Database Users

Screen Brightness - JasJam ROM is not using it fully

Hi
I am using the JasJam WWE ROM. The screen is bright but not fully. When I switch to camera, for 1/2 a second the screen is fully iluminated and very bright. Than I lose it again. Does it happen with other ROMs? Can this be changed to get a full ilumination? I live in a very sunny country and it is sometimes really annoying.

I noticed this on the HTC ROM...i am running the imate ROM now and the same thing. I figured it was that if you ran with the screen on UBER bright like on camera you may drain the battery BIG TIME.

You can try Vijay's VJLumosII:
http://www.vijay555.com/?Releases:VJLumosII
Most probably it will work on TyTN too, but I haven't tried it.

Well this software actually works but I have to start it manually every time. It makes no sense. Therefore I added it to the Startup folder but that is not good as it is not letting the camera to start saying that "camera is already running". Any idea?

In VJLumosII web page:
Use -off to disable it (eg before starting the camera)
Click to expand...
Click to collapse
And I think you don't need to place it in startup manually, also from the webpage:
VJLumos II can install a notifcation event, so that every time you switch on the Phone, you will automatically get SuperBrite.
Click to expand...
Click to collapse

VJLumos II was written for the Magician, for which it works great.
It has been tested on the Universal, but briefly, and it superbrites the screen, but unfortunately you can only do it once (I think).
It does, kinda, work on the Hermes, will make the screen brighter (so I hear). However, the Hermes has the same problem, and I haven't had a chance to fix it, because I never used the Universal long term, and don't have Hermes, sniff.
But I'll fix it. Even-shwally.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V

Dears
I’m suffering from the same problem with my i-mate JasJam,
The screen is not bright enough.
I check the VJLumos II solution and it works fine, except the OFF button that does not response on my devise
And due to that I have to SR the device in order to use the camera.
However it is the only solution that I have at this moment.
More ideas ?
Maybe someone have a “secret” and smart CAB file that can fix this issue ones and for all (-:
Thanks everybody
Ori

vijay, this sounds like a challenge for you... I guess that what we need is a full brihtness mode without harming the camera. Sorry, mate but I can't give you my own Hermes as I live far a way.

ideas ?
someone ?
:roll:

nobody have this problem that the screen is not bright enough ???
ori

Guys, I've released VJLumos III for the Hermes, in the development and hacking thread.
Early release, but I've been using it all day and works fine.
MUCH brighter!
V

Fullscreen/HUGE Dialpad Request Please?

Is there anyone that can make a Dialpad that takes up more of the screen, Im looking for something along the lines of the example of the picture on the right.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----
The att one on the left is the current one I have which is the closest thing but very hard to use while driving and running around, which I got from PhilD41
I just changed the all the buttons to invert when they are pressed down where his only inverted the number and you couldn't see it under your finger while pressing it. If someone can just create one I can skin it myself, I just need a base to put them on. Thanks.
If anyone wants mine Ive attached it, to install just extract to windows directory.ONLY IF YOU HAVE HTC DAILER

you can try DXC's iphone dialpad, any style that's doesn't have a .5 at the end.
http://forum.xda-developers.com/showthread.php?t=380466

i just made this skin for dxc's dialpad, as you can see its fullscreen
http://forum.xda-developers.com/showthread.php?t=394518

Some time ago I made a small flash app that was fullscreen:
(It has severall skins)
Its not great, but it works...
You can get it here:
http://twolf.sytes.net
Under the area MOBILE/FLASHKALL

How do i use this flash dialpad? i have wm2003 and macromedia flash 7 installed but when i dial a number nothing happens...

