Related
hello! i've searched but didnt find any help with my problem. When my jasjar rings (incomming call) and after i press the answer button (the green one) i need to wait about 1 to 2 seconds before i can hear the person that is calling me...strange...did this ever happen to you? how can i solve this problem? Thanks in Advance
Yes, i have the same problem on my MDA Pro
After pressing the green button, i have to wait 3 secounds with speaking.
I had the same problem and now is solved.
In phone/options/band select WCDMA (not automatic)
i think that didnt solve the problem...sorry...thanks
I have the same probelm on the incoming call. However, i finally realized that it's the problem on the Pocket Plus V3.0.4 installed on the system.
It appear to be normal once i removed the program.
It's the case for me, and i hope it would help you as well
I too have this problem with my I-Mate Jasjar. I need to wait for a few seconds after hitting the answer button before I can hear the calling party. I did a hard reset and installed the latest wwe ROM available on clubimate site. The problem still persists even without any third party software installed. So I do not blame pocketplus for this problem. I think this is a software/hardware issue which should be addressed in a ROM upgrade.
I have the same problem with my JasJar. I have also updated to the lates ROM from clubImate by advice from clubImate support.
Sometimes the phone does not even answer the call at all when pressing the green button. This is becoming an even more expensive phone since I have to call back so many people on account of missed calls
Seriously, It cannot be right that a problem like this exists on a phone in this price range. ClubImate support even said they had never heard of this problem before.
i did a few hard resets and the problem persists without any extra software installed. "Very bad bug". i've already test a K-jam and it works beautifull...i'm sad
Got my XDA Exec today. It's pretty good but is not the same as my XDA2. Even less phone. More PDA...
If I turn my machine off in landscape mode and then close the lid with the screen out (like the XDA2) then when a call arrives it takes ages to answer because the screen has to rotate first to portrait mode.
If I turn off and close in laptop mode (landscape) then it rings immediately and I can answer it immediately using the hinge buttons.
Maybe it is the same for you?
i have noticed it seems to be quicker to goto portrait than to landscape in all respects of use
ok, lets try it...thanks
how i test it: jasjar "on" charging, open in portait mode. same delay.
L to P is roughly twice as long for me.
going to L i get twist and flip and the display is done ready and waiting
going to P i get twist and flip then get a 2s ish of L before it flips to P
this was battery power
*** its the same on mains and battery !
Carnivor said:
L to P is roughly twice as long for me.
going to L i get twist and flip and the display is done ready and waiting
going to P i get twist and flip then get a 2s ish of L before it flips to P
this was battery power
*** its the same on mains and battery !
Click to expand...
Click to collapse
When my Exec is on, the rotation is pretty much instant. I have no apps running. It's only when a phone call wakes it up that the rotation is slooooow.
My Qtek 9100 also take app. 5 sec before it rings, and the S100 I had before was the same. My dad has an XDA mini, same problem. It seems like pocket plus will increase the problem, but even without any extra software its not working perfect. Its strange after such long time, they havent been able to solve simple problems like theese.
I also get this, Its very annying. Maybe they incorperated it so you can answer the call asap and the before it acually picks up, you have a few seconds to turn the screen round and see whos calling ect?
I have an Exec and there is certainly a knack to answering a call on it, but i'm getting better!!!
Firstly the voicemail seems to kick in way too early, i only get 4 rings of the 'ring' ringtone max before the VM kicks in, sometimes i think it is less, but i may just be going deaf! does anyone else find this a problem?(not deafness)
As i usually have the exec closed in my pocket, this is how i answer a call.
1, Hear the first ring, if i don't it's too late already!
2, Drop everything, and remove phone(ha!) from case and open into laptop mode only. If i rotate all the way into PDA mode the screen takes too long to change and the call goes to VM before i can see who it is.
3, Answer call after seeing who it is
4, Rotate or close screen and put to my ear and wait 2 seconds to speak.
It's a real pain in the arse and very annoying.
Great forum btw, it's been very helpful, i knew bugger all about PDAs three weeks ago.
Ian
Which button(s) do you have success with?
The small green on the side,
the green above the other keys on the keyboard,
the soft key button,
or touching the screen?
ipanter said:
...
Firstly the voicemail seems to kick in way too early, i only get 4 rings of the 'ring' ringtone max before the VM kicks in, sometimes i think it is less, but i may just be going deaf! does anyone else find this a problem?(not deafness)
...Ian
Click to expand...
