yup , i just bought the hd and already installed few programs but all of them were .cab files , but i was wondering how to instal the .exe files i found on the net or isn't this possible ? so yes can someone please help me out here , thx .
I'm pretty new to this, but I think in general, you have to connect you HD to your PC via USB, choose the activesync option (not direct drive), then run the exe on the PC, and it will install it to your HD via the cable.
If the pc doesn't recognise the exe (won't run it), try running it on the HD using file manager.
There are two types of exe files.
Those that run on the PC and those that run on the phone.
It usually states somewhere which one it is.
As Eclogue said, if it won't run on the PC, copy it to your
Storage drive and run it from there.
Related
Hello
I was trying to install tcmp4 on an XDA IIi, i downloaded tcmp4 onto the storage stick of XDA IIi, and clicked on the tcmp4, i get the message
'tcmp4' is not a valid Pocket PC application
i am sure i downloaded tcmp4 onto my XDA Exec in a similar way.
can you guys help me?
hello again
i figured out what to do, rather i remembered what i had done with my xda exec.
it is just the same procedure, get the cabinst file, and use it to install the cab file for the arm version
dear XDA_Guy
installing any application in Pocket PC can be either
1) exeutable file : which extention is .exe
these files (mostly and I say mostly) installable via the PC using ActiveSync program installed.
2) .cab file and these file shall be copied directly to the pocket PC and installed by clicking on them
Most program supplier (or programmers) produced the 2 vesrion of there programs i.e. in Cab and Exe format
the good thing with the cab version that you can keep in the SD card and everytime your hard-reset ( or format ) your XDA your can easly restore the programs from the SD (cab file ) without a computer.
IMPORTANT NOTE : about cab file ... most pocket pc or Windows CE deletes the cab file automatically after installing them.
to prevent this you need to install other cab installation utility / program.
personally I use the attached program. its exe file but just copy it and place it in your my documents or any other location . ( this is exe file but its a pocket pc exe file not PC )
dear XDA_Guy
installing any application in Pocket PC can be either
1) exeutable file : which extention is .exe
these files (mostly and I say mostly) installable via the PC using ActiveSync program installed.
2) .cab file and these file shall be copied directly to the pocket PC and installed by clicking on them
Most program supplier (or programmers) produced the 2 vesrion of there programs i.e. in Cab and Exe format
the good thing with the cab version that you can keep in the SD card and everytime your hard-reset ( or format ) your XDA your can easly restore the programs from the SD (cab file ) without a computer.
IMPORTANT NOTE : about cab file ... most pocket pc or Windows CE deletes the cab file automatically after installing them.
to prevent this you need to install other cab installation utility / program.
personally I use the attached program. its exe file but just copy it and place it in your my documents or any other location . ( this is exe file but its a pocket pc exe file not PC )
thanks for the reply nasoor
you mean that the cab file version are meant to be installed on sd cards
and the exe version is meant to be installed on the device itself by clicking on the exe while the exe is on the pc?
how do i use the active sync program to install an .exe file? i copied the .exe file to my sd card and accessed it through activesync(explorer) however by only clicking on the file, it only gives me the properties
yes ,
the cab files should be copied either to you SD card or to the Pocket PC using the activesync explorer.
the EXE file should be run directly from the PC not the XDA. the steps are :
1- Put your XDA in the cardle ( holder) which is connected to the USB.
2- wait for the syncronization process to finish
3- go to the EXE file for TCPMP program in your Desktop Computer
4- Run the file and follow the instructions to be installed
5- after finishing you will see your XDA doing some progress and copying
6- You are done enjoy
regarding the cabinstall_en.exe file for cab installation , even this file is an exe file but as I told you before you can just copy it to your SD card and run in the Pocket PC not the Desktop because this is a Mobile EXE file.
I hope you are fine now ..
thanks for the reply nasoor
is there any way to know if a a file is a mobile exe file or is a pc exe file?
actually , without a programmed tool or external tool you can not
I mean , the only way - as I think - is by try executing the file , if the file fails to run with an error messaage says ' The file is not a valid 32 bit application ' then it means that this is for Pocket PC
otherwise , it will run , then it should be ment for the Desktop or Windows XP /ME application
thanks for the reply nasoor
pocket pc's are 32 bit applications?
Hi there, I'm having trouble installing programs that seem to come in loads of separate files. One of them is an XML file and the rest seem to be unopenable/unrecognisable by windows.
Can anyone give me advice on how to install these onto my MPV3100. I've search for Install help but there doesn't seem to be anything specific on how to do it.
Thanks.
wingzero124 said:
Hi there, I'm having trouble installing programs that seem to come in loads of separate files. One of them is an XML file and the rest seem to be unopenable/unrecognisable by windows.
Can anyone give me advice on how to install these onto my MPV3100. I've search for Install help but there doesn't seem to be anything specific on how to do it.
