Database Users

need a bit of help, how to connect to my pc using athena??

Ok i know i already saw the answer of this somewhere but i already looked for it and i just cant find it.
I have a athena and i would like to remotely connect to my pc that is on my office and use it remotely, i know there are programs to do this i just cant get the right words to find them.
can anyone help me out on this?
thankx

** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done

irus said:
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
Click to expand...
Click to collapse
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.

apd said:
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
Click to expand...
Click to collapse
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.

ltxda said:
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
Click to expand...
Click to collapse
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.

leoni1980 said:
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
Click to expand...
Click to collapse
Of course, this only applies if you are not behind a corporate firewall using NAT or other dynamic IP behind the firewall. Also, if it is a corporate network, opening port 3389 may be (a) very difficult to convince your IT dept to do and (b) not very secure!
If one iof the dynamic dns systems works for you, you might try dyndns.org

i've looked everywhere, seriously. -remote desktop

any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!

ok i got it going.
first go to the computer you want to connect to and go to control panel / system
click on remote, enable remote users
go to start menu, run. type cmd
in command write "ipconfig /all"
take note of your ip address
on your phone go to remote desktop,
computer = your ip address
username = (go to startmenu, control panel, user accounts) use one of those names.
password = blank unless you have a password.
domain = i left blank.
connect full color unless it doesnt work for you
if you can connect and you get a password error
type the error you get inot google and you should get a fix as your first link.
try that.
blam, remote desktop, it's awesome.

Nice how-to...
this is the most succinct tutorial on how to do this that I've seen. I'm still having trouble, though. I get the "Cannot connect. Likely reason are: 1 the remote comupter is not set up for this. 2. Reached the maximum number of connections. 3. A network error occurred while connecting."
I have set up the XP PC, & taken down all firewalls. I only have one user account and it has a password. I've even tried using Hamachi with one of their VPN ip addresses (awesome and free for pc2pc). I 've combed trhough my router settings too, and tried to clear everything there, too. I can RD from an XP laptop, so ti seems to be something on the unit, to me. I've also setup file sharing w/ Total Commander (it's served my purposes amply).
I really have googled & googled & googled. If anyone has any idea what is going on, I'd be grateful for some ideas.

Have you enabled the RDP on the host computer?
Right click my computer
Properties
Remote
Then enable allow user to connect remotely.

Will only work on XP Pro, or Vista if you choose to allow older clients which they scaremonger you against by saying it's less secure.

Danke!
I've been scared away from Vista for the usual "new" OS reasons, but perhaps it's getting to be time for me to haul my old conservative back-end into the modern world.
Thanks so much for taking the time!
(and to Biohead: yes, I followed the instructions I lauded so vehemently.... ???)

you're running vista?
and you haven't been able to connect still, right?
sorry i could walk you through xp, but man vista sucks, i wouldn't touch it with a 10 foot pole.

i'm setting up remote desktop on my iphone
hahaha totally referred to this guide

and it sucks, so i'm sticking with vnc
man, i miss my exec/universal

dutchschultz said:
any detailed how to guide?, i can do it, i'm fairly tech savvy, so i just need to kneed out a few things. maybe if you caould start from the beginning and i can see where i went wrong.
logmein.com works, but i want something more personal, just bewtween the computer and my phone. somerthing that looks good and scales full screen preferably.
please guys?, point me in the right direction.. all the posts just keep saying to search and there's lots of info, but there's no step by step guide.
thanks guys!
Click to expand...
Click to collapse
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524

orb3000 said:
Hope this helps
http://forum.xda-developers.com/showthread.php?t=366312
http://forum.xda-developers.com/showthread.php?t=294524
Click to expand...
Click to collapse
you, my friend, are awesome