Click to collapse
If you're using the Exec on o2, you can adjust the cut-in delay at the o2 end. You do so by keying in/sending the following to o2:
**61*901*11*xx# [send]
(where xx is number of seconds, e.g. 30.)
Note: I think the maximum delay allowed is about 30-secs - at least I've never got it to extend longer than that!
I have found that o2 occasionally reset mine back to about 10-secs, so have it programmed into a contact number.
HTH
I've found something interesting.
I tried to swap two sim cards.
<boring>
The one originally in my phone was a sim card from Orange Denmark (where I live). Orange has since been bought by Telia, and this same sim card is now using Telias network. This is by design. It gives my the roaming symbol all the time since the buy-over.
To say the least, some things have been very ****ty in this process, so I thougt that I might try another sim card.
</boring>
I had another one from TDC (another danish operator), and bang! My Universal (Jasjar) answers instantly - every time - on all the buttons!
Could some of you who have this problem as well, please confirm this? Please tell what kind of sim card (and country) you are networking through, and try another one.
in a neverending battle with a phone that is underpowered and clumsy, i now have had enough. I figure i will give this one shot here before i buy a pearl or dash on monday (probably a pearl as the wm phones i have used have all seemed to be piled of ****e).
Everytime i try to activate my phone on my home wifi network, it freezes. Anyone experienced that, got a fix? It's ridiculous how touchy this phone is and annoying.
Actually, perhaps you can suggest some other fixes to annoyances.
I dial and then put the phone to my face, and poof, my cheek hangs it up.
After boot, the message button won't open my poutlook, it opens but doesn't display. If i hit the text or email entry on the today screen, it works fine.
Bluetooth won't work correctly, insomuch as it won't output to the headset but people can hear me fine
I get notification i have a voicemail, and i dismiss it.. so dismiss the bloody thing - i still have the notification by the clock, i want to REMOVE the link to voicemail by the left bottom softkey.. so i can see other notifications, annoying, annoying, annoying.
Overall i find this phone to be a bulky, heavy, clumsy, unresponsive POS. I know that's a negative thing here, but i am really frustrated.
Chill out, relax. I've been using the wizard without any problems whatsoever but if anything, the WiFi is a problem because of my stupid router (a WRT54GC). But even then, once it's associated, it's not a problem. I have a Belkin downstairs which is the gateway device and I have 0 problems associating and using WiFi with it. My device is an XDA Mini S.
Now, enough about me, here's a few questions:
When you say lock up, what locks up? The whole phone? Does pressing the keys bring up the keypad lights? Is this the case after a hard reset as well?
I can't use my cheek to disconnect the phone ...maybe because I have a screen protector on? I don't know but I never had this problem :S
No comment on the poutlook but mine works fine with everything so far :S
I haven't used BT for headsets but this might depend on the profile used by the headset.
I don't use voicemail so I can't say much about the notifications.
The wizard is by no means flawless but I have not come across anyone with the same problems as you...but then again, I've been away for a fair bit :S
the message notification is terrible. If there's a voicemail. You can't see anything else until you check it. Dismis just brings it back. All other dismiss fine. THisis on my sx-66 wm5
Sometimes I notice that my device is on already when I take it out of my pouch.
I left it on my desk once to monitor its behavior... and sure enough, sometimes it will turn itself on as if it is receiving a call, but no call rings. Then the screen dims (as it should) and sits like that for a while.
Has anyone else noticed this?
What causes my phone to come out of sleep by itself?
I'm using the Sprint Mogul version with WM6.
yes, i've noticed usually that happens when i loses reception... don't know how to fix that hopefully someone out there is smart enough to figure it out
My Q did the same thing... it lights up for no reason, then times out like it should. If I don't lock my phone I end up opening a program or calling someone also it has to affect battery life. I have not been able to find out why the phone does this but I would sure love to know how to make it stop.
Do you have any emails setup that are pushed or checked on a schedule?
I find this happens when I am in fringe areas. I think it comes up when you lose service/switch to roaming/etc. I have slide 2 unlock so its really not a big deal.
ppc wakes up to password screen
I know I have read this somewhere but can't remember where I read it but lately I have had this happen. I reach for my mogul to find it awaken and with a screen asking for a password. I never have set a password and leaving password blank doesn't work. I have to soft reset to get out of it. Don't know if this is a mogul bug, wm6 bug, or 3rd party app bug. I have slide2unlock 1.19 installed as well as the Grumps iPhone theme, and HTC Touch Today plugin. Other significant apps installed includes Voice Command 1.6, smartskey, and Live Search 2.0
Anybody know the cause?
