Mogul will not sleep after closing active sync - Mogul, XV6800 General

Just updated to wm 6.1. I like to have an empty running programs list, so I am in the habit of closing everything. For some reason, though, when I close active sync, the mogul will not sleep. I press the power button and the screen goes black, but then it turns back on instantly. I can do this over and over again. Rather annoying. And when the screen is on all the time, my battery life goes from a week to a day. Has anyone experienced this or is there a fix?

Related

backlight, incoming call delay, and alarm bug

Cingular 8125
I have 3 issues...
1. The backlight seems to shut itself off every once in a while. I'll try to wake the phone from sleep mode only to notice there is no light, so I have to move the phone near a light source to see the dimmed screen and work my way to the backlight setting and increase it back to normal.
This happened once while I was driving
Is there a cure for this problem?
Also, I noticed spb pocket plus's backlight slider on my today screen does not work, nor do the shortcut commands it has for backlight up/down/loop etc.
2. When I was testing a new ringtone, I called my phone from another phone. I noticed it does not receive the call on the first ring. It receives it on the 2nd ring. I can hang up during or right after the first ring and not have it come up on my phone. Is this normal?
3. Alarm bug. This %$#@ lead me to hard-reset my phone 3 times already. When my phone is in sleep mode and an alarm triggers, sometimes the phone won't wake, but keeps playing the alarm. I wake the phone manually only to notice there is no alarm notification, but a flashing orange light and constant alarm sound and vibration. A soft-reset seemed to make the problem worse. Finally, I found a program called memMaid which lets me delete notifications and duplicate notifications etc. Is this the best method to cure this problem?
Thanks in advance.
With the backlight, do you have it on charge at the time of it messing up?
i've had this issue but only when the phone was on charge.
if i unplugged the phone, backlight came back and then i simply plugged it back in
other than that, no cure that i've found. what software version are you using?
for the alarm, not seen that, i have noticed that recently i've had the alarm apparently going off (but it hasnt!) and then almost 2 hours later, i have a msg saying "alarm" with the dismiss button and the time of when it was supposed to go off. very odd. luckily i have a nokia 6230i that i use as my alarm clock.
and for the calls... i have the same problem but only when i copy over my SMS back onto the device. after hard reset its fine, but as soon as my msgs go back, i think the phone mem gets slower. (i have 1600 sms now on the phone with about 300 contacts with pictures)
I have the same issue with sms where the phone will light up, 5 seconds after it recieves the sms... so i'm guessing thats the same as the phone side, it lights up on my end, 3-5 secs later it rings (which is eqiv to one ring on their side so it hangs up after 2 more rings).
very strange issues though, i hope softwre updates fix it because it is annoying me now!
also have an issue with my camera where if you dont X out of it, then dont expect it to load again unless you reset the phone. it just shows the "egg timer" and thats it. useless camera software but great pda/phone. again luckily i have a camera always with me anyway.
Only thing i have experience with this is for 1).
I still get that backlight problem.
It started happening when i installed PocketZenPhone beta.
After every soft reset, if i let the phone go into standby or the let the backlight time out, the backlight setting will go all the way to the lowest.
I don't know how to fix this bug, only thing i've done to sort with it is have a Today Screen launcher set up so that i have an icon that leads directly to the backlight setting, so whenever it dims on me, i'm 2 thumb pushes away.
Actually, this is the first time i saw this, when i installed zen on mine too!
It was then i realised that if you unplugged the power supply then replug it in, it fixed it
in the end, i got fed up of zen's stability or the lack off so i removed it, hard reset etc
it still happens but very rarely, and when it does, its just because i've turned it off and on while it was on the power supply
i have the same freaking problem with backlight. not sure what the deal is but very very annoying. is there a fix to this problem??
i have the same freaking problem with backlight. not sure what the deal is but very very annoying. is there a fix to this problem??
Mine had the occasional "backlight set to off" (i.e. pushing the 5-way would NOT turn it back on - had to use Control Panel applet) problem too. I never used Pocket Zen Phone on this phone (have on others in the past) but did use both SPB pocket plus and Phone Alarm.
I think the problem is somehow related to apps that try to control the backlight. As you've noted, SPB's backlight applets don't do anything, I think that PZP and Phone Alarm, as part of their attempts to control the backlight in their profiles mess it up somehow.
What i did was limit my profiles in PA to only two, and make sure both of them were set exactly the same way as far as controlling the backlight:
o Both profiles have backlight set to 50% all the time
o Both profiles set to power off the backlight at 3 minutes on both AC and battery
o Both profiles set to suspend the device at 2 mins on battery (so never getting to the "backlight only power-off" setting above).
o Having the backlight go dark on AC is new for me, but it keeps it consistent with the battery setting, but it's no biggie and if it ain't broke...plus if I touch any button it comes back on
I also removed SPB pocket plus and found some freebie utilities that do what I wanted from SPB.
So I'm not positive it's related, but doing these three things and i haven't had the light go dark since. Every once in a while after a reboot the light does go dark, but hitting any button or the 5-way brings it back so it's not the same "setting has been set to no backlight at all" problem I was having, and only seems to occur soon after a reboot, and then not again.
-JMS
i fixed my problem by flashing rom over with 2.17 US version.