A possible solution for those of us on T-Mobile's standard web n walk
Sorry to resurrect this thread, but I thought I'd post my experiences here in case anyone else (like me) searches for a solution to enabling RDP on T-Mobile (UK at least).
I was having the same problem with remote desktop, it saying that the server was not available. I phoned up T-Mobile's helpdesk as recommended here and after getting past first line support (who didn't know what remote desktop was, and tried sending new connection settings to my phone to resolve the issue) I got through to someone who knew what they were talking about. Turns out that I'm on T-Mobile's "basic" or "handset-only" web-n-walk package, and it's not possible to use RDP on this. I assume they block the relevant ports. They told me that I could pay an extra fiver a month to upgrade to a version of web-n-walk which can handle RDP.
Well I told them I would think about it, but instead tried to find a way around it as the one or two times I need to use RDP are certainly not worth a fiver a month. My solution is probably only suitable for the more techy of us, but without much work and with no prior experience I managed to set up a SSH tunnel using FreeSSHd as a server running on my windows server (although a normal windows box should work fine - http://www.freesshd.com/) and zaTunnel as a client on my phone (http://www.zatelnet.com/zatunnel/main.php). Both programs are free.
Basically my phone takes all RDP connections and tunnels them over SSH to my windows server, which then turns them back into RDP connections. T-Mobile have no idea I'm using RDP, and if they block the SSH port in the future I can always change FreeSSHd to run on port 80 (for web). This will also work for other protocols T-Mobile might be blocking (FTP springs to mind).
Just thought I'd post this in case anyone was in my situation of needing RDP on their standard web'n'walk.
Edit Sorry posted this in the wrong thread! Will leave this post up however just in case someone finds it useful

echolock
Many thanks for the above have been searching everywhere for a fix to this. I am the same as you T Mobile (UK) and can't connect.
Could you give some additional advice as how you got the RDP to work.
For the record I can connect by Wi-Fi and by using a PAYG sim from a different carrier. However, I am on a contract with T Mobile and don't want to carry a different sim just to use the RDP.
I have installed both apps. I can make a connection from zaTunnel on Port SSH:24 to the freeSSHD server (SSH - listening on port 24). Other than adding a User and changing the default port to 24 there are no other changes I have made in freeSSHD.
Under the connections tab in zaTunnel I have left Network: Automatic with the other settings relevant to make a connection.
Under the ports tab of zaTunnel I have
LP> 3389,
IP/URL . IP of the desktop I want to connect to of 192.168.1.10
>RP 3389
When I the start the Remote Desktop app under my Windows Mobile 6.1 it indicates connecting the fails as before.
Also forgot to mention freeSSHD is running on the desktop I want to connect to.

Sure thing.
When you run Remote Desktop under Windows Mobile, make sure you connect to "localhost" NOT to the IP of the desktop you want to connect to.
Your other settings seem correct to me.
To attempt to explain a little, basically what happens is as follows. For simplicity's sake I will have three machines, your phone, your SSH server and your RDP server (although the latter two can be the same).
On your phone:
1) Remote Desktop connects to localhost on port 3389.
2) zaTunnel is listening on localhost on port 3389. It echos all commands sent to this port out on port 22 over your cellular connection to your SSH server, also providing details of your RDP server and port.
On your SSH server:
3) FreeSSHd receives the commands sent over port 22 and is told by zaTunnel to convert them to commands sent to your RDP server using port 3389.
On your RDP server:
4) Remote Desktop receives a normal RDP request over the normal port from your SSH server.
5) Responses are sent to your SSH server.
On your SSH server:
6) FreeSSHd receives the RDP responses, and sends them back to your phone over port 22.
On your phone:
7) zaTunnel converts the commands sent over port 22 back into RDP commands sent over port 3389.
8) Remote desktop receives a response from zaTunnel and thinks it's connected directly to an RDP server on localhost. In actuality it's connected to your RDP server using an SSH tunnel provided by zaTunnel and FreeSSHd.
Hope this makes sense, I'm not very good at explaining this!

Ah found another problem. The IP of your desktop you say is 192.168.1.10 - this is a local IP address so will only work on your local network.
Go to a website like http://whatismyipaddress.com/ from the machine you run SSHd on to find out what your current "external" IP address is. Bear in mind that most home broadband connections have a "dynamic" address which is allocated to you and might change from time to time - you can always use something like http://www.dyndns.com/services/dns/dyndns/ to set yourself up with a static hostname, and run a program on your machine which updates your hostname with the correct IP address every time it changes. Some routers have this functionality built in.

