Hi,
I had found here an solution to have the data-connection allwaysON.
(Registry-change- ....always on 0> to 1)
But if I make or get an call the connection gets lost. !
That cost`s me 100Kbyte each time.
Is there an solution to get the data-connection alive every time?
Thanks
Medes
As far as I know, there's no solution for this. Your data traffic gets interrupted when making a phone call.
Thats terrible!
With the O2-WM6.o Rom it was no problem!
I only have 30Mbyte free.. every Phone call interrupts the connection and this takes 100Kbyte !!!
A shame!
I must say I thought this was a limitation of the network. I have had this behaviour on both 6.1 and 6.0 ROMs.
I never had this problem as I used my old 6.0 - O2-ROM
so it can`t be an network problem...
regards
Medes
medes said:
Hi,
I had found here an solution to have the data-connection allwaysON.
(Registry-change- ....always on 0> to 1)
But if I make or get an call the connection gets lost. !
That cost`s me 100Kbyte each time.
Is there an solution to get the data-connection alive every time?
Thanks
Medes
Click to expand...
Click to collapse
Try Advanced Config > menu> more settings> connections and tap on your data connection name to set it as 'always on'. Tap ok, then done. Reset and you should be away. My network connection is always on even when making calls.
where do I find "advanced config"
regards
medes
medes said:
where do I find "advanced config"
regards
medes
Click to expand...
Click to collapse
Is an application created by XDA member Julien Schapman.
It can be found and downloaded here: http://forum.xda-developers.com/showthread.php?t=418151
Good luck.
Thank You,
but do You know if its compatible with the touch-cruise / Orbit II
I own? In the thread I had read its for the diamond.
regards
Medes
medes said:
Thank You,
but do You know if its compatible with the touch-cruise / Orbit II
I own? In the thread I had read its for the diamond.
regards
Medes
Click to expand...
Click to collapse
works fine on touch cruise
PERFECT! thank You very much!!!
regards
Medes
Related
Hi all,
i have released v1.1 of my Hermes Tweaker.
News here:
http://www.fit4cat.de/thread.php?threadid=91
English Peoples can register here:
http://www.fit4cat.de/register.php?styleid=6
Have fun.
thanks again! it's working perfect here
pof said:
thanks again! it's working perfect here
Click to expand...
Click to collapse
thanks goes to Arne Hess from http://www.theunwired.net again
he has test a lot a found a lot of errors before release
Also Thanks to Alex Januschewsky => http://www.mobilitynews.net
to Thomas Möller => http://www.sotmysoft.de
They all have test for me
THANKS TO XDA-DEVELOPERS FOR ALL TWEAKS
Great job, some very useful tweaks added.
excellent - just what i was looking for..
keep the good work up!
thanks
its got the bypass certification built in when you select unlock extended_ROM.
Can now edit config.txt to add a cab that auto-install protection software (eye on thief, with my config.ini) to send me wife the thief's phone no.
Hey BongoUser,
Great tool - many thanks.
One suggestion regarding Wifi:
I understand that the TyTN uses WiFi only at a rate of 11Mbit. A modification of the registry entry dot11DesiredTxRate from 0 to 13 will increase the speed to 54MBit/s.
Have not tested yet if this change will then allow operation in 54Mbit range only but I presume that also the slower networks are ok.
Maybe worth adding to the tool.
All the best,
StonyA
Hi BongoUser,
really great job !
Here a suggestion for a future update of your software, which should be fairly easy to implement:
An option to swap the HTTP User Agent in the Registry and afterwards have swap it back again to the TyTN default value.
The HTTP User Agent can be found as a Registry key (don't know it by heart at the moment; can drop you a line if you'd need that information) and allows you mimic your device for webservers checking this value as an other device, e.g. a Nokia phone
Apart from just making fun of this function there is also a practical use in some cases, in fact where a webserver checks the value for either oresenting a different screen resolution or switching to WAP mode (note: some Nokia phones just have a very poor screen resolution or even cannot present real http pages).
In some cases WAP pages are of advantage versus real http webpages because their size is smaller, e.g. when just retrieving pure information.
While there are surely more "sophisticated" (and probably also complex !) ways for upgrading the Hermes Tweaker I think this one would be swiftly implemented.
