My camera button will fire up the camera fine, but it becomes inactive after that. In other words it can't be used to focus or take the shot. I have to use the fiddly D-Pad to take a picture.
It seems this might be a button mapping issue, I am using AEButton Plus, but even shutting down that process hasn't solved the problem. I am sure this could be fixed by a registry setting.
I really can't take the hard-reset option as I have spent a long time getting everything how I want it and restoring a backup afterwards will cause the problem to come back.
Any ideas would be appreciated.
Have you noticed that the camera button has 2 "pressure points" - like regual cams have as well?
Pressing slightly sets teh focus and pressing further/longer enables the shutter.
Some people reported similar problems and pressign the button longer/deeper, solved it.
Eric
Eric X1 said:
Have you noticed that the camera button has 2 "pressure points" - like regual cams have as well?
Pressing slightly sets teh focus and pressing further/longer enables the shutter.
Some people reported similar problems and pressign the button longer/deeper, solved it.
Eric
Click to expand...
Click to collapse
Thanks for replying...
Yes I am aware of the 2 stage push and it was all working fine 'out of the box' So I am sure that this is a registry change of some kind.
You managed to solve the problem? Just realized I'm facing this problem too.
Found the problem. For my case, think it had to do with the TF3D I installed (or at least the beta 1). Was ok when I did a hard reset, and now with beta 2 installed, it works fine too.
ipporek said:
Found the problem. For my case, think it had to do with the TF3D I installed (or at least the beta 1). Was ok when I did a hard reset, and now with beta 2 installed, it works fine too.
Click to expand...
Click to collapse
Hi, yes can confirm that beta 1 seemed to be the problem. The button is now working as normal
Related
Hi All,
I have a strange problem, tried to search the forum,
without success...
Sometimes the OK button doesn't response (both OK buttons...),
only clicking OK on the screen works.
another issue - sometimes when clicking the action button nothing happens, or even worse - it acts like a long press even when I press it really shortly...
Any one else had such problems?
Is it (as I guess) a hardware problem?
I have the same problem and I dont think its the hardware cause the button is not presented in "buttonmapping" in the controlpanel. This has worked before. Please respond if you solve the problem.
Mine does it on occasion. Pretty sure it's software and It seems to happen with the same apps each time. Make note of what apps you have running when it happens.
Just started doing it again but I realized that I have never had a prob with the OK or Start Menu buttons but rather the softkeys. In Today Agenda, the left key (edit) stopped working and then a few minutes later the right key (menu) stopped working. I closed all apps and the problem persisted with every appointment I opened. Soft reset fixed it.
I should also add that I am not using the latest version of Today Agenda because I have not figured out how to make it look like the version I am used to.
Might be related: a lot of games I have tried don't seem to support the softbuttons, phone buttons, or really much else besides the directional pad and center select button.
This is my first post and I must say that this is a great group of people who know what they are talking about!
Anyways, I have had my 8525 for about two weeks and I am loving it. For whatever reason some of my buttons do not work! The dpad works but the two soft buttons, the start button, ok button, email, PIE, and the green and red buttons don't work. The power, scroller, comm manager, the left ok button and the PTT all DO work. I did a hard reset hoping that would fix it but no luck. I been installing and trying a lot of programs but I thought after the hard reset that any program that screwed this up would be gone. Please help I love this phone and really don't want to take it back.
Thanks,
Dan
I took it back and that solved all of my problems.
you took back , what?
i am having the same issue with a HTC Tytn.
terracot said:
i am having the same issue with a HTC Tytn.
Click to expand...
Click to collapse
My hermes has a similar problem, buttons under the screen sometimes won't work, but if I turn off backlight and turn on, it works... but not very well because if I press green button then red button continually, buttons don't work again after few pressions....
I have changed my ROM but it's the same, it isn't a hardware problem because if I turn the scroll it works again...
This problem is known?
Thank you very muche for your help and sorry for my bad english.
same issue with my TyTN...
Same issue here with Tytn, buttons won't work but if I use scroll button a bit then buttons work again.
Hey guys,
Exactly the same problem here and it's infuriating when I'm trying to make calls on the run and sometimes I can't even pick up calls.
I have an I-mate Jasjam ROM 1.31.305.2.
If anyone has any fixes or solutions that would be great. Or do I have to send it in for repair or something?
So has anyone managed to fix this? Anyone tried a hard reset?
I have no idea how to diagnose the issue and even whether it's a software or hardware fault.
Jasjam- Same here
Also my screen turnes white some times
mattytj said:
So has anyone managed to fix this? Anyone tried a hard reset?
I have no idea how to diagnose the issue and even whether it's a software or hardware fault.
Click to expand...
Click to collapse
I'm also having these problems with the front buttons not working. Very frustrating. The problems seem to be platform independent.
I really cannot believe this. When I used the search function I noticed so many people are having these problems with the TyTN, and no resolve.
It's my second machine I received from HTC, first one also had these problems.
HTC sucks BIGTIME.
