Related
hi there......
was just surfing the net and found out this software www.logmein.com all you need to do is register over here and download a software on the pc you wanna access and just install it.....after the installation is complete u can either access your computer from a pda from ne where or you can access it from ne other computer......
Conditions Apply :
the computer you wanna access shud be turned on and logmein software shud be running.
the computer you wanna access shud be connected to the internet.
this is how you can connect to your computer from your pda.
is this safe?
I used to use https://www.gotomypc.com/ a couple of years ago with my original XDA when I was away from the office. It did the job, but it's a bit tedius on a small screen. If you logged in from another PC it was great and I used it daily.
safe as eva it can get becaz u cannot do ne **** if u dun haf the admin username and password for tht windows machine(homepc)
You just have to trust the software.
I don't know these companies, and I'm sure they are all legit. But a bad one could simply send the ip-address, userid and password to a logging machine.
I wonder how do these programs compare to the latest version of PC Anywhere? I think PCAnywhere has a client for the Pocket PC and the plus is that you don't need to pay monthly subscription and that your data is totally safe as it's being tunneled directly to you bypassing any server. Plus Norton seem to have more resources than small companies. I also wonder how does this compare to Terminal Server Client.. Anyone?
yeah i did hear bout pcanywhere neva used it......but i heard tht its good n very stable software.....dunno whether its for free or u need to purchase it n stuff....n as far as pcanywhere hafin a client for ppc tht must be something good n worth looookin at !!
Remote Control
pcAnywhere is not free, but it does work well. You should look at VNC or RealVNC. It's free, and there is a client included in the SE ROM. There is some tweaking necessary for your firewall (if you're running one). I think the ports are tcp/udp on 5800 and 5900, but you should check the included documentation. Both client and server software can be found here: http://realvnc.com/
Terminal services is probably the best over narrow bandwidths like GPRS since it only sends the windows drawing commands to redraw the screen but you need either XP Pro or Windows server to run the server version of the program. I use VNC because I only have Win2k on my laptop - it's slow with screen updates.
VNC for 2003SE/Intel PXA: WHERE to download it??
Regarding VNC client for Qtek 9090, I miss something
(maybe because it is friday and I am getting tired) :? .
Where is it possible to find a VNC client for Qtek 9090?
If I understand well, to run it on a Qtek it has to be:
- either a Win Mobile 2003SE for Intel PXA program, or
- a Java program
Is that true?
And if it is, where can I find one, I don't find anything similar
on the http://www.realvnc.com/download.html .
Thanks,
Anton
any windows CE program will run
on xda's
there are many versions well 3 that i've seen of vnc clients for
windows ce / pda's with pocketpc now windows mobile on them
I did a google search, here's a link:
http://www.pocketpccity.com/software/pocketpc/VNC-Viewer-for-PocketPC-2001-1-2-ce-pocketpc.html
If you are running a v4 VNC server make sure it's in v3 compatibility mode since there is only a v3 PPC client available
Mark, thanks for pointing me to a link with a VNC client!
>any windows CE program will run
>on XDA's
Rudegar, regarding the HW platform, I still think that you have to
have a version compiled for your HW.
:!: However, in the meantime I found the answer at Intel's page
ftp://download.intel.com/design/pca/prodbref/251671-002.pdf
-->
Qtek 9090s (XDAs, and similar) have the PXA263 processor that is based
on Intel XScale technology, and these have the ARM* v.5TE ISA
compliant instruction set.
So a program for ARM will be the right one.
Anton
My phone is really like a small computer (HTC Advantage x7510) and I would really like to be able to connect it to my company's corporate VPN. A typical windows/mac/linux client connects with Cisco's AnyConnect software, and while Cisco released a version of AnyConnect with the iPhone, they didn't for Windows Mobile 6.1. The problem as I understand it is that Windows Mobile natively supports PPTP and L2TP/IPSec connections while the Cisco implementation wants pure IPSec. The authentication scheme that we use is certificate based and then user/pass based. I created a user certificate on my desktop and then exported it to a .pfx (PKCS #12 Container) file and then imported it on my mobile device.
I have tried The Green Bow, but I have been unable to get this to work... The app seems rather buggy and I can't even save off the log properly to find out why it isn't working.
http://www.thegreenbow.com/mobile.html
Bluefire seemed like it would do the trick, but after I tell it what Certificate to use and click Finish, it tosses out an error: "An internal error has occurred while processing your request. Please contact the system administrator". It appears that Bluefire Security has disappeared, at least from the web.
