hi recently i just installed touchflow 3D HD,its as been a bit laggy since,i wish to remove it,anyone know how to remove it??have tired to remove it from remove program but it still cant get remove,because of this i also cant use activeSync =(
perform a hard reset and the x1 is free
daniel
Related
I have an O2 XDA mini s. I got really fed up with all the O2 stuff taking up all the space on the today screen so I did a hard reset and then did a soft reset before all the O2 stuff got installed.
I'm much happier with this now but the only problem I have is that the smart dialer does not work. How can I reinstall just the dialer without installing all the operator stuff?
Cheers
The SmartDialer is a CAB file in the extended rom.
Install it and you will be fine.
If you don't know how to find it, I attached the SmartDialer CAB from my Qtek 2.18 Rom, I'm almost sure that if you install this one, you will be just fine
Worked a treat - Thanks Molski
I did a little house cleaning on my phone today and accidently erased the smart dialer reg settings (ok well not accidently but now i can't open the smart dialer options). I used the above .cab to reinstal the smart dialer program but its still not coming up... any suggestions?
If its any help i need the customization something or other settings in
\HKLM\Software\Apps\
edit: nevermind i got it, i'd turned off the cingular skin in \HKLM\Securtiy\Phone\Skin
Hi,
I have a o2 xda mini s and I have recently installed Touch keyboard v1.0 and after a few minutes using it i didnt like it so i decided to delete it but after it had uninstalled it come up with the error message could not remove all of the files ect. so i decided to remove it from the list of programs anyway but now when ever I go into any program i can still see the "abc" or "xt9" and it is doing my head in and i cannot remove it. also because of this i cannot use the symbols on the normal keyboard. can anyone help me or will i have to Hard reset my phone (again).
thanks dean
please, i need an answer to this question too!!!!
any replies pleeeeeease
Hey guy.
First of all i would like to thank you all, for a great forum. I used it alot to tweak my niki, but now i ran into some really anoying problems for the first time.
Earlier today i made a hard-reset, and then installed all my apps again, to get rid of some of the bad apps I had testet.
Then i tried to customice my touchflo cube, with a new "skin" with some new functionaliti.
But i pretty much just f.... up the cube, and now i cant use it.
I cant slide to the left an right, and sometimes i cant even activatet it by sliding my finger upwards. Is there ANY possible way for me to install the original cube again. I would really prefer to avoid a hard-reset. I just used all day, to get a nice config on everything on the phone.
Cheers everybody.
//Xabre_dk.
Yesterday i downloaded a Manilla 2D in .cab file. I copied to my phone, install and i have on my screen "Tap here to launch TouchFLO", i take it but it dont work. Can anyone tell me wtf? Plz help
Gonna need a little more info than that, chief.
For instance:
Are you running WM5, or WM6?
Which release of M2D did you try to install?
Do you have HTC Home installed?
Did you RTFA?
...and lastly, try posting your problem in the thread for that application, not in a board three clicks away from it, where the guy that cooked it might never see your questions.
Fazi93 said:
Yesterday i downloaded a Manilla 2D in .cab file. I copied to my phone, install and i have on my screen "Tap here to launch TouchFLO", i take it but it dont work. Can anyone tell me wtf? Plz help
Click to expand...
Click to collapse
Dude which version of touchflo 2D did you download ? Downloading a single cab install for the Wizard is crazy. Download the 18 Release and make sure you install the Shared DLL's and the HTC Patch for older devices BEFORE installing the manilla cab. The easier alternative is to backup your device and flash a Manilla 2D rom found in the Wizard Mobile 6 Forum
unable to launch touchflo 2d
Hi guys, im using a HTC touch 3G running on windows mobile 6 if im not wrong. My touchflo juz stopped working and "tap here to launch touchflo" juz pops up. But even after i tapped it wont work. I have not installed any programs prior to this problem it juz struck me outta the blue. Any idea how can i resolve this? THANKS!
icopral said:
Hi guys, im using a HTC touch 3G running on windows mobile 6 if im not wrong. My touchflo juz stopped working and "tap here to launch touchflo" juz pops up. But even after i tapped it wont work. I have not installed any programs prior to this problem it juz struck me outta the blue. Any idea how can i resolve this? THANKS!
Click to expand...
Click to collapse
Are you ABSOLUTELY sure you didn't change M2D panel settings, turn on a new panel, or otherwise run a program like M2DC that would create registry entry changes? Did you accidentally enable something other than Manila in the Today settings? Also, check to see if you have enough free memory to actually run it. Lots of people miss the fact that you need to clear out temp files occasionally, and WM5/6 does a terrible job of it. Use ClearTemp if you appear to be running out of memory. Also, make sure that programs you open are actually getting closed. Filling up RAM with running programs (especially those that run on startup, like battery minders, lock programs, script programs, etc.) could also prevent M2D from running.
HI,
With some applications and especially SPB wireless Monitor, TF3D won't launch after a soft reset.
Does anyone face the same problem?
It seems that any application of the today screen will conflict with TF3D?
I've had random problems with other software...
Try to unsinstall it and install it again...It worked with me...
If it still doesn't work, try installing without having TF3D opened, and if it still doesn't work, try installing with TF3D opened, but after the reboot, instead of inserting the phone pin, press cancel.
I hope this works with you. With me it has done the job.
HastaSSSS
Thanks, it worked!
Hi!
Could you share wich trick did you do of what s1rl4ncel0t suggested?
Or did you do it all? Wich one fixed youre problem.
I have the same problem.
>MadAri<
phigafr said:
HI,
With some applications and especially SPB wireless Monitor, TF3D won't launch after a soft reset.
Does anyone face the same problem?
It seems that any application of the today screen will conflict with TF3D?
Click to expand...
Click to collapse
I have the same issue, can you please tell us what you did to solve the problem?
/CerebralCortex
Please! my HD will not start!
Please! my HD will not start!
I was installing the application SpbWirelessMonitor and instação caught, so I had to reset the device, from now to start the phone is static on the screen "smart mobility" and Windows no longer starts!
What do I do?!
Please help me, I'm newbie!