It first started with the blue light blinking, even with the phone turned off. The only way to stop it from blinking was to remove the battery for about 10 seconds.
Then, everything I typed staarted to ddoublle letteers raandomlyy.
Now, it's acting like the down button is stuck. I can't do anything on the phone because its always scrolling down, beating out any other input.
I can live with the first two, but the third one has made the phone completely unusable. It's never been around water, never dropped, just randomly doing this crap. Any ideas on how to fix it? Hard reset does not work, new rom does not work, its a hardware issue.
Yes it is probably a hardware issue. Time for a phone swap
I'm actually out of warranty, so the only thing I can do it either switch to a different phone or try fixing this one. Have nothing to lose by opening it up, just wanted to see if anyone else has fixed it by cutting any wires or connections on the inside of the phone.
You don't have insurance
drewcam888 said:
You don't have insurance
Click to expand...
Click to collapse
No phone insurance. Verizon completely screwed me on that phone purchase in more ways than one. By the time I figured that out it was to late.
TO bad I got mine added late. I just called the lady I bought the phone from and she added it.
Not sure about the blue-light.
I was able to fix my repeating-letters using the keyboard fix in this post:
For the constant-down input - it could either be the touchscreen digitizer or the hardware keyboard. YouTube has a series of videos on dismantling the Mogul - it may be worth some "exploratory surgery" to see what might be causing the problem (cookie crumbs, perhaps)...
Hope this helps. Good luck.
Htc mogul hardware button - issue
Dear XDA GURUS,
I am facing this very weird problem on my HTC MOGUL. All my Hardware button have stopped responding / Working. Please help me sort out this issue.
Waiting for your valued reply with solution.
Detail given on below link.
My HTC MOGUL HARDWARE Button Issue
Dear XDA GURUS,
yesterday i tried to do some RnD for this same problem. now the inputs. (Nothing technical)
* Even though my camera hardware button is not working, but, i can still enter the bootloader screen.
* Even though my both soft reset hardware button are not working, but, still i can do the hard reset.
This only means that, my buttons are working fine, but, according to my logic, they have lost there assignment.
After that i started searching web, if i can find a App / setting / hack / register setting, in which i can assign then there original key setting. So i found this on XDA forum as below.
Code:
[B]How to assign a shortcut to EndKey, SendKey, Power Button, PTT Button!![/B]
Hello
Since some of you guys asked about this , well there you go:
if you look inside the keyboard driver with a good disassembler (IDA Pro) you would see that you can create these link files :
Long_PTT.lnk (push to talk button+long press)
Long_End.lnk (the read key+long press)
Long_Send.lnk (the green key+long press)
Short_PTT.lnk (push to talk button)
Long_Power.lnk (Power button +long press)
Short_Power.lnk (Power button)
So basically all you need is to create these link files and put them in to windows folder. You can assign these keys to any shortcut you want .
Source: http://forum.xda-developers.com/showthread.php?t=356322
ok now, certain things are clear. now anybody out there can help get this thing sorted out.
Waiting for concrete solution.
Any one else had issues with the centre windows button not working?
I'm not sure if it's hardware as in the button is actually not working or more of a software freeze. An example would be on the home screen pressing the windows button and literally nothing happens. touching start in the top left however works everytime.
A simple power on/off of the device solves the issue but its been happening a few times this week and is becoming annoying.
The more apps and tweaks I do to my phone, the more unstable it seems to get. Has anyone else noticed this? Just little things, like for example a few times my lock screen with "password" has reverted to windows classic style but then a screen off / screen on will bring it back again to the WM6.5 lock screen with slider.
Just overall slightly odd behaviour.
I may have recently installed something that the device doesn't like too much, but if so I am unsure what software it is. I'm tempted to save all patches I have, and write down the adjustments I've done and perform a hard reset, the phone definitely was not like this when I got it only 2 weeks ago.
I wonder if anyone else has had anything similar or if its just my phone?
Seems like a hard reset is required. My o/s seems very stable, the only problem I have in that regard is the odd freezing of the messaging app.
It just happened to me after reading this post :-O
another hardware failure case...good job HTC...
dgtel2 said:
another hardware failure case...good job HTC...
Click to expand...
Click to collapse
Elmo-85 said:
A simple power on/off of the device solves the issue
Click to expand...
Click to collapse
@dgtel2
Could you please explain how this "hardware failure" is temporarily fixed by a reset?
Another "reading failure", and simply blame HTC. Good job dgtel2.
When we reset, we need to hold the "call-off" button. That's not a good design due to excessive pressure to the edge of the "capacitive" screen. They should have introduced separate turn-off button. Over time, the buttons/screen will get affected (but for new unit, it's pretty unlikely...).
So, to reset using the red reset button, it is located underneath the "so-hard-to-open" back cover. Over time, again, will affect the capacitive screen.
But, the problem could be due to both hardware and software issue. Just send it back to the vendor. Less headache...
Yeh its definitely not a hardware fault. Its more like a freeze or slight confusion between WM6.5 and sense somewhere along the line....
