Hi
For whatever reason, my device doesn't have the wifiinit.exe file. I've been trying to figure out what is wrong with the wifi on the device for days now.
I've hard reset and flashed the rom a million times, but for some reason, the wifi initiation file is never present.
Could someone please download their wifiinit.exe file and upload it here?
Thanks
Which device?
My Touch Pro shows no file of that name.
thanks for the reply
Htc ppc6800 (Titan) (mogul)
Well, I'm trying to get the wifiinit.ink file to run, but I understand that it's a shortcut file.
So I need whatever exe file that is launched by the wifiinit.ink
No such file on my Polaris either. You running Windows 6 or 6.1?
my X1 also does not seem to have this file. what are you trying to do with this file anyway
if you want to simply start wifi from a shortcut simply install AKTogglewifi and put the shortcut anyware
I used to have a Wizard and still have the kitchen I used for it. In this kitchen in the \OEM\OEMAPPS folder are two files 'wifiinit.exe' and a shortcut to it 'wifiinit.lnk'. These files aren't in my Kaiser so I assume it isn't needed on all devices. I have attached it but I am not sure whether it will work for you or not?
Andy
Related
How do I install a cab file please.?On my Mda 2 ?I installed the mppc 2003 SE merged rom up date (from this site), on my MDA 2 and it worked oK for a couple of days then the device hard reset itself and there was no camera soft ware on it anymore. I thought if I installed the camera software on its own from this site that might be the answer. But it is in cab file form and I DONT KNOW WHERE TO BEGIN/ can anyone help please?
Installing a CAB file is easy...with ActiveSync, drag the file from your PC to your PDA (I drag them to the windows dir, but not sure if this is really necessary).
Then, go to your PDA, to the dir where you dropped the CAB, and just click it once...that is all.
About your other probs, I have no idea...I guess I need more info.
Good luck.
more details about installing cab files?
thanks for your answer. I'm hopeful - but I'm really not very technical. Can I ask more details? When I open the "camera cab file" I get a screen full of little icons all the same. Is each of these a seperate cab file? - do I open the "camera cab" folder, and then drag each one of these little icons seperately to my pocket pc document folder. Or should I NOT open the "camera" folder but just drag the WHOLE folder into my pocket pc document folder - and then active sync with my mda 2. I wish there was a site where I could see the instrucions clearly - with DIAGAMMEs! is there such a site? thanks...
copy the whole cab file
Does anyone know how I can convert png or ico files to dll files so that it can be used with SK Shortcut Manager or PocketTweak to create shortcut icons?
I have been searching online for a method for a long time and it appears that the only way to do so is by using Visual FoxPro. However, I don't have this program and there isn't a trial version i can download. (I don't want to spend money buying a program just to make a few dll files for my shortcuts)
I have also tried some other freewares and trial softwares online but none of them are successful.
Any help with this is greatly appreciated. Thanks.
Attached here are the 3 icons i would like to turn into dll files. If anyone know where to get them as dll files, that would be great too.
Loook for ResHacher, it is free!
http://rpi.net.au/~ajohnson/resourcehacker
Bulldog said:
Loook for ResHacher, it is free!
http://rpi.net.au/~ajohnson/resourcehacker
Click to expand...
Click to collapse
just see the link doesn't function.
Nevermind zip file attached. enjoy
Still not working...
i downloaded the program and used the IconDLL.dll file i got from PHM Tools then i changed the icons inside to the one i want. However, I still can't get it to work despit doing that.
What I did after getting the new .dll file with my icon in is use the shortcut creator program I found here. I tried to read other .dll files and i could see the icon but as soon as I use my own .dll file I made (which I put in the /Windows), it crashes the program. I then tried another program, the Strat Menu programs manager and I still could not read my icon.
I even went through all the post in this forum about shortcuts and tried some of the tricks there. I downloaded Microangelo Librarian and attempted to use IconDLL.dll by adding in my own icons (as vijay suggested in an earlier post), however, according to the advice he gave, that should be it and it should've been easy. This wasn't the case because I couldn't save the file as a .dll file since it said that the file is a read only file or is locked. I then tried save as but that only save it as a lib file.
I have been at this for a whole day now. Any advice would be greatly appreciated. Thanks.
** oh and I even tried using SK Shortcut Manager and I still couldn't read the .dll file I made :..(
Hi teresa611
I also use Microangelo Librarian.
what we have to do is just open the program.
