Database Users

Run 'Uncertified' CABs

Hello everybody,
Is there any backdoor possibility to run "Uncertified" CAB files on JasJar WM2K5 ?
Thank you for the answer,
Best regards,
Baudy.

From the wiki:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry&version=30
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
Click to expand...
Click to collapse
V

vijay555 said:
From the wiki:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry&version=30
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
Click to expand...
Click to collapse
V
Click to expand...
Click to collapse
Did not help, still says "Unable to install. Uncertified system software detected."
Baudy.

Try this:
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Snagged this from the Apache (Sprint PPC-6700).

BeyondtheTech said:
Try this:
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Snagged this from the Apache (Sprint PPC-6700).
Click to expand...
Click to collapse
No, did not help. Thanx anyway !

Uncertified system software problem, still a problem
Anyone have an update on this problem? I"m trying to install the Blackberry Connect software ( Not the TMO one) on a Cingular Wizard.
Thanks

Uncertified system software problem, still a problem
Anyone have an update on this problem? I"m trying to install the Blackberry Connect software ( Not the TMO one) on a Cingular Wizard.
Thanks

baudy2 said:
vijay555 said:
From the wiki:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry&version=30
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
Click to expand...
Click to collapse
V
Click to expand...
Click to collapse
Did not help, still says "Unable to install. Uncertified system software detected."
Baudy.
Click to expand...
Click to collapse
Hey,
When you did a soft reset, did you do it using the hole or software?
I was told that if you use the hole the settings don't activate, you need to make the registry changes, and use software to restart the phone, like psShutXP.
Any help?
Regards.

Unfortunately Not
I've did a hard reset, hit the reset hole for 3 seconds when it starts to load software so I can boot up without the ROM loading ( as I have read you need to do ). I still can't install the Blackberry software. It still says that it's uncertified software.
Any other ideas?
Thanks for the patience.

You don't have to hold the reset pin in for 3 seconds, you have a window of three seconds in which to tap it.
OK, once you have done the hard reset you can then try the registry edit or the .CAB file to get rid of the security check.
Once you have edited the registry and installed the .CAB you will have to do a soft reset, not a hard one.
A hard one will make the changed that you just made go away.
If you have a copy of psShutXP you can use that to reboot rather than the reset pin, or you can make the changes then wait 5 minutes before you reset.

baudy2 said:
Hello everybody,
Is there any backdoor possibility to run "Uncertified" CAB files on JasJar WM2K5 ?
...
Click to expand...
Click to collapse
try this, I don`t know author, but it helped

Blank screen of writing a new text message on 818pro

Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?

scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?

Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?

scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.

is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.

Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.

niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.

scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3

Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.

niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.

scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.

scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike

mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.

scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD

it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone

Full manila HD cab keeps loading..??

Hi
I used to have the TF3D(With tha panel installer) cab installed on my Xperia and it worked fine.
I decided to give Manila HD cab a shot sence people were saying it was working faster.
I did a hard reset and installed the manila HD cab by itje, installed the panelinstaller but when I choose to start TF3D it keeps loading...
I've searched the forum but I can't find the answear.
I wonder if I'm supposed to install the cabs in a certain order for it to work...
Anyone who can help???
Thanks

I was told just quit by clicking "panel" key, and re-select this panel. I haven't tried it, so let me know if it works.

I did try that...it didn't work. I did a soft reset as well but no luck...
I installed the Manila HD cab on my storage card by the way. I don't know if that can be the problem because I did the same thing on my TF3D and it worked fine...

Yes,I gotta the same problem and at last it is solved by re-installing the cab in phone rather than card.

cellulose1986 said:
Yes,I gotta the same problem and at last it is solved by re-installing the cab in phone rather than card.
Click to expand...
Click to collapse
I double that....did the same earlier today and it worked

Settings->Personal->Menus not opening

Hi all, i have problems opening the menus under settings->personal->menus. It does not open. Any idea what is the problem?
Appreciate your help

finlay777 said:
Hi all, i have problems opening the menus under settings->personal->menus. It does not open. Any idea what is the problem?
Appreciate your help
Click to expand...
Click to collapse
What ROM are you using?
Have you tried SR and HR yet?
Have you added any extra Apps?

ozmoran said:
What ROM are you using?
Have you tried SR and HR yet?
Have you added any extra Apps?
Click to expand...
Click to collapse
I have done the soft reset, still same issue. have not done a hard reset because all my programs will be gone
i am using ROM version 1.18.723.3 WWE
I had many added extra Apps.
Previously the Menus are working, but it been a while that i click on it until today and realise it cannot be open.

Anyone able to tell me how to get the Menus back without a hard reset?

From m6Silver taskbar: http://forum.xda-developers.com/showthread.php?t=520132
Have u installed it?
In Known issues and workaround..
3. WM6.1 unable to open >Settings>Personal>Menus
Delete this file "shellres.dll.0409.mui" in your windows dir after installing the taskbar and soft reset. Not all device use this file.

Cab file was not installed?

Hi.
Ive jush flashed my phone and now i tried to install zenonia. But when i press the cab it says it was not installed. :/
Any clue what could be the problem?
Using duttys multilang 1.8.
Ive tried searching for it but i couldnt find any fix for it..
Maby there is a more advance cab installer so i can monitor what went wrong?
Regards Hargibi!

hargibi said:
Hi.
Ive jush flashed my phone and now i tried to install zenonia. But when i press the cab it says it was not installed. :/
Any clue what could be the problem?
Using duttys multilang 1.8.
Ive tried searching for it but i couldnt find any fix for it..
Maby there is a more advance cab installer so i can monitor what went wrong?
Regards Hargibi!
Click to expand...
Click to collapse
did you accept the security warning? if you don't, then the cab wont be installed.
have enough space to install the cab? another reason for the fail.

Yes and yes..
:/

Is it just that .cab you are having issues with?

so far yes.
Problem beeing i cant download it again as i dident buy the download protection from handigo. So i cant try to redownload it
:/