Database Users

ActiveSync Over WIFI

ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers

Yes, sure you could do it! Just make sure ActiveSync Connection settings on your desktop PC include Ethernet (right click on ActiveSync icon on the taskbar, choose Connection Settings and click on Allow network). Then, run ActiveSync on XDA-II and choose same 'synchronise via Network' setting - there is one on the 'Advanced' tab I think (can't say exactly, as my wife plays Lines on it right now ) - just type in your PC NETBIOS name (I guess it will be there already if you connected via USB before). I've tried it and it worked straight away (although takes few secs more to connect).
fishmedia said:
ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers
Click to expand...
Click to collapse

YOU BEUT ! I'D KISS YOU ... if
1. you were female
2. you were good looking
3. you were in close vacinity!
I had to run active sync, go to tools > Options > Server
And add "//myname" and untick SSL
However, my WIFI network card is set to MOBILE WEB GPRS (for IE and MSN, inbox etc) and it wanted WAP network GPRS so tried to dial up.
I changed the WIFI card to be WORK instead of INTERNET and it worked great.
Not sure if I have WORK and INTERNET set up correctly, it is basically how it came setup for GPRS access. But I don't mind changing it over now and then unless someone knows a better way?
(interesting that I managed to do an o2 Active update via the WIFI card! and not WAP GPRS - something I can't do while connected via USB? but can surf via USB )
Anyway... RESULT ! cheers

Well, obviously not female (while nothing is impossible in modern world - you could change sex, not only ROM version in your XDA ). As for the Wi-Fi card setup - it's quite simple, you'd better set it to 'Work' always unless you are connecting from Starbucks, and then change properties of 'work' connection, checking 'Connects to Internet' box and entering your proxy address. All these 'ISP' and 'Work' settings seemed to be pretty confusing to me first time until I understood how it works. You could not browse network through an USB cable (a mystery to me, since it's a normal PPP connection!), so Wi-Fi is probably the best option for all tasks - synchronisation, browsing etc.

Thanks for your help, I'll have a play

Wirless modem dont works

Hi
I have problem with trion and wirless modem...
i open in programs->wirless modem---
select USB port and do start.
Connect the trion on usb
but not append... The PC dont see any modem or new found new hardware wizard dont appear...
so in modem i dont have the tynt or trion...
what can i do?
thx

SAme here. It's a known issue

Im thinking to try:
Mobile stream USB Modem for PPC.
Somebody have test it?

IM getting the same thing now. If this is a known issue, and this was like 3 months ago is there any more news on this? Its becoming a right old pain in the backside for me right now!

I have two hermes, both with the same problem. I connect using dial up (bluetooth) but 300 kbps instead of 800

I can connect just fine over IrDA when using GPRS. I don't have bluetooth on my laptop, but I guess the transfer rate over bluetooth is to slow for a fullspeed connection. I can't test that either: I have the low-budget option Pocket Internet Total from T-mobile which is downgraded to 64kbps over UMTS.
For using fullspeed UMTS (3G) even HSDPA, I would recommend using the USB connection.
Two things that can make trouble:
a) I found was that when using the USB cable, I had to disable the automatic connection some programs try to make (such as direct push)
b) I used COM8 for my bluetooth gps: after setting the gps to com0, I could connect without any problem
I read in some thread that you had to disable the advance network features over USB but as far as I can tell that only limits the speed over usb (my guess: USB 1.0 (1.1) in stead of 2.0)

I have a tytn and it works great, I get 3g speeds between 900 and 1300.
1) Plug the usb cable into your pc
2) Make sure you have activesync USB connection disabled
3) Disconnect your gprs or 3g connection (this is real important)
4) Activate the wireless modem app, start connection
5) make sure your gprs/3g connection is inactive
6) plug your pda into the usb cable
7) pc recognizes the wireless modem
8) install driver
9) Create dial up to *99# or whatever your carrier uses
10) Again make sure your gprs/3g connection is inactive
11) dial using your dialup shortcut
after the first time, all you have to do in make sure your gprs/3g connection is disconnected, start the wireless modem app, plug into your usb cable, dial the *99# using your wirelss modem dialup shortcut
I have it working on both Windows Xp and Windows Vista...It is a great backup to my local internet connection and it is very easy to use

Pardon me if there is a difference, but on my Hermes to use its internal data connection as the bearer you have to use *99# (NOT #99*) as the number to dial when configuring the dial-up connection in Dial-Up Connections.
When I tried it (several times) on my XP laptop, it was almost childishly simple: regardless of whether the phone was already plugged in via USB or not, just load the wireless modem app, set the APN to general.t-mobile.uk, hit Start and bam: I wait for it to initialise (the lights in the application window light up to show connection and data, and once those show up just hit dial. No username, no password, Robert's your mother's brother. Worked every time I tried it.
Using a T-Mobile UK-branded Hermes fwiw.

eagle 1 said:
I have a tytn and it works great, I get 3g speeds between 900 and 1300.
1) Plug the usb cable into your pc
2) Make sure you have activesync USB connection disabled
3) Disconnect your gprs or 3g connection (this is real important)
4) Activate the wireless modem app, start connection
5) make sure your gprs/3g connection is inactive
6) plug your pda into the usb cable
7) pc recognizes the wireless modem
8) install driver
9) Create dial up to *99# or whatever your carrier uses
10) Again make sure your gprs/3g connection is inactive
11) dial using your dialup shortcut
after the first time, all you have to do in make sure your gprs/3g connection is disconnected, start the wireless modem app, plug into your usb cable, dial the *99# using your wirelss modem dialup shortcut
I have it working on both Windows Xp and Windows Vista...It is a great backup to my local internet connection and it is very easy to use
Click to expand...
Click to collapse
where do I get the driver for the 8525 to work as a modem?

