Hello,
Like other members of this forum, after i flashed a cooked rom, my WLAN stopped working. Is completely dead and nothing can be donnne solve the problem, by the usual ways.
I know that in this forum can be found a method to solve this problem but that solution is only design to apply on the HERMS. Is there a solution to put working de WLAN on the Polaris?
Now, I’ve installed again the original ROM (WM 6.1) and restored de original SPL, but the WLAN doesn’t work. Please somebody can help me?
Thanks
JF
You could try flashing another radio ROM version.
Just a thought.
After the installation of the Original Rom ended, did you Hard Reset the unit.
This sometimes solves some of the problems. Even if you think the unit did a Hard Rest after the flashing - do another one.
Hope it helped you.
if you flashed the original rom, you should've gotten the original radio with it.
did you flash the EXACT rom you had in the first place? or another, updated original rom?
Nir36 is rite. If the original one that u flashed back is the same as one u used b4 the WLAN stopped working, then by some unluck you have a hard ware problem. My suggestion would be re-dowload the original same rom as b4, re-flash and then hard reset. If it dont work, its erm... ****ed! sorry dude
just change the wifi power saving options to full power and it will work again. i had to do that everytime i falshed a rom...
Related
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
some help would be appriciated
jasonchiu said:
Hi all,
I recently took out my sim card to replace it with a new one. However, when i placed the new one in and turned the BA on i recieved no signal, furthermore, when i put the passcode in, it said it was wrong. of course, I have punched in the right code i have always been using.
i have tired hard reseting but it still doesnt work.
Are there any other options avaliable apart from flashing a rom in again?
Any help or suggestion will be appriciated.
Kind regards,
Jason
Click to expand...
Click to collapse
These are both known glitches in the BA with WM6
For the no signal a soft-reset should fix it, for some reason if you remove the battery and then replace, the first boot has no radio initialization, but a soft-reset after that fixes it.
As for the passcode, you have to clean your hive file to regain access to the device. You do not need to format storage, but all your registry settings for installed software will be gone. Most likely a re-install of each app will be needed.
i just went through this..i tried changing my sim card and i was freaked when i saw no radio rom installed..then i upgraded to radio 1.15 and first it worked but again i t showed the same so i went into bootloader an then soft-reset and its working till then ( about 5 softresets till now)
cheers guys, will try that out.
Hi there, I flashed \duttys and Miris roms but no I get no service.
I had a stock rom and installed the new radio and I aslo flashed the new radio, can anyone help?
momagic said:
Hi there, I flashed \duttys and Miris roms but no I get no service.
I had a stock rom and installed the new radio and I aslo flashed the new radio, can anyone help?
Click to expand...
Click to collapse
No service as in no signal or no service as in phone/dialler cannot ring anyone similar to flight mode? When phone starts up do you get a greenish distortion which is fixed by simply pressing power on/off button?
Moved out of dev
i also had this prob after flasing to duttys, no service and the strange scrambled colours that can be fixed by pressing the on and off switch, havnt tryed re flashing again yet though
take a look at your phone settings. open your dialer, go to menu/options now select the band tab. make sure it is set to you providers band or set it to auto.
Me too after flashing Dutty's latest.
Hard reset doesn't help.
"Connection settings" app doesn't appear to run after flashing...
Not a signal issue.
Can't start phone...
Any ideas please?
pickie said:
i also had this prob after flasing to duttys, no service and the strange scrambled colours that can be fixed by pressing the on and off switch, havnt tryed re flashing again yet though
Click to expand...
Click to collapse
If you are experiencing the scrambled colours it means you have not followed correct procedure to flash Duttys rom. Duttys rom is based on 1.56 or 1.57 depending on which version i.e. V3.4 etc so you'll need to put USPL or HSPL onto your device first and then flash a HTC 1.56 based rom
All this and proper procedure can be found in cRaCKwHoRe's guide to flashing 1.56+ based roms. Can be found in my signature
I sent my device on repair, also after constant flashing of ROMS (doesnt mean duttys fault) but the device constantly droped calls on 3G or GMS.. I called them today, they reflashed original ROM and tested the phone few days, no phone drops anymore..
They will test it few more days, hopefully my prob. will be fixed.
double post plesase delete.
Helo
I have a major problem with my pda i had bought it a couple a days ago
chnaged the rom etc but now when i try to conect to any wifi acses point it
conects and disconects all the time tried every thing form hard resets changing roms radio roms nothing worked for me any solution or did any one have the same problem.
Sry for the speling eng isnt my native language.
Adrian
Have you tried to flash back to the original ROM to see if you have the same problem?
-MyHTC- said:
Have you tried to flash back to the original ROM to see if you have the same problem?
Click to expand...
Click to collapse
I have intsaled a chinaes repair rom and then installed the rom i was using and went to school when i was the ei tried to connect to one of the hot spots there and the connection was successful didn't disconnect or anything.
But when i came back to my home it all fuxed up again i think it has something to do with the wifi channel im operating on the pda couse i read that sometimes
same chanles interrupt themselves and couses disconnects but dunno how to fix it.
hello guys, I have a HTC Touch HD and I have a problem with wifi networks .. I flashed the 'hardspl 1:56 el' axlor 6.1 as in the guide, but I'm not the most research of networks (not see any network) I tried to put all the radios, but nothing ... not even manually entering the keys wpa or freeing up the network I can not connect ... I tried to restore everything, but the problem persists ... can anyone give me a hand?
i have the same issue !!!!!! any one help please
My wifi connects to networks but the phone doesn`t browse the internet.I`m sure it has something to do with some setings but I don`t know what.Can anyone help?
without further information it is impossible to help you. what kind of network is it, how is it encrypted? what rom/radio rom are you running? is it your private network? do you have the key for it? what are your settings that you suspect of making it not work for you?
It`s a student public network on my faculty.It`s open for everyone to use.And they use it without any "encription" or password.
Bought my phone used.I guess it was all set to work, but I installed some rubish I couldn`t delete...rest of it you can predict.
I returned my phone to factory setings, and since then wifi doesn`t work.Everything else works.
OS 5.2.21855(21855.5.0.85)
manila version 2.5.19211619.0
Radio version 1.09.25.14
Thank you very much in advance!
ok, that is something to work with. your rom is not a shipped one, and from the version number, i can't tell, who cooked it and how old it is. however, it might be a common bug of that rom that wi-fi doesn't work properly. also, your radio is fairly uncommon, most people these days use the latest radio 1.17.29, which can be found on the forum. remember to perform a hard reset after flashing another rom or radio rom. in general, one can assume, that, once you flashed a shipped rom and the latest radio, the software on the phone is as it should be, and if wi-fi doesn't work then, it might actually be physically broken.
After installing OliSPL, new radio and custom rom (Energy or BlackStone) I lost all wifi connectivity (cant detect any wifi networks, unsecured or secured) and BT can't detect any devices either.
I tried going back to Original HTC Rom with no luck, the problem still remains.
Can anyone please help me figure out what the problem is. If you need any other info please ask as I have no idea what to include here.
Thank you!
if the only problems are wi-fi and bluetooth and those things are not explicitly declared as bugs in your rom (don't bother, they're not), then it is the radio rom, that causes these problems. have you performed at least one or two hard resets after flashing? did you restore any kind of backup afterwards?
have you tried another radio version? what is your current radio?