Related
Bought my Nexus in the US this summer, really enjoy this little beast.
I have a question regarding charging. The provided charger is a 5V- 2A charger but a US one. I have at home a HTC one X charger which delivers 5V - 1A. Can I use this charger ? What is the difference between 1A & 2A ?
Thx, Yves
yves.alexis said:
Bought my Nexus in the US this summer, really enjoy this little beast.
I have a question regarding charging. The provided charger is a 5V- 2A charger but a US one. I have at home a HTC one X charger which delivers 5V - 1A. Can I use this charger ? What is the difference between 1A & 2A ?
Thx, Yves
Click to expand...
Click to collapse
I don't see how less amps would hurt it. It may not register a charge, or charge very slowly. I would wait for another opinion.
2A will charge faster than the 1A charger. That's the only difference.
thedauntlessone said:
2A will charge faster than the 1A charger. That's the only difference.
Click to expand...
Click to collapse
OK, thank you
On the flip side, can I use my N7 charger to charge my mobile (SG2)?
My SG2 charger is set for 0.7A, while the N7 charger is set at 2A.
Mine charges with the USB cable i use to transfer files, which is about 500mA. Works but slow.
checking around the net, that's what it say.
the USB port have a maximum of 500mA i believe. And i did noticed it tend to charge more slowly. While the provided Asus charger with USB port on it, it have 2000mA (or 2A). So i guess the Nexus 7 is made to be able to support up to 2000mA, while it will charge more slowly when connected to a computer's USB port.
I took out my PSP and its charger recently, and this charger is also 5V, 2000mA, except it's a round tip made to fit the PSP charging port.
I do have another 2000mA charger, it also have a round tip, luckily it fit on my Ainol Elf II tablet. I got this charger/power supply when i bought my HDMI switcher, it work without it, so it was sitting there for all this time, unused.
i'm gonna try charging it with the provided Asus charger now.
browngeek said:
On the flip side, can I use my N7 charger to charge my mobile (SG2)?
My SG2 charger is set for 0.7A, while the N7 charger is set at 2A.
Click to expand...
Click to collapse
Yes. Your phone will not charge at the same rate as the N7, however.
Sent from my Nexus 7 using Tapatalk 2
Hi all,
Ok, so I finally managed to order a 16Gb Nexus 4 and hopefully it will be with me in 1 week or so.
And I was wondering one thing regarding the AC adapter: I believe (pls correct me if I am wrong) that the original AC adapter’s output voltage is DC 5V, 1.2A.
I will need an extra AC adapter to keep it at work and I was planning to use one of those:
- The Sony Xperia P AC adapter will output 5V, 1,5A
- The Samsung Galaxy S AC adapter will output 5V, 0,7A
It is clear that neither of those 2 chargers will match exactly the specifications of the original Nexus charger (same voltage, but different amperage).
So, here goes the questions:
1) Is there any problem if I use a charger that will output the same voltage but with different amperage?... if not, which one would you use and why?.
2) how the amperage affect to the charging process?.
Thanks all in advance
PS: sorry for terrible English
You can use any charger up to 2 amps.
Sent from my Nexus 4 using xda app-developers app
Evergreen74 said:
Hi all,
Ok, so I finally managed to order a 16Gb Nexus 4 and hopefully it will be with me in 1 week or so.
And I was wondering one thing regarding the AC adapter: I believe (pls correct me if I am wrong) that the original AC adapter’s output voltage is DC 5V, 1.2A.
I will need an extra AC adapter to keep it at work and I was planning to use one of those:
- The Sony Xperia P AC adapter will output 5V, 1,5A
- The Samsung Galaxy S AC adapter will output 5V, 0,7A
It is clear that neither of those 2 chargers will match exactly the specifications of the original Nexus charger (same voltage, but different amperage).
So, here goes the questions:
1) Is there any problem if I use a charger that will output the same voltage but with different amperage?... if not, which one would you use and why?.
2) how the amperage affect to the charging process?.
Thanks all in advance
PS: sorry for terrible English
Click to expand...
Click to collapse
You must use a 5V AC USB Adapter and better no LESS than 1A
for Fast Charge.
AC Adapter I Use:
iPad AC Adapter 5V 2.1A at Work
PlayBook AC Adapter 5V 1.8A at Home 1
Original Nexus 4 AC 5V 1.2A at Home 2.
Our Nexus 4 will Draw around 0.8A when Batt lever at 0% - 80%,
then around 0.5A at 80%-95%, Final State 95%-100% will draw 0.2A roughly.
When 100%, Nexus 4 will use the AC power & the Current "A" show on phone
will like 2mA (0.002A) when idling.
** 1A = 1000mA
As previous poster said, do not go under 1.2amp.
I run the OEM charger in my bed room, a USB charger to my computer, and a 2.1amp charger in the car.