Thanks for the quick response and explanation.
Between posting and reading your reply I had worked out the RDP app needs the localhost or the IP 127.0.0.1.
I had come back here to post, so others would know in future.
Your other point you raised about the desktop IP. I have used this only in the ports tab on zaTunnel. The connection tab has a proper mydomainname.com address. (Provides email and a webmail interface).
Anyway, can connect now and thank you again in solving this for me. (If your in Leeds I will buy you a beer).

Ah yeah the 192.* address would work on the ports tab, fair enough. Might be worth pointing out if others read this that this is only the case if the machine you're trying to RDP to is on the same local network (or the same machine) as the machine you have FreeSSHd running on.
But good to hear you got it working Now hopefully T-Mobile won't cotton-on and decide to block port 22 too...

Messenger using port 80?

Is there such a thing?
Im using unlimited internet plan for port 80 which means i can surf over the net for html pages with no additional charge.
Now my question is if theres a messenger that uses that port so i dont must wifi or data plan to use it?
Thanks.
eran.

im not sure but you could try ebuddy, or any other html based messenger

if you have access to a vpn, ssh-server or a proxy server you can tunnel your connection through them which is supported by almost every mobile messenger client.

hi,
use open vpn, a good solution to create and use a tunnel via your pc connection, than your pc will be the server that you can connect on with your 3g+ connection.
i tried that today with success, and used msn messenger and push mail, all with my wap Sfr connection, that use the port 80.
use google for research, and send a message if you need help....i'll try even if my english is not perfect....but think i can help.

benastuce said:
hi,
use open vpn, a good solution to create and use a tunnel via your pc connection, than your pc will be the server that you can connect on with your 3g+ connection.
i tried that today with success, and used msn messenger and push mail, all with my wap Sfr connection, that use the port 80.
use google for research, and send a message if you need help....i'll try even if my english is not perfect....but think i can help.
Click to expand...
Click to collapse
The same thing happens in portugal with the Carriers! only html traffic is allowed. Good thing there is this workaround!
going to do that now..

benastuce said:
hi,
use open vpn, a good solution to create and use a tunnel via your pc connection, than your pc will be the server that you can connect on with your 3g+ connection.
i tried that today with success, and used msn messenger and push mail, all with my wap Sfr connection, that use the port 80.
use google for research, and send a message if you need help....i'll try even if my english is not perfect....but think i can help.
Click to expand...
Click to collapse
i dtried to look for howto's in order to understand how it works..
i didnt really got it.
i'd be glad if you explain it here shortly,
it will be available for the rest of the guys either

you can use a simple ssh server for tunneling, too. that's more simple than the configuration of a whole vpn.
First you have to have con trol over such a server (I use a vserver of mine), than have the server listen on not only the ssh port but also a http one(if you have a webserver too running in the ssh server host, you maybe can't useport 80, but luckily my provider has also port 8080 open, because it is often used for http proxies).
now download pocketputty from the internet.
in the session tab enter yout servers ip and choose ssh, but change the port to 8080.
now go to the tunnel tab (as there are many tabs, maybe you cant see it at first, but it's there).
now you enter a free port on your mobile in the source field (I use 50 for example), the destination is the ip of your ssh server, and check dynamic. now click add.
then change back to the session tab, give you settings a name in the field stored sessions and klick save.
now the settings are stored and you can start the connection by double klicken on the name of your session that is now listed unter (Default Settings) in the sessions list.
The ssh connection will open and you will to have to log you into the ssh server, with a user (the name is not important, and it needn't to be the super user ;-) ), that has a shell.
when you're logged in open your mobile icq client. now go to the proxy settings of it and choose socks as proxy server type, the proxy address is localhost and the port the one you chose in the source field in the ppcoektputty tunnel tab. (so putty is your local socks proxy server).
now you should be able to connect thorugh the ssh tunnel to icq.
if you use your mobile sionmetimes as modem for a laptop, the trick works very similiar with the normal putty and a non mobile windows ;-)