Regards
ghl10000
BongoUser said:
Hi all,
i have released v1.1 of my Hermes Tweaker.
News here:
http://www.fit4cat.de/thread.php?threadid=91
English Peoples can register here:
http://www.fit4cat.de/register.php?styleid=6
Have fun.
Click to expand...
Click to collapse
@BongoUser,
Thank you very much for this nifty tool.
However I have found something strange with it.
I disabled the CommManager from the taskbar and suddenly the battery icon is disabled as well.
Cheers,
Drifter
Very sorry to be so stupid !!! But I confess that I don't really understand what mean "Extended Rom" ?
Does it mean that I can use a part of this "extended rom" as a space ram to softs ?
What does it mean if I select "Mount Ext Rom" and "Unlock Ext Rom" ?
Thanks to be indulgent.
H2zO said:
Very sorry to be so stupid !!! But I confess that I don't really understand what mean "Extended Rom" ?
Does it mean that I can use a part of this "extended rom" as a space ram to softs ?
What does it mean if I select "Mount Ext Rom" and "Unlock Ext Rom" ?
Thanks to be indulgent.
Click to expand...
Click to collapse
It means the space where you can find the CAB Files from Orange or O2.
It will be installed after every hardreset.
If you don't know what Ext Rom is, don't unlock it and don't mount it !
Is there anywhere else this can be obtained ?
Registered about lunchtime - and still no confirmation yet so can't download it
It's not that I expect them to jump at my command - I'm just keen thats all
zoidster said:
Is there anywhere else this can be obtained ?
Registered about lunchtime - and still no confirmation yet so can't download it
It's not that I expect them to jump at my command - I'm just keen thats all
Click to expand...
Click to collapse
Hi, i have activate your account.
BongoUser said:
zoidster said:
Is there anywhere else this can be obtained ?
Registered about lunchtime - and still no confirmation yet so can't download it
It's not that I expect them to jump at my command - I'm just keen thats all
Click to expand...
Click to collapse
Hi, i have activate your account.
Click to expand...
Click to collapse
Excellent service !! Cheers mate
H2zO said:
I don't really understand what mean "Extended Rom" ?
What does it mean if I select "Mount Ext Rom" and "Unlock Ext Rom" ?
Click to expand...
Click to collapse
Read the Hermes for Beginners page on the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners
Thank You
BongoUser said:
pof said:
thanks again! it's working perfect here
Click to expand...
Click to collapse
thanks goes to Arne Hess from http://www.theunwired.net again
he has test a lot a found a lot of errors before release
Also Thanks to Alex Januschewsky => http://www.mobilitynews.net
to Thomas Möller => http://www.sotmysoft.de
They all have test for me
THANKS TO XDA-DEVELOPERS FOR ALL TWEAKS
Click to expand...
Click to collapse
Thank you all for this useful and very functional bit of free software.
Thank You
BongoUser said:
pof said:
thanks again! it's working perfect here
Click to expand...
Click to collapse
thanks goes to Arne Hess from http://www.theunwired.net again
he has test a lot a found a lot of errors before release
Also Thanks to Alex Januschewsky => http://www.mobilitynews.net
to Thomas Möller => http://www.sotmysoft.de
They all have test for me
THANKS TO XDA-DEVELOPERS FOR ALL TWEAKS
Click to expand...
Click to collapse
Thank you all for this useful and very functional bit of free software.
Registration on www.fit4cat.de
I registered on page http://www.fit4cat.de/register.php?styleid=6 two days ago (to get fit4cat 1.1) but I didn receive any confirmation E-mail on my address up to now . My username and pasword is not funkction. Where I made mistake? Thanks...
Re: Registration on www.fit4cat.de
Jetra said:
I registered on page http://www.fit4cat.de/register.php?styleid=6 two days ago (to get fit4cat 1.1) but I didn receive any confirmation E-mail on my address up to now . My username and pasword is not funkction. Where I made mistake? Thanks...
Click to expand...
Click to collapse
Hi,
i don't know where is the problem.
I had deletet 15 Accounts yesterday with no activision.
Please register again and send me your Username via PM.
