my HD used to mute as i flipped the phone over while it was ringing. but after installing HD tweak and no matter how i change the settings that is not happening. any ideas.
I would try the following:
uninstall tweak -> reboot -> see if it works -> re-install -> reboot -> change setting if necessary (dont forget to reboot)
thanks will do and let u know how that goes. 1 more thing though, didnt quite get what "increase sound" item 3.4 actually did, i couldnt see a difference.
it worked thanks
I have the same problem.
If I uninstall TweakHD, do the tweaks I did in TweakHDgo back to default or what?
Do I have to manually set them to default?
Thanks
well i just tried it, u have to change them back to default before uninstalling.
Thanks Zesper.
zesper said:
thanks will do and let u know how that goes. 1 more thing though, didnt quite get what "increase sound" item 3.4 actually did, i couldnt see a difference.
Click to expand...
Click to collapse
Glad it worked. As for 3.4; the volume on the THD can normally be changed separately for ring and system and as I understand it 3.4 handles the volume boost on the system side...
Zesper, how did u get it to work? It didnt for me!
i just followed what rhtizzy said.
Doesnt work for me.
I tried restoring to defaults - uninstalling - rebooting - checked it (dint work) - reinstalled - rebooted - still dint work.
Related
I was adjusting my e-mail settings when the phone frooze. Had to remove battery to restart.
But after that I got stuck with this lockscreen.
Softreset didden't work. Tryed to switch between windows standard and windows classic lockscreen but nothing.
How do I get "The Slider" back?
(I have no lockscreen mods installed)
//Johan
CrustySWE said:
I was adjusting my e-mail settings when the phone frooze. Had to remove battery to restart.
But after that I got stuck with this lockscreen.
Softreset didden't work. Tryed to switch between windows standard and windows classic lockscreen but nothing.
How do I get "The Slider" back?
(I have no lockscreen mods installed)
//Johan
Click to expand...
Click to collapse
Go to the settings tab, Menu, All Settings, Lock and go to the Display tab. Make sure you've got Windows Default selected, not Windows Classic. Click OK and it'll ask you to restard. You should now have the lockscreen you want back.
Hope this helps
Edit:
Sorry - I just noticed your device isn't in English. I hope you can translate my instruction on your device okay.
Sorry, I guess "Standard Windows" is Swedish for "Default Windows" so i have already tryed that.
I have also tryed it with HTC sense off but still no change.
Still in need of help!
//Johan
CrustySWE said:
Sorry, I guess "Standard Windows" is Swedish for "Default Windows" so i have already tryed that.
I have also tryed it with HTC sense off but still no change.
Still in need of help!
//Johan
Click to expand...
Click to collapse
Okay - sorry mate. That's me done then.
Thank's for trying!
So what do you think, will a hard reset do the trick?
//Johan
CrustySWE said:
Thank's for trying!
So what do you think, will a hard reset do the trick?
//Johan
Click to expand...
Click to collapse
I reckon that would do it, yeah, but it seems overkill doesn't it. I'd hang fire for now and see if anyone on here comes up with a better solution. At least the phone is locking! It could be worse.
johncmolyneux said:
Go to the settings tab, Menu, All Settings, Lock and go to the Display tab. Make sure you've got Windows Default selected, not Windows Classic. Click OK and it'll ask you to restard. You should now have the lockscreen you want back.
Hope this helps
Edit:
Sorry - I just noticed your device isn't in English. I hope you can translate my instruction on your device okay.
Click to expand...
Click to collapse
when i sekect lock from all settings, theres only setting password and hint. nothing else. my lockscreen wont automatic lock wen my screen is off.
I found that after a soft reset my Lock screen would not appear after the phone had gone to sleep (or I'd turned the screen off manually).
I solve it by .......
After a soft re-set or having turned the phone off;
go to Start
press 'Lock' at the bottom left of the screen
The lock screen now appears and then acts normally - until the next soft reset when I simply repeat the above
Nop!
