Database Users

.CAB can not write registry at WM2005

yesterday,my C500 upgrade to WM2005,i make a Chinese Fonts pakage,only packs .ttf file can be writer in ram,but add registry value Latter，install cab file show:Installation was unsuccessful.Theprogram or setting cannot be installed because it does not have sufficient system permissions.
cab inf file:
Code:
[Version]
Signature = "$Windows NT$"
Provider = "Microsoft"
CESignature = "$Windows CE$"
[CEStrings]
CompanyName="Cloud-Castle Studio."
AppName="WM2005 Chs Fonts Installer"
InstallDir=%CE2%\Fonts
[DefaultInstall]
AddReg = RegSettings.All
CopyFiles = CopyToInstallDir.All
[SourceDisksNames]
1 = ,"ttf",,D:\smartphone\fonts
[SourceDisksFiles]
nina.ttf = 1
ninab.ttf = 1
MSSONG.TTF = 1
[DestinationDirs]
CopyToInstallDir.All=0,%InstallDir%
[CopyToInstallDir.All]
nina.ttf,,,0
ninab.ttf,,,0
MSSONG.TTF,,,0
[RegSettings.All]
HKLM,Software\Microsoft\FontLink\SystemLink,nina,0x00000000,"\Windows\Fonts\mssong.ttf,SC_Song"
HKLM,Software\Microsoft\FontPath,FontPath,0x00000000,"\Windows\Fonts"
help me,thanks![/b]

in HKLM\Security\Policies\Policies add DWORD key,"0000101b"=1
all ok!

InClose and my theme - please help

Hello,
I made my own ppc theme and when I'm using InClose mobile with "Background -> The current Theme" checked, it looks like in the attached picture.
vista.inf:
Code:
[Version]
Signature = "$Windows NT$"
CESignature = "$Windows CE$"
Provider = "Jimmy"
[CEStrings]
Appname = "Vista"
InstallDir = %CE2%
[SourceDisksNames]
1 = ,"vista",,vista
[SourceDisksFiles]
stwater_240_320.gif = 1
stwater_320_240.gif = 1
tdywater_240_320.gif = 1
tdywater_320_240.gif = 1
[DefaultInstall]
CopyFiles = CopyDir01
AddReg = Registry
[CopyDir01] ; (%CE2% : \Windows)
"stwater_240_320.gif",stwater_240_320.gif,0x00000400
"stwater_320_240.gif",stwater_320_240.gif,0x00000400
"tdywater_240_320.gif",tdywater_240_320.gif,0x00000400
"tdywater_320_240.gif",tdywater_320_240.gif,0x00000400
[DestinationDirs]
CopyDir01 = 0, %InstallDir%
[Strings]
reg_path00 = Software\Microsoft\Color
reg_path01 = Software\Microsoft\Today\Vista.tsk
[Registry]
HKLM,%reg_path00%,4,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,6,0x00000001,00,00,00,00
HKLM,%reg_path00%,7,0x00000001,00,00,00,00
HKLM,%reg_path00%,11,0x00000001,00,00,00,00
HKLM,%reg_path00%,12,0x00000001,00,00,00,00
HKLM,%reg_path00%,13,0x00000001,C0,C0,C0,00
HKLM,%reg_path00%,14,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,15,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,16,0x00000001,6C,AB,B0,00
HKLM,%reg_path00%,25,0x00000001,C0,C0,C0,00
HKLM,%reg_path00%,26,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,27,0x00000001,00,00,00,00
HKLM,%reg_path00%,28,0x00000001,FF,00,00,00
HKLM,%reg_path00%,36,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,37,0x00000001,6C,AB,B0,00
HKLM,%reg_path00%,38,0x00000001,00,00,00,00
HKLM,%reg_path00%,39,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,40,0x00000001,FF,00,00,00
HKLM,%reg_path00%,5,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_NavBarText_Highlight,0x00000001,FF,FF,FF,00
HKCU,%reg_path01%,Color_SoftkeyFlatCenter,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_TitleFlatCenter,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_TitleFlatDoneBtn,0x00000001,E5,49,30,00
HKCU,%reg_path01%,Color_TitleFlatDoneBtn_Highlight,0x00000001,9D,47,32,00
HKCU,%reg_path01%,Color_Highlight,0x00000001,B6,D5,E9,00
HKCU,%reg_path01%,Color_HighlightText,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_MenuText,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_CommandBarText_Highlight,0x00000001,00,00,00,00
Can anyone tell me, what's wrong? Thanks very much and sorry for my bad english...