Sorry, works fine here...
You just need flash 7, dial a number and press the green button...
oh, the EXE exports the data to the storage card, so I guess you need one too...
But i can make a version that exports to a automatic temp folder managed by you system.

hm... i have a storage card and in the temp folder are the files.
I use a german rom wm2003 rom for my magician. There is probably a difference between the folder names: the storage card is called Speicherkarte for example.
Too bad that it isnt working for me

A while ago I made a dialer that is full screen. It has no functionality other than dialing, and only works when installed to main memory...
http://forum.xda-developers.com/showthread.php?t=389951

l3v5y said:
A while ago I made a dialer that is full screen. It has no functionality other than dialing, and only works when installed to main memory...
http://forum.xda-developers.com/showthread.php?t=389951
Click to expand...
Click to collapse
Works like a charm, if you need graphics let me know...
lamandrion said:
hm... i have a storage card and in the temp folder are the files.
I use a german rom wm2003 rom for my magician. There is probably a difference between the folder names: the storage card is called Speicherkarte for example.
Too bad that it isnt working for me
Click to expand...
Click to collapse
I made a new version, please try it now.

many thanks! it´s working now!

twolf said:
Works like a charm, if you need graphics let me know...
I made a new version, please try it now.
Click to expand...
Click to collapse
If you feel like doing some graphics, I think there was a post in that thread... I stopped doing any development on it because no one seemed interested...

l3v5y said:
If you feel like doing some graphics, I think there was a post in that thread... I stopped doing any development on it because no one seemed interested...
Click to expand...
Click to collapse
Will do.
I know what you mean, if no one gives feedback we loose interest...

If anyone's interested: http://forum.xda-developers.com/showthread.php?p=2230491

Problem with internal camera

Hi, i've a problem with the internal camera (vga front camera).
I've flashed my hermes with wm6.1 19900 Rom Version CRCs r10.4 and i would like to have a videocall callconference with a friend of mine. Each screen (mine and him) are black.
So i install "coolcamera" and "WewbCamra plus", to try to view if fornt camera function, but i can't see anything.
Someone can help me.... please....
sorry for my english.

Jepssen ita said:
Hi, i've a problem with the internal camera (vga front camera).
I've flashed my hermes with wm6.1 19900 Rom Version CRCs r10.4 and i would like to have a videocall callconference with a friend of mine. Each screen (mine and him) are black.
So i install "coolcamera" and "WewbCamra plus", to try to view if fornt camera function, but i can't see anything.
Someone can help me.... please....
sorry for my english.
Click to expand...
Click to collapse
try his new version CRC's R11

i try it now, and the result is the same......

The Coolcamera application is a good one to check if the camera is working.
It is possible that the push in connector on the front camera has come loose. I have seen this reported before. So if you have checked all software problems and have tried a hard reset, then you could investigate the camera connection. (It's a fairly major dismantle though and voids any warranty)
Here is the camera:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here you can see it's push on connector:
Mike

Thanks mike, but i'would like to found any other "software" solution.
i 've seen that this malfuncion is apperars with windows mobile 6

Jepssen ita said:
Thanks mike, but i'would like to found any other "software" solution.
i 've seen that this malfuncion is apperars with windows mobile 6
Click to expand...
Click to collapse
try 6.1

idem.... doesn't function........i'll wait for new rom and i'll try

mikechannon said:
The Coolcamera application is a good one to check if the camera is working.
It is possible that the push in connector on the front camera has come loose. I have seen this reported before. So if you have checked all software problems and have tried a hard reset, then you could investigate the camera connection. (It's a fairly major dismantle though and voids any warranty)
Here is the camera:
And here you can see it's push on connector:
Mike
Click to expand...
Click to collapse
Its kind of off topic, I have an att 8525 but noticed i have the connector for the front web cam. Has any one tried hooking up the front web cam on an 8525 and had any success getting it to work? where would be a good place to go about obtaining one of these web cam modules if I wanted to try it out?

Manilla 2D Camera Issue

Ok So I installed the update before update 17 and I put the camera software on my Titan XV6800. Now my camera will not work. Here is the error I get.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help me please? I want my camera working again.

Same here is there a fix im using update 16 on a htc touch. I also get another error "Unable to initialize camera. Failed to set up the camera device." PLZ help

I get that message when I'm trying to take a video, not when I'm taking a picture. This is on my Sprint Touch...Weird.