bcom said:
you can use a simple ssh server for tunneling, too. that's more simple than the configuration of a whole vpn.
First you have to have con trol over such a server (I use a vserver of mine), than have the server listen on not only the ssh port but also a http one(if you have a webserver too running in the ssh server host, you maybe can't useport 80, but luckily my provider has also port 8080 open, because it is often used for http proxies).
now download pocketputty from the internet.
in the session tab enter yout servers ip and choose ssh, but change the port to 8080.
now go to the tunnel tab (as there are many tabs, maybe you cant see it at first, but it's there).
now you enter a free port on your mobile in the source field (I use 50 for example), the destination is the ip of your ssh server, and check dynamic. now click add.
then change back to the session tab, give you settings a name in the field stored sessions and klick save.
now the settings are stored and you can start the connection by double klicken on the name of your session that is now listed unter (Default Settings) in the sessions list.
The ssh connection will open and you will to have to log you into the ssh server, with a user (the name is not important, and it needn't to be the super user ;-) ), that has a shell.
when you're logged in open your mobile icq client. now go to the proxy settings of it and choose socks as proxy server type, the proxy address is localhost and the port the one you chose in the source field in the ppcoektputty tunnel tab. (so putty is your local socks proxy server).
now you should be able to connect thorugh the ssh tunnel to icq.
if you use your mobile sionmetimes as modem for a laptop, the trick works very similiar with the normal putty and a non mobile windows ;-)
Click to expand...
Click to collapse
I really got lost...
I couldnt find application for ssh server which i understand how to work with..
i wouldnt mind some help...

first you need a server in the internet for that, because you need an endpoint for the ssh connection.
as i said i have a linux server under my control. if you don't have an internet server or access to one with a ssh account, which I doubt reading your post, this solution isn't maybe the best for you, because have such a server costs about 8-10 euro or dollars a month, and as I need it for other things to, this costs are ok for me.
an alternative maybe would be an vpn account by a vpn provider which costs less, but then the way to get it to work is a bit differnet.

I just thought I could set up such a server on my own computer...if possible.
I did understand i can do that, but i didnt understand how
Nevermind, I will try other solutions..
thanks

hmm, this would be possible, but your computer would have to be reachable under a fest address from the internet (which oculd be done using dyndns). Are you using windows or linux in your machine?

Usually my computer is online all the time, so it wouldnt be a problem
And using a dynamic hostname with dyndns is what I thought about at first place.
my pc is running windows

eranyanay said:
i dtried to look for howto's in order to understand how it works..
i didnt really got it.
i'd be glad if you explain it here shortly,
it will be available for the rest of the guys either
Click to expand...
Click to collapse
hi,
i made exactly this http://www.jb69.com/index.php/post/2008/01/05/Creation-dun-serveur-VPN...but its in french....hope it helps..but i can always answer if any question or translation...see you.
begin to craete a vpn server on your pc first...try to make it run using the config file...than we'll see....beleive me i didn't get any help and i'm quite a noob in network connection...but make it work...

benastuce said:
hi,
i made exactly this http://www.jb69.com/index.php/post/2008/01/05/Creation-dun-serveur-VPN...but its in french....hope it helps..but i can always answer if any question or translation...see you.
begin to craete a vpn server on your pc first...try to make it run using the config file...than we'll see....beleive me i didn't get any help and i'm quite a noob in network connection...but make it work...
Click to expand...
Click to collapse
Thank you for your help.
I used that guide and Im not sure about the last stage, when creating the client.ovpn file,
in the line 'remote' - i leave it xx.xx.xx.xx ? They didnt mention different...
And after that, How do I config the vpn connection on my mobile? I need a step by step in this stage because I dont want extra-charging....
Thanks

eranyanay said:
Thank you for your help.
I used that guide and Im not sure about the last stage, when creating the client.ovpn file,
in the line 'remote' - i leave it xx.xx.xx.xx ? They didnt mention different...
And after that, How do I config the vpn connection on my mobile? I need a step by step in this stage because I dont want extra-charging....
Thanks
Click to expand...
Click to collapse
instead of XX.xx.xx.xx you must fill your internet IP thaht you can see here http://www.ip-adress.com/, and may be you have to change port to 443 instead of 80 in config files....that works with me,dont forget port forwarding in your router if you have one, mens you have to redirect incoming connection on port 80, and 443 to the pc that have openvpn.
but first of all you have to make your server work on the pc, some times you have to kill openvpn activites making CTRL+ALT+Del, to make open vpn GUi work and the vpn connect....see for next episode.

