Related
Hi,
After many hours of trying to get tomtom to work on my mini s I finally did it. Only one problem now is hopw do i get the voice files to work? I have transfered the voice cabs that i want over to the device and storage card and ran from there. Installed perfectly but still no voices within tomtom? What am i doing wrong?
cheers
Well, in the directory u find tomtom directory, make a new sub-dir with the name tomtom and put the voice files there.
so i put the new "tomtom" folder in mydocuments/tomtom?
eg.
my documents/tomtom/tomtom
then do i install from here?
cheers
Hi!
@ferritt: I'm really wondering why your TomTom Setup is so complicated (compared to mine)... Most of us just copied the correct voice.cab (UK Janes file is called engf.cab) to the device and started it (NOT installing to the Storage Card).
It creates a folder under /My Documents -> tomtom with the following files in it -> CurrentMap.dat, data02.chk (that should read data05.chk for english Jane) and data02.vif (data05.vif).
Final view:
/My Documents/tomtom/
CurrentMap.dat
data05.chk
data05.vif
Hope this helps.
Greetings
plant
see what i have mate is the voice files (cab) from my tomtom 5 cd. But also i have the .chk files aswell on another tomtom cd which is the only one i could get working. so should i just put them into the .chk files ionto the tomtom folder?
cheers
plantagoo said:
Hi!
@ferritt: I'm really wondering why your TomTom Setup is so complicated (compared to mine)... Most of us just copied the correct voice.cab (UK Janes file is called engf.cab) to the device and started it (NOT installing to the Storage Card).
It creates a folder under /My Documents -> tomtom with the following files in it -> CurrentMap.dat, data02.chk (that should read data05.chk for english Jane) and data02.vif (data05.vif).
Final view:
/My Documents/tomtom/
CurrentMap.dat
data05.chk
data05.vif
Hope this helps.
Greetings
plant
Click to expand...
Click to collapse
got it sorted at last
I was putting the files in the tomtom folder found in the root of the device not my documents.
cheers for ya help mate.
I would like to declare this thread closed. lol
cheers again
plantagoo said:
Most of us just copied the correct voice.cab (UK Janes file is called engf.cab) to the device and started it (NOT installing to the Storage Card).
Click to expand...
Click to collapse
It is perfectly possible to install everything to the Storage Card. There's a complete walkthrough here (for the Universal, but the Wizard is very similar)
Edit: added direct download here
I have managed to install the software on my V1640 by running the various CAB files but when i copy the maps CAB file onto my storage card and then try to install it it fails.
I have seen on the forum that somebody has suggested copying using a card reader but the only file i have is the CAB file so how do i do that.
Any help would be appreciated.
What version of tt are you installing? tt maps don't come on cab files.
Thanks for the reply
I have TomTom Nav 5 but that would not install so i downloaded the 5.21 which installed ok, but i had no GPS, Voices, maps etc. I found the info on the forum to intall the gps, wizard, voice cabs. I tried to install the maps from my map cd but when i run setup (needed to copy setup.exe from cd to desktop. if i tried to run from cd error 'Not enough free space on temporary folder can not run setup) select Great britain etc when i select the storage card reader (cf/MMC/SD) i get a error saying the 'volume not found'
Open up the installation Cd, copy the map folder to your storage card - that's all!
fmb2000 said:
Thanks for the reply
I have TomTom Nav 5 but that would not install so i downloaded the 5.21 which installed ok, but i had no GPS, Voices, maps etc. I found the info on the forum to intall the gps, wizard, voice cabs. I tried to install the maps from my map cd but when i run setup (needed to copy setup.exe from cd to desktop. if i tried to run from cd error 'Not enough free space on temporary folder can not run setup) select Great britain etc when i select the storage card reader (cf/MMC/SD) i get a error saying the 'volume not found'
Click to expand...
Click to collapse
Can you remeber which files you copied over to get it all going as im having the same problems
Try using a cardreader to copy the maps 8)
Hi
just got my XDA Mini S.
I have also bought a Holux GPSlim236 bluetooth GPS reciever.
I have NOT got a miniSD card... do I need one???