Backlight Not Coming Back On?

I have a Cingular 8125, with the 2.17 ROM, and here is my problem.
Whenever I hit the power button to turn the screen off it goes off. Then, when I hit it again to turn the backlight back on, and my screen stays dark. I can access the menus and such, but I have to do it while the backlight is off.
I have Handmark Pocket Express and SPB Pocket Plus on it, if that makes a difference.
Has anyone had this problem, and does anyone know how to fix it?
That is a known poroblem with Pocket Plus. I had that happen, and was able to navigate to the backliht section in settings to turn the light back on. I removed the backlight slider from the today screen also. This only seems to happen once after installing pocket plus. After I turned the backlight back on insettings, it never happened again.
That stinks, because I turned it on and it still did it. Every time.
i also have this problem, but i don't have spb pocket plus, i have spb backup
I have the same Problem, Backlight not coming up. It's a bit different though, When the phone is only a short time off the USB cable, the light comes up normally. When the phone is disconnected longer, like 20-30 mins, it doesn't come back up. I can go to the Settings screen and switch it on there (the dial is all the way to the left when I go there), but next time it's the same.
I also have SPB Backup installed, but I think it's more likely to be PocketPhoneZen, which I also installed yesterday, and that was when the problem started. Guess I'll post something in their forum too...
Lars

Turn Universal on/off by opening/closing Lid

Hi all,
I upgraded to an O2 Exec a little over a week ago from a Blue Angel.
Initially I had a few concerns about it, but thankfully I found this forum, and have managed to get a number of enhancements, from increased storage and better radio (v1.09) to being able to turn on the flash light using a hardware button. My Exec is now running faster than my Blue Angel ever did, and hasn't frozen once. I've already become quite attached to it.
One thing that I think would be useful would be to have the unit turn on when the lid is opened, and off when it is closed. In the Power settings you can uncheck the box that turns off the device if it is not used for x mins, which has the effect that the screen will come on whenever the lid is opened. However, because the device is still running the battery still takes quite a hit even though the screen is turned off, and even when you lower the cpu speed.
Is it possible to turn the device on and off by opening and closing the lid?
Cheers
Rowan
Bump
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
jmdrizen said:
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
Click to expand...
Click to collapse
You're not really going into standby mode by closing the case, try switching on wifi or bluetooth and look at the flashing indicator LED, it will still be going whien the case is closed. Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
shuflie said:
Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
Click to expand...
Click to collapse
From what I know, the Universal has no real OFF mode, only standby, EVEN WHEN YOU PRESS THE POWER BUTTON. On mine, BT and WiFi still flashes even when I press the power button or just close the screen.
Pressing and holding the power button turns the backlight off, a quick press (or tap as I said before) makes it go to standby and should turn off everything but the phone part.
Okay well weve taken a really fun detour discussing the technicalities of standby and 'power off' but lets digress for a moment back to the original topic...
Rabangus, seems the best option you have is what you were doing. The hit to battery shouldnt be that large. I gave it a try not too long ago the way you and the other member had it set up again, and yes youll definitely have to charge it every night but it was doable. But I wasnt using wifi or bluetooth either. I am surprised that using Xscaler it still takes way to much battery. I assume thats what you are using to lower the CPU.
Oh well unfortuntely thats the way it is chief.