WTE said:
where do I get the driver for the 8525 to work as a modem?
Click to expand...
Click to collapse
off the cd that came w/ your 8525
it tells you how to install it in your user manual.

berdinkerdickle said:
off the cd that came w/ your 8525
it tells you how to install it in your user manual.
Click to expand...
Click to collapse
the only CD i have that came in the box is the one that gives you ACTIVE SYNC and OUTLOOK.
Where online can I get the drivers?
My problem is my computer is not recognizing this phone as a modem.

WTE said:
the only CD i have that came in the box is the one that gives you ACTIVE SYNC and OUTLOOK.
Where online can I get the drivers?
My problem is my computer is not recognizing this phone as a modem.
Click to expand...
Click to collapse
Why not read the Hermes wiki for some very usefull information:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
The hermes wiki Faq http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs would have pointed you to a link to download the htc wireless modem driver:
http://www.box.net/public/jytpxq47nk
or search google for HTC Wireless Modem download
and you would have found instructions at
http://www.theunwired.net/?itemid=1656&catid=80
Good Luck....

is it the same steps througt bluetooth ? I would have to make modem for my Pc throught BT.

Hi, tried to connect to my WIFI router by WPA with TKIP Encryption, but in TYNT isn`t any settings like that. Its availalbe just WEP.
Is any workaround? New driver for wifi or anything?
THX

use trinity as modem

I tried to use Trinity as a modem and did not manage to make this work.
I connect the usb cable. Start ISharing program on pda. Click conect. Says connected. 3G connection works. However the laptop is not connected to the internet.
Bluetooth also does not work. I can't find a way to create a PAN as they call it.
I would appreciate any suggestions as the manual is not clear on this topic
edit: i start internet sharing on my pda. i choose bluetooth. click connect. it says: Device setup finished. On the PC connect Bluetooth PAN.
On the PC i find my device. Find available services. Double click on 'Network Acces Point on Trinity'. I get a message that the computer is connecting and then an error: The Network Access connection failed: Could not connect to the remote device'
edit2: finally solved it.
I had to enter advanced bluetooth config on laptop. Under 'network access' properties I selected 'allow other devices to create a private network with this device'. Now it works.

hi,
i had the same issue, using bluetooth, but it´s the same, i guess.
you need to connect the pda with the pc, and when you get the connection, you go to the program menu in the pda, and select in the submenu connetions usb/bluettoth pan and connect.
the dial up connectiosn should start.
tell me if suceed.

i start internet sharing on phone. then go on bluetooth->quick connect-> network access -> my phone name. then it works as i mentioned above. but i had to change some properties in my bluetooth configuration to make it work.

The same for me : when I try tu use it as a GPRS modem for my TomTom Rider device, the Rider says that the DUN profile isn't provided as a service by the Trinity !!! Use to work perfectly with my old Magician !!! I'm really disappointed ! Will see if the brand new ROM with GPS feature corrects this...

try to start internet sharing first (in trinity), connect to gprs and then start bluetooth services discovery on tomtom.

I'm not using bluetooth, but trying to use the phone as a modem using USB with a laptop. It works, but is really flaky, so would appreciate some pointers on how to fix the problem.
First thing that I do is connect the phone to my laptop via USB. Activesync starts up on both the laptop and the phone. Then, when I start the Internet Sharing program, the phone stops Activesync and connects to the network. Everything works fine for a while and I am able to surf the net on both the Trinity and the laptop with no problems for a while. The problem is that after a period that can vary from 10 minutes to 1 hours, the laptop loses the internet connection. The phone is still connected to the internet though and I can still surf using the PDA. It's just the laptop that loses the connection.
I have to reboot the laptop and soft reset the Trinity to repeat the process to get internet on the laptop going again.
Any ideas what's causing the problem? I've tried disabling Advanced USB Functionality on the Trinity, but the problem is still there...

Connecting to Internet via Advantage?

Just got HTC Advantage 7501 and am having problems connecting my laptop to DialUp Server. I checked my old set up (with BlueAngel) and there's Bluetooth Dial Up Server that allows connecting laptop via Bluetooth to the HTC as a dial up modem to the internet. At least that's how it worked with Verizon here in US.
Can somebody suggests how to deal with this case? Am I missing some drivers or anything? In short - what am I doing wrong?
Thanks!

Zealus said:
Just got HTC Advantage 7501 and am having problems connecting my laptop to DialUp Server. I checked my old set up (with BlueAngel) and there's Bluetooth Dial Up Server that allows connecting laptop via Bluetooth to the HTC as a dial up modem to the internet. At least that's how it worked with Verizon here in US.
Can somebody suggests how to deal with this case? Am I missing some drivers or anything? In short - what am I doing wrong?
Thanks!
Click to expand...
Click to collapse
Have you tried using "Internet Sharing?" You can connect via USB or BT...

Yes, that's exactly it, thank you!
I to Internet connection sharing, connected to internet via 3G cellular connection and hooked up laptop to Advantage via Bluetooth Network Access Point. That worked.

PAN Working?
I've been trying to get this working for the last day. My X7501 is discoverable, I can see it for other bluetooth profiles. When I try to add the device by clicking "Join Personal Area Network" on my laptop it then prompts me to search for another device. I can't see my Athena. I can see another computer that supports PAN, just not the Athena.
Any thoughts?
McP

Check if there is a drop-down box that displays "Show computers only" and change it to "Show all devices". That, of course, if you are using Win XP

How to connect WM 6.5 device to WinXP via Ad Hoc to Internet

Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.

How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??

samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?

Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software

patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??