I have downloaded tomtom_5.21_wm2005_ppc_+crack with these files in the folder on my PC:
gps.cab
PIMAddIn.cab
ttn.cab
voice12.cab
wzd.cab
(FOLDER) crack with:
TomTom Navigator.exe
(FOLDER) TomTom with:
CurrentMap.dat
Is there any chance someone can write a install TomTom guide *for dummies* in real laymans terms?
Due to the amount of space required to by TomTom there is no way you're going to be able to install it on your device without extra space - eg miniSD card. They're reasonably cheap, compared to a few years ago, and you can get a 2Gb on eBay for about £35 to £40 or around half that if you just want to get a 1Gb card, which will be more than enough for TomTom.
Once you've done that, read this...
http://forum.xda-developers.com/viewtopic.php?t=29277
Right I'll pop out to Aria and get a miniSD
I read that link as well and it's very confusing...
I just want basic steps for an install to get tomtom sat nav working.
I had the same problem before and I ran across this article:
http://www.4winmobile.com/q-how-can-i-install-tomtom-navigator-5-on-wm5-devices-vt934.html
Probably it will help you in installing it correctly.
You definitely need to have mini SD card for this app.
DulYang
Not got the miniSD card yet but read the guide and am still not sure what to do.
Take your version 5 Application/Resource CD (probably CD1 or 6) and copy the contents of the CD to a folder on your desktop.
Download the latest update from TomTom currently v5.21 (28-12-05).
I have got 5.21 but it's not on CD
Copy the files that you just extracted to the folder on your desktop that contains the CD files and overwrite the existing “setup.exe” with the new one.
I have not extracted anything, and I don't have a file called setup.exe
Execute “setup.exe” and follow the instructions to install.
Now copy the next CD to a folder on your hard drive (EG:The map cd).
No CD
Follow steps 3 to 5
Keep repeating this process for all your CD’s, Maps, Voices, Post Codes.
do I need map files or do I have them???
Now most of the stuff (apart from maps & post codes) were installed in the main memory of my o2 XDA Exec even though I explicitly stated in the install to put them on the SD Card.
I rectified this by performing the following:
do I need to do any of this?
Create a folder on the SD Card called “TomTom”.
Cut the files from the folder “Navigator” which is in main memory under “\Program Files”.
These files are “TomTom Navigator.exe” & “data.chk”.
Paste these files into the folder “\Storage Card\TomTom”.
PLEASE NOTE:
Without the presence of a TomTom folder here the full postcode lookup, voices and schemes will fail if you move them to the Storage Card.
& Don’t forget to change the path of the shortcut under Start>Programs
You can use a 3rd party explorer like Resco Explorer for this
You can delete the “Navigator” folder from main memory now.
Create a folder called “voices” in the root of SD Card.
IE: “\Storage Card\voices”.
Cut the files inside “\My Documents\tomtom” which is in main memory, these files are the English UK voices. (You may have more).
“data04.chk”, “data04.vif”, “data05.chk” & “data05.vif”.
Created a folder called “schemes” in the root of SD Card.
IE: “\Storage Card\schemes”.
This is where I put all my downloaded schemes & the ones I created.
PLEASE NOTE:
If you are using a custom scheme don’t be alarmed when you load TomTom and your display looks a little bland, your custom scheme will appear when you have a valid GPS signal.
In the main memory there is “\TomTom” with the following files inside it.
“_do_not_remove.txt”, “go1108m.wav”, “tttoday.bmp”, “tttoday.dll” & “tttodayvga.bmp”.
These files are for the today screen pluggin.
Apparently, although I cannot confirm, these files can be deleted if you don’t use the TomTom today pluggin.
BUT THE FOLDER MUST REMAIN!
I suppose you could use Activesynch to remove this pluggin.
If you use custom menus you will have a folder inside this “TomTom” folder called “SDKRegistry”
and inside this folder will be a file called “TomTom.mnu “
I don’t use custom menu’s so I’m assuming this must stay where it is.
Now you need to create a text file called “CurrentMap.dat”.
