Is there some way to re-install tf3d or remove it?
When I put tf3d to my today screen it only say..
Launching TouchFLO 3D
Tap here to launch TouchFLO 3D
And when I tap it, it's starts to again say "Launching TouchFLO 3D" and so on..
It wont even work in panel. Help!
If I do hard rest will it remove it?
Go to Today screen, uncheck it.
Switch to other panels.
Then go and remove the program.
I have done that. Then I go try to remove it,
takes ages to remove and it get stuck in some point and I have to do soft rest,
when I get my x1 alive again tf3d hadn't gone nowhere..
axjiii said:
I have done that. Then I go try to remove it,
takes ages to remove and it get stuck in some point and I have to do soft rest,
when I get my x1 alive again tf3d hadn't gone nowhere..
Click to expand...
Click to collapse
did you try leaving the uninstall on going for more than 10 minutes?
some of those "htc ported" apps took long times to install / uninstall
cursor said:
did you try leaving the uninstall on going for more than 10 minutes?
Click to expand...
Click to collapse
yup, more than 10min, probably something like 45min,
maybe even more.
I could uninstall TF3D .. but not install it again. It leaves a lot registry entries and files. If you want to get rid of it for good, do hard reset.
Related
Is there a way to manually start the TF3D? Sometimes it takes up to 5 resets to start. Really annoying, since I don't want to hard reset the device...
Hmmm, should start every time if you have it in the today settings.
Check: Start - Settings - Today - Items (bottom of screen) - scroll down to TouchFLO 3D and make sure it is checked. Best to uncheck everything else as TF3D generally conflicts with other today plugins.
Cheesy Dave said:
Hmmm, should start every time if you have it in the today settings.
Check: Start - Settings - Today - Items (bottom of screen) - scroll down to TouchFLO 3D and make sure it is checked. Best to uncheck everything else as TF3D generally conflicts with other today plugins.
Click to expand...
Click to collapse
Yes, it's there and checked. Nothing else is checked and I have no other today plugins installed.
jouh said:
Yes, it's there and checked. Nothing else is checked and I have no other today plugins installed.
Click to expand...
Click to collapse
Hmmm ! Sounds like maybe a manila file is messed up. I guess your best bet is a hard reset.
Alternatively you might try installing a TF3D theme from the forums and see if that fixes it.
Sorry, I can't help much more than that (I've never experienced this problem).
Cheesy Dave said:
Hmmm ! Sounds like maybe a manila file is messed up. I guess your best bet is a hard reset.
Alternatively you might try installing a TF3D theme from the forums and see if that fixes it.
Sorry, I can't help much more than that (I've never experienced this problem).
Click to expand...
Click to collapse
Thank you for taking time and trying to help me!
Perhaps a hard reset would be in place...
Hay all,
I've run in to a strange problem.
I had a theme installed on my phone but when I went to unistall it, it came up with a message saying "some parts went uninstalled"
I then installed a new theme but for some reason it's all messed up. Theres a mix of new & old icons from each theme, when I change screens the old themes wallpapers still there.
The touch flo bar when overthe top of an icon the new icons doesnt go transparant.
The old these is still in the programs list but comes up with the same message as above everytime I try to uninstall it.
How do I fix this?
Many Thanks
Leigh
I'm sure a hard reset would fix itas a last resort. I look at hr as an opportunity to try a new rom.Lol . Makes it lots easier to take.
cbreze said:
I'm sure a hard reset would fix itas a last resort. I look at hr as an opportunity to try a new rom.Lol . Makes it lots easier to take.
Click to expand...
Click to collapse
Had to hard reset. The touchflo wouldnt even work lol
Sorted now tho...just gotta re-install everything now lol
I am getting reasonable results from trying to run both Sense and SPB Shell but it still hangs every now and then and I was wondering which file/program actually launched Sense off... I ask as if I could have it as a short cut, it would make my life with my current setup, easier..
TIA.
If you're asking how to turn Sense off, just remove it as a item in the Home settings. Push the Windows button at the bottom of the phone, Settings, Home, under Items, uncheck HTC Sense.