I think its because you have created a orientation theme - inclose looks for tdywater.gif and as yours are named tdywater_240_320.gif & tdywater_320_240.gif it uses default windows one. Change your theme to a standard format and it will work.
btw with what software did you make the theme? And nice looking theme

I have it and maybe
Jimm98y.. i use inclose too and if im not mistaken you want that blue part to be taking off inclose correct.. well if you do you need to go to the inclose settings and in background just click none it will be white, but i dont know why when you click current theme its allways blue, as for user image its tuff to do that.. Hope that helps
Josh

I think its because you have created a orientation theme - inclose looks for tdywater.gif and as yours are named tdywater_240_320.gif & tdywater_320_240.gif it uses default windows one. Change your theme to a standard format and it will work.
Click to expand...
Click to collapse
OK. I'm going to try it but I hoped there is some registry key which can change it.
with what software did you make the theme? And nice looking theme
Click to expand...
Click to collapse
Thanks. I made it with notepad, paintbrush and cabwiz.exe, because the other programs (like themegence) looks too complicated and cannot offer such possibilities.
go to the inclose settings and in background just click none it will be white
Click to expand...
Click to collapse
Yes, I know about it, but I would like to have a "transparent menu". I tried to use my own picture in background, but it doesn't work in landscape because there cannot be set 2 pictures.

Thanks very much now it works fine. Here is the final version of this skin for anyone who is interested in:

How did you do it
Jimm98y.. How did you get to be transperant.. i tried reading the other messages but i cant get it.. coul d you help?

Re: How did you do it
Juicy J said:
Jimm98y.. How did you get to be transperant.. i tried reading the other messages but i cant get it.. coul d you help?
Click to expand...
Click to collapse
I used background files named tdywater.gif and stwater.gif, both in resolution 320x320, so the inf file looks like this:
Code:
[Version]
Signature = "$Windows NT$"
CESignature = "$Windows CE$"
Provider = "Jimmy"
[CEStrings]
Appname = "Vista"
InstallDir = %CE2%
[SourceDisksNames]
1 = ,"vista",,vista
[SourceDisksFiles]
stwater.gif = 1
tdywater.gif = 1
[DefaultInstall]
CopyFiles = CopyDir01
AddReg = Registry
[CopyDir01] ; (%CE2% : \Windows)
"stwater.gif",stwater.gif,0x00000400
"tdywater.gif",tdywater.gif,0x00000400
[DestinationDirs]
CopyDir01 = 0, %InstallDir%
[Strings]
reg_path00 = Software\Microsoft\Color
reg_path01 = Software\Microsoft\Today\Vista.tsk
[Registry]
HKLM,%reg_path00%,4,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,6,0x00000001,00,00,00,00
HKLM,%reg_path00%,7,0x00000001,00,00,00,00
HKLM,%reg_path00%,11,0x00000001,00,00,00,00
HKLM,%reg_path00%,12,0x00000001,00,00,00,00
HKLM,%reg_path00%,13,0x00000001,C0,C0,C0,00
HKLM,%reg_path00%,14,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,15,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,16,0x00000001,6C,AB,B0,00
HKLM,%reg_path00%,25,0x00000001,C0,C0,C0,00
HKLM,%reg_path00%,26,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,27,0x00000001,00,00,00,00
HKLM,%reg_path00%,28,0x00000001,FF,00,00,00
HKLM,%reg_path00%,36,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,37,0x00000001,6C,AB,B0,00
HKLM,%reg_path00%,38,0x00000001,00,00,00,00
HKLM,%reg_path00%,39,0x00000001,FF,FF,FF,00
HKLM,%reg_path00%,40,0x00000001,FF,00,00,00
HKLM,%reg_path00%,5,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_NavBarText_Highlight,0x00000001,FF,FF,FF,00
HKCU,%reg_path01%,Color_SoftkeyFlatCenter,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_TitleFlatCenter,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_TitleFlatDoneBtn,0x00000001,E5,49,30,00
HKCU,%reg_path01%,Color_TitleFlatDoneBtn_Highlight,0x00000001,9D,47,32,00
HKCU,%reg_path01%,Color_Highlight,0x00000001,B6,D5,E9,00
HKCU,%reg_path01%,Color_HighlightText,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_MenuText,0x00000001,00,00,00,00
HKCU,%reg_path01%,Color_CommandBarText_Highlight,0x00000001,00,00,00,00