Anatha VPN seemed like it would be an option, however the UI seems buggy because I can't get the dropdowns to work in the configuration (using any DPI setting in realvga). Either the Gateway dropdown or the Gateway Type dropdown do not work... it varies.
http://www.anthasoft.com/anthavpn-virtual-private-network.php
Does anyone have a solution? Free or commercial... doesn't matter.
Latest version of NCP VPN works very very well for Cisco IPSec, you can download a trial version which is valid for a few days. not buggy, but commercial....
http://www.ncp-e.com/en.html
padanfain said:
My phone is really like a small computer (HTC Advantage x7510) and I would really like to be able to connect it to my company's corporate VPN. A typical windows/mac/linux client connects with Cisco's AnyConnect software, and while Cisco released a version of AnyConnect with the iPhone, they didn't for Windows Mobile 6.1. The problem as I understand it is that Windows Mobile natively supports PPTP and L2TP/IPSec connections while the Cisco implementation wants pure IPSec. The authentication scheme that we use is certificate based and then user/pass based. I created a user certificate on my desktop and then exported it to a .pfx (PKCS #12 Container) file and then imported it on my mobile device.
I have tried The Green Bow, but I have been unable to get this to work... The app seems rather buggy and I can't even save off the log properly to find out why it isn't working.
http://www.thegreenbow.com/mobile.html
Bluefire seemed like it would do the trick, but after I tell it what Certificate to use and click Finish, it tosses out an error: "An internal error has occurred while processing your request. Please contact the system administrator". It appears that Bluefire Security has disappeared, at least from the web.
Anatha VPN seemed like it would be an option, however the UI seems buggy because I can't get the dropdowns to work in the configuration (using any DPI setting in realvga). Either the Gateway dropdown or the Gateway Type dropdown do not work... it varies.
http://www.anthasoft.com/anthavpn-virtual-private-network.php
Does anyone have a solution? Free or commercial... doesn't matter.
Click to expand...
Click to collapse
I am not sure who told you there wasn't a Windows Mobile version of the Cisco AnyConnect VPN Client because there is. There are Windows versions, Intel & PowerPC Mac OS X versions, Linux versions and Windows Mobile 5/6 versions available. I can't however see an iPhone version.
The current version for all platforms is 2.3.0254. The release notes are here:
http://www.cisco.com/en/US/docs/sec...nyconnect23/release/notes/anyconnect23rn.html
Andy
AnyConnect VPN Client is available for WM Pro, but it does not support IPSec...
The Anyconnect from Cisco doesnt work with the concentrators.
tenser234 said:
The Anyconnect from Cisco doesnt work with the concentrators.
Click to expand...
Click to collapse
No it doesn't. The 3000 series concentrators have been EOL for a while. The AnyConnect client is for use with IOS Routers and ASA Firewalls (plus the PIX but this is EOL as well). You can use the native L2TP/IPSec client in WM5/6 with the 3000 Concentrator though (as you can with IOS & the ASA).
Andy
We have a trial mobile agent setup and I have anyconnect installed and configured on my phone. I am able to establish a VPN over HSPDA and I can hit internal web pages via IE, but I am unable to RDP or SSH anywhere. Is anyone using anyconnect and able to do these things?
padanfain said:
We have a trial mobile agent setup and I have anyconnect installed and configured on my phone. I am able to establish a VPN over HSPDA and I can hit internal web pages via IE, but I am unable to RDP or SSH anywhere. Is anyone using anyconnect and able to do these things?
Click to expand...
Click to collapse
I know this is really old, but I was looking for some ipsec stuff for home. However I do use AnyConnect for SSL work vpn and I can RDP and SSH just fine.
The AnyConnect SSL Mobile client works great with the ASA 5500's. Does anyone know what it takes to fool the router into thinking a mobile device is not VPN'ing in? You need a Windows Mobile AnyConnect license installed to make the Windows Mobile client connect. We do not own any at the moment and I'm eager to see it work.
Ok I've got my ASA 5510 working perfectly using Windows Mobile and Bluefire IPSec vpn. We normally run SSL Vpn but keep Ipsec open for site to site VPN as well as mobile VPN. I got a quote on Cisco SSL AnyConnect mobile licenses on the firewall and they are $100 a pop. But if you're looking for a great IpSec client that works go with Bluefire...