1. Drag any icons into blank librarian.
2. Save as *.icl
3. Just rename those *.icl to be *.dll
4. Copy to PPC
5. Enjoy
Hope this help
tried and failed
even tho i changed the name to .dll, when i dragged it into my pda, it's still a librarian file and i was unable to read it. perhaps, i'm doing something wrong if it works for other people.
i'm starting to feel this is more trouble than it's worth. Thanks for the advice tho. If anyone else has any other ideas, please let me know.
teresa611 said:
tried and failed
even tho i changed the name to .dll, when i dragged it into my pda, it's still a librarian file and i was unable to read it. perhaps, i'm doing something wrong if it works for other people.
i'm starting to feel this is more trouble than it's worth. Thanks for the advice tho. If anyone else has any other ideas, please let me know.
Click to expand...
Click to collapse
For me, I have to put .dll into \Windows; otherwise, it is not work.
In addition, you may try using icon_viewer utility to view those dll in order to ensure it is a work dll.
The attach is icon_viewer. Copy to PPC and run.
Thanks. I'll try it later when I get off work. I really hope it works, cause I'm running out of forums to search
problem solved!!
just to refresh this thread and to give others some info if they're stuck with what I was stuck with. I finallt managed to create .dll files and use them in my pda as shorcut icons.
Instead of using Michelangelo Libarian which I am still confused about, I found this great freeware called "BeCyIconGrabber". It allows you to extract icons from .dll and .exe files and you can also load multiple icons there as save it as .dll.
Thanks again to everyone who tried to help
How to install the .xml files bundled in the cabs.rar?? I do not know how to make the extrom run automatically after the HR so i have to install each cab file 1 by 1, can anyone help??
Use the ones in cabs2. Also make sure you know what are those .xml for (they are replaced with .cab (s) in cabs2)
xml files are a typicaly a formatted text file like html
not really binary exe programs files
some programs use xml files to store settings and data
maybe they need to be in a location the program in question
will look for them
Rudegar said:
xml files are a typicaly a formatted text file like html
not really binary exe programs files
some programs use xml files to store settings and data
maybe they need to be in a location the program in question
will look for them
Click to expand...
Click to collapse
Did you mean copy the .xml files to the location of the program file ??
use HTCustom1.7.cab
yup...
I am having the same issue. I keep seeing these .xml files. I am not a computer guru lol. Do I cut and paste it somewhere on my phone or what? I am so lost please help.
Same thing here on my side mixtape_butcha. I'm subscibed in an Universal forum and have to install a USB switch which is a folder containing an xml file. I asked many time a guide on how to use it but nothing came back.
If you happen to know how to handle it, let me know. I'l do the same with you.
bests
Michael
first of all it is nice that you looked up a matching post yourself and obviously searched for a solution there, but...
if i get your problem right, it doesn't match the ones before. they were talking about .xml files that came with a cab file and stored the settings on how to install and execute.
you, however, talk about a subscribtion to a thread, meaning your xml file is an RSS feed, for which you need a special reader, since PIE is not a proper desktop browser and therefore does not handle feeds. but there is a lot of software out there to handle rss feeds. i personally use spb online 1.2, but there is also freeware, like this: http://www.dewantoro.net/search/pda+rss+reader+cab
i don't get the point with the usb switch though, maybe if that didn't solve your problem you should post further details about that issue and maybe post filenames or screenshots so we all know exactly what you are about to do.
You need not worry to install xml file if it comes with a cab. Cab file should be designed to use it automatically. xml files store usually configurable settings, it may be worth opening those files using any text editor like note pad or even IE to check the contents, that may help if any change is needed. But 99% chances are that you need not do any thing with those xml files.
I have found some people run in to this problem when they download a .cab file from the internet and once downloaded it is a .rar so you extract the .rar to find NOT .cab but .xml
Here is more about it and how to fix it.
http://forum.xda-developers.com/showthread.php?p=2367946#post2367946
I am trying to install a game on my MDA Vario IV , it does have .xml file. But no .cab files , only .000 file , .002 , .003 , and .004 files. How do i install this game then ? The installer is the .xml file.
EDIT : Nvm , fixed it , i needed not the files within the .cab file , but just the .cab file itself to extract in on my mobile.
Hello guys iam actually looking to install a sat nav software on my HTC TOUCH HD phone and i got this file called SETUP.XML Document and there's thousands of other files in the same location called KB, which i have no idea what they are but my problem is when i copy those files to my phone and open the SETUP.XLM Document, it opens by the internet explorer in the phone and it does nothing, please let me know if u know any answer to this.
Thank you very much....
nickholas said:
Hello guys iam actually looking to install a sat nav software on my HTC TOUCH HD phone and i got this file called SETUP.XML Document and there's thousands of other files in the same location called KB, which i have no idea what they are but my problem is when i copy those files to my phone and open the SETUP.XLM Document, it opens by the internet explorer in the phone and it does nothing, please let me know if u know any answer to this.
