I am having problems with my screen it wont touch I did a rom upgrade on it to see it will go away but it didnt so I am stuck on the first screen tap the screen to set up your windows and it stud there what can I do the screen was working perfectl until today how can I solve this problem please emergency
Try using Scott's Reloaded 4 ROM. http://forum.xda-developers.com/showthread.php?t=444342 I used the "loaded" version and it doesn't prompt for the screen calibration. Have you tried a hard reset? It sounds like it might be a hardware issue, but I'm no expert.
i_ate_lunch said:
Try using Scott's Reloaded 4 ROM. http://forum.xda-developers.com/showthread.php?t=444342 I used the "loaded" version and it doesn't prompt for the screen calibration. Have you tried a hard reset? It sounds like it might be a hardware issue, but I'm no expert.
Click to expand...
Click to collapse
tried hard reset already but when it starts the screen windows mobile 6.1 and it says tap on the screen I tap and it wont pass that I cant get into nothing what can I do .. I need my phone omg..
This can be caused by an OEM conflict. Try flashing either the stock rom or a clean rom like DCD's, then after it boots, if it still doesn't work, take out the battery for 5 minutes and then try to boot it back up, if it still doesn't work I would say you probably damaged the touchscreen and will need to go in for service unless you want to try the repair yourself, it's a very slim piece of plastic that I believe goes under the screen.
BTC
BillThyCat said:
This can be caused by an OEM conflict. Try flashing either the stock rom or a clean rom like DCD's, then after it boots, if it still doesn't work, take out the battery for 5 minutes and then try to boot it back up, if it still doesn't work I would say you probably damaged the touchscreen and will need to go in for service unless you want to try the repair yourself, it's a very slim piece of plastic that I believe goes under the screen.
BTC
Click to expand...
Click to collapse
Hi and thank you I tried hard reset and the screen still didnt work I am still in the same position how do you clean the rom like DCD becasue my screen its still stuck in in the area where it says tap on the screen so windows can continue and it stays ther its still there omg...
by clean rom he meant a rom that doesn't have a bunch of junk on it. DCD's newest rom is a nice one. Have you tried reloading a rom from your carrier? try the official rom first. or better yet maybe you should take it back to the store to see what your options are before you go voiding any warrenties.
Related
Hello,
my friend's /he dodn't speak english/ Leo have problem. The notifications of WM automatically pops up. It start slowly and as time goes on it pops up more frequently and faster. It is impossible to work on it. He tried to flash custom ROM again, but any change.
He tried to remove the screen protector but no luck.
He wearing his Leo in his pocket , but there are any physical changes on the Leo
ANY IDEA?
try going back to the stock (provider) rom.using custom roms can leave old files after flashing which can cause problems.
if that doesn't help try using mtty to format the phone and then flash a new rom.
okey, i tell him, but i can't believe to this because i use the same rom. this problem started after 2 weeks of using the rom.
but thank you very much and i will translate this to him.
hope it will help
okey. he tried to reflash the shipped rom but no luck. tried few hard reset and no luck. today he gonna try myty.
I am wanting to change my ROM to a custom one. I have a Xda Orbit 2, I have tried 2 ROMS the other day:
"Kostas244_ROM_3g_23016_FINAL_B"
"pcarvalho_eXtreme__23016_Beta_3D__ROM_3.19_Release"
They went on perfect no problem, restarted, went through the usual stuff aligning screen etc.. Everything worked... Well everything I tried worked apart from it was like the audio drivers where missing.
They was no sound when playing music, incoming call... or when i tried ringing someone I couldn't even hear anything.
I made sure the volume was up and it wasn't on silent/vibrate but still didn't work.
Can anyone help please?
Thanks, James
Scroll down in the pcarvelho post and try the 23547 - everything on this seems to work.
Don't forget to flash the original rom, hard reset, then flash the new rom and hard reset.
Just tried it, everything works.. audio works aswell. another problem is that it will not connect to the service provider.. when i put a sim card in and turn it on it loads everything ok then i get a pop up saying "the operation failed" and just wont connect to the phone, and the touchflo doesn't work, it says "tap here to launch touchflo" but when you tap it, it doesn't do anything.
james mellor said:
Just tried it, everything works.. audio works aswell. another problem is that it will not connect to the service provider.. when i put a sim card in and turn it on it loads everything ok then i get a pop up saying "the operation failed" and just wont connect to the phone, and the touchflo doesn't work, it says "tap here to launch touchflo" but when you tap it, it doesn't do anything.