I activate your account.
Re: Registration on www.fit4cat.de
Check your spam folder, my antispam filter detected the registration email as spam.
Does anybody know how to do a mortscript's script which turn on/off the wifi connection??
Or is there someone who has already done something like this??
EDIT:
My Wifi problem now is solved (thank to the ones who answered to my thread).
Now I need something similar to SWITCH ON/OFF MY GPRS CONNECTION, I have already tried VjVolubilis, but it doesn't close my GPRS connection....
so any solution??
Thank in advance...
Anyone?
Did you look at http://www.vijay555.com/?Releases:VJVolubilis ?
naboleo said:
Did you look at http://www.vijay555.com/?Releases:VJVolubilis ?
Click to expand...
Click to collapse
Is it possible to run this program through Mortscript and enable/disable Wifi?
naboleo said:
Did you look at http://www.vijay555.com/?Releases:VJVolubilis ?
Click to expand...
Click to collapse
How can I make this app run through Mortscript to enable/disable Wifi?
I tried using Mortscript:
RunWait( "\Programmi\vijay555\VJVolubilis\VJVolubilis.exe", "-wifion" )
But nothing happens.......
EDIT:
I found the error...
As we can read on the site:
WiFi Control: (WM5 Only)
My Touch runs WM 6...
So is there an other way to control WIFI??
I've BatteryStatus installed on my ppc, so I suppose that this way already exist...
Any help??
Noone??
Try this one http://smartmadsoft.com/wirelesstoggle/wirelesstoggle.zip
moneytoo said:
Try this one http://smartmadsoft.com/wirelesstoggle/wirelesstoggle.zip
Click to expand...
Click to collapse
MANY THANKS!!!!
This is just what I was searching for!!!!
THANK YOU!
I just installed a program called AEWifiTrigger (found here: http://ae.inc.ru/aewft.php)
Very simple. Works perfectly. Just put the .exe wherever you want on your phone and call it up as you wish (I have an Ultimate Launcher button mapped to it.)
Thanks for the previous apps....
Have you something similar for the GPRS CONNECTION?
VJVolubilis doesn't close my GPRS connection.....
Thank in advance....
Hi all, on my previous P3600 I was used to use a small application that was able to disconnect GPRS/data connection after a few (settable) minutes of inactitvity (gprs autodisconnect from Ervius). Unluckly this program doesn't work on my new Diamond. Is there any working application or tweaking for Diamond?
Thanks in advance,
Ciao, Andrea
I would also like to second this request. It's useful for those times when we are interrupted and forget to disconnect our data connection.
Advanced Config and DiamondTweak does it.
kien said:
Advanced Config and DiamondTweak does it.
Click to expand...
Click to collapse
I installed Advanced config, but I'm not able to find where and what change, can I have a hint?
Ciao, Andrea
Its in Menu (right soft key) then connection settings, hth.
kien said:
Its in Menu (right soft key) then connection settings, hth.
Click to expand...
Click to collapse
Thanks for your reply, it was already set to disconnect after 3 minutes, but still doesn't work
Ciao, Andrea
Genius2000 said:
Thanks for your reply, it was already set to disconnect after 3 minutes, but still doesn't work
Ciao, Andrea
Click to expand...
Click to collapse
Andrea,
Did you try phoneweaver from SBSH ?
It is a profile manager where you can set up (inside the profile) to change nothing except connect and disconnect data connections.
Every profile can be activated on a time basis (e.g. every day @ 7.00) , on a event basis (e.g every time you run Activesync) and manually with a predefined duration (e.g 1 hour)
Moreover it does many other things (it is a realy complete profile manager) ... and works great on my Diamond.
Ciao
dave said:
Andrea,
Did you try phoneweaver from SBSH ?
Ciao
Click to expand...
Click to collapse
Hi Dave, I just downloaded and installed phoneweaver trial version, for my needing is too much, I spent a few minutes to study various options, but I wasn't able to find the specific option I'm looking for (disconnect after x inactivity minutes)
Thank for your suggestion.