Thank you very much....
Click to expand...
Click to collapse
Couple of things:
You are in the wrong subforum. This section is for the Blue Angel. You should look for the Blackstone (aka Touch HD) section.
Now, the file that you opened is a cab file. You don't need to extract the contents of a cab file. Just copy it to your device and click on it one. The cab will install everything, including the settings in the xml.
Good luck!
Gili50 said:
I am trying to install a game on my MDA Vario IV , it does have .xml file. But no .cab files , only .000 file , .002 , .003 , and .004 files. How do i install this game then ? The installer is the .xml file.
EDIT : Nvm , fixed it , i needed not the files within the .cab file , but just the .cab file itself to extract in on my mobile.
Click to expand...
Click to collapse
Couple of things:
You are in the wrong subforum. This section is for the Blue Angel. You should look for the MDA IV (aka Touch Diamond) section.
Now, the file that you opened is a cab file. You don't need to extract the contents of a cab file. Just copy it to your device and click on it one. The cab will install everything, including the settings in the xml.
Good luck!
Okay it says its a cab. While I am very new to wm phones I have been able to install a ton of other cabs.
When I go to install this fist off it doesnt look like a cab it has the name and the windows flag and .rar as the extension.
When I click on it I get the following.
There is no application associated with "s2u2-0.3-WM5". Run the application first, then open this file within the application.
This is supposed to work with WM6 and I know others here have done it. I am just not so bright when it comes to this and cannot figure out what I am doing wrong. I tried just copying it into the windows folder but that didnt work either.
You have to extract the rar file to get the cab file inside for installation. Pls try again.
thanks
thanks mate works like a charm
hello guys, i dont own an hd2 yet but ill buy one this month but i have a question i want to add some cabs file on my device when i get. My question is i have download some cabs BUT when i open the winrar i dont get any cab file, all i get is some files that has bunch of numbers and one of them says "_setup.xml" so what should i do? should i directly put the winrar file on my hd2? since i dont get any cab file inside the winrar?? and if there's a cab file inside the winrar and i press the button "extract here" should i just upload the cab file only to my hd2 right??
Hope you guys can help me.
Thank you.
Hi.
A CAB file is a compressed installer file for mobile phones.
If you open it with winrar, you will see all the files it contains.
Just copy the original .cab file to your phone.
Click on the .cab file, and it will run the installer, and install the program on your phone.
You can choose to install to the main memory or the sd card.
Yeah - as above. What you're calling a "winrar" file is the cab file.
Extract a cab
Ok, I know this isn't the original question but...
is it possible to extract a .cab file - i mean to extract all the different files that make up the program , all the .exe .dll .ico etc etc. Wanting to do this to help me reverse-engineer a couple of omnia 2 cabs that don't work.
kinsago said:
Ok, I know this isn't the original question but...
is it possible to extract a .cab file - i mean to extract all the different files that make up the program , all the .exe .dll .ico etc etc. Wanting to do this to help me reverse-engineer a couple of omnia 2 cabs that don't work.
Click to expand...
Click to collapse
yes extract the files with winrar
ohhh okok i get it now.. so i just donwload thw winrar which is the cab file and i copy it to my hd2. thanks guys
Richy99 said:
yes extract the files with winrar
Click to expand...
Click to collapse
Tried that, all I get are 10 files. One of them is _setup.xml, the others are numbered files.
I've attached a screen capture of the files so you can see what they are.
kinsago said:
Tried that, all I get are 10 files. One of them is _setup.xml, the others are numbered files.
I've attached a screen capture of the files so you can see what they are.
Click to expand...
Click to collapse
Yes that's what you would expect as they are the cab install files.
If they don't mean anything are you sure you know what you're doing?
That's what I'm trying to find out. I assume that the WM program works in a similar way to windows program in that its a collection of files (exe, ico, dll, cfg so on so forth) that get installed in the appropriate places on the device. If so, how do you 'unpack' these files from the setup files
use a cab manager program. I don't so I can't recommend, but wincecab manager sound familiar. u can use them to create cabs of your tweaks, install files and such.
it seems that you have never used windows mobile (just copy the winrar file into the device and run it from the device)
hoss_n2 said:
it seems that you have never used windows mobile (just copy the winrar file into the device and run it from the device)
Click to expand...
Click to collapse
I'm not trying to install a cab file (which the first post was about) I'm trying to decompile the omnia 2 video editor to get it to run on the HD2 but instead of starting a new thread, I asked on this one because it seemed (partially) relevant.
BTW, I've got the cab 'extracted' so thanks - no for the difficult part...