Network dhcp/static switcher - Windows Mobile Development and Hacking General

I use a static wifi network at home and use dhcp networks when out. I have to switch to dhcp easy but going back to static it clears the settings so I have to reenter IP, Subnet mask and gateway. Is there an easier way to do this? Maybe a mortscript? I've done alot of searching without finding anything. I may be entering the wrong key words.
Thanks for any help

Related

Wifi Network Profile Possible

Is it possible to have network profiles that are switchable? I have to connect at work with a static IP and it's really annoying to have to type it in each time. There must be some way to switch back and forth between DHCP and Static configurations.
gthing said:
Is it possible to have network profiles that are switchable? I have to connect at work with a static IP and it's really annoying to have to type it in each time. There must be some way to switch back and forth between DHCP and Static configurations.
Click to expand...
Click to collapse
Can we assume that it is not possible to use the same static IP at work and at home. I do even though my laptops etc use DHCP at home to get theirs. My TyTn connects just fine without changing any settings as the settings are stored automatically.
Mike
No, the same IP address will not work on both, nor will the gateway or dns settings.

Is it possible to give my Hermes a static IP?

I connect to a WiFi network where each component has a static IP, the problem being that my Hermes will take the earliest free IP address that it can find causing the PC which has that IP address to start spouting errors?
How can I remedy this?
If you have access to the router or buzz the (lousy ) administrator, configure the DHCP to a range that noone has a static IP in (for example x.x.x.250 and up)
After playing around with the router I think that I might have struck gold. Thanks for the speedy reply. I'll post an update in a day or two.
You can set fixed IP addresses on the device as follows:
Start>Settings>connections>Network cards>network adapters (tab)
Here you can then tap each type of connection on the list and choose either server assigned address or enter a specific address.
Mike

IP address in WLAN

Hey everyone. Well the title says it all. Is it possible to manually type in an IP address to a specific router instead of the phone actually automatically giving me one?? If not, are there any programs that can accomplish this?
thanks
Easy there, you want to enter a fixed IP in your router in the computer? Or you want to select IP in the case of its type in the IP network on your phone?
Depending on the router, it works with DHCP, Auto IP, this is more of the router for WLAN network, it is configured with an IP again, to not be that your network is DHCP, it?
Computer (fixed) -> Router (fixed) + Router (DHCP wlan)
Any wishes?
thanks
If you have the IP of your wireless network, and only enter the track in his case:
Ex: 192.168.0.x
Ja, if your network is DHCP, assigns an IP Auto, and so leave them the phone!
Do not confuse this: If the connection of your home is wireless (radio) you will configure your phone to use the same sign, so you need a wi-fi router
Yes, there is a way to set a static ip on your WM device. All you have to do is go to Settings, Select the Connections tab at the bottom, select WI-FI, Select Network Adapters tab, Make sure "The Internet" is selected from the drop down menu, Select IEEE 802.11b/g Compatible WI-FI Adapter, select Use specific IP Address and fill in the requested info.
I never really thought about it until you asked. i knew there was a way to do it i just never took the time to look at the options.
I hope this helps, if not let me know.
I'm having trouble understanding your question. the phone doesnt specify the IP, if the router has DHCP enabled, then it'll automatically assign the phone the IP. You want it so that when you're on your WLAN, the IP address is fixed? If that's the case, then go into your router's setting and reserve a specific IP that you want your phone to have. All you have to do is input your phone's MAC address into the router's setting with the desirable IP address. The next time you're on WIFI, your phone will have the IP that you assigned.