Open the file & type & \Storage Card\Great_Britain-Map\
or whatever the name of your main map folder is on your SD card.
Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as "CurrentMap.dat". Make sure it doesn't end up as CurrentMap.dat.txt!
Put this file in the main memory of your PPC under “\My Documents\TomTom”.
PLEASE NOTE:
Without this file TomTom will tell you that you have no maps installed!
In the main memory, under “Program Files” there is a folder called “Conatcts Navigation”
IE: “\Program Files\Contacts Navigation”.
I think this needs to stay where it is in order for the contacts <> TomTom “navigate to/find on map” integration feature to work.
(Eg. Select a contact from your address book and find them on the map/navigate to them)
At this stage you should pair your Bluetooth GPS Receiver before launching TomTom.
I have the Bluetooth GPS listed but it says COM6, does this matter?
Start>Settings>Connections>Bluetooth> Turn on bluetooth.
Turn on your Bluetooth GPS receiver.
Click on “devices” tab and then on “new Partnership”
Wait for the scan.
Select “BT GPS” (or whatever your's is called).
Click on "next" Enter passkey (mine was "0000")
Check your GPS Receiver's manual.
Click on "next"
Once properly paired, put a check next to "Serial Port" as the device's available service.
click "Finish".
Click on "COM Ports" Tab
Click "New Outgoing Port", select "BT GPS" (or whatever your's is called).
click "next".
Set COM port to "COM4", while leaving Secured Connection still checked.
If that doesn’t work, choose a different COM port.
Click "Finish" and your device should now be listed with (COM4) next to it.
Now load up TomTom.
During setup you will be asked to specify your GPS hardware.
Select "Other Bluetooth GPS" then select "COM4".
PLEASE NOTE:
In future you don’t need to enable bluetooth, just load Tom Tom and it does it for you.
PLEASE NOTE:
IF FLIGHT MODE ON YOUR PDA IS ON, YOU WILL NOT GET A GPS SIGNAL, EVEN IF BLUETOOTH IS ON!
and now all should work
Dam I'm Good!!
To summarize all this, here is my directory structure.
Is this on the XDA Mini S or his PC?
MAIN MEMORY:
\My Documents\TomTom\CurrentMap.dat, great_britain_plus-7777ac9g (This is your registration details in the format "<map name>-<letters&numbers)
\Program Files\Contacts Navigation\<20 dll files>
\TomTom\_do_not_remove.txt, go1108m.wav, tttoday.bmp, tttoday.dll & tttodayvga.bmp
\TomTom\SdkFileCalls\<empty>
STORAGE CARD:
\Storage Card\Great_Britain_Plus-Map\<map files & POI files here>
\Storage Card\Great_Britain-Map\<map files & POI files here>
\Storage Card\schemes\<custom schemes in here>
\Storage Card\TomTom\data.chk, navigator.cfg & TomTom Navigator.exe
\Storage Card\voices\blah.chk, blah.vif & blah.bmp (for custom voice files)
\Storage Card\zip\great_britain.postal (7 digit post code lookup)
Click to expand...
Click to collapse
Can anyone tell me exactly what I need to do in my scenario please with the files I listed in my first post?
JohnHamer19677 wrote:
<<
Can anyone tell me exactly what I need to do in my scenario please with the files I listed in my first post?
>>
Ok, I got it now.
You just have the files cracked from somewhere on the Internet.
In order for this guide to work, you need to have the original TomTom CD 5.0 that includes all the maps, voices etc. ( I believe it was 6 CDs altogehter)
The one that you have is just the "cracked" version of TomTom exe file without any maps to use. That's why it's just a couple of MB in size.
The latest part of the guide is showing the structure of the Wizard, not PC.
DulYang
1. Go and buy a copy of TomTom.
2. Follow the instructions.
Please do not ask for help with cracked/pirate software on this forum, it is not what we are about.
OK mate :roll:
findus said:
1. Go and buy a copy of TomTom.
2. Follow the instructions.
Please do not ask for help with cracked/pirate software on this forum, it is not what we are about.
Click to expand...