Ok,
im kind of stuck again....
I configured the vpn program and did everything by the guide,
Now i need to add a vpn connection to my regular 3g settings?
I did that, with my IP address, and it asks for user and password
i assumed its tcp-client like in the config file,
and password one of the keys in key.txt file..
but it doesnt work.
or i didnt do it right.

eranyanay said:
Ok,
im kind of stuck again....
I configured the vpn program and did everything by the guide,
Now i need to add a vpn connection to my regular 3g settings?
I did that, with my IP address, and it asks for user and password
i assumed its tcp-client like in the config file,
and password one of the keys in key.txt file..
but it doesnt work.
or i didnt do it right.
Click to expand...
Click to collapse
So, when you launch open vpn on your PC, with the GUI (the incon of open vpn on the bureau), do you have the little yellow incon down right your pc screen and a message of connection success....you must first of all secceed to make your vpn work...after for the pocket pc its really nothing.....
PS: the client config must be in the config folder of your ppc with the key....personnally i made a copy of the key in the base folder of the device cause sometimes the key is not detected in the config folder.
and important to set your connection on "my work network" not wap in the avanced connections configuration.....but tell you make a seccessful vpn connection first and for the ppc its will be a joke...

benastuce said:
So, when you launch open vpn on your PC, with the GUI (the incon of open vpn on the bureau), do you have the little yellow incon down right your pc screen and a message of connection success....you must first of all secceed to make your vpn work...after for the pocket pc its really nothing.....
PS: the client config must be in the config folder of your ppc with the key....personnally i made a copy of the key in the base folder of the device cause sometimes the key is not detected in the config folder.
and important to set your connection on "my work network" not wap in the avanced connections configuration.....but tell you make a seccessful vpn connection first and for the ppc its will be a joke...
Click to expand...
Click to collapse
and finally don't set any vpn network on your ppc just install open vpn for ppc, i gave you the soft link...thats you need to set later....dont touch anything in your connections sittings except to set your connections on "my work network when you use vpn"....CARAY....
I'll come back for next episode....see you

benastuce said:
and finally don't set any vpn network on your ppc just install open vpn for ppc, i gave you the soft link...thats you need to set later....dont touch anything in your connections sittings except to set your connections on "my work network when you use vpn"....CARAY....
I'll come back for next episode....see you
Click to expand...
Click to collapse
Ok, i feel like it comes to an end...
the vpn server on my pc is working, the application openvpn.exe is running in the background and i do have that network enabled and running.
I found and installed open vpn for ppc,
its a bit annoying it cant run on a window and that its running on the background screen, meaning my touchflow (im using htc diamond) is hiding it, so i need to disable the touchflow when i need to configure the app.
(maybe solutions?)
now i need to copy the configuration files and the key file i have in the config folder of the computer to the ppc folder?
And what next?
Thanks

eranyanay said:
Ok, i feel like it comes to an end...
the vpn server on my pc is working, the application openvpn.exe is running in the background and i do have that network enabled and running.
I found and installed open vpn for ppc,
its a bit annoying it cant run on a window and that its running on the background screen, meaning my touchflow (im using htc diamond) is hiding it, so i need to disable the touchflow when i need to configure the app.
(maybe solutions?)
now i need to copy the configuration files and the key file i have in the config folder of the computer to the ppc folder?
And what next?
Thanks
Click to expand...
Click to collapse
So....great...now you have to copy the key.txt in the ppc config folder....with the client config.opvn(2 files), i learned somewhere yhat you have to copy the key in the main ppc directory also...i did it....see this video on this site....that can help much http://www.psykokwak.com/blog/index.php/2007/12/08/41-rendre-le-forfait-sfr-illimythics-vraiment-illimythics....give feed backs ...i'm here tonight...

remote desktop mobile need help

ok so i have a htc snap and i want to remote desktop i have a linksys router and have configured the routr for port forwarding i still cant connect i really need some help

Hy,
what software do you use?
VNC or what else?

its remote desktop mobile RDM it came on my htc snap

What port have you forwarded, and to what IP?
How are you trying to connect, Wi-Fi, 3G etc?
What IP address are you trying to connect to?