Ciao, Andrea
I found that using Advanced Config it disconnects after x minutes (mines set to 1) but it disconnects faster exiting opera but doesn't disconnect at all after checking hotmail.
kien said:
I found that using Advanced Config it disconnects after x minutes (mines set to 1) but it disconnects faster exiting opera but doesn't disconnect at all after checking hotmail.
Click to expand...
Click to collapse
I have the same problem, disconnects fast using Opera, and doesn't disconnect after checking email or update weather forecast.
Ciao, Andrea
I use GB soft tweak, never had any issues
pwoyorkie said:
I use GB soft tweak, never had any issues
Click to expand...
Click to collapse
Could you please explain better?
Thanks, Andrea
There Is Also A Program Called Nodata Which I Have Install And It Works
Genius2000 said:
Hi all, on my previous P3600 I was used to use a small application that was able to disconnect GPRS/data connection after a few (settable) minutes of inactitvity (gprs autodisconnect from Ervius). Unluckly this program doesn't work on my new Diamond. Is there any working application or tweaking for Diamond?
Click to expand...
Click to collapse
have you tried Spb GPRS Monitor?
pwatts1977 said:
There Is Also A Program Called Nodata Which I Have Install And It Works
Click to expand...
Click to collapse
I wasn't able to find where download Nodata
Ciao, Andrea
stegg said:
have you tried Spb GPRS Monitor?
Click to expand...
Click to collapse
Hi read GPRS Monitor features and doesn't seem it does what I need.
Ciao, Andrea
Solution here:
http://www.vandebilt.com/2008/04/20/auto-disconnect-gprs-in-wm6/
From external link said:
1. Miroslav Georgiev - September 2, 2008
Hi, I need to disconnect the GPRS after a minute and I have installed this cab file on my device. I have checked in the registries and the values are the correct (SuspendResume = GPRS_bye_if_device_off and CacheTime = 60 ), but my device still stay connected one minute after I have stoped to transfer data. Could anyone told me why this trick does not work on my device. It is HTC Touch with Windows Mobile 6 ?
2. Miroslav Georgiev - September 2, 2008
I forgot to ask something… the value of the registry is “GPRS_bye_if_device_off” is this means that the device should disconnects only if I turn off the device from power button ?
Click to expand...
Click to collapse
Seems not work, perhaps they are the same reg value of advanced config.
Download NoData
NoData disables your data connections, it doesn't disconnect automatically after a set period.
Pitchb3nd said:
Solution here:
http://www.vandebilt.com/2008/04/20/auto-disconnect-gprs-in-wm6/
Click to expand...
Click to collapse
Thank you for the link, i investigated a bit and discovered that in my registry is already set as per your suggestion, also I discovered that if the phone is NOT in sleep mode, so the display is ON, the auto disconnection works fine, but if the display is OFF the auto disconnection doesn't work at all, so, I think, seems something related to the sleep mode.
Could someone do the same test?
Thanks, Andrea
hello there..ive been searching for answer but did not find any
i used an option in advance configuration tools to enable wifi during standby mode but it did not work like it should
anybody knows how to do this?since sometimes i download things but when the screen goes off the download cancelled due to wifi has been diasbled..its really annoying u know
chasist said:
hello there..ive been searching for answer but did not find any
i used an option in advance configuration tools to enable wifi during standby mode but it did not work like it should
anybody knows how to do this?since sometimes i download things but when the screen goes off the download cancelled due to wifi has been diasbled..its really annoying u know
Click to expand...
Click to collapse
should be this key:
"HKLM","\Comm\TNETW12511\Parms", "HTCKeepWifiOnWhenUnattended","1"
thanks i will try your suggestion =)
no it does not work ..
chasist said:
no it does not work ..
Click to expand...
Click to collapse
sorry, my fault:
"HKLM","\System\CurrentControlSet\Control\Power\State\Suspend", "{98C5250D-C29A-4985-AE5F-AFE5367E5006}", 1)
i have checked the registry u mention..it is already value '1'
do u mean that i have to change it to '0'?
chasist said:
i have checked the registry u mention..it is already value '1'
do u mean that i have to change it to '0'?
Click to expand...
Click to collapse
..the value "1" is correct; just tested it.
WLAN is on; I press the power button -> device is in stand by -> press power button again -> wlan is still connected!
strange..it does not act that way in my device..
thanks for your help anyway
You can find your answer in this thread.
deechte said:
You can find your answer in this thread.
