hey there,
after i installed Microsoft .NET Compact Framework 3.5 from the official MS homepage, i softreseted my device
my touchFlow is gone..
phone seems to work properly, but there is no touchFlow after booting.
does anyone knows help?
greetings
i uninstalled it, and my touchflow returned.
but since there are some hints, to install 3.5, because many software needs it,
is there any solution known?
My TouchFlo stays enabled after installing the Framework. Maybe you can just activate it again (Start -> Settings -> Today -> Items) after installing the framework once again.
i figured out, that it doenst seems to be the framework
after changing registry values myself everything is fine
after a soft reset those changed values take effect, work properly (f. example "geo-tagging @camera" and "4 icons each line in program tab")
but my touchflow is disabled
if i undo my changes in registry, touchflow comes back instantly
i ll reinstall the framework again and test this thing out
Related
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..
Thanks man I will try it
let me try it. thx
Mirror please!
here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html
I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.
Sorry guys. Is the attached file corrupted or not complete?
leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)
Works really well, thank you!
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
I may have to try this once the results are in....
mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.
T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks
It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.
...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!
If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.
ADD Device Compatibility
Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!
Netcf3.5 isn't preinstalled in oem leo's rom..
all sense ui is standing on netcf2.0
a lot of apps need it,as all we know,to work propertly...
but,installing this version of netframework in our devices the finger friendly menu of
file explorer,menu enhancement and some menus gestures just dissapearing....for good!
i think that we have to find alternatives apps to use in our devices till some solution in this issue rise up....
if we don't want to loose some gestures and menu enhancement....
regards to community Dimitris
i have .net 3.5 installed and do not seem to be having any problems, try hard resetting.
I have also installed .net 3.5, but did not notice anything to disappear or stop working.
dragon_soft said:
i have .net 3.5 installed and do not seem to be having any problems, try hard resetting.
Click to expand...
Click to collapse
i have
os version 5.22.21684
manila version 2.519202525.0
rom 1.43.405.1(70124)WWE
and after HR twice the issue is the same...
i tryed even reflashing and HR the rom but the same..nothing changed
What exactly is not working?
I can't check explorer, because I have changed it with Resco Explorer...
I am not having those issues either, must be another 3rd party application that is causing your problem
where did you install netcf?
Also make sure your phone is using the 3.5 as default and not 2.5.
Go here:
HKLM/Software/Microsoft/.NETCompactFramework
Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disable 2.0 and enables 3.5.
tboy2000 said:
Also make sure your phone is using the 3.5 as default and not 2.5.
Go here:
HKLM/Software/Microsoft/.NETCompactFramework
Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disable 2.0 and enables 3.5.
Click to expand...
Click to collapse
thanks for the tip
i reflash the rom and after that works ok...
i didn't manage to find what caused that...
i had installed also in clear rom but the problem was there too...
anyway, it solved
thanks, Dimitris
Does anyone have simple instructions on how to install Compact Framework 3.5 on Leo? I need it for BsB Tweaks.
Gargamel29 said:
Does anyone have simple instructions on how to install Compact Framework 3.5 on Leo? I need it for BsB Tweaks.
Click to expand...
Click to collapse
Download it from the microsoft website..
connect your phone to the PC via active sync..
Double click the file on your PC.. it will install it on the PC an dthen simultaneously on the Phone.. follow the instructions shown on the phone..
This worked for me:
http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: http://www.mediafire.com/?ommgm3gz13z Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset./QUOTE]
thats a quote from this thread : http://forum.xda-developers.com/showthread.php?t=583638
Click to expand...
Click to collapse
Thanks for this. I used the 2 .CAB files which I obtained from the modaco site (still haven't installed a registry editor - my bad).
It worked without issue (apart from when I needed to figure out how to soft reset my HD2!).
I've got BSB tweaks working now.
I previously only installed 1 of these cabs, but i guess there no harm installing both if they serve different purposes.
Problems installing Net Framework
Hi Guys. I've got myself into a bit of a problem here. I downloaded an app. When I came to run it, it crashed saying I needed to install net framwork. OK, so no problem as I thought I had it installed already. I checked my installed programs and I could see it was already installed.
So, I uninstalled the app it and tried to reinstal the cab version of Net Framework. But, as soon as it starts the installation process, I get an error message saying that it's already installed in ROM. I rebooted the device thinking that would sort it, but it didn't,
Worst of all, now a load of other programs don't work because they can't find net framework 3.5
Ooo errr - anyone got any suggestions?
Thanks
Steve
check the registry and follow above directions, make sure it's pointing to 3.5 if already installed and not 2.0
net Framework
Hiya
Thanks for replying. Yes, I did follow the above instructions and yes, I have made sure that the registry is pointing to the correct version before I posted my query.
Any other thoughts
Steve
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Lovrock said:
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Click to expand...
Click to collapse
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
**** turpin said:
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
Click to expand...
Click to collapse
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
johncmolyneux said:
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
Click to expand...
Click to collapse
I performed a hardreset first via Software "1234" then via buttons (volup/down) but every time i try to install it, it says "Microsoft.NET CE 3.5CAB failed" and thats it....
What can i do ? It actually has worked at a certain point but after some hardresets it just doesnt install anymore (
Have you tried a different download? It may be that the installation you downloaded is corrupted. Also, if you're copying it to your SD card and installing from there, that could be damaged, so try it from the device.
Other than that, I really don't know what to suggest. I take it you've googled the error message you get. What did that give you?
Netcf3.5.9198
When I tried to install NETCF3.5 it told me I had a newer version already installed, so I didn't install it. Later I checked my registry and found that I have version 3.5.9198 installed. Does anyone know if BsB Tweaks will work with this version? (EDIT) Well, I tried BSB Tweaks and it seems to work ok with my version of NETCF3.5.
When I tried pinch to zoom on Opera 10, it worked, but also gave a small popup showing the image of the full screen centered on the lower center part of the screen. When ever you double tap to go back to full screen, the little popup disappears. ????
Hi guys,
recently my HD2 just didn't want to work anymore. Basically it was "on" and plugged via USB to my computer and when I came back by some time, it was completely "off". I tried to activate it but did not succeed to get further then the white screen, whatever I tried.
Result: hard reset.
As I saw that there is an official ROM which was newer than mine I downloaded 1.66er ROM from htc.com.
Everything wet well until I wanted to start Task Fascade. TF tells me: "For this application is a newer version of the Microsoft .NET Compact Framework required" (translated from german to english)
Okay, easy go, I downloaded the 3.5er version of the .NET framework and tried to install the CAB but the installer complains too:"The .NET Compact Framework-Version you are trying to install is already contained in the ROM" (message has also been translated from german to english)
Now I was confused, obviously the 3.5er version is already installed. So I did some search and found (once more) help on this page: forum.xda-developers.com/showthread.php?t=583638
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. [...] Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: [...] Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset.
Click to expand...
Click to collapse
I did everything I could and double checked the registry entries, rebooted several times but achieved nothing. TF still says the .NET version is too old and the 3.5 installer complains that 3.5 is already installed.
I need some help now