Click to expand...
Click to collapse
Think it´s a flash problem..
flash Orginal rom + hard reset if you see the calibration screen after that flash my rom also with a hard reset....after a complete boot a soft reset
[email protected] said:
Think it´s a flash problem..
flash Orginal rom + hard reset if you see the calibration screen after that flash my rom also with a hard reset....after a complete boot a soft reset
Click to expand...
Click to collapse
I tried that, well...
orginal rom > hard reset
custom rom > hard reset > soft reset
It still doesn't work, I might be doing something wrong, I don't know but I have noticed that when the sound stops working and I put the phone to my ear I can here a like buzzing type sound.
james mellor said:
I tried that, well...
orginal rom > hard reset
custom rom > hard reset > soft reset
It still doesn't work, I might be doing something wrong, I don't know but I have noticed that when the sound stops working and I put the phone to my ear I can here a like buzzing type sound.
Click to expand...
Click to collapse
try my rom and say me if it´s the same (see signature)
[email protected] said:
try my rom and say me if it´s the same (see signature)
Click to expand...
Click to collapse
I think I have sorted it now... I'm just going to test it for a while and if I notice any faults I will try your ROM. But to get it sorted I....
Flashed with original ROM > Hard Reset
Flashed with "my rom 23529 with EzInput 2.1" > Hard Reset > Soft Reset
Flashed with "pcarvalho eXtreme (23547 Beta non3D) ROM 3.19 Release" > Hard Reset
And now its running smooth for now. I will report back to this thread in a few days after I have had a play around.
james mellor said:
I think I have sorted it now... I'm just going to test it for a while and if I notice any faults I will try your ROM. But to get it sorted I....
Flashed with original ROM > Hard Reset
Flashed with "my rom 23529 with EzInput 2.1" > Hard Reset > Soft Reset
Flashed with "pcarvalho eXtreme (23547 Beta non3D) ROM 3.19 Release" > Hard Reset
And now its running smooth for now. I will report back to this thread in a few days after I have had a play around.
Click to expand...
Click to collapse
if it´s ok for you...it´s ok for me ...
but the normal way is...:
flash Orginal rom + hard reset if you see the calibration screen after that flash my rom also with a hard reset....after a complete boot a soft reset
[email protected],
My problems back. Not as bad though. I have noticed everything ok apart from when I call someone it works perfect, then when I hang up the audio stops working and i get a buzzing sound from the front speaker.
james mellor said:
[email protected],
My problems back. Not as bad though. I have noticed everything ok apart from when I call someone it works perfect, then when I hang up the audio stops working and i get a buzzing sound from the front speaker.
Click to expand...
Click to collapse
i saw this in your signature:
Radio Version: 1.70.OliNex
if this is your radio...flash radio 1.59.46.12....or 1.59.44.02 from my rom thread under steps...
hi
i do have a problem in my mobile htc p 3600 in changing the ROM i cannot do this any more and what happen is am doing all of the step but once am finish the same ROM appear to me without being change a bit and not even format its come if like i did restart only can you help me with this please
thanks
The phone has probably been ROM'd to much and in this case has been locked to that specific ROM. The only thing you could do is sent it back to the manufacturer which is Orange and have a special technician reset it back to factory settings. Or your other option is to stick with the ROM you got until someone cleverer than me replies to this topic. In the mean time enjoy the use of the ROM your using and if shove comes to push just leave it for a few days until you know more information. But remember not to fiddle around with it to much I knew someone who kept on adding ROM's to their HTC P3600i and in the end it just kept freezing on the start up screen and kept becoming unresponsive when trying to reset to factory settings or trying to change the ROM.
I'm not a NOOB, I do it all possibilities for FIX the G-Sensor, but I'm very impresive with this problem....
If the G-Sensor of my HD2 doesn't work and I do it a Reset, Flashed a official update by T-Mobile, I installed android all correctly and it worked before because I have the phone from sealed box NEW NEW, What part of the HD2 I need to buy for repair?
Is your G Sensor working on WM or is it haywire on both Android and WM?. And is the G Sensor totally spolit or is it working and you are getting wrong outputs? If it is only on Android, you should try installing terminal emulator. Launch it, type su (return) bma150_usr( lay phone flat on back and hit return ) exit(return), exit(return and close). You should lay phone on its back. This might not work and after trying about 5 times, if it sill doesnt work, you should try reinstalling Android, or try a different build to see if that fixes a problem. But, i think you have already done that, so you might want to try a completely fresh installation. For WM, if calibration still didnt work, flashing a stock ROM is not enough. If the problem is still there, you should first flash HSPL,Task 29, Radio and the stock ROM. Then, perform a hard reset. If the G Sensor does not work like it is supposed to, then you should send it for repairs. Hope this helps.