I use RDM all the time. I couple it with "Hamachi Mobile" which is a virtual private network VPN app. I log in with Hamachi, it gives me an IP, and I copy/paste whatever PC's IP i want to connect to in RDM... simple as that
Works very well on my Fuze with 3G.

im using port 3389 forward to my computer ip the router gives it i try logging in using my ip addy i get from websites that tell you your ip addy like ipchicken.com but today i went to canyouseeme.com to check port and cant get thru i still am not sure whats going on im very frustrated any help would be appreciated

@MOD
Can we get this moved to the Q&A forum?
I've been having a heck of a time getting it to work also... I would love to see the help on this question!

kliptik said:
@MOD
Can we get this moved to the Q&A forum?
I've been having a heck of a time getting it to work also... I would love to see the help on this question!
Click to expand...
Click to collapse
Ditto...
And now another useless line... as it seems you cannot simply post the word ditto in your message....

...
why does someone always have to try n start something or say some**** bout wut others say.. grow up if u dont have the answer or can provide help i need with dont say anything. but anyways .. can anyone help me with this or what... kdawg

turn off the pc firewall and make sure the user has rdp rights.

ive tried that

this is mainly for win7, but it may help
http://forum.xda-developers.com/showthread.php?t=533664
goodluck

FWIW, I use a program called vncviewer on my Omnia and it works fine. Goes directly to the server seat ip address and I take over that computer. HTH

Make sure in system properties you have checked allow connections from computers running any version of remote desktop and you may need to password protect you computer.

To get real answer just go to ppcgeeks.com this sites has too many annoying people
But what you need to do is go to your linksys page 192.168.1.1
o To Application And Gaming
On the port type in 3389 or start and 3389 for end protocal both and to find out your IP Go To Start - Search Box - Type cmd - Click It - Type "ipconfig" With Out The " " The IPv4 is your IP - Then Click Enable
On Your Phone go to the app
For Computer type in the IP address just got from IPv4
Username of your computer and password of your account
EDIT -- Your problem is you got the wrong IP don't use that IP use the one i showed you on the steps above it should be something like 192.168.*.***
This also helps
http://www.youtube.com/watch?v=iCs4GQma7IQ
But i recommend using realVNC 100x better and with Remote Desktop Mobile you can't use your PC while using it
VNC cost money but if you want a free version just send me a PM
Also if your using vista or Windows 7 its temp. looses your theme when you come back on thats why i use VNC less hassle
Hopes this help remember go to ppcgeeks for answers

try out logmein.com if you have WInMo 6.5 you need to switch the IE back to the old one, its still there you need an app called IEFix.
From IE only:
https://secure.logmein.com/US/pda/Default.asp
Anywayz I love LOGMEIN cuse I can connect to my web servers/home servers and pc's from the same list. and I can monitor when something is offline... RDP and VNC seem faster to navigate, RDP being the fastest, duh?

Configuring an FTP App...

...like 'AndFTP' & 'SwiFTP'. Can someone please be so kind as to post tutorial? I am using my computer through a Cordless router. I thought I saw a post here about a similiar app but cannot seem to find it. Thanks.
I just installed SwiFTP. Does anything else need to be installed on the computer? I am already using a FTP program on my Win Vista. I just installed it on the phone and typed in the username and password that I made up, but how to see start seeing the files on the computer? I see the app is running at the top of the black banner.

some cell phone carriers filter port 21 the default port for FTP
so you might not be able to use them
i had to change it to another port
what are you trying to do with the FTP?
you need a FTP client if you want to download stuff
you don't need a FTP server on your phone

Thank you. I would like to access my computer from my phone or/and vise versa. I read somewhere where someone is doing just that. So which FTP client app do I need?

the 2 you mentioned are pretty much the best at the moment
but none of them supports soft ftp which is more friendly with proxy and firewalls setup by the phone carriers
you just need to type in the address of your computer, and the port of your ftp server at home, then you can connect to it
make sure you use a port that is not blocked

Thank you. How do I find the FTP address on my computer? I am on a wireless router.

you need something like no ip or dynDNS
and also setup your router to allow traffic through the port you want

OK, thanks but you mention setting up the router, which is something I cannot do. I had it installed by someone else. You mentioned my computer's IP. Again, I ask, how do I find my computer's IP?
I wish there was a step-by-step somewhere on the net to install and setup this thing.

if you can not configure your router, then it will not work
you can get your ip by using the software from noip and dynDNS as mentioned above