Edit: oops, meant to start new thread.
My 6800 randomly turns on and the screen for the voice dialing comes up. I have no clue why this happens but it is annoying and drains the battery faster.
mmaryo said:
My 6800 randomly turns on and the screen for the voice dialing comes up. I have no clue why this happens but it is annoying and drains the battery faster.
Click to expand...
Click to collapse
Could it be that you have a BT headset that is trying to connect to it? I know mine reacts like that- as it should, since the BT should trigger a voice command.
Dishe said:
Could it be that you have a BT headset that is trying to connect to it? I know mine reacts like that- as it should, since the BT should trigger a voice command.
Click to expand...
Click to collapse
yeah that's happening to me too, and my bluetooth is off. it's driving me nuts, i'm almost tempted to just lock the lock on my phone
HI, I'd love such a function. the screen automatically turn off while answering a call and turn on while hang up the phone.
but i tried both adavanced config 3.3 and HDTWEAK. they both dont work.
is there any other way to make this happen??? most of guys love this fucntions. IPHONE has this func. lol
thank you guys!
I think this happens normaly on HD. The opposite we are looking for and I know tha up to now nobody has succeded yet
it's a pity. hopw somebody could make it happens. lol
I did notice that the behavior is not always consistant.
What happens is sometimes after i make the call, it turns the screen of a second after I click the call button, while sometimes, it takes as long as it is needed to get a "connected" state for the call and having actualy the phone up next to my head!!
Hi,
I faced this problem too often, so I ask on this forum to know if it only happens to me:
when I end the call, telephone programs stucks. In the top bar, the indication of an on going call is still there. Everything is working except telephone application. I can't open the telephone options. Even if I turn on Airplane mode, the phone logo in the top bar remains.
Any idea?
I had that problem once. Did it occur when you dialed a number not in your phone book? It turned out the prompt for saving a new dialed number was still there but I somehow couldn't access it. Perhaps turn that setting off?
no, it was an outgoing call to someone in my phonebook. (at least in my last problem)
facing the same problem. after ending a call the phone app freeze a couple of minutes and sometimes more than ten minutes
Did you installed the HTC patch to avoid the freeze ?
I didn't.
Could it be usefull there ?
This is really annoying if you have to wait 10mn before doing an another call !
Problem happened again
The problem happened again yesterday.
But worse. I was leaving a message on an answering machine. and I couldn't end the call !
Pressing the right key (end call) had no effect !
Usually in my previous problems, the other user was ending the call.
So I had to switch off the phone in comm manager !
I'm surprised that no one else faced this problem !
I tried to follow one's advice to wait then until phone gets back to normal. (release the phone icon in the top bar).
After one hour, I finaly rebooted the phone to be able to do an outgoing call.
Help !
Phone blocks during or after a call
Hello guys and girls
I had the same problem last week, a couple of times in a row, I was on the phone with a contact, after a couple of minutes I couldn't hear anything anymore and tried to end the call but no joy, a soft reset did the thing the first time, the second I waited a couple of minutes wich worked aswell. It was very annoying I must say especially as it happened 4 times in a row...
Hoping for a solution
Greetz
It seems a bug. You can press volume up/down buttons on the device itself to open the volume bar screen. After that just press somewhere on the grey area to go back to home screen. The top bar will restore from the phone application.
It's not the top bar. The phone application is completely unavailable.
We see the top bar,but the phone icon is stuck. Like if we were still on call.
I too have a similar problem.
Although I haven't particularly logged the prolems, I think that it only happens on incoming calls, and not outgoing ones.
During a phone call, the incoming sound just goes mute, and afterwards I can't hang up the call.
I reckon I have lost well over half the calls I have received because of this.
Luckily, not many people call me!!
I reckon this is a CRAP phone, and am seriously thinking of getting a REAL phone, and just using the HD as a PDA device. Good old HTC!!!!!!
I edited the title of this topic.
The phone app is really stucked : I called an answering machine, I wasn't able to end the call !
Help !
I am thinking of changing ROM.