Thanks.
Click to expand...
Click to collapse
I can't be sure but it sounds like you have decompressed a .cab file on your PC before trying to place it on your device. If so that's not the way to do it.
There are in general threetypes of programme/files you can download for WM5
1. ,cab files
2. .exe files
3. .zip files
.cab files you place directly on the device by connecting via active sync using the Explore button on the PC active sync screen. If you have a storage card inserted navigate to that and drop them in there. To run a Cab file just click on it on your device.
.exe files in the main you run on your PC whilst connected via active sync. The programme will automatically instal the programme on the device. Keep an eye on the device there maybe some taps you have to make.
.Zip files in general you extract these on the PC and then you'll see if they are .cabs or .exes and then treat them as above.
Most programmes will then show up under the Start>Programmes listing on the device and you run them from there. Some though may not especially if you chose to install them to storage card. In which case use file explorer programme to navigate to them.
Ultimately you'll want a programme that allows you to create short cuts to them probably on the desktop screen.
Hope this helps
Mike
Hi peeps,
Is there an app or a trick where I can run an .exe file on my UK Vario without having to hook up to my pc?
TIA
What exe? How are you getting the file on to your phone?
V
When I'm out and fancy downloading something I generally download direct to my device and as a rule everything a in exe format so need a PC to run the app, game etc.
Not a particular exe just in general
Thanks
I think he meant that how can he extract the stuff he wants from a SETUP.EXE of a PPC software.
If it is an EXE, you can run (still need a PC) it on a PC, check the temp folder and get the CAB file. Copy and run this on your PPC.
Many thanks for the info, not quite what I mean.
For example I'm at work and browsing some ppc freeware I find this file pocketpictureinstall.exe and download it direct to my device.
Thats it I dont have my home pc to hand just my Vario and unless I run ActiveSync which I can't at work there is no way it will run on my device.
Is there any software out there that would allow me to provide the .cab files local on the device or just run the app?
Thanks again.
No not really. There are possible apps you could compile for the PPC to assist, but you'd have to be a coder. If not, then the easy answer is typically no - but many websites offer the choice to download the installer in cab format.. Look around.
V
Someone can help me? I have Tom_B_B_v4[2].0_TouchFlo_Professional installed on my Artemis, and activesync 4.5 on laptop.
Is impossible to transfer files from device to laptop. It is possible only from laptop to Artemis. What can i do?
Many thanks!
if the files are located in the my doc dir then they should be mirroed onto the
my pda documents inside the my documents on the pc
otherwise one can use explore device
in activesync on the pc and copy the cab file
and paste it where one would wish on the pc
does'nt works.
Does'n work. This is the problem: if I try to copy a file (for example a Mp3) located everywere (internal or sd memory) in the pda, and paste in the laptop (desktop or folder), it seems than start copying file, but really does'nt.
(Sorry for my english)
coccobabbo said:
Does'n work. This is the problem: if I try to copy a file (for example a Mp3) located everywere (internal or sd memory) in the pda, and paste in the laptop (desktop or folder), it seems than start copying file, but really does'nt.
(Sorry for my english)
Click to expand...
Click to collapse
sounds like a firewall (windows file sharing problem) try and run a network wizard on the pc and make sure you can share your C drive.
give it a go it should work.
neilhhardy said:
sounds like a firewall (windows file sharing problem) try and run a network wizard on the pc and make sure you can share your C drive.
give it a go it should work.
Click to expand...
Click to collapse
I think is a problem of activesync 4.5. I read the guide online and in "transfer files" is written "does'nt work with all devices" (is written in Italian, I think this is the traslation)
solved?
I solved temporarily in this way:
On Activesync activate tranfer files, automatically create on desktop folder "my documents" where is possible manage files.
Then I installed "cardexport-wm5" on device. With this program is possible to switch usb connection to Actyvesinc or Cardexport; in this case the memory card is recognized by PC like an external USB drive. Is'nt so easy, but I do'nt realize still better.
However, I'm looking for a solution for this problem, and I am available to share my experiences, in this moment I think that is a bug of activesync 4.5. So, ask for administrators if possible open a topic for this problem.
hi guys..
seems like a n00b question..i know
but i downloaded some cool apps from handango which are made for Xperia..but i was unable to install them.
do i need to use Activesync for such files?...and if yes..i also tried to install activesync 4.5 but it says 'not for Vista'
any tips?
exe files can be
1. pda exe's which is not install files but the program itself
which you yourself have to copy to where ever you want it
and make a shortcut in programs yourself
2. windows exe's which use activesync on xp and Windows Mobile Device Center on vista
to copy the cabs to the pda and auto install them
in many cases those exe files are self-extracting zip files and one can just rename them zip and copy out the cab files one needs typically the arm one
thanks..i installed Windows Mobile Device center on my vista..connected X1 via USB and done!