Database Users

Keeping Bluetooth Connected?

How do I make my I-Mate JAM stay connected to bluetooth so I can use the passthrough on my PC?
When I first got the phone it would stay connected after ActiveSync sync. But then the BT connection broke for some reason and I couldn't connect my phone to my PC using BT. I've set it up again now, but this time it doesn't stay connected. It connects, syncs, then breaks the connection.
What do I have to do?
Thanks

In the activesync application on your phone go to Tools --> PC --> Options
You will then see a radio button that says When syncing remotely Maintain Connection
Make sure that button is selected and you should be ok.

dgaust said:
In the activesync application on your phone go to Tools --> PC --> Options
You will then see a radio button that says When syncing remotely Maintain Connection
Make sure that button is selected and you should be ok.
Click to expand...
Click to collapse
Thanks, but I have that option on alraedy. :?

If you use Microsoft stack on pc maybe it's the cause of disconnection.
After X min. of inactivity turns off the service.

SkizZO said:
If you use Microsoft stack on pc maybe it's the cause of disconnection.
After X min. of inactivity turns off the service.
Click to expand...
Click to collapse
It seems to disconnect immedietely after ActiveSync has finished.

Wi-fi Problems

I´m using WM6 with radio 1.15 and sometimes the wi-fi connection doesn´t work. I try to make it on, it´s starts but after a few seconds back off again. Only after a Hard Reset back again to work fine.
Anybody can help me?

This is a known problem.
Next time you have this try this -
1 - Goto start > Settings > Connection > Wireless LAN
2 - Click on Turn on WLAN (your WLAN will go on and off again)
3 - Still in the Wireless LAN screen, click on Menu (it's at the left bottom), and select Comm Manager.
4 - Start the WLAN the way it should be done by clicking on the WLAN image button.
With a bit of luck you WLAN will stay on, and starting / stopping it should from now on work by just using the Comm Manager until you do a soft reset again. (When you do a soft reset, you will need to start at point 1 again.)

have same problem,
what i did is settings/WLAN settings/power mode ,then changed power mode to middle and it work no problem

Thanks XdaIIs,
I try this and really works fine.

Terminating data connection automaticly?

How do I setup the HD so, that it disconnects the data connection automaticly when there is no applications open that use it.

You can use HD Tweaks to set "Disconnect GPRS/data after" entry to 1 or 2 minutes.
For wifi, you can set the "Wifi Mode" to make it auto disconnect once the phone goes to sleep.

Thank you for your response, but it's not what I was looking for. I need the connection to be closed right after when there is no applications open that use it. Not after 1 or 2 minutes or after the phone goes to sleep mode.

comm manager and/or WI Fi can't turn off issue-t-mo usa

I went to the C.Manager. I can't get it to work right.
This is what it's set to:
Wireless Connection(Disables all wireless connection): ON
In-Flight Internet(Enable Wi-Fi and Direct push): OFF
Phone(Change phone settings): ON
Bluetooth(Turn on Bluetooth): ON
Wi-Fi (Connect to Wi-Fi Network): ON
MS Direct Push(Retrieve Outlook mail as it arrives): OFF
Data Connection(setup data connection): ON
With it like this, if I do a reset on the HD2, when it reboots, I see a Wi-Fi icon at the top. I click the icon, it says "Multiple Connections Detected", I click on the the wi-fi icon, New window opens titled Wi-Fi. Listed says wifi(Turn on wifi):OFF. Next line says Wi-Fi Networks, which has nothing listed.
I never changed of of the wi-fi stuff till today. I did do ONE regedit, for the Wireless N feature, but I changed it back when I got all these problems. And no, I don't know if I had this issues b4 that one edit change. And yes, I did a soft reset after every reg change.
1) I tried clicking the wi-fi on this screen.button pushes down but nothing happens. I press "X" and close the window
2) I launch Comm Manager. I try clicking the Wireless Connections Icon. It' still says ON. BUT Inflight Internet changes to:ON, and Phone changes to:OFF, Bluetooth changes to:OFF, Data-Connection is greyed out.
I press it again. Busy sign comes up, nothing changes.
3) I press Phone. It switches to:ON. And InFlight Internet changes:OFF
4) I press bluetooth, and it turns: ON
5) I press Wi-Fi and still nothing changes(Still:ON)
6) I press Data connection. It switched to: ON
7) I click In-Flight:OFF, changes to ON, and turns off PHONE.
8) I press InFlight again, nothing happens.
9) I press Phone, and it turns on the phone. and turns OFF the In-flight.
So... Wireless Connections:ON and the Wi-Fi:ON. Neither one does anything when I click it. Both is always GREEN ON.
ALSO
Under Settings-menu-all setting.
I click Connections and selected Wi-Fi.
"Turn on Wi-Fi" says: ON
I can click on it, and it says OFF
If I check Comm Manager, Wi-Fi is still ON and so is Wireless Connections.
I do a reset of the HD2
ANd I still get the wi-fi telling me theres a signal.Nothing changed. And when I go into "Turn wifi on", its checked again.
That little attenna I get after soft reset, only started after the regedit. I never had the wi-fi on b4 now. But I checked and that is reset to show 1.
"39. Speed Up Web Page Loading Considerably
The following registry tweak will enable almost instantaneous web page loading in the web browser. It apparently enables wireless N mode but seems to work with cellular data too. Go to:
HKLM/Comm/BCMSDDHD1/Parms
11nModeDisable = Change from 1 to 0"

Can't turn off wifi either
I have exactly the same problem, will be forced to hard reset, I think. Does anyone have any ideas?

No bluetooth file sharing between HD2's?!?

I was told by someone that had and hd2 that they could not bluetooth to another HD2. Sure enough, I tried it with another HD2 and we never found each other when we did a search. We tried for a half hour. Has anyone heard of this or know a fix (if this is truly the case)?

I had an issue with this also. We had to use multiple passwords on each TP2, it was a real pain, possible-but not easy like with the Hermes(8525). I recently found a reg edit that disables the password, but I have not tried it yet.

My wife and I ran into the same problem during lunch today. I saw this thread and then went looking for the answer.
Here's how you make the phone discoverable to other devices beyond headsets.
Turning Bluetooth on and making your phone visible
Turn Bluetooth on and make your phone visible (discoverable) when you want other Bluetooth-enabled devices to detect and connect with your phone.
1. On the Home screen, slide to the Settings tab, and then tap Menu > All Settings > Bluetooth.
2. When prompted to turn on Bluetooth, tap Yes.
3. Tap the Settings tab ( ), and then tap Not Discoverable.
4. Select Always Visible.
Note If you select Visible for 60 seconds, Bluetooth visibility will turn off automatically when the time elapses and your phone has not yet connected to another Bluetooth device.
5. Tap Done. The icon then appears in the title bar to indicate that your phone is in visible mode.
Tip To easily switch Bluetooth off or back on, tap Wireless controls on the Home Screen’s Settings tab to open the Comm Manager and then tap Bluetooth’s Off/On switch.
Your phone remembers whether visible mode was previously enabled or disabled. If you did not disable visible mode, switching Bluetooth on in the Comm Manager also puts your phone in visible mode automatically. For more information about using the Comm Manager, see Chapter 14.
Click to expand...
Click to collapse
I got this from the manual for the HD2 on page 209. I downloaded it from tmobile.com in the mytmobile section under support. I would attach it but the file is too large.

^^ yep its that easy been transfering files from the laptop to the phone...so easy