Alpine WM6 knowledge base

Okay, Cotulla is expert, but I want to share some information I got with analyzis of rom.
Let it be Alpine wm6 knowledge topic.
Alpine processor is PXA272 (clocked 416 Mhz or 520 Mhz)
Alpine has 128 ram and 64 rom
ROM of alpine is parted as:
39 mbs of NK image (main rom)
25 mbs of Extended ROM
As it stay for now, I base on himalaya rom I know perfectly, so I copied partitions etc from hima.
To use hima base for alpine use this c# code
Code:
byte[] AlpineNK = System.IO.File.ReadAllBytes("Alpine.nba");
byte[] HimaNK = System.IO.File.ReadAllBytes("Himalaya.nba");
for (int i = 0x180000; i < 0x4BA2AE; i++) AlpineNK[i] = 0x00;
for (int i = 0x4BA2AE; i < 0x500074; i++) AlpineNK[i] = HimaNK[i];
for (int i = 0x500074; i < 0x1FFEEBA; i++) AlpineNK[i] = HimaNK[i];
for (int i = 0x1FFEEBA; i < 0x1FFF1FF; i++) AlpineNK[i] = HimaNK[i];
for (int i = 0x1FFF1FF; i < AlpineNK.GetLength(0); i++) AlpineNK[i] = 0x00;
try { System.IO.File.Delete("nk.nba"); }
catch (Exception e) { }
System.IO.File.WriteAllBytes("nk.nba", AlpineNK);
It generates nk.nba to be used in AK6 Alpine version, not released yet.
It has a fail, it use 32 mbs of rom and fill res with 0x00, because I didn't find a way to resize imgfs yet.
XIP resides at 0x180000 (ECEC string is at 180040, useful for xipport)
or on 0x040000
In original nk.nba w2k3 we find 2 main partitions with headers
Code:
800e966c - 800e96c0 L00000054 rom_01 header: dlls=01f601ff-02000000 phys=80040000-801729f0, 9 modules, 5 files, 1 copyentries ext=80042b54 ram=905c0000-94000000 cputype=000001c0 01f601ff
8060e82c - 8060e880 L00000054 rom_02 header: dlls=0154015d-015f4000 phys=80180000-8060faf4, 12 modules, 155 files, 0 copyentries ext=80042b54 ram=905c0000-94000000 cputype=000001c0 0154015d
I think I should try to put loader in 0x040000 instead of 0x180000
Hima use cputype 1c2, alpine use 1c0
Most similar devices with processor and xip are Magican, Universal and XDA Atom.
Magican is impossible to port here, but it is most similar.
Universal would work, but is use pxa270 istead of pxa272 processor, so some modifications would be needed.
I implemented AK6 to use with Alpine.
To enter bootloader manually (without EnterBL.exe) use this comination:
Press any D-Pad direction (without center) and reset with hole next to 21 pin slot.
I attach verbose analyze of Alpine newest 2k3 rom, it would be useful.
Share your info too.
BTW, Cotulla, if you are too busy to work on it continounsly, I can finish it with a little your help.
- Aeroflyluby