Wifi

Hello,
When looking in the wifi options of my HD2 I saw an option to set a static IP adres with dns etc.
Since I use static IP addresses at home and DHCP disabled, I set it up with a static IP. Works fine...at home. When I was at work I wanted to connect to the wifi there, but was unable to do so, probably because he was trying to use the static IP from home...
Why isn't the HD2 switching between these connections/IP settings?....
If this is not possible, why did they implement the option for a static IP on a mobile phone?
Ty
Just like on your laptop, if you assign a static IP it will keep it even if you move to work and connect there. You have to remove it manually to switch back to DHCP. Nothing uncommon.
If this is not possible, why did they implement the option for a static IP on a mobile phone?
Click to expand...
Click to collapse
Uhm didn't you give the answer? To connect to a network that has no DHCP...
I mean something as network profiles for each wireless network.
For example on my previous phone, a Samsung Jet, when I looked for wireless networks, I could set up everything for each different network he found.
Meaning when I selected my wifi from home he used the settings with the static IP from that profile, and when I was at work he selected the wireless profile with a DHCP IP from work.
Now I only have 1 set of options regardless of where I want to connect.
A static IP is not really "mobile" friendly to
There's nothing to do that by default in WM.
Seems theres an app for it though:
http://www.freewarepocketpc.net/ppc-download-wifi-profiles-v0-0-2.html
A static IP is not really "mobile" friendly to
Click to expand...
Click to collapse
Well, add a DHCP server at home
The static IP address is a setting for the network card, as you well know. The network card does not change just because you go to a different location. Also, due to a bug with Windows Mobile, you may want to forget about using a static IP address. I don't know about 6.5, but with 6.1 it caused my data connection to try and use the same IP address, which was obviously an issue with my service provider, who just refused the connection every time. I was without a data connection for a day, before I figured out what the problem was.

Something for CONFIGURE WIFI Profile in HD2 ?

Hi.
I need about a software, that allow to set multiple WIFI profiles, because in my home i need to SET MANUALY HD2 WIFI with net adress (192.168.1.1 etc.), but when i go out, i need to catch FREE WIFI SPOT so i need to set rapidly WIFI Configuration with AUTO IP (and when i'm at home, return to Manual Adress).
I had tried WIFI Profiles, but i can't understand how i can put AUTO IP ADRESS there.
Please help me !
Compliments for great site !
There is a program called Wifi Monster, have not explored it a lot, but sounds like it might do what you want ...
Just search for it ....
Hope it helps ...
i'm curious about why you have to use a static IP for your HD2 at home. you can set your home router for DHCP (just like the rest of the WIFI hot spots you like to connect to). if assigning a specific IP to your HD2 or to other machines on your network is important, why not use "static DHCP"? static DHCP is configured in your router and will ensure that each device gets the same IP address every time.
i have configured my home router so that 10 IP addresses are available for machines. the first 5 IP addresses are assigned to specific machines using static DHCP. the rest of the slots are available for guests and friends who occasionally bring their laptops/smartphones to my place and need to get on my network. the router works intelligently by reserving the static DHCP IP addresses only for my specified machines and uses the rest dynamically for unspecified machines.
on top of all this, i have MAC address filtering to keep a tight ship.
ASCIIker said:
i'm curious about why you have to use a static IP for your HD2 at home. you can set your home router for DHCP (just like the rest of the WIFI hot spots you like to connect to). if assigning a specific IP to your HD2 or to other machines on your network is important, why not use "static DHCP"? static DHCP is configured in your router and will ensure that each device gets the same IP address every time.
i have configured my home router so that 10 IP addresses are available for machines. the first 5 IP addresses are assigned to specific machines using static DHCP. the rest of the slots are available for guests and friends who occasionally bring their laptops/smartphones to my place and need to get on my network. the router works intelligently by reserving the static DHCP IP addresses only for my specified machines and uses the rest dynamically for unspecified machines.
on top of all this, i have MAC address filtering to keep a tight ship.
Click to expand...
Click to collapse
Maybe he needs a static IP for Work, some places still use statics ....
Thanks ASCIIker & WATCHER64
I'll try all your suggestions, however the first work fine, i'll fix MANUAL ADRESS on DHCP and put AUTO on HD2.
All work fine now, but i'll try also WIFI Monster when i need only MANUAL ADRESS on my ROUTER.
Thanks to ALL !

Resources