
1 - the battery may be low on charge, and if magldr is installed the battery wont charge until android is running (which of course it cant) so you NEED to get magldr off ASAP (if in fact it flashed)
2 - the radio may be corrupted, which usually manifests itself as flashes failing at 8 - 10%, or radio flashes never completing.
3 - The phone may be one of the unlucky ones that has/is cooked/cooking itself. have a read on the 'freezer trick' where you cool the phone down for a while in a bag in the freezer, then quickly flash from sd as soon as you take it out, so the chips don't overheat before its done. If this turns out to work, then the phone has hardware issues.
4 - The bootloader itself may be corrupt, but only slightly (just theorising now) or the NAND memory where the bootloader is stored could be starting to degrade.
Recommended way forward.
Assuming you have access to a card reader,,,
send me your IMEI and an email address, and ill generate you a Goldcard.img,
follow THIS to make teh goldcard and place on that goldcard the RUU_Signed.nbh (renamed to leoimg.nbh) extracted from, , lets go for the WWE 3.14 rom from HERE (Lotta junk in that folder, scroll way down towards the bottom, look for filename as below)
id go for
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.zip
down towards the bottom.
(Thats assuming you want english? theres probably a DE one if you prefer)
SO, id try flash that from the goldcard, and report back.
(Note i'll be on and off all day, so don't expect an immediate response to your IMEI, cheers, oh and the .img when i send it will most likely get spam foldered, so dont miss it!)
I created a goldcard myself and tried the image inside "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.zip".
While flashing it showed me "RSA Fail" on "Radio_v2".
Any ideas? I'll try other ROMs till someone answers
Thanks,
iCEQB
EDIT1:
Trying "GER" Roms:
1 test) HTC_HD2_RUU_Leo_HTC_GER_1.66.407.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe - "RSA-Fail" on "Radio_v2"
Ahh radio fail, bad news. I've seen it cured once or twice, by flashing the phones original rom, but I suspect those were exceptions.
I've also seen failed flashes take when you well chill in the freezer (card sim and battery out while it chills) and quickly flash on removal.
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
samsamuel said:
Also, just confirm you made a hd2 winmo goldcard, the free goldcard page at revskills is for wp7 and android phones.
Click to expand...
Click to collapse
Yeah I used the wp7 config. Is it bad? I mean, the goldcard works right?
test 2) RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe - "RSA-Fail" on "Radio_v2"
I'm out of ideas guys ... will wait for you to create me a winmo goldcard image and try them again.
Last resort is the freezer trick. Or any other ideas on how to progress from here?
Regards,
iCEQB
EDIT: BTW, does HSPL need to be deinstalled for these goldcard actions?
Ohhh hang on, that img i sent wont work, silly me, its not the imei I need, its the Cid (unique serial, uid, goes by a few names) of the SD card. See the howto I linked ya for how to find it.(really easy if you have access to any other winmo phone, not so easy otherwise.)
Just shows how long its been since I thought about goldcards.
Sorry.
Which branded phone is this?
Brother even I have same type of logo when phone starts (pink colour circle)
Even my phone is bricked but I can install wp7 or android (only no network problem)
Can u guide me how did u solve this issue pls
Thanks & Regards
SE_iCEQB said:
Hi all,
yesterday a friend of mine gave me his HD2 for repair, he bought it from eBay with a ROM failure.
I never tried to fix / flash any HTC, so I read trough a lot of flashing guides and other peoples problems etc.
So I'll tell you whats working / what I tried / what I can do / what I can't do, in the hope someone can make sense out of this and help me
1) The phone has a strange behaviour in terms of the battery. It only turns on if I'm lucky. This means if I pull the battery out and back it and try to power it on, I get a light / weak vibration (and if I'm lucky) it boots into the states mentioned in point 2) and 3). If I'm unlucky on the other hand, it just stays at a black screen, but still gives me this light / weak vibration. Windows recognises the phone in this back-screen-state, but doesn't like it that much, since it wants drivers for a "Qualcomm MSM .... something" device.
The best way to get the phone back to book (in the possible states mentioned in point 2) and 3).) is to let the battery rest fro a little while and plug it back in ... or I spam the phone like quickly plugging the battery out and in and prey that it somehow boots.
2) The "booting" I was talking about in point 1) doesn't mean it boots into any OS. I attached a picture which shows the state of the phone when I try to boot it normally via the power button. It just freezes there at this pink circle and does nothing. If I'm not wrong it should show the radio version etc. in red in the bottom left corner, but we'll get to that
Things I can do:
3) I can get into bootloader mode.
4) I can flash HSPL 2.08 and 3.03 ... or it's stock versions however I like.
5) I can execute "task29.exe" which finishes its job successfully.
Things I tried (and noticed):
6) I tried to flash "MAGLDR" which also finishes successfully (according to the install tool at least), but does nothing on the phone, same screen as in the attachment.
7) I tried to flash the latest radio ROM (v.2.15.50.14 afaik) via "CustomRUU.exe", which get stuck on 96%. "CustomRUU.exe" later on tells me that the communication betweeen the host and phone failed.
8) The phone doesn't seem to be branded, yet I tried to flash both T-Mobile and unbraded roms and 2 different versions:
Code:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship.exe
ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship.exe
If I flash those with HSPL and the installer it came with it stays at 0% forever.
If I flash them without HSPL and the installer they came with they get stuck at different point somewhere between 8% and 10% and if I wait for 10 seconds, the progress bar turns red and a "!" appears at the end of the progress bar, the installer later on tells me, that this version is not for my phone or something.
If I flash them with HSPL and "CustomRUU.exe" the progress bar also get stuck at the above mentioned %-marks, but the progress bar stays green and does nothing for 10 minutes, after that the "CustomRUU.exe" tells me that the communication with the phone failed.
Some things I noticed:
9) While I was spamming the phone with battery I once got to a point where the charging LED light up for the first time in this whole process I went trough with this phone.
10) After point 9) I plugged the battery out and back in and powered it on via the power button. I got to the screen I attached below, but it didn't got stuck there, the screen just faded to black and the phone shut itself off. I managed to do this 2 times in a row, after the third try it froze again and I was back there where I was before (points 1-8 ).
This is it As you can see I tried a lot of stuff, yet I think I've overseen something and I hope you can help me there or got some other ideas apart from the JTAG'ing method, which shouldn't be an option for now, as getting into the bootloader mode is worth gold afaik, so we should be able to do something via this mode right?
Best regards,
SE_iCEQB
BTW: I can also get into the hard reset mode, but of course this gains nothing on this phone
EDIT1: Another thing I noticed, is that in the bootloader mode it says "SS-BC" in the top line, where on every other picture I saw of this phone in its bootlaoder mode, it says "HX-BC" or something, dunno if this is important.
The phone came with a german packaging, so I only tried the "DE" roms mentioned in point 8).
While I was searching for roms, some people said that I can check the S/N of this phone on the HTC website which I couldn't find ... is it gone or am I blind already?
Click to expand...
Click to collapse
Do a jtag on it it will fix everything i think
Sent from my Nexus 7 using xda premium

Categories

Resources