very big thank aroflyluby
aeroflyluby said:
Okay, Cotulla is expert, but I want to share some information I got with analyzis of rom.
Let it be Alpine wm6 knowledge topic.
Alpine processor is PXA272 (clocked 416 Mhz or 520 Mhz)
Alpine has 128 ram and 64 rom
ROM of alpine is parted as:
39 mbs of NK image (main rom)
25 mbs of Extended ROM
As it stay for now, I base on himalaya rom I know perfectly, so I copied partitions etc from hima.
To use hima base for alpine use this c# code
Code:
byte[] AlpineNK = System.IO.File.ReadAllBytes("Alpine.nba");
byte[] HimaNK = System.IO.File.ReadAllBytes("Himalaya.nba");
for (int i = 0x180000; i < 0x4BA2AE; i++) AlpineNK[i] = 0x00;
for (int i = 0x4BA2AE; i < 0x500074; i++) AlpineNK[i] = HimaNK[i];
for (int i = 0x500074; i < 0x1FFEEBA; i++) AlpineNK[i] = HimaNK[i];
for (int i = 0x1FFEEBA; i < 0x1FFF1FF; i++) AlpineNK[i] = HimaNK[i];
for (int i = 0x1FFF1FF; i < AlpineNK.GetLength(0); i++) AlpineNK[i] = 0x00;
try { System.IO.File.Delete("nk.nba"); }
catch (Exception e) { }
System.IO.File.WriteAllBytes("nk.nba", AlpineNK);
It generates nk.nba to be used in AK6 Alpine version, not released yet.
It has a fail, it use 32 mbs of rom and fill res with 0x00, because I didn't find a way to resize imgfs yet.
XIP resides at 0x180000 (ECEC string is at 180040, useful for xipport)
or on 0x040000
In original nk.nba w2k3 we find 2 main partitions with headers
Code:
800e966c - 800e96c0 L00000054 rom_01 header: dlls=01f601ff-02000000 phys=80040000-801729f0, 9 modules, 5 files, 1 copyentries ext=80042b54 ram=905c0000-94000000 cputype=000001c0 01f601ff
8060e82c - 8060e880 L00000054 rom_02 header: dlls=0154015d-015f4000 phys=80180000-8060faf4, 12 modules, 155 files, 0 copyentries ext=80042b54 ram=905c0000-94000000 cputype=000001c0 0154015d
I think I should try to put loader in 0x040000 instead of 0x180000
Hima use cputype 1c2, alpine use 1c0
Most similar devices with processor and xip are Magican, Universal and XDA Atom.
Magican is impossible to port here, but it is most similar.
Universal would work, but is use pxa270 istead of pxa272 processor, so some modifications would be needed.
I implemented AK6 to use with Alpine.
To enter bootloader manually (without EnterBL.exe) use this comination:
Press any D-Pad direction (without center) and reset with hole next to 21 pin slot.
I attach verbose analyze of Alpine newest 2k3 rom, it would be useful.
Share your info too.
BTW, Cotulla, if you are too busy to work on it continounsly, I can finish it with a little your help.
- Aeroflyluby
Click to expand...
Click to collapse
i dont know with your work (c# code),but i want to say thank to you for shared your knowledge with alpine ,i think this maybe can help Cotulla or some one that work with rom developing of Alpine

It's good to see, that you obviously like to work with your new used alpine.
Thanx to bruzzlee, for sharing his second device with you!
To luby: It was good to change the death sentence you got, for drowning your hima in corn flakes, to 99 years of rom-cooking!
Good luck!

Can the name of internal flashdrive programmatically found?

Hi,
I want to get out via a MortScript-routine the folder name of the internal flashdrive, e.x. \My Flash Drive. I wrote a routine that looks for all installed drives that are FAT/EXFAT formatted, but that down't help:
Code:
#TestDrivesFATFS.mscr
###########################################################################
#Searches all installed FATFS/exFAT drives except the one this script resides,
#because only those drives MioPocket can be installed on
###########################################################################
#
#Each filesystem is described in registry as
# [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\<MyProfileName>]
# "DefaultFileSystem"="<MyFileSystem>"
# "Folder"="<MyFolderName>"
Local()
#Obligatory coding as to be found in some MioPocket's scripts
Drive = "\" & Part(SystemPath("ScriptPath"), "\", 2)
#Test starts here
ExcludeDrive = Substr(Drive, 2)
DrivesFATFS = Array()
RegKey = "System\StorageManager\Profiles"
Idx = 0
#Walk the chain of profiles
ForEach variable In RegSubkeys("HKLM", RegKey)
ForEach value, contents In Regvalues("HKLM", RegKey & "\" & variable)
#Some newer CE devices know of exFAT format
If((value eq "DefaultFileSystem") AND (contents ne "FATFS") AND (contents ne "EXFAT"))
Break
EndIf
If((value eq "Folder") AND (contents ne ExcludeDrive))
Idx += 1
DrivesFATFS[Idx] = "\" & contents
EndIf
EndForEach
EndForEach
If(Debug)
ForEach drv in Array(DrivesFATFS)
Message(drv)
EndForeach
EndIf
Any help appriciated. TIA

