Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
pod8 said:
Hi there, my phones screen will not work, my friend kept opening and closing they keypad quickly after which he gave me the phone back and the screen did not work!
The problem im having is that the touch screen dont work, nothin else is wrong, the screen is not cracked, jus that it dont touch sceen no more.
The bad thing is I put it on boot mode and erased the phone memory, and since the touch screen dont work i can allign the cross thing.
Does anyone know a way in which i could fix this?
Cheers.
Click to expand...
Click to collapse
Mmmm. Tricky perhaps. A hard reset will either cure or leave you stuck. If you hard reset and the screen is indeed dead (touch wise) then you'll never get past the alignment stage. If the touch issue is software related then you would be sorted with the hard reset.
A gamble I think!!
However you are stuck at the moment so in a sense you have nothing to lose. If it ends up being useless then you are faced with a warranty (hopefully) repair otherwise some DIY though it's not entirely obvious what has broken/come loose - possibly just a ribbon connector.
Mike
Maybe the ribbon cable came loose on the LCD side?
myztikal47 said:
Maybe the ribbon cable came loose on the LCD side?
Click to expand...
Click to collapse
Yeah i think its that as well, i hard reseted it a few times with no effect, in the begining of the day, it could still reconise the screen taps around 2/3 times before it totally went dead.
Are there any tutorials on how to open it up to check the ribbon?
Thanks.
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
myztikal47 said:
This maybe the hardware problem with the mainboard itself. I read about this on here a few times, most people had the get their phones exchange....
Click to expand...
Click to collapse
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
mikechannon said:
Yes, I am equally unsure that this is just a simple loose connector. It may be, but it appears to be fine for a short while and only then goes off.
Like you myztikal47, I suggest going for warranty replacement if at all possible. Only if you have no warranty shuld you attempt a repair yourself - this is a notoriously ellusive fix and indeed I would say there is no 100% works for all answer. Certainly do not assume it's the screen - most probably it isn't and you'll waste your money.
There are dismantling links in this forum - but you'll find them on my small Hermes site http://michael-channon.spaces.live.com- go to the loose keyboard section and you'll see the links.
Mike
Click to expand...
Click to collapse
Ok my best bet is to take it to carphone, i got my screen replaced there a few months ago, think i still have a 1 year warrenty
Thanks for all your help anyways
Tytn Service manual
jblandon1024 said:
my 8525 had the same exact problem, and i swapped the LCD and still doess the same thing...
I dont know what the problem could be, and i dont have a warranty.
What could be going on????
Any 1 know where 2 find the service manual????
Jorge
[email protected]
Click to expand...
Click to collapse
Here you can found the manual
http://www.megaupload.com/?d=0GD472TP
Roby
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
hey guys!
i really like you´re forum, it was helping me several times...
now i need you´re help again.
I think you will easily recognize that i have a bad problem with
my hermes - if you look at the attached pics.
The touchscreen is working, the device is booting too and is working nice...
but, uhm, well - i don´t know how to fix the problem shown in the pic.
I´d be really grateful if you can solve my problem.
I don´t know what to do, i just disambled it and cleand everything, i tried an hardreset... the problem´s still there. =(
Regards
We'll see what others think, but looking at picture 3, I'd say your LCD is cracked and the the liquid crystal seeping out a little under te digitizer layer. If I'm correct there is only one practical solution and that is a digitizer LCD combo replacement.
If you replace it be very careful to replace it with the correct one - Hermes had at least three different types and it is essential to get like-for-like.
There is a thread here about the different types.
Mike
One way to check if it's a crack is to place some pressure with your finger along that diagonal line - if you see odd colors moving around in a "liquid" way then it is pretty certainly cracked.
Ouch, i also think that, that is a crack.. Did you drop your device or something.? I think you really need to replace your display..
first of all: thx for the fast responses
i tried what you suggested to check if it´s cracked... unfortunately you´re right
i think a replacement would be too much efford and it also would be too expensive and risky... so i think i gonna buy a new pda... htc of course ;-)
thx to you all
softonic
Hi
i'm Claudio from Italy and my htc display suddenly became black
When i push keys the keyboard light and i hear bip but nothing in diplay.
If i connect to PC i see the files and the SD .
I'm not expert so i ask if there is a solution or i must throw away the HTC.
Thanx very much
You might be able to sell it for parts, got get a new LCD screen
hi,
do you think it's no possible a software problem(virus) ?
Tnx
Claudio
Welcome to forums
To discard that a hard reset should be done, but have in mind if it´s the screen problem that maybe you won´t be able to use it.
Good luck,
It sounds like most likely a flex cable problem. Flex cable and hinge can be purchased on eBay as one unit (the assembly makes separation impossible), however, there is always some danger that problem may be caused by the LCD itself or the mainboard. The only way to diagnose the problem is by process of elimination - to try your board in another working machine and then trying another screen in your device.
OK
I'll try
Thank you
I'm guessing this is your problem =] (oj)
http://forum.xda-developers.com/showthread.php?t=647177&highlight=Win_XP
klawrix said:
Click to expand...
Click to collapse
lol - i new you would like =]
nigma1nz said:
It sounds like most likely a flex cable problem. Flex cable and hinge can be purchased on eBay as one unit (the assembly makes separation impossible), however, there is always some danger that problem may be caused by the LCD itself or the mainboard. The only way to diagnose the problem is by process of elimination - to try your board in another working machine and then trying another screen in your device.
Click to expand...
Click to collapse
Where could i purchase such parts, As i'm thinking of revaming my uni with a new case and screen bits as well as a new battery =]
- i've found a case for the vodaphone version which is sliver, but gives me a full re-kit : Screen case, Keyboard case, + Keyboard.
but tbh i really want a new full black XDA Exec (02) re-kit with the same parts
I know theres other thread about it and I shouldnt post this but I thought we would like more updated tutorial how to do it.
Hey!
(JUST MY STORY, REPAIR GUIDE BELOW)
Just wanted to share my experience with you incase someone is in the same point and trouble I was.
So, my SGS got wet (mainly frontpanel) and the screen didnt work at all after that. I didnt know what to do, if I take it to the repair service, it will cost over 200 euros easily to repair it.
So, I searched some parts from the internet for self-repair. I found LCD screen, and it costed 170 euros. I watched video how to open SGS to the point I could change the LCD screen. It looked so hard I didnt even try it.
Then, I found whole frontpanel for SGS for under 100 euros.
I changed it, and it worked. It was quite easy to change the part.
(the first part I got from the shop was broken, and I returned it, but the second one I ordered worked)
HOWTO DO IT
so, you have a SGS which screen is bricked or not working. Dont worry.
Order this part: http://www.togytech.com/i9000-galaxy-s-full-assembly-lcd.html
Open your SGS to the point 1:20 of this video: http://www.youtube.com/watch?v=plQWs9Yntdg&feature=related
(sorry the video is in russian language but its the best I found)
Change the new part and you are done=)
NOTE: THS IS *NOT* AN ADVERTISING I DONT ADVERTISE ANY SHOP I JUST FOUND A GOOD PART AND I JUST WANTED TO HELP YOU
I broke my i9000 once and I thought the front panel was broken.
But it turns out that the main panel was also broken. So I guess it is not easy to examine the phone ourselves.
TheHorrors said:
I broke my i9000 once and I thought the front panel was broken.
But it turns out that the main panel was also broken. So I guess it is not easy to examine the phone ourselves.
Click to expand...
Click to collapse
sgs is very easy to open, and front panel is easy to change contact me, i will help you
Sent from my GT-I9100 using XDA