Some registry tweak or something?
weenter said:
Some registry tweak or something?
Click to expand...
Click to collapse
You just want the ringer to RING without any other indication of an incoming call?
or
U dont want an INCOMING CALL ALLTOGETHER?
I gather it is the Former coz In the latter simply turn On <flight mode>
U can also set the device to recieve calls without Ringing by setting it to Pick up after <zero> calls.
Using a handsfree here would be an advantage.
U wont Miss any call.
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
weenter said:
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
Click to expand...
Click to collapse
i'm also looking for a way to do this
Did anyone found a solution for this ?
texarcana said:
Did anyone found a solution for this ?
Click to expand...
Click to collapse
I doubt it... Seems kinda pointless, having the ability to tell you who is calling, but then deliberately turning it of..
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
texarcana said:
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
Click to expand...
Click to collapse
That's the network, not the device.
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
Well... The cause may be that, but I doubt showing a caller ID screen will change the times....
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
I agree with texarcana here, the lights begin to flash on my phone when it rings a good few seconds before the screen get around to displaying the incoming call notification.
This is on WM 6.1, on my new HTC Diamond Touch.
I assume that notifications such as an incoming call or text message are either
A) A windows message sent to a background service awaiting it.
B) An application is executed with parameters describing the event
In either case, i believe it must be possible to redirect the notification in the registry. However, if the notification method is at fault (ie causing slow response, most likely to be true if B above is true.)
I'm going to investigate, I'll post an update of my results.
Im really sorry to bump this really old thread but has anyone solved this?? I would like to disable the incomming call notification too.. cuz I just added a full screen caller ID, but the damn notification pops up and covers the photos of my contacts.. so whats the point of the caller ID if i, not gonna be able to see the pictures
well i know its in Hkey_curent_User\controlpanel\notifications\phone
but im not sure how to disable it...
or even more important (for me) only disable it for a certain #...? thanks! anyonbdy
To Diamond I found. cab which options are unblocking "flash light for." in SOUND & NOTIFICATION it didn't give but nothing. I dug around in the HKLM/Drivers/Builtln/Keylight and Keypad register and I turned off LED generally speaking but I blocked buttons
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
thanks, works for my htc pure with phonex
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
this will make the bubble of incalling to disappear??? if not who can i do it
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
Didn't work for my samsung i760, what about DispllayOrder? Set it to 0 too? Or what would that do exactly? I'm curious now, it's set to 1 so if all else fails, I could change it back to 1 again... I guess. I'd just like to know first before I go blindly jumping into something.. haha
Sidenote setting it to 0 did work I just had to reset my phone so remember to reset your phone after changing this, I see the curtain try to popup, or at least the frames but nothing after that... Although sometimes it does act buggy and I'll completely miss or be able to answer a call cause my phone will constantly viberate (No pickup on ringtone at all starting) then after the call is missed the viberating will stop but my phone will still be frozen... Thats when the screen is off though..
Okay after a few tests sometimes it does work and sometimes it doesn't work at all and the curtain will still show up... Then again screen off sometimes the phone wont ring at all, I'm setting it back to 1... LoL
I just wish there was a way or a more advanced notification manager, it should be just like being able to disable incoming text messages and disabling sent message notifications..
____
I'd love a fix for this too, as I already have a picture caller id with PocketX Photo Contacts Pro...
But it's annoying as all get out!! To put it politely, I slide to answer then I've got to press the left softkey too! In order to answer a call, if I could just disable the built in windows mobile caller id curtain then it'd be a heck of a lot easier...
Please let's get a scripter on this to start working their way around and tweaking it to be able to be disabled..
Thanks!!
________
As for ring delay which is also a few other posters concern of the phone taking it's own sweet time to decide when to start ringing... This is what I used for my i760, I'm sure someone here could turn this into use for any phone make and model:
Ring Time Limit Fix:
**772 [service code]
six zeros for the code (000000)
Scroll down with the d-pad till you see end of basic nam
hit right d-pad to change "exit" to "more"
hit middle d-pad to select
hit the down d-pad 76 times till it says slot cycle index
Change this to 1 or lower EDIT: By entering the value with the number pad and then you hit the middle d-pad to exit.
This changes the frequency at which the phone talks to the tower and will
start the unit ringing MUCH faster. the lower you go the faster but the more battery it uses. I find 1 gets the phone ringing within 3 seconds but doesn't hinder battery life.
Click to expand...
Click to collapse
I've got mine set to 0 though, but then again, I don't get very many calls, plus I have my phone charging a lot. Also I always carry around a spare extended fully charged battery in my holster... Usually my battery lasts a whole day... But with it set to 0 my phone picks up and rings at the end of the first ring on the callers end.
When I receive a call and don't answer I get orange LED notification of missing call BUT when I receive sms my green LED doesn't react, it blinks green not informing me of missing event/sms, is this some kind of bug ? How is yours ?
My ROM is original english shiped version 1.15.405.5 (10/23/06)
Works fine here. I use LED notification all the time!
Have you tried:
Settings : Sounds Notifications : Notifications (tab) :Event = Messaging (New Text) : Check box (Flash Light)
Hey, thank you very much, I didn't noticed that although my Trinity is 3 days old strange it isn't enabled by default btw.
I have found this LED notification features very useful despite trend of removing it for mobile phones devices.
can you maybe help me 2?
My Sms' Led is blink in the side of my phone
and i read and read and try to make it blink in the top of my phone?
and i dont understand how you could do that the other man told you..
plz replay
how?
how does you even get into this? Settings : Sounds Notifications : Notifications (tab) :Event = Messaging (New Text) : Check box (Flash Light) im normally good to phones.. but this is driving me Crazy..
Atwfisk said:
My Sms' Led is blink in the side of my phone
and i read and read and try to make it blink in the top of my phone?
and i dont understand how you could do that the other man told you..
plz replay
Click to expand...
Click to collapse
should you try to solve it with this
is there any possibility to turn the led red when I receive a sms? now it blinks red only to missed calls and other notifications, but not to sms.
on the modaco - forum anyone has developed a tool, that change the leds of the Kaiser..
but there is not so much "free changeability" in this program..
maybe it will also work in trinity.. but no warranty
here you can find it
but i will develop a program which changes the leds like i want ;-)
[EDIT]
oh.. i saw, that its a new version since Dec, 31 2007 ;-)
i will also try that again ;-)
yes, it works on trinity, thank you very much. though I can`t change the led color in red for sms, it is a pretty cool tool.
Alexandru_unicul said:
yes, it works on trinity, thank you very much. though I can`t change the led color in red for sms, it is a pretty cool tool.
Click to expand...
Click to collapse
Perhaps I am not understanding the problem, but have you tried "Settings", "Sound and notifications", "Notifications", "Event" - there you can choose sound, led and vibration action whenever you receive a SMS (or any other event).....!?
I have set my device to vibrate and then flash the red LED for an unlimited time, whenever I receive a SMS or mail...
Regards,
theknf
Black Trinity
MARY 3.3.5
Radio 1.50
my version of firmware does not have led option for sms income... anyway, phone alarm seems to resolve all my wishes, and far beyond that
Hello
How can i costumize LEDs (i.e. for missed call)
is there any way to fix phonealarm to work fine with LEDs.
or any other program
THANKs for your help
I need program like berrybuzz on blackberry that allows to disable any led color and chose what it is for (example: green - unread mms / blue - incoming call / red; red blinking - missed call).
or any program / reg edit that disables only blinking green led. I tried many programs like nueled and reg edit and it doesn't works.
anyone? _
open the phone and remove the led.
THIS thread may help you. Post if it work in orther to let us know how it was