For a few months i have a problem with transmitting files trough USB cable using WM5torage or Activesync and furthermore - damaging SD card FAT structure. My first thought was the card is dying. I've bought a new one, but it didn't solve the problem. I've checked both cards in digital camera and card reader and both are OK. My second thought is that USB socket is damaged. Since that moment I've stopped using USB in Wizard for transmitting files. Now I'm using card reader or BT and I have no problem with the logical structure of SD card.
Now I would like to change the ROM, but I can't do that using card reader or BT. Is there a way to check USB transmission?
Till now I've checked different cables, cards, computers to communicate with. I've done hardreset. No positive effect.
I've flashed WM6 in my Wizard a year or more ago and for couple of months there was no problem with USB, so the problem is not connected with ROM.
I suppose the mainboard or USB socket is damaged but I don't know any method to verify them. Can anyone help me with this?
Simply,to check the usb connectivity,get the phone in Bootloaders,hook up the phone with pc via usb cable and check small usb appear at the bottom of the Bootloader screen,if its there then its establishing connection,otherwise,there's a connection problem.The cause may of faulty usb cable or mini usb port of the phone.
Even try to change the usb input port of the pc,in which you usually insert the usb,try with other port of pc.
As I've wrote in my first post I've tried different USB cable and some PC's, so the problem is inside Wizard and it is not a SD card.
In bootloader mode Wizard discovers USB connection, but because of my problems with transferring files trough USB I'm afraid of possible errors during transmission.
Related
Hi im new here
I got my hd2 when it first came out running winmo 6.5 now i just cant connect it to the computer tried more than 1 computer and more than one cable when i connect it only charges i receive nothing on the computer like i used to before i have tried everything in the setting usb to pc still same thing
please help me how can i connect it
and i also tried hard resetting it more than once same thing
under settings tab -----other , there will be a usb to pc button
I bet you have tried all setting changes so since you have done a hard reset and it still doesnt work, it has to be your micro USB cable. I had the exact same problem as yours and i feared that it was the micro USB port that was faulty. But then i tried a different micro USB cable and it works perfectly. Hence, it is likely to be your cable. Im not bad mouthing HTC because of the amazing work they have done, but their accesories seem to be a bit down on quality. My original micro USB cable is now frayed and almost severed, my Touch HD micro USB is also frayed and the original earpiece is now experiencing audio balance issues.
the thing is the cable that comes with the hd2 i lost it but when i was using it i could connect
but now im using nexus one cable and Nokia n900 cable to connect to the computer and it just charges like i said nothing appears
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
If your HD2's USB port doesn't work you can connect to ActiveSync via bluetooth. I do that very often for a quick synchronization, and since HD2 has an Activesync profile it's easy to configure...
Anyway, check that "accept USB connections" option is selected in your pc ActiveSync configuration.
Most probably, he's facing the da** usb port breaking issue.
kawshigan said:
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
Click to expand...
Click to collapse
from where can i download windows mobile device after uninstalling it?
You will find it here.
Thanks for everyone who hellped it turned out nothing was wrong with my hd2 cause i tried connecting my cousins hd2 using the cable i use it didnt work
turned out i must connect the original hd2 cable
Hello guys, recently my micro usb port is not working properly, the pc's can't detect it(tried 4, mac,windows and linux os's) so is not the computer, changed 3 cables, so is not the cable, something must be wrong with the micro usb port, it can charge(usb, wall power) with no problem, but the phone is not detect by pcs, adb, etc, any idea what could be the problem? how can it be charging and the usb debbuging protocol or whatever isn't working, can I screw the transfer usb protocol? but the charge protocol in the same micro usb port could be still working, thanks in advice!
torroella88 said:
Hello guys, recently my micro usb port is not working properly, the pc's can't detect it(tried 4, mac,windows and linux os's) so is not the computer, changed 3 cables, so is not the cable, something must be wrong with the micro usb port, it can charge(usb, wall power) with no problem, but the phone is not detect by pcs, adb, etc, any idea what could be the problem? how can it be charging and the usb debbuging protocol or whatever isn't working, can I screw the transfer usb protocol? but the charge protocol in the same micro usb port could be still working, thanks in advice!
Click to expand...
Click to collapse
I had the same problem as you, it was impossible to make any computer to recognize the phone. Moreover it charged very slow, the phone thought that it was always plugged to the computer even if it was connected to the wall charger.
I did a factory reset, but the problem persisted. I called Google and they sent my a new phone, which now works perfect.
I am wondering whether anyone has connected a USB 3.0 hub to the Axon 7.
The reason I ask is that I am going on a trip soon and want to back up my camera SD card each day to a USB stick. I don't want to take a laptop. What I'd like to do is connect a USB card reader / hub to the phone to copy files from the SD card to the USB stick at USB 3 speeds. Devices like the Ravpower wd03 only do usb 2, which will take ages per file.