Click to expand...
Click to collapse
..this is exactly the same I wrote in post #2
cyron_at said:
..this is exactly the same I wrote in post #2
Click to expand...
Click to collapse
Yes, but the trick is NOT to reset the device after modifying the registry. That's quite unexpected from my point of view. That part is mentioned in the thread I pointed to.
Everybody try Axii_Wi_Fifix.cab. Really 100% works.
Yerlan said:
Everybody try Axii_Wi_Fifix.cab. Really 100% works.
Click to expand...
Click to collapse
That CAB does exactly what post #2 already suggests.
Tin
.
thanks everyone for all your help
BTW, another solution for some of you may be to use a different ROM. I'm using Topaz Essentials 1.6 ROM (TESS1.6) from chef Aman, and this ROM doesn't have the wifi turning off problem.
Yerlan said:
Everybody try Axii_Wi_Fifix.cab. Really 100% works.
Click to expand...
Click to collapse
Does not work on my HD2
TinTin said:
That CAB does exactly what post #2 already suggests.
Tin
.
Click to expand...
Click to collapse
It only works (worked for me) if you do the followings:
make the changes in reg:
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
as mentioned here
http://forum.xda-developers.com/showthread.php?t=524490
But if you reset your device you will have to re do it again
So, we really need a little cap with on/off
Hi All,
I know we have many tools to achive this like: "NoData" and "TD2 Tools". But I do not want to use these Tools.
They are good tools. NoData will disable Data/GPRS, but Can't make WiFi on demand. When the TD2 Tool can do both (or can give me what I want), but I do not want use this ONLY for this purpose (I am not using other services of this tool).
So This is how I want:
I disable the data connection by Settings -> Connections -> Advanced and select "My Work Network" instead of GPRS/Internet connection. So this prevents me to use the GPRS Connection.
Now Can one of you suggest how should I edit the settings of the "My Work Network" to use WiFi when demand? Or is there any Registry edit that will make WiFi on Demand instead of Connect when phone is used
Edit: For Solution Goto POST#15 in this thread or Here.
Thanks.
prabhat said:
Hi All,
I know we have many tools to do this like "NoData" and "TD2 Tools".
But I want this in some thing my own way:
I disable the data connection by Settings -> Connections -> Advanced and select "My Work Network" instead of GPRS/Internet connection.
This prevents me to use the GPRS Connection.
Now Can one of you suggest how should I edit the settings of the "My Work Network" to use WiFi when used?
So this will enable WiFi only on demand.
Thanks.
Click to expand...
Click to collapse
If GPRS is disabled, wouldn't it automatically roll over to WiFi?
Set both to Internet and disable GPRS from registry.
Also have a read here.
Bruce Inman said:
If GPRS is disabled, wouldn't it automatically roll over to WiFi?
Set both to Internet and disable GPRS from registry.
Also have a read here.
Click to expand...
Click to collapse
Thanks Bruce for the response...
Disable/Enable GPRS from registry is tricky than Connection Settings Change. So I will prefer the connection change option.
And reg. Set both to internet.. What does this mean? How can set WiFi to OnDemand? I think on the Stock 6.5.3 Ondemand wifi option is not there like it used to be in 6.5 stock roms. (Like WiFi will be on only if you use it, but in 6.5.3 if you get device to ON mode from standby it activate/connect)
prabhat said:
Thanks Bruce for the response...
Disable/Enable GPRS from registry is tricky than Connection Settings Change. So I will prefer the connection change option.
And reg. Set both to internet.. What does this mean? How can set WiFi to OnDemand? I think on the Stock 6.5.3 Ondemand wifi option is not there like it used to be in 6.5 stock roms. (Like WiFi will be on only if you use it, but in 6.5.3 if you get device to ON mode from standby it activate/connect)
Click to expand...
Click to collapse
**Duplicate Posting**
prabhat said:
Thanks Bruce for the response...
Disable/Enable GPRS from registry is tricky than Connection Settings Change. So I will prefer the connection change option.