HI to all
I am looking for a working VPN Client (the Iphone has one which is working) to connect my Touch Cruise to the intranet of my firm.
I read that NCP has one, but it is quite expensive ...
is there any other solucion?
For free?
Shrew is working fine on my laptop, but y would like to check something out of mi WinMo Polaris.
I actually am using WinMo 6.1 but if necessary I also could change to 6.5
Thanks
Isidar
OpenVPN has a free client for WinMo but I don't know if it will work for your VPN, give it a shot.
you can use hamachi-0.0.3.1
http://rapidshare.com/files/83751409/hamachi-0.0.3.1.rar (for your mobile)
https://secure.logmein.com/products/hamachi/list.asp (for your pc)
clmbngbkng said:
OpenVPN has a free client for WinMo but I don't know if it will work for your VPN, give it a shot.
Click to expand...
Click to collapse
i think openvpn is not compatible with cisco vpn since cisco uses ipsec and openvpn uses a simply tunnel created on udp port 1194 (no need for gre,ike,or pptp port's/protocols open).
it's much simpier but work very well and just with the p12 certificate (ok my certificate is 2048bit so i think it is minimally secure, nothing like a dynamic generated rsa key but even better than just a ssh tunnel or something like).
Back in the days of Windows Mobile 2003 I used to use "MovianVPN" to connect to my university network. The software is now superseded by AnthaVPN (www.anthasoft.com). It is designed for Windows Mobile 5 and they have no mention of WM6 compatibility, but I think its worth a shot.
I also read about another product called "Bluefire VPN", but I can't seem to find it online at the moment.
Edit: The above solutions are not free, but the price might be refundable by your company.
Cisco AnyConnect for Pocket PC
There is an application from Cisco itself that you can download and try.
It's based an Cisco's new Anyconnect module
anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
http://cisco.quanza.net/anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
The website http://www.tycoon.mxm.cx/ has a couple of VPN software apps for all OS
Shawn Botha said:
There is an application from Cisco itself that you can download and try.
It's based an Cisco's new Anyconnect module
anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
http://cisco.quanza.net/anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
The website http://www.tycoon.mxm.cx/ has a couple of VPN software apps for all OS
Click to expand...
Click to collapse
The Cisco device at the other end has to be setup for SSL VPN otherwise Anyconnect does not work. This is somewhat new and SSL VPN licenses are expensive.
Personally I use AnthaVPN on my HTC Touch (WinMo 6.1 Pro) and it works great with our IPSec Cisco VPN (the old way since we're too cheap to buy the licenses for the SSL VPN).
EDIT: And if your company is setup for SSL VPN, you should not need to download a client. Your admin should give you a website and it connects to the router/firewall/VPN concentrator and downloads the proper client for you. Better than going to some random site to download something.
The integrated L2TP/IPSec client?
I have posted previously on here about VPN clients and Cisco Routers & Firewalls. The integrated L2TP/IPSec client works with both Cisco PIX/ASA Firewalls as well as IOS Routers - it is dependant on how these are configured though. I posted two configurations from PIX 6.3(5) and PIX 7.2(4) - both of which I had working. It seems there are some limitations when setting up groups however my testing didn't include this.
http://forum.xda-developers.com/showthread.php?t=444948&highlight=Cisco
I was going to test the Group issues someone reported but never got around to it - I have a full-time job as well
Andy
Shawn Botha said:
There is an application from Cisco itself that you can download and try.
It's based an Cisco's new Anyconnect module
anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
http://cisco.quanza.net/anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
The website http://www.tycoon.mxm.cx/ has a couple of VPN software apps for all OS
Click to expand...
Click to collapse
Cisco nice good work,try it with my Dopod and router working.
thank you guys to put the links.
AnyConnect Secure Mobility Client 2.5
Hi guys
Could anyone post the link for Cisco AnyConnect Secure Mobility Client 2.5 as it is one of the only vpn client solutions having WM6.5 and Cisco routers work together
Could you propose any other solution for WM6.5 and Group authentication cisco servers
Thanks
I have just downloaded the AnyConnect Secure Mobility Client, v2.5 and it works a treat thanks for this post, it was released in Aug and works with 6.5
Please note, i legally have a CCO account and valid service contracts for Cisco ASA and VPN gateways.