Bump for anyone with an idea!

Uninstall the Opal camera cab as that is the issue but if your like me, your probably going to have to do a hard reset as that cab didn't want to uninstall from my phone,

Calcu8323 said:
Uninstall the Opal camera cab as that is the issue but if your like me, your probably going to have to do a hard reset as that cab didn't want to uninstall from my phone,
Click to expand...
Click to collapse
I dont think i even installed that Cab. I get the error as well. Not always, but every other time

Then try to not use the manila2d first until more new bete or final release which is more stable

I believe there is an exe missing that belong in startup that initializes the camera. I am working on integrating this plus auto zoom into it for kaiser now, maybe some help for you as well.

I installed the 6.8 camera once, and tried uninstall it and it did not like bing uninstalled either. Iuninstalled all cameras an deleted the reg keys, theb reeinstalled the titan camera cab.
I still get some glitches, like the flash turning off to take a picture but it did make the camera functional again.
A hard reset and starting over cured the problem finally, as it was mentioned many times do not be afraid to hard reset if you install these blah, blah, blah

this will totally fix it
this problem bothered the hell out of me too untill i found this
http://forum.ppcgeeks.com/showthread.php?t=20432&highlight=vogue+camera

ix3u said:
this will totally fix it
this problem bothered the hell out of me too untill i found this
http://forum.ppcgeeks.com/showthread.php?t=20432&highlight=vogue+camera
Click to expand...
Click to collapse
THANK YOU. It worked i was looking everywhere to find a fix for this. It was driving me crazy since i just got everything setup the way i liked it. I didn't want to do a hard rest. thanks again

[Plug] NumBattery remaining battery capacity figures (accurate to 1%)

NumBattery allows the default Windows Mobile cell battery 4 show icon (left) retirement, which can show a percentage figure (right) with an accuracy of up to 1% of the battery at all times concerned about the consumption of friends should be useful.
【Installation】: the installation of cell phone to NumBattery.cab memory, restart the phone to see results; if there is no change, uninstall, install a QVGA.cab install, restart your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
http://www.ziddu.com/download/2995775/NumBattery.zip.html

very cool.
thanks

very nice! I've been looking for this for a while. I'd rather have an independent icon on my taskbar than one replacing the start icon, so this is a great replacement for ArielBattery. Thanks!

Great idea, unfortunately does not work on my HTC Elfin.

Can someone host this somewhere other than ziddu? I can't connect from work (not sure if the site is down or blocked).

algorhythm said:
Can someone host this somewhere other than ziddu? I can't connect from work (not sure if the site is down or blocked).
Click to expand...
Click to collapse
Here you are

algorhythm said:
Can someone host this somewhere other than ziddu? I can't connect from work (not sure if the site is down or blocked).
Click to expand...
Click to collapse
second that.cant connect from home either.

Looks nice! But does not run on my Diamond! I installed the Cab, nothing happenend. Reset, not really a change! Where are the files copied to? I haven´t found them!

jhw549 said:
Here you are
Click to expand...
Click to collapse
Thank you, good sir

awesome! love it.

It doesn't show the number in my P535. The icon is actually changed.

Not working on Samsung i760. Tried both cabs, the numbattery didn't do anything, the QVGA one changed the icon to a solid white one, but no numbers at all. Is there a configuration file to change or something?
Also, it wiped out my background picture of my today screen. Had to set it back up...

does not seem to work on my verizon touch pro

Did not work on my Treo 750 with WM6.0
after installing cab and restarting, I had a second battery icon (that looked like your original from the picture above, vertical lines), but no numbers.
Thanks anyway...

lol... working on polaris... thankfully

Does not work on Samsung Epix (i907).

Why does the thread opener has been banned?

If i´m right, i think he had "stolen" the battery-icon-gauge from another forum-member, and posted it her as his creation.
Look here: http://forum.xda-developers.com/showthread.php?t=424926

Great it worked in my TyTn II. Thanks for your effort bro. I am loving it.