I has Windows mobile 6.5 Stock from T-Mobile it doesn't work :/
Thanks for your help!
Hello everyone!
I encountered two problems with my HD2 having installed Gingerbread 2.3.7 Nexus-HD. The first one; sometimes, I don't know sure why, and what causes this, but when I lock the phone and I try to unlock it( immediately, I didn't try to wait for longer) it doesn't unlock, but the display turns from dark(as locked) to a little bit grey, as if it would work, but I cannot see what I am doing.
The second one, sometimes, I think after I run a game, or something that requires more power and I press the HOME button, when I try to enter the Menu, it flashes continously.( as if it would change rapidly from Menu, to Home screen)
Where these problems might come from and what can I do in order to fix them ?
Really sounds like a hardware issue, try pressing the buttons hard and releasing a few times.
Did any liquid get on the phone ?
CruceruCalin said:
Hello everyone!
I encountered two problems with my HD2 having installed Gingerbread 2.3.7 Nexus-HD. The first one; sometimes, I don't know sure why, and what causes this, but when I lock the phone and I try to unlock it( immediately, I didn't try to wait for longer) it doesn't unlock, but the display turns from dark(as locked) to a little bit grey, as if it would work, but I cannot see what I am doing.
The second one, sometimes, I think after I run a game, or something that requires more power and I press the HOME button, when I try to enter the Menu, it flashes continously.( as if it would change rapidly from Menu, to Home screen)
Where these problems might come from and what can I do in order to fix them ?
Click to expand...
Click to collapse
Had alot of this issue on slow dying sdcard. My experience is your card have some problems. Try to check your card windows pc, start CMD and type- chkdsk (drive letter of sd card): /x /f or try to format your card with sdformatter pc freeware.
Sent from my HD2 using xda premium
You can try flashing the rom again. Before doing it, remeber to format your sd card. Try other roms too. If the problem persists in evry rom, then try a different sd card. after this the only problem will be your hardware.
Give a thanks if you found this Helpful
I don't think it is a hardware problem, beacause it worked all fine a few days ago, and the phone didn't took any damage in this time. I have this HD2 from a friend and when he gave it to me, I wanted to reinstall the ROM,bacause I wanted not to appear anymore his google account. I am a beginner in HTC and I installed this ROM following a tutorial, but I am not sure I did eveything all right. I wonder how I could erase everything and install a good,stable ROM from scratch, but I need an exact tutorial for this.
Meanwhile, those problem solved by themselves, but now I get the same freezing screen when I try to call or someone calls me. I can hear them, but it just freezes and I cannot do anything, unless I remove the battery. It doesn't happen all the time, but very often...
LE: Right now I'm trying another ROM, I installed a version of CWM of 150 mb( as requested by this ROM) and wiped everything and now it is installing hyperdroid CM7 v5.5.2.
I have to say that with the previous ROM I tried to remove the SD and the same error, so I thought that changing it may be a solution.
CruceruCalin said:
I don't think it is a hardware problem, beacause it worked all fine a few days ago, and the phone didn't took any damage in this time. I have this HD2 from a friend and when he gave it to me, I wanted to reinstall the ROM,bacause I wanted not to appear anymore his google account. I am a beginner in HTC and I installed this ROM following a tutorial, but I am not sure I did eveything all right. I wonder how I could erase everything and install a good,stable ROM from scratch, but I need an exact tutorial for this.
Meanwhile, those problem solved by themselves, but now I get the same freezing screen when I try to call or someone calls me. I can hear them, but it just freezes and I cannot do anything, unless I remove the battery. It doesn't happen all the time, but very often...
LE: Right now I'm trying another ROM, I installed a version of CWM of 150 mb( as requested by this ROM) and wiped everything and now it is installing hyperdroid CM7 v5.5.2.
I have to say that with the previous ROM I tried to remove the SD and the same error, so I thought that changing it may be a solution.
Click to expand...
Click to collapse
Well did you try mtty
http://forum.xda-developers.com/showthread.php?t=623356:confused:
OK. so you want to flash a new NAND rom from scratch? deleting everything in the process. please contact me through the private messaging function i will take you step by step through evrything. all links, steps, etc. arite?