NO... I was asking how to turn it back on.. Sometimes when I try to toggle between SPB Shell and HTC Sense it gets stuck and the only way to get things going is a reset, so I was wondering which file set HTC Sense off so I program a shortcut to save me the hassle of a reset each time.. cheers.
Have a look:
http://forum.ppcgeeks.com/showpost.php?p=1406960&postcount=18
Daniel
EFMax said:
NO... I was asking how to turn it back on.. Sometimes when I try to toggle between SPB Shell and HTC Sense it gets stuck and the only way to get things going is a reset, so I was wondering which file set HTC Sense off so I program a shortcut to save me the hassle of a reset each time.. cheers.
Click to expand...
Click to collapse
I cant remember where I found it on here, but there is a TOUCHFLO3D to SPB Mobile Shell CAB file somewhere. The icon it installs allows you to switch between the two interfaces seamlessly. This icon can be added as a shortcut from both interfaces.
Danielfr said:
Have a look:
http://forum.ppcgeeks.com/showpost.php?p=1406960&postcount=18
Daniel
Click to expand...
Click to collapse
Thank you. I shall save that one and try it. I was using the cab "Second Today" and it seems as if the problem was in my "short-sightedness" in following all the instructions carefully. Cheers..
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
calsi said:
Hey Guys,
I have an HTC Touch Pro 2 and everything was working fine and all of a sudden I lost the TF3D interface and am now back to the Win MO 6.1 interface. I did a soft reset several times with no luck.
Is there any way of getting it back without doing a hard reset. Would appreciate help on this one.
Thanks
Click to expand...
Click to collapse
Open your start menu, select "settings". On the first tab, choose "Today"
On the next screen, choose the "items" tab, and then you'll see a checkbox in the list for TouchFLO 3D, just check that, then hit "ok" to exit. When you return to the home screen, you should have TF3D back.
This is the method to turn TF3D on/off when you're doing things like installing cabs that change the look of TF3D in any way.
Touch FLO 3D Back again
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
calsi said:
Sirphunkee,
Hey, I followed your instructions and my TF3D is back again. Man you saved me because I was considering a hard reset. By the way I did install new cabs for the Home screen.
Thanks a million.
P.S. I had seen that screen once before but never had any need to use. I won't forget this one again.
Click to expand...
Click to collapse
Glad to help!
Yes, any time you run cabs that change the appearance at all, it's always a good idea to turn TF3D off first, just to make sure there's no issue with the cab accessing files etc that it needs to modify.
I install the cookies cab and cannot get home screen back to normal all my icons comes up in start menu . i dont have to homescreen anymore. restart numerous times and nothing. i uninstall the apps and restart but nothing. am im missing something. please help! thxs in advance.....
try settings->personal->today and enable sense
if i do master reset will that work?
i tried to do set windows as default for home screen and reset phone be did not fix the issue. am i missing a step?
any ideas!!! cannot get my homescreen back to normal...
can someone help..cannot get home screen back to normal.
lilsir said:
i tried to do set windows as default for home screen and reset phone be did not fix the issue. am i missing a step?
Click to expand...
Click to collapse
dont set windows as default , set HTC Sence as default
i set as HTC SENSE as default and reset phone. nothing still the same issue.
same recieve the same issue. nothing happen.
try installing cookies home tab again, if that doesnt work there is always possible to hard-reset
se1988 said:
try installing cookies home tab again, if that doesnt work there is always possible to hard-reset
Click to expand...
Click to collapse
How about configuring CHT to look like the stock home screen? Eg, set only one screen for 9 quicklinks can be configured I think...
In my experience, uninstalling CHT stops Sense from loading. Never an issue for me though as I am upgrading CHT when I do this.
Try read Troubleshooting: at [Manila Mod][19-Jun-2010] Co0kie's Home Tab v1.8.5
Q: After uninstaling CHT, sense doesn't work, or it works but the home menu doesn't come up.
A: Copy \windows\home_pages.xml to \windows\manilaxml\home_pages.xml (overwrite existing file). Then delete \windows\manilafull.xml and soft reset.
Tested and worked