Click to collapse
Although I agree with you it would be a first on this forum!!! LOL. Just look at the FTP site! Full of illegal ROMs etc.
OK...
I have now aquired a copy of 5.21 + a 1gig mininSD card
1. I the TomTom Navigator folder onto a new miniSD card
2. Put the card into the slot on the XDA
3. Clicked tomtom navigator.e x e
4. Program starts up and a Legal Notice screen appears
5. Click I Agree
6. Comes up with Can Not Find Maps
So I copy "Great_Britain_Plus-Map" folder to the miniSD card
And I copy "Great_Britain-Map" folder to the miniSD card
Repeat steps 1-5 but then it just hangs... I need to reboot the XDA to make it work again.
Any ideas on what to try next?
Progress...
I have installed the TomTom program from the update on he TomTom site!!!
It installed to the XDA not the miniSD but not problems.
Now where do I put the maps???
and voices???
I have put Great_Britain-Map onto the miniSD card but it's saying:
No Maps Found!
JohnHamer19677 wrote:
<<
No Maps Found!
>>
You need to install the maps and voices by running the setup.exe from the CD and pick install. That way all the necessary files will be copied over to your Mini D card by the CD installer.
Then if you follow the instruction that I gave you, you would notice step 10.
Step 10 said:
Now you need to create a text file called “CurrentMap.dat”.
Open the file & type & \Storage Card\Great_Britain-Map\
or whatever the name of your main map folder is on your SD card.
Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as "CurrentMap.dat". Make sure it doesn't end up as CurrentMap.dat.txt!
Put this file in the main memory of your PPC under “\My Documents\TomTom”.
PLEASE NOTE:
Without this file TomTom will tell you that you have no maps installed!
DulYang
Right I got it to find Great_Britain_Plus-map but now it's asking me to activate
JohnHamer19677 wrote:
<<
Right I got it to find Great_Britain_Plus-map but now it's asking me to activate
>>
Now this is the time for you to replace the original exe file on your device with the cracked one that you got from the Internet.
I guarantee you it won't ask you for nothing else.
Good luck.
DulYang
Wha hey!!
Sorted now... I had to get another Great-Britain-map to get rid of the activation screen I'd already done the exe swap.
Notice the differance in the under score and dash from the one I downloaded. Don't know if that made a differance.
Now all I had to do was switch maps over to the GB-plus map and I was away.
GPSlim236 picked up my location immediatly from inside downstairs no problems.
Thanks for everyones help especially dulyang.
Ok heres another dummy that has go all the bits but hasn't a clue how to install tomtom on my wizard. (I've had them for 6 months now lol)
Now that you have sucessfully sorted yours John could you write a simple step by step instruction for others ? you will have a better idea than most where existing instructions are a bit vague or ambiguous etc.
Hi Everybody!!! :?
Where do I place my voices folder?
I have a voices folder on my storage card, in my tomtom folder , but also have a voices folder on my device in the tomtom folder there?
When Istart the program and try to change the voice, the voices are greyed out and won't let me select any of them.
Thanks for any replies
{>
peanut said:
Ok heres another dummy that has go all the bits but hasn't a clue how to install tomtom on my wizard. (I've had them for 6 months now lol)
Now that you have sucessfully sorted yours John could you write a simple step by step instruction for others ? you will have a better idea than most where existing instructions are a bit vague or ambiguous etc.
Click to expand...
Click to collapse
Hi mate,
1. 1st download 5.21 from tomtom http://www.tomtom.com/support/index.php?FID=3361&Lid=1
it's about a quater of the way down the page...
I know you prob have 5.21 but so did I and it didn't install right but the one from tomtom's site did it perfectly... IT'S FREE!!!
2. Have you XDA plugged into your PC using the lead and the Active Sync program.
3. Double click the .exe you just downloaded from tomtom
it will start running on the PC but install to the XDA... follow the on screen instructions on the PC and then follow them on the XDA.
4. Now all you have to do is put your miniSD card in your card reader and drop the maps from the PC to the miniSD card.
You might have to extract to the miniSD card if they are zipped files as extracting them to your PC then drag and dropping didn't work for me.