And reg. Set both to internet.. What does this mean? How can set WiFi to OnDemand? I think on the Stock 6.5.3 Ondemand wifi option is not there like it used to be in 6.5 stock roms. (Like WiFi will be on only if you use it, but in 6.5.3 if you get device to ON mode from standby it activate/connect)
Click to expand...
Click to collapse
I think if you delete your current modem settings and create a new one w/o any server info, that will permanently disable GPRS and make WiFi your default.
TD2 Tools could set your WiFi on during standby.
Thanks again for reply. I am good with NOT using GPRS. So no worry on that side.
I only need assitance to set/configure WiFi so that it will be used/connected on demand (I dont want this to be connected any time I use my phone).
Note: I dont want WiFi to connect/start when I get my phone from standby to ON state, it should connect to WiFi ONLY When any application connect to Internet.
I hope my question is clear now
Thanks.
Any pointers???
In TD2 Tools 3 there is an option called "WiFi On Demand Service" which should turn on WiFi (if available) instead of GPRS when needed. Unfortunately this feature is disabled with the ROM I'm running, so I don't know if it works..did you try it?
sualc said:
In TD2 Tools 3 there is an option called "WiFi On Demand Service" which should turn on WiFi (if available) instead of GPRS when needed. Unfortunately this feature is disabled with the ROM I'm running, so I don't know if it works..did you try it?
Click to expand...
Click to collapse
Hi, Thanks for reply and if you see my first post, I know it is possible using TD2 Tools and also using NoData.
But I dont want to use the TD2 tools only for this feature , I know it is a GREAT tool for TD2 .
So is there any registry change or some other?
sualc said:
In TD2 Tools 3 there is an option called "WiFi On Demand Service" which should turn on WiFi (if available) instead of GPRS when needed. Unfortunately this feature is disabled with the ROM I'm running, so I don't know if it works..did you try it?
Click to expand...
Click to collapse
same here! And I'm using the Sense 2.5 ROM from nhathoa.
Any pointers/way to achive this?
I have seen this in 6.5 Stock Rom from India, where the WiFi will be used when require.
Thanks.
Yes this is one of the biggest "issues" that i have using the new 6.5.5 ROMS.....I used to love the "On demand" feature of 6.5......... just hope someone can fiure it out eventually.
angusc said:
Yes this is one of the biggest "issues" that i have using the new 6.5.5 ROMS.....I used to love the "On demand" feature of 6.5......... just hope someone can fiure it out eventually.
Click to expand...
Click to collapse
Yes True. The Ondemand feature of the 6.5 ROMs was prety good, but now I am looking for how can we resolve the "issue" in 6.5.3
Thanks.
Hello Experts, any clue/pointer?
Here is the solution
New ROM 6.5 with Manila 2.5 lacks this feature which you can not turn on with GAZ TD2 Tools. But here is the solution. Install the cab and enjoy your Wi-Fi on demand feature.
http://forum.xda-developers.com/showthread.php?t=579965
mehmetkoksal said:
New ROM 6.5 with Manila 2.5 lacks this feature which you can not turn on with GAZ TD2 Tools. But here is the solution. Install the cab and enjoy your Wi-Fi on demand feature.
http://forum.xda-developers.com/showthread.php?t=579965
Click to expand...
Click to collapse
Thanks friend for this link. I think this is the one I was looking for.. I will surely try tonight and update here.
Update: This is working great with the official stock 6.5.3 ROM. Now I love to be online using WiFi .
Thanks.
mehmetkoksal said:
New ROM 6.5 with Manila 2.5 lacks this feature which you can not turn on with GAZ TD2 Tools. But here is the solution. Install the cab and enjoy your Wi-Fi on demand feature.
http://forum.xda-developers.com/showthread.php?t=579965
Click to expand...
Click to collapse
Thanx very much for the tip off....yes it is working with Dutty's HG9 and now fixes my broken WM6.5.5 back to the former glory of 6.5.
mehmetkoksal said:
New ROM 6.5 with Manila 2.5 lacks this feature which you can not turn on with GAZ TD2 Tools. But here is the solution. Install the cab and enjoy your Wi-Fi on demand feature.
Click to expand...
Click to collapse
Works perfectly!
Thanks a lot, great help!
Marcher