Sfkn2 said:
As previous poster said, do not go under 1.2amp.
I run the OEM charger in my bed room, a USB charger to my computer, and a 2.1amp charger in the car.
Click to expand...
Click to collapse
Why do you say not to go under 1.2A? Charging from a laptop is at .5A. I've been using a 1A charger since day one. Haven't experienced any issues with it.
Charging at a lower amperage shouldn't hurt anything, just charge slower. All you have to do is make sure it's a 5V charger. Amperage shouldn't matter but a lower amp charger will charge slower. As for a higher amp charger, the phone will only draw the amount of power it needs to charge so using 2A charger won't hurt anything either.
Also 2mA is 0.002A not 0.02 A
wilsonlam97 said:
You can use any charger up to 2 amps.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Since the charger doesn't actually regulate the charging itself (the phone does this) it doesn't matter how many amps it can supply, could be 100 amps, no worries. As long as it is 5V, the phone will draw as many amps as it needs.
Since the supplied charger is 1.2A rated, it's fair to assume that the phone will never actually try to draw any more than that, so there will be no benefit in going higher.
Going for a lower current charger will likely extend the charge time.
I use a 2.1 amp daily without any issues.
Sent from my Nexus 4 using Tapatalk 2
Wow guys!!... thanks all for your answers!!
So, if I understood correctly, the amperage will only affect to the charging time, meaning that by using the Xperia P AC adapter (1,5A) the battery will be charged faster that using the Galaxy S one (0,7A)... right?
Pls allow one last question: a few yeard ago, I think I read in some forums that a slower charging process could help to keep the batteries in the best conditions for a longer time... is this still true with modern batteries??
Again, THANKS all for your help!!
Evergreen74 said:
Wow guys!!... thanks all for your answers!!
So, if I understood correctly, the amperage will only affect to the charging time, meaning that by using the Xperia P AC adapter (1,5A) the battery will be charged faster that using the Galaxy S one (0,7A)... right?
Pls allow one last question: a few yeard ago, I think I read in some forums that a slower charging process could help to keep the batteries in the best conditions for a longer time... is this still true with modern batteries??
Again, THANKS all for your help!!
Click to expand...
Click to collapse
Yes, the .7A charger will take a little longer to charge you phone.
On the other answer, I think NO but I'm not as familiar with LiPo batteries. I would venture to say that .7A vs 1.2A (max the phone will draw but I think someone above mentioned it's even less than that when the battery is very low) is not going to make a bit of difference in your battery life.
One thing I do know about LiPo's is you do not trickle charge them. So while plugged in it will charge at the rates mentioned above until full and then it QUITS charging all together. Once the phone discharges the battery to a certain level, it will charge it back up again. Probably at 98-99%.
There may be one other thing to consider when selecting a third party charger. In the Nexus 7, the device looks for pins 2 & 3 (data) of the USB plug to be shorted in order for it to draw full current. If this pins are open (or have a load across them as is the case with iPhone/iPad chargers), the Nexus 7 will assume it is plugged into a computer and limit its draw to 500MA.
Not certain the Nexus 4 behaves the same way but would assume so.
setzer715 said:
Yes, the .7A charger will take a little longer to charge you phone.
On the other answer, I think NO but I'm not as familiar with LiPo batteries. I would venture to say that .7A vs 1.2A (max the phone will draw but I think someone above mentioned it's even less than that when the battery is very low) is not going to make a bit of difference in your battery life.
One thing I do know about LiPo's is you do not trickle charge them. So while plugged in it will charge at the rates mentioned above until full and then it QUITS charging all together. Once the phone discharges the battery to a certain level, it will charge it back up again. Probably at 98-99%.
Click to expand...
Click to collapse
setzer715, thanks for the answer... I think I will be using the Xperia P charger at work...
Thanks all for your help!!
I want to make this case clear. According to my Charging log,
Here is some key point.
Nexus 4 Max Draw Rate at Fast Charge Mode is around 800-900mA,
even you use a Charger that rated at 1A (iPhone Tofu), 1.2A (Original),
1.8A (Playbook), 2.1A (iPad).
Fast Charge Mode must be with Charging Cable with 2&3 pin Shorted,
or the charger itself have the 2&3 pin already shorted.
Therefore, 1A is a Sweet spot for getting Charger & Charging Time for
Li-Po/Li-Ion/Ni-MH Batt charging.
If you use under 1A Charger, eg 700mA or 500mA, it will take much longer
to charge the batt but no harm as well. Just too slow only.
The stock charger that came with my phone sucks, I use one from my epic 4g touch (gs2)and it charges much better
DEVICE: Nexus 4
KERNEL: Franco r95
ROM: PROJECT Extinct Life Event
jlear3 said:
The stock charger that came with my phone sucks,
Click to expand...