5. If you have a crack you need to copy the TomTom Navigator.exe out of your Crack folder and replace the one that's in > programs > navigator > on your XDA.
I used the Active Sync "explorer" to navigate to these files.
6. Once that's done just start tomtom and wait it takes a min or so to load and you should get some on scren instructions... go through these and that should be it.
Hi I've searched the forums for help on installing IGO 8 and haven't come up with anything that can help me. I have installed IGO 8 on my Diamond but when I try to run it I get the error "Program application database cannot be found. Please insert original application SD card". I'm not sure what this means as I am new to using a smartphone. So if someone would be able to help me out that would be great, thank you.
Search about file SYS.TXT file located in your IGO8 directory.
Open it.
Change row:
app="%SDCARD%/iGO8"
with:
app="Internal Storage/iGO8"
Soft reset and try again.
Good look!
If you have installed igo8 through 2577/autorun, make sure you make the above mentioned changes to the sys file located in My Device/Program Files/igo8 folder.
IGo 8 works realy nice with Diamond. Good luck.
igo8 after install notting opens
Hi friends, I install igo8 through 2577/autorun, however total installation file size is 90mb but the installation process finishes in 15 seconds.Is this normal?
And after the install I push igo8 icon under programs menu but nothing happens.
Device rom is official 2.03.456.2 WWE
I need your advices.
Thanks a lot for the replies.
gtdaniel said:
Search about file SYS.TXT file located in your IGO8 directory.
Open it.
Change row:
app="%SDCARD%/iGO8"
with:
app="Internal Storage/iGO8"
Soft reset and try again.
Good look!
Click to expand...
Click to collapse
In my HTC HD I had the same problem. I checked the SYS.TXT you were talking bout and it was configured correctly (app="Internal Storage/iGO8").
But I still had the same problem.
I found the problem though... I had my iGo8 folder inside another folder (Internal Storage/GPS Utils/iGO8), so in order for this to work you have either to have it as a root foldr on the IS/SC or correct the path...
- Do not use the autorun! (you can delete from start the folder 2577)
- Rename the file application.dat in iGO8.exe
- Edit the SYS.TXT end modify as:
FROM
[folders]
app=”%SDCARD%/iGO8″
IN TO
[folders]
app=”Internal Storage/iGO8″
Save and copy iGO8 from PC in Internal Storage (direct in the root).
How can I make a shortcut like that? I always have to launch the program entering via explorer.
morbon said:
How can I make a shortcut like that? I always have to launch the program entering via explorer.
Click to expand...
Click to collapse
With Total Commander.
morbon said:
How can I make a shortcut like that? I always have to launch the program entering via explorer.
Click to expand...
Click to collapse
I'm doing it this way: Tap and Hold your IGo8.exe - Copy - "Paste shortcut" in "/Windows/Startmenu/Programs"
Ive done this but now it says Program application cannot be found. Please insert original SD card.
Well I sorted that out and now the application opens and then shows the start up screen then closes and when I try to open it again it goes The application failed to start last time. do you want to factory reset defaults.
Any ideas?
khsbenny said:
Ive done this but now it says Program application cannot be found. Please insert original SD card.
Well I sorted that out and now the application opens and then shows the start up screen then closes and when I try to open it again it goes The application failed to start last time. do you want to factory reset defaults.
Any ideas?
Click to expand...
Click to collapse
You are using wrong version.
try 8.3.2.97313 july-2009 PDA version
Removed warez link
alijan said:
You are using wrong version.
try 8.3.2.97313 july-2009 PDA version
This is warez!
Click to expand...
Click to collapse
alijan said:
You are using wrong version.
try 8.3.2.97313 july-2009 PDA version
Removed warez link
Click to expand...
Click to collapse
Watch what you post, warez isn't allowed.