To the previous poster, please buy relevant CCO access to download.
Hello everybody, first of all sorry for my bad english!
I am thinking to buy an hd2, but i have a question.
At my work place, there is a WiFi network protected by Cisco VPN with a certificate and user-password autentication.
I would to connect with my hd2 with this network.
In Cisco VPN integrated in WM6.5 or i have to install a dedicated software? in this case, the software is free or i have tu buy it?
Another question: is WM6.5 multilanguage (localized in italian in particular) or only in english? If it is only in english is not a big problem, but, well if WM is localized in italian is better for me.
Thanks for reads and answers.
gmrfcb
I don't think there is a built-in support for Cisco VPN client in WM. There isn't one even in "classic" windows. Only operating system that has built-in support for Cisco VPN client is MacOS X from version 10.6
I really spent more than 10 nights on that desperately trying to figure out how to make it work with SecurID RSA and Cisco VPN groupname authentication... Still nothing helped.
Why on earth did you lose that much time? When there is no built-in support in "regular" Windows for that, why would it be in WM?
Highl1 said:
Why on earth did you lose that much time? When there is no built-in support in "regular" Windows for that, why would it be in WM?
Click to expand...
Click to collapse
Ever heard of 3rd party softwares ?
gmrfcb said:
Hello everybody, first of all sorry for my bad english!
I am thinking to buy an hd2, but i have a question.
At my work place, there is a WiFi network protected by Cisco VPN with a certificate and user-password autentication.
I would to connect with my hd2 with this network.
In Cisco VPN integrated in WM6.5 or i have to install a dedicated software? in this case, the software is free or i have tu buy it?
Another question: is WM6.5 multilanguage (localized in italian in particular) or only in english? If it is only in english is not a big problem, but, well if WM is localized in italian is better for me.
Thanks for reads and answers.
gmrfcb
Click to expand...
Click to collapse
If you are talking about Wifi by Cisco AP, it has nothing to do with VPN. The way enterprise authenticate user by Cisco AP is normally thru EAP-Fast which doesn't support by WM by default. If that's the case, install Juniper Odyssey for WM (not free but you can try it for 30 days) should solve your problem.
Xeon said:
Ever heard of 3rd party softwares ?
Click to expand...
Click to collapse
mate, there is no 64bit version of Cisco VPN Client for Vista and Windows 7, and you expect it to be for WM?
Highl1 said:
mate, there is no 64bit version of Cisco VPN Client for Vista and Windows 7, and you expect it to be for WM?
Click to expand...
Click to collapse
AnthaVPN...
But it doesn't work for me as we use groupname authentication at work and this is not supported with AnthaVPN...
I know, Verizon VZAM also supports it, but some parts
AnthaVPN or bluefire
I can connect to my office VPN (Cisco contentrator) with Bluefire VPN.
Some time ago I tried also AnthaVPN with success.
I had to make some (many..) experiments before the success.
patomas said:
I can connect to my office VPN (Cisco contentrator) with Bluefire VPN.
Some time ago I tried also AnthaVPN with success.
I had to make some (many..) experiments before the success.
Click to expand...
Click to collapse
Does you Cisco vpn concentrator uses groupname auth. ?
patomas said:
I can connect to my office VPN (Cisco contentrator) with Bluefire VPN.
.
Click to expand...
Click to collapse
same here, works great. is the only one that works
Xeon said:
Does you Cisco vpn concentrator uses groupname auth. ?
Click to expand...
Click to collapse
for groupname auth you need to have root CA certificate installed on your computer/device
if the CA is Microsoft Active Directory Certificate Services, then try to export the root CA from the web interface (it's usually http://computername/certsrv), and to install it on WM
Cisco Anyconnect
Cisco Anyconnect works with Windows Mobile / Vista (x64) / Windows 7 (x64). However requires additional licenses for ASA / Cisco Firewall.
MB
WinCE client for AnyConnect works with WM? Didn't know that
Btw you don't need additional license for ASA afaik, you just need ASD 6.x and ASA 8.x
Hello folks,
Does anyone know of any Tor Anonymity Network implementations for Windows Mobile that would work on our lovely Rhodium? It would be great if we had a Tor client for Windows Mobile which would allow anonymous browsing and such (http://en.wikipedia.org/wiki/Tor_(anonymity_network))
Any ideas? Please share
This would be great. Anyone have any apps for that?