Allready tryed that, still the grey lockscreen...
//Johan
Lost Screen lock
Here is the one simple solution that works for me:
When I installed some cab. files I have lost the screen lock.
Longpress the end/power button. this will bring out options to power off, Lock device, set vibrate...
Simply press "Lock device".
Now you have a screen lock that keeps working.
Well I've tryed that but It will still use that grey thing...
//Johan
Some people don't really read that well, do they?
argh
i have to always manually set the lock device. it wont automatically do it.
i recently installed pocketshield and that messed it up so i dont think everyone deleted properly?
should i use SKTools or a software to delete unused registries? or is it cab files?
YEEEES!
I figured somehow the default windows lockscreen file must have got corrupted...?
So I installed this cab:
http://forum.xda-developers.com/attachment.php?attachmentid=269614&d=1263891574
found in this tread:
http://forum.xda-developers.com/showthread.php?t=618989
As a last attempt before a hard reset. And thank god it did the trick!
Thank you all for your help, without this forum my HTC would have ended up in the bin the day after I bought it!
//Johan
still didnt work. just still acting the same.
i have the same problem after i have installed puremind's 1cab4all_20shcutsv1.3No.Net3.5.
i tried the above suggestion but didnt work, i have to put the lock device to make it work, but i dont want to enter the password everytime to go to homescreen.
Anyone have the same problem?
1. This happens a few times on my HD2, make sure you have BSB Tweak installed. There is an AutoLock switch on there. Make sure that is set to On (which it will be default).
2. Then on the odd occasion when the device does not lock, hold the power button to get the Quick List and click Lock Device, now it will be ok - till the next time it happens (mine usually after a few days in which case repeat step 2).
I guess this could go in the Apps and Themes forum but I thought I'd stick it here in case the issue is broader than me thinking it might be related to CHT removal.
Decided to uninstall CHT 1.7 (and Advanced Home Tab 2.2.4) after getting fed up with lag/freezing/etc, and now I have three problems on the home screen:
1. The top-left part of the calendar (day, date) widget seems to be the same size as the CHT version, i.e. smaller than the default one, and therefore sits 20-40 pixels away from the rest of the calendar. EDIT: it won't even let me launch the calendar or alarm by pressing on it (or any area of the widget)
2. I can no longer scroll the apps to reveal the additional 6 below the 3 that sit at the bottom of the screen. EDIT: this has just started working.
3. The 'Menu' button no longer works on this screen either - it flashes upon touch but nothing pops up - so I can't access any quick links etc.
Can't find anything on the forum search or elsewhere.
Also, CHT may not have uninstalled properly because it won't disappear from the list of "removable" apps. Does this mean it's left some legacy code that is forcing the calendar to mis-display, etc?
Thanks
SC
Decided to reinstall CHT 1.7 along with the editor and see what happens. Running only one screen of apps (4x4) to see if this makes it more stable.
make sure you turn off sense before uninstalling....
conantroutman said:
make sure you turn off sense before uninstalling....
Click to expand...
Click to collapse
Ok - so do I go to settings > menu > all settings > today > items > check Windows Default before uninstalling ... and then uncheck it after reinstalling?
Thanks
yup that's the one.....
check default, uncheck sense, soft reset, uninstall, reset, start up sense again.
Not guaranteed to work but its worth a try....
hope that helps.....
conantroutman said:
yup that's the one.....
check default, uncheck sense, soft reset, uninstall, reset, start up sense again.
Not guaranteed to work but its worth a try....
hope that helps.....
Click to expand...
Click to collapse
I'll put this out there just in case anyone else gets into a pickle like I did earlier today!
If you decide to install Cookies Home Tab, then install Advanced Home Tab, only to discover that the version of CHT is a lot newer than the version of AHT you thought you had....
Sense really gets messed up, so much so, all you get is white background and no response, to *anything*.
I managed to get my beloved HD2 back from the brink of certain hard reset by:
Attempting connection to my laptop (Win7) using ActiveSync (thankfully it was set to that as default!) and attempted the uninstall of AHT through Mobile Device Center.