Will this work? Will I need a USB 3 otg?
Sent from my ZTE A2017G using Tapatalk
Update - USB Hub Works - but.....
OK, so I took the plunge and bought an Aukey USB C to USB 3 adaptor and a USB hub - one of these. I did it that was as I don't have other USB C devices.
The USB hub works fine with USB memory sticks. Each time i insert it registers a new USB OTG drive and I can happily copy to and from it (and more than one
But every time I insert an SD card into the SD reader, the Axon 7 gives me an error "Unsupported USB Drive: This device doesn't support thus USB drive. Touch to set up in a supported format". When I try to format the card, it fails.
Any ideas?
Update 2
I should add that:
1. The same problem occurs even if I use the MicroSD card I use in the phone - so it is not a formatting issue.
2. I also have a Note 5. If I connect the USB hub to that via a USB OTG, the Note 5 can happily read the SD Card.
3. The SD slot USB Hub works fine when when plugged into a PC.
Do I need an additional USB OTG? Will that conflict with the phone?
Update 3!!!
This is getting ridiculous but I want it to work.
So I tried plugging a SD Card reader into the USB hub. Lo and behold it works!!!! I wonder whether the issue is just that the SD card reader in the hub is missing something which allows the Axon to read the SD card.
That was only USB 2 - I am going to invest in a USB 3 SD card reader (my camera produces large files!) So I am going to invest in a small USB card reader and will report back.
Update 4
So the card reader has arrived as has my USB 3 stick. Now I can copy all the files from the SD Card to the USB Stick.
The only issue is that Dropbox scans the cards and starts trying to upload them as Camera uploads so I've had to kill the process.
The other issue is that my file manager (File Manager HD) doesn;t allow copying and I have to use the System file Manager, which is awful. Am going to work on that process over the weekend. Any suggestions gratefully received on that front!!!
Rubbish. Rubbish. Rubbish
The connection just isn't stable enough. The phone keeps saying that the card(s) keeping g being disconnected / removed. There is nothing wrong with the hub or either the USB stick or the sync card / card reader.
Last chance - I will add a power supply to the USB hub. If that doesn't work I'm afraid my views will be confirmed - this is a great phone with a great DAC but other than that it is just a bit rubbish and cheap for a reason, with a manufacturer which doesn't want to develop for it. I'm the EU least.
Sent from my ZTE A2017G using Tapatalk
I have a LG G6 H873 and I'm trying to use an OTG adapter to read an SD card (Kodlix Type-C Reader) and I'm not getting any prompts for a USB device being detected (and the LED doesn't light up on the adapter).
I've tried the same adapter on my wife's LG G5 and it works fine (both os are at the same revision). I've also tried the "OTG Troubleshooter" app which seems to detect that a OTG device is plugged in. Plugging a USB cable from my PC to this device works fine and I can browse the files on my phone from the PC.
Any ideas?
Same here. OTG worked fine. Then one day stopped working.
My phone recognizes all my files in file folder but stock gallery and music app showes no pics or songs.When i flashed oreo update my sd card worked fine.on boot up it would show media scanning and then show a little sd card icon in the notifications but after 2 days my phone does not scan anymore.Is this related to your problem?
I have a G6 h870ds. After loads of mucking about I have discovered that my OTG only works with full USB3 OTG adapters and USB3 memory sticks.
I cant use USB2 wired OTG adapters or USB2 memory sticks. Initial connection of the USB2 OTG adapter is recognized but no connected devices are detected. I have a USB2 memory stick with an LED on it. When it is first connected to the OTG cable it flashes in a way that leads me to think it is trying to reply to the USB bus interrogation but something (probably software) fails. The phone connects to my usb2 PC port just fine so I don't think the hardware is at fault. I've reset the phone but alas that didn't help!
No issues whatsoever if I plug in the OTG adapter first, then the drive. No matter if USB 1, 2 or 3 memory stick.
Hello everybody. Asking for help and suggestions. Maybe LENOVO representative take notice. Have secondhand yoga book. Resolved almost all problems but micro USB port. First of all, charging device died out. Find 30-watt charger with QC 3.0 and charge now working perfectly. Next tried to connect mouse, usb hub and usb dongle. Each time got DEVICE NOT RECOGNIZED message. Got error in device list.
But......tried to connect external HDD with noname HDD box and it connected. Connection may work to copy, install files or disk may disconnect randomly.
Tried system restore, tried to change drivers ( intel drivers for chipset not avaliable now) with no luck. Think problem is with low port current, but even small mouse and dongle make error and non-SSD HDD work 9 times out of 10. Have anybody experience problems with connecting devices to micro USB port?
Tried 3 different OTG cables and OTG micro USB to USB dongles. No luck.
Maybe the port is corrupted or desoldered
Sent from my Pixel 4 using XDA Labs
I did change it with the warranty I had. I had the same problem and did not want to fix by myself as the warranty was still active