Final warning
Have Tevion gps device, wince 4.2, no usb port, just sd card. It have Igo8 software that loads automatically on boot. I managed to unlock device with some program and gain access to all win folders. Then, accidentally, I moved some important file from Flash Disk on internal memory and now device just boot to splash screen and nothing more. That file called Igolaunch.exe and I have it, just don't have access anymore to windows files to copy it on right place. Without that file device don't know what to do, and do nothing, just boot to splash image. The windows files, registry, are intact, just need to copy back Igolaunch.exe to it's original location. So, is there any way to gain access to win files again, like force load some explorer from sd card on boot, or something like that, just to copy back the file? Any other solution, some reset, maybe? Thanks.
Try this: http://www.austech.info/gps/84958-gps-ce-6-0-rescue-disk.html
Note: You must register with Austech to see the download link.
YESSS! Success!
Thank you very much! This is just that I needed! Followed instructions and boot in explorer (desktop), copy-back the igolaunch.exe to it's original location and everything working again! Thanks again!
snebojsa said:
Have Tevion gps device, wince 4.2, no usb port, just sd card. It have Igo8 software that loads automatically on boot. I managed to unlock device with some program and gain access to all win folders. Then, accidentally, I moved some important file from Flash Disk on internal memory and now device just boot to splash screen and nothing more. That file called Igolaunch.exe and I have it, just don't have access anymore to windows files to copy it on right place. Without that file device don't know what to do, and do nothing, just boot to splash image. The windows files, registry, are intact, just need to copy back Igolaunch.exe to it's original location. So, is there any way to gain access to win files again, like force load some explorer from sd card on boot, or something like that, just to copy back the file? Any other solution, some reset, maybe? Thanks.
Click to expand...
Click to collapse
Ive a Clarion NICE 7 GPS system with WinCE NET 4.2 core. Its running on their software. It have no menu,no taskbar,nothin ,but It have a USB port and no SD card slot. I need help with this , help me. I need help to get access to win files and folders. And is there any way to flash/crack/hack/root this device to Win CE 6 or something?:crying:
Did you try that what @jwoegerbauer said? With his software i was able to access files on device. Because you don't have sd card, try to connect device to pc and put files on internal storage.
For wince 6.0, think not.
snebojsa said:
Did you try that what @jwoegerbauer said? With his software i was able to access files on device. Because you don't have sd card, try to connect device to pc and put files on internal storage.
For wince 6.0, think not.
Click to expand...
Click to collapse
Hey,
i didnt find any link to the software u r talking about. where to find it?
and if it didnt work, any other method to install WinCE 6 or android to this device(running CE 4.2) ?
plz help:crying::crying:
Go to the link he posted, register on site and you will see the link.
snebojsa said:
Go to the link he posted, register on site and you will see the link.
Click to expand...
Click to collapse
This is how my menu displays and i want to change it into CE6 ! but the software (in link) is not working
need help :crying::crying:
First you wrote that you need help to get access to win files and folders, that software enable you to do that.
If you want to change appearance and gps software that device is using, you need to unlock device. There is a lot of tutorials how to do that, just google it. For example, you can try this:
http://gpsunderground.com/forum/other-device-unlock/5844-how-unlock-any-gps-wce-4-2-5-6-a.html
Help
hey,
now i got a china gps (MSUR S430) , and i think the software was deleted. i dont know. its showing
"The storage flash has no invalid data,
now formate it and program it through SD/MMC card
...........................................................................
...........................................................................
...........................................................................
detecting SD/MMC card.... not found "
Only showing this. after inserting blank SD/MMC its showing MSUR and stuck at that .Is there any way to reset it or insert a new software?
this is my only device i have.