This appeared to go ok, except MDC did close unexpectedly after the uninstall.
I brought it back up, and it was still installed. Ok, plan B.
Plan B:
Just before the SIM card PIN entry screen (I'm guessing this screen pauses the boot up just enough) you can open the start menu, this allows access to your programs.
I used Total Commander to launch CHT installer (I always keep cabs on my SD card) which attempted uninstall and failed on a few files (as Sense was still switched on, switching it off wasn't an option due to not being able to get this far until now).
I then managed to get into the Windows Settings via the Start menu, and disabled Sense before rebooting. My god, it was slow booting that time!
From here, I reinstalled CHT and CHTE, uninstalled AHT and all is well!
Hopefully this is my last question...
Somehow I've managed to disable the auto lock screen . So when I press the power button briefly to wake up the device, there is no lock screen.
I have searched high and low in the manual, on the phone and on the internet but no joy - can't find any hint as to turn this back on.
The only idea I have as to how I may have accidentally turned it off is by installing Profile Switch - but uninstalling and soft-reset has not made a difference.
I'm going to have to resort to a hard reset - anyone who can help me avoid this??
p.s. am a fairly novice user who has done nothing scary with this phone - only actions since purhcase have been to install e-wallet, GPS Sport Tracker (now uninstalled) and Profile Switch (also uninstalled) - no messing with Roms or any other software / registry customisation.
Eigertop said:
Hopefully this is my last question...
Somehow I've managed to disable the auto lock screen . So when I press the power button briefly to wake up the device, there is no lock screen.
I have searched high and low in the manual, on the phone and on the internet but no joy - can't find any hint as to turn this back on.
The only idea I have as to how I may have accidentally turned it off is by installing Profile Switch - but uninstalling and soft-reset has not made a difference.
I'm going to have to resort to a hard reset - anyone who can help me avoid this??
p.s. am a fairly novice user who has done nothing scary with this phone - only actions since purhcase have been to install e-wallet, GPS Sport Tracker (now uninstalled) and Profile Switch (also uninstalled) - no messing with Roms or any other software / registry customisation.
Click to expand...
Click to collapse
Try SmartLock 2.0E very good.
anhphe076 said:
Try SmartLock 2.0E very good.
Click to expand...
Click to collapse
Probably a great app, but all I want is simply to return to the default HD mini behaviour...
Change:
HKCU\\ControlPanel\Keybd\DevicelockWhenSuspend
from 0 to 1.
fighter7139 said:
Change:
HKCU\\ControlPanel\Keybd\DevicelockWhenSuspend
from 0 to 1.
Click to expand...
Click to collapse
Thanks for your help!
I just upgraded my HD2 from Gingerbread to Jellybean 4.2.2. So far everything works great except for my open/close menu.
Here is a youtube link of what I am dealing with:
http://www.youtube.com/watch?v=pd0ucQyyMMM&feature=c4-overview&list=UUL-MgWl4c3Iv-H1iy3YTbLA
I've installed
2.6.32_tytung_jellybean_r2
US T-mobile HD2
I've rebooted the phone many times and even tried reinstalling the ROM and I still have it.
If anyone knows how to fix this, please let me know.
Thanks.
so this is about after clicking on menu button, it launches recent apps? or about the graphics glitches?
anyway, are you using the latest version of the rom?
gilbert32 said:
so this is about after clicking on menu button, it launches recent apps? or about the graphics glitches?
anyway, are you using the latest version of the rom?
Click to expand...
Click to collapse
This is about the graphics glitches. I have it so that when I hold down my menu button it takes me to the open/close menu. I have the latest version. I just checked for an update this morning and there was none.
try to remove the live wallpaper, and check force gpu drawing and similar settings in developer options and try.
gilbert32 said:
try to remove the live wallpaper, and check force gpu drawing and similar settings in developer options and try.
Click to expand...