It can be found in the Registry (at least in my WinMo 6.1... don't know if it's the same way in CE releases or other brands). Look in "HKLM\System\StorageManager\INAND" (or MMC instead of INAND...). The drive name is the "folder" string value).

Thanks for your reply. What I'm searching for is a hint how I can determine per software (MortScript), already having got ( with a piece of code as postet above ) a list of drive-names, which of those is the Storage Card and which is the Flash Drive, not by default knowing of the drive-names, because those differ from device to device.
Running the code above on my device (Medion PNA with CE 5) returns among others the names \Storage Card and/or \My Flash Disk, but this doesn't really help me a lot.

Thanks to all for your interest.
=> SOLVED IT BY MYSELF!
If you are interested in how I did it, here the code to detect the name of SD(HC), MMC, etc card:
Code:
ErrorLevel("warn")
sd = @FindSDDrives()
ForEach drv in Array(sd)
Message(drv)
EndForEach
Sub FindSDDrives()
Local()
SDProfiles = Array()
SDDrives = Array()
SDDrives2 = Array()
#All CE filesystem profiles related to Storage Cards are listet under
#[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\******]
#E.x. MMC_Class, SDMemory_Class
idx = 0
RegKey = "Drivers\SDCARD\ClientDrivers\Class"
ForEach sdcard In RegSubkeys("HKLM", RegKey)
ForEach value, contents In RegValues("HKLM", RegKey & "\" & sdcard)
If(value eq "Profile")
idx += 1
SDProfiles[idx] = contents
EndIf
EndForEach
EndForEach
#Each CE filesystem is described in registry as
# [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\<MyProfileName>]
# "DefaultFileSystem"="<MyFileSystem>"
# "Folder"="<MyFolderName>"
# "Name"="<MyName>
idx = 0
RegKey = "System\StorageManager\Profiles"
ForEach profile in Array(SDProfiles)
ForEach value, contents In RegValues("HKLM", RegKey & "\" & profile)
If(value eq "Folder")
idx += 1
SDDrives[idx] = "\" & contents
EndIf
EndForeach
EndForEach
Clear(SDProfiles)
#Remove duplicates
idx = 0
idx2 = 0
prevdrv = ""
ForEach drv in Array(SDDrives)
idx += 1
If(SDDrives[idx] ne prevdrv)
idx2 += 1
prevdrv = SDDrives[idx]
SDDrives2[idx2] = prevdrv
EndIf
EndForEach
Clear(SDDrives)
Return(SDDrives2)
EndSub

Thanks
jwoegerbauer said:
Thanks to all for your interest.
=> SOLVED IT BY MYSELF!
If you are interested in how I did it, here the code to detect the name of SD(HC), MMC, etc card:
Click to expand...
Click to collapse
Usefull for XDA_UC build in like EnergyROMs. Don't try the German ROMs because of copying files from "Storage Crad" vs. "Speicherkarte" . Now thats solved.
Thanks.

[Q] [HELP] Rename a folder by current date via mortscript

How can I rename a folder or create a new one, with naming the current date via mortscript?

Try this
Code:
createDir=1 #0 = FALSE, 1 = TRUE
dirRoot="\blahblah"
unixTime=TimeStamp()
readableTime=FormatTime("Y-m-d H:i:s",unixTime)
If(createDir)
#create directory, if not still there
If(NOT DirExists(dirRoot\readableTime))
MkDir(dirRoot\readableTime)
EndIf
Else
#rename directory, if not still done, i.e. move all files to new directory
If(NOT DirExists(dirRoot\readableTime))
MkDir(dirRoot\readableTime)
EndIf
Move(dirRoot\"*.*",dirRoot\readableTime,1,1)
#delete (now emptied) old directory
DelTree(dirRoot)
EndIf