please help. need help
MSUR S430
A quick internet search using Bing resulted in
>>>>>>>>>>>> Chinese text
版本号：1.0
地图大小：10M
适用机型：4.3寸～5寸导航等无机身内存机型（480×272）
使用说明：
1、下程序包： 点击此处下载，下载Shell.ini：点击此处下载
2、下载到的程序包为RAR文件压缩包，请先在电脑进行解压缩
3、将解压后的“名讯科技”文件夹和“Shell.ini”复制到储存卡
4、点击主界面“导航”图标，能出现上图代表成功，接下来只需要复制相应地图到储存卡中即可
如果无效请再进行下列步骤：
1、打开导航仪进入“设置”，然后选“GPS导航路径”设置，点击中间按钮进入设置，依次双击选择 sdmmc --> 名讯科技 --> MSUR.EXE；然后保存设置（右上角“方形”的图标）
2、点击主界面“导航”图标，出现上图代表成功，接下来只需要复制相应地图到储存卡即可
>>>>>>>>>>>> Translated to English:
Version number: 1.0
Map size: 10M
For use on: 4.3 inch ~5 inch navigation without fuselage memory models (480x272)
Instructions for use:
1, under the package: click here to download, download Shell.ini: click here to download
2, download the RAR file cabinet for the package, first in the computer to extract
3, after extraction of the "information technology" folder and the "Shell.ini" copy to memory card
4, click on the main interface of "navigation" icon will appear above represent success, then only need to copy the corresponding map to the storage card can be
If that doesn't work, please do the following steps:
1, open the Navigator to enter "settings", then select "GPS navigation path" setting, click on the middle button to enter the Setup, double-click Select sdmmc technology--> MSUR-->. EXE and then save settings (top right corner "square" icon)
2, click on the main interface of "navigation" icon represents a success appear, then just copy the appropriate map to memory card
>>>>>>>>>>>> Resume
What I suspect is, that your unit expects a file named shell.ini in root of SD-card is present - with which the MSUR S430 indeed gets and/or can be steered.
jwoegerbauer said:
A quick internet search using Bing resulted in
>>>>>>>>>>>> Chinese text
版本号：1.0
地图大小：10M
适用机型：4.3寸～5寸导航等无机身内存机型（480×272）
使用说明：
1、下程序包： 点击此处下载，下载Shell.ini：点击此处下载
2、下载到的程序包为RAR文件压缩包，请先在电脑进行解压缩
3、将解压后的“名讯科技”文件夹和“Shell.ini”复制到储存卡
4、点击主界面“导航”图标，能出现上图代表成功，接下来只需要复制相应地图到储存卡中即可
如果无效请再进行下列步骤：
1、打开导航仪进入“设置”，然后选“GPS导航路径”设置，点击中间按钮进入设置，依次双击选择 sdmmc --> 名讯科技 --> MSUR.EXE；然后保存设置（右上角“方形”的图标）
2、点击主界面“导航”图标，出现上图代表成功，接下来只需要复制相应地图到储存卡即可
>>>>>>>>>>>> Translated to English:
Version number: 1.0
Map size: 10M
For use on: 4.3 inch ~5 inch navigation without fuselage memory models (480x272)
Instructions for use:
1, under the package: click here to download, download Shell.ini: click here to download
2, download the RAR file cabinet for the package, first in the computer to extract
3, after extraction of the "information technology" folder and the "Shell.ini" copy to memory card
4, click on the main interface of "navigation" icon will appear above represent success, then only need to copy the corresponding map to the storage card can be
If that doesn't work, please do the following steps:
1, open the Navigator to enter "settings", then select "GPS navigation path" setting, click on the middle button to enter the Setup, double-click Select sdmmc technology--> MSUR-->. EXE and then save settings (top right corner "square" icon)
2, click on the main interface of "navigation" icon represents a success appear, then just copy the appropriate map to memory card
>>>>>>>>>>>> Resume
What I suspect is, that your unit expects a file named shell.ini in root of SD-card is present - with which the MSUR S430 indeed gets and/or can be steered.
Click to expand...
Click to collapse
Thanks for the reply. I understand everything.
But only problem is How and where o download this (above mentioned) cab file and shell.ini file ? how did u find suggestions about MSUR S430?
waiting for ur reply
bellu1911 said:
Thanks for the reply. I understand everything.
But only problem is How and where o download this (above mentioned) cab file and shell.ini file ? how did u find suggestions about MSUR S430?
waiting for ur reply
Click to expand...
Click to collapse
I suggest you ask them directly your questions: http://www.msur.com.cn/zh-cn/feedback.asp
Is there any chance that i can boot wince 4.2 or 5 in this device? Looks like its bricked. Is itpossible to installcustom firmware like miopocket or tomtom or navigator etc? Or just plain win CE ?