Click to collapse
Why you say so...? What's wrong with it...?
Talon88 said:
Why you say so...? What's wrong with it...?
Click to expand...
Click to collapse
Left a phone on a charger all night with a long (10ft) cable and it couldn't even charge the phone over night. I know a 10ft cable will slow things down but my gs2 plug has no problem charging my phone. Search around and you'll find a few fail stories about the stock LG charger.
Sent from my Nexus 4 using Tapatalk 2
so i lost my fast charger which i didn't didn't use anyway as i kept fast charging unchecked in phone settings
now i got a new romoss charger which is a good charger AFAIK. it is rated at 2.1a, plugged it in and it took too long to charge. i downloaded an app called Ampere to measure the current and the maximum it gets is about 1000mA.
i thought the new charger was ****ty so i tried my friend's LG charger 1.8a and got the same results. tried another 2.1a samsung charger and nothing exceeds 1a.
is it something wrong with my phone or is it software related?
i'm using eRobot's newest rom with spaceX kernel (also tried googymax and suemax kernels). tried to check the fast charge option and again, same results.
any opinions or thoughts are much appeeciated
thanx
You need a Qualcomm Quick Charge 2.0 compatible charger in order utilize adaptive fast charging on your Note 4([email protected] & [email protected] output). Buy new Note4,Nexus 6,Motorola X Style charger. Also make sure your USB cable is undamaged/good quality, since not all cables actually support fast charging.
i dont need to use it as a fast charger, i just want it to charge with 5v 2a which the chareger is capable of
I use the stock 5V 1A charger and charging time is about 3 hours. Can i use a P10 lite charger that is 9V 2A? Will it damage the battery or charging hardware?
it could damage the phone in the long run
9V 2A charger won't damage the phone because it will never charge it with 9V as the phone don't support it. The charger will charge the phone with 5V 2A and this one is totally safe
So if i use a 5V 2A charger (my tablet charger), there will be an increase in charging speed?
If I charge Oneplus 8 pro with lets say Car Charger with supported standards PD 3.0/QC 4.0/ QC 3.0/ AFC , is there a downside? Or just slow charging speed?
And, is there a downside if I need to charge my phone at work for example to take notebook USB Type C charger and plug in... (again apart of slow charge)
Vecera said:
If I charge Oneplus 8 pro with lets say Car Charger with supported standards PD 3.0/QC 4.0/ QC 3.0/ AFC , is there a downside? Or just slow charging speed?
And, is there a downside if I need to charge my phone at work for example to take notebook USB Type C charger and plug in... (again apart of slow charge)
Click to expand...
Click to collapse
The rate of charge just be slower, otherwise no problems, no.
I just got the 8 pro yesterday, IN2025. From what I've read and i just tested your charging speed will be better w/ PD as the phone does not support QC anything and just treats as it regular charging.
I tested the charging at ~70%.
USB PD, 4.2V/1.8A - 2A
QC 3.0 4.2V/1..2A
Warp Charging, 4.2V/4.8A
Warp with regular cable, 4.2V/1.2A
Regular charging 4.2V/1.2A
Hope that helps
okay so my previous phone was a PD 3.0, I have a bunch of charger that are 3.0 which support up to 65W. What would it do with the OnePlus 8 Pro. will it be limited to 35W or will it go higher?
Always limited by the phone max specs.
so in that case I should still get the 30W from a PD 3.0 charger to the OnePlus 8 Pro?
Cause I don't want to spend $50 for a Warp Charge Car adapter specially if my PD 3.0 charger can provide the same amount of wattage
mbze430 said:
so in that case I should still get the 30W from a PD 3.0 charger to the OnePlus 8 Pro?
Cause I don't want to spend $50 for a Warp Charge Car adapter specially if my PD 3.0 charger can provide the same amount of wattage
Click to expand...
Click to collapse
No, you will not get 30W from your PD charger, it will max out at 15W.
OnePlus only supports PD at 5V, likely because Dash charge only uses 5V. PD caps out at 3A for 5V, so 15W. PD achieves higher wattages by increasing the voltage rather than increasing the amperage like Dash Charge (hence why PD cables are generally thinner than Dash charge ones).
Thorin78 said:
I just got the 8 pro yesterday, IN2025. From what I've read and i just tested your charging speed will be better w/ PD as the phone does not support QC anything and just treats as it regular charging.
I tested the charging at ~70%.
USB PD, 4.2V/1.8A - 2A
QC 3.0 4.2V/1..2A
Warp Charging, 4.2V/4.8A
Warp with regular cable, 4.2V/1.2A
Regular charging 4.2V/1.2A
Hope that helps
Click to expand...
Click to collapse
So in your case all chargers give less than required charging voltage?! AFAIK, only dash/vooc charges at battaries max voltage. others supply 5v. check your data