After taking the phone out of standby, screen becomes unresponsive.

This happens often, but not every time.
I press the power button to put the phone into standby.
I press it again to take it out, the screen turns on, I try to press the unlock jog or any of the buttons along the bottom - nothing.
I noticed sometimes if I'm quick, it begins to animate the jog, or I get a vibration from a button along the bottom, but then it goes unresponsive.
Putting it back in/out of standby fixes it most every time.
Any ideas?
I have this same problem. Usually worse the longer it was in standby. Helps somewhat to reset the phone once a day, and also use a task killer program to kill apps you arent using.
I ended up taking the phone back to the store and they replaced it with a brand new one. The new one works flawlessly. Also, my wifes had been working since we got them saturday without issue too.
Sent from my MB860 using Tapatalk
Seems to happen to me sometimes right in the morning when I take it out of the charger... a bit annoying but nothing too serious

Lock Screen won't turn off

Hi there. I'm currently having an issue with my S7 edge where the lock screen won't turn off after some time. The screen does turn off when I'm using the phone normally from the main screen after some time passes but it's just the lock screen I have issues with.
Whenever I charge my phone or just hit the power button once to see notifications on the lock screen, it'll just stay like that until the same time the main screen timeout configured time passes (5 minutes) and this is getting annoying and somewhat draining a little bit more of my battery. Previously it was working fine and the lock screen would turn off after around 10 seconds or so.
Has anyone faced any similar issues with their phones? I haven't tried a factory reset yet but I'd want that to be a last resort.
Clear Background apps.
It happens when you left some games or apps by pressing home button but it keeps running. Hope they will fix this soon.
Have you tried pressing that little button on the right side of the phone? That usually helps.
Yeah...I already tried that with no luck. Even tried uninstalling some recent apps in case one of them was cause but it didn't work either. Any other suggestions?
The issue isn't with turning the phone screen off by pressing the power button, it's the lock screen itself not turning off after a few seconds when it usually does.
I'm having the same problem, had good lock installed thought that may have been the problem but after uninstalling that I'm still having the same problem with samsungs oem lock screen. I too would like an answer or fix for this. also to note, in developer options the stay awake is off and no apps running in the background.
I am having this problem now also. The screen will lock, but the display stays on but dimmed. I can tap the screen and it will get bright. Now I must click the side button every time I set my phone down or the screen will drain the battery.
I'm facing exactly the same issue. When the screen is locked, it stays on for the same time confirmed to when its unlocked. For example, 1 minute, instead of 10-15 seconds.
Any workaround discovered for this?
Did anyone find a solution to this problem?
I thought that I might've been the only one! This problem only appeared on my phone after the Nougat update, and it's extremely annoying as I rely on notifications waking the screen for my main messaging app.
joelnet said:
I am having this problem now also. The screen will lock, but the display stays on but dimmed. I can tap the screen and it will get bright. Now I must click the side button every time I set my phone down or the screen will drain the battery.
Click to expand...
Click to collapse
Hello, I am having the same issue in my Redmi note 11 pro plus Phone. In my case The screen will lock but display stays on with dimmed light. Usually it is not visible during day, but in dark room its visible. And it stays the same way whole night. And battery is fully drained and phone is turned off. Is there a solution for this??

Categories

Resources