Click to collapse
Hey! Removing the live wallpaper did the trick. I don't know where to find the developer options (in settings?) but if I check the force gpu drawing like you suggested do you think that I will be able to use live wallpaper again?
jimvsmij said:
Hey! Removing the live wallpaper did the trick. I don't know where to find the developer options (in settings?) but if I check the force gpu drawing like you suggested do you think that I will be able to use live wallpaper again?
Click to expand...
Click to collapse
yes, in settings. it might fix it, but i'm not sure
gilbert32 said:
yes, in settings. it might fix it, but i'm not sure
Click to expand...
Click to collapse
Hmm, I don't see the option in the settings. Is there another way to get there?
settings, about, tap build number 7 times and developer options should appear
gilbert32 said:
settings, about, tap build number 7 times and developer options should appear
Click to expand...
Click to collapse
Thanks! I now have developer options! I kept trying different things and finally found that disabling HW overlays fixed it! I hope that whatever that means doesn't screw up something else.
Hey, you seem to know a lot. I was also wondering if you know how to keep auto update on for the android play store but disable it for certain apps. My wife really does not like the new update to the google navigation/maops on her stock GS3 and prefers the old. I uninstalled the update to set it back but I didn't want to turn off her auto update because I know that she will never update her apps manually. Any suggestions?
@jimvsmij sorry, i have no idea about that
jimvsmij said:
.. how to keep auto update on for the android play store but disable it for certain apps... Any suggestions?
Click to expand...
Click to collapse
Open the Play Store > Go into the app you want to disable auto-update for > hit the menu button > You should find "Auto-update", uncheck it.
Other apps will update normally while this one won't.
Marvlesz said:
Open the Play Store > Go into the app you want to disable auto-update for > hit the menu button > You should find "Auto-update", uncheck it.
Other apps will update normally while this one won't.
Click to expand...
Click to collapse
I saw that option earlier but I thought that unchecking the auto-update would apply to all the apps.
Thanks!
Ok people tested this with another person and he confirmed also.
1)Make sure advance calling is off
2) Activate developer options if u havent already done so.
3) find windows transitions and change to off for all three
4) clear all left open windows using the far bottom right button
5) Go to dailer and see the keypad gone.
Any ideas why this would be? and for me the only way to get back is changing the transistion back to .5 for all three and clearing all the windows again. Its odd. i didn't try with advance calling because advance calling is still alpha stage in my opinion.
the_rooter said:
Ok people tested this with another person and he confirmed also.
1)Make sure advance calling is off
2) Activate developer options if u havent already done so.
3) find windows transitions and change to off for all three
4) clear all left open windows using the far bottom right button
5) Go to dailer and see the keypad gone.
Any ideas why this would be? and for me the only way to get back is changing the transistion back to .5 for all three and clearing all the windows again. Its odd. i didn't try with advance calling because advance calling is still alpha stage in my opinion.
Click to expand...
Click to collapse
Thats been there from ages!
It has nothing to do with advance calling though.... i think its something google knows but didnt care to fix cuz lollipop is already out with a whole new dialer! One work around is press on the dialer icon and press back again... You get the dial pad!
the_rooter said:
Ok people tested this with another person and he confirmed also.
1)Make sure advance calling is off
2) Activate developer options if u havent already done so.
3) find windows transitions and change to off for all three
4) clear all left open windows using the far bottom right button
5) Go to dailer and see the keypad gone.
Any ideas why this would be? and for me the only way to get back is changing the transistion back to .5 for all three and clearing all the windows again. Its odd. i didn't try with advance calling because advance calling is still alpha stage in my opinion.
Click to expand...
Click to collapse
Moto Maxx here, same thing. But if you go back and then again to the dialer it does show up.
Its been like that forever.....I have mine set to .5 because of it. Annoyed the crap out of me.
Sent from my XT1254 using Tapatalk 2
I'm not sure it can be called a bug when developer options are merely for developer testing and development scenarios. Its not being used as intended, so unexpected results show up occasionally.