I've thought of another thing which would also come under this weird behaviour category.
I noticed today whilst watching a video on the youtube app, using the up and down volume buttons on the side of the device would make the video freeze for abpproximately 1 second each time the button was pressed, it would change the volume up or down, but the bar would not appear on the screen so you have no idea what the level of volume actually is.
again soft reset solved this, but its just another on of those weird things
Back up and hard reset all the way.
dgtel2 said:
When we reset, we need to hold the "call-off" button. That's not a good design due to excessive pressure to the edge of the "capacitive" screen.
Click to expand...
Click to collapse
Don't use excessive pressure.
Why the "" round capacitive?
just a "make-up" ...lol ... again...those "..."
Hello all,
I've been using ZUK Z1 for just about a week now and everything was fine until a couple of days ago when I could not unlock the phone after a call - the power button and the home button turned the screen on for a split of a second and then the screen went off again without reacting to any taps. I had to restart the phone by pressing the power button + the volume down button. I tried to reproduce the issue, but did not succeed.
Yesterday, I had the same issue twice and then I finally got it how to reproduce the problem The main condition seems to be ending the call when the screen is off. That can be achieved by holding the phone close to your ear when the call it ended by the other party or ending the call by pressing the power button (you need to turn on that setting beforehand) again while holding the phone close to your ear.
Another guy on another forum wrote that had experienced the same issue once and yet another guy mentioned that there was such an issue with Cyanogen on OnePlusOne, but it was fixed in one of the updates.
I'm currently on 12.1-YOG4PAS3OH and I'm not sure whether it is a Cyanogen issue alone or an issue caused by interaction of Cyanogen and some of the applications installed. I'm inclined to believe that it's the latter, otherwise there would be a lot of people who ran into the issue.
This weekend, if time permits, I'm going to try uninstalling the applications one by one to find out whether any of them contribute the issue, but maybe some of you have already done some investigation or know how fix the issue. I would appreciate your input.
Thanks.
Hi there, i am facing the same issue since two days now
First i am unable to come up with the physical home button issue and now there is this new issue. The phone does not respond after a call and the screen remains off and does not respond to any touch (double tap) or even the power button and home button pressed. I had to take the mobile into the recovery mode via home buttons power button and volume rockers. Is there any possibility of this getting fixed. I think i made a huge mistake purchasing this phone.. Slowly getting into problems one by one.. First the physical home button issue then this screen off issue. Checking for updates daily but seems like ZUK officials and Cyanogen are sleeping! Highly disappointed!!!!
In the meantime, I uninstalled most of the applications and the issue was still there Then I tried to play with different settings and it seems I have nailed it. After disabling turning on the screen by double tap (I'm not sure how the setting reads in English, I'm using the Russian interface), I cannot longer reproduce the issue.
Sydarij, could you, please, check whether the setting is on in your case and, if it is, turn it off and try to reproduce the issue with the screen?
ingtrans said:
In the meantime, I uninstalled most of the applications and the issue was still there Then I tried to play with different settings and it seems I have nailed it. After disabling turning on the screen by double tap (I'm not sure how the setting reads in English, I'm using the Russian interface), I cannot longer reproduce the issue.
Sydarij, could you, please, check whether the setting is on in your case and, if it is, turn it off and try to reproduce the issue with the screen?
Click to expand...
Click to collapse
Do you mean after turning off the tap to wake option on your ZUK, you are no longer facing such issue?
Sydarij said:
Do you mean after turning off the tap to wake option on your ZUK, you are no longer facing such issue?
Click to expand...
Click to collapse
Yes, that's what it seems. With the option turned on I could reproduce the issue (just 1 or 2 tries were needed), while with the option turned off I could not reproduce the issue at all.
ingtrans said:
Yes, that's what it seems. With the option turned on I could reproduce the issue (just 1 or 2 tries were needed), while with the option turned off I could not reproduce the issue at all.
Click to expand...
Click to collapse
After turning off this feature, the device unlocks by itself without me waking it up. Turning the feature off doesn't seem to help buddy!
Sydarij said:
After turning off this feature, the device unlocks by itself without me waking it up. Turning the feature off doesn't seem to help buddy!
Click to expand...
Click to collapse
This seems to be a different problem. How the option for preventing accidental wake-up is set? (It's just below the double tap option. )
In any case, one owner on another forum complained about the accidental wake-up issue despite the setting was on, but he meddled with the firmware before that...
ingtrans said:
This seems to be a different problem. How the option for preventing accidental wake-up is set? (It's just below the double tap option. )
In any case, one owner on another forum complained about the accidental wake-up issue despite the setting was on, but he meddled with the firmware before that...
Click to expand...
Click to collapse
Yes, the accidental wake up is set yet the issue cannot be resolved. Any other way you can resolve this and prevent the issue from reproducing? In my opinion, ZUK and Cyanogen officials are asleep after launching their new flagship. Dont see any updates coming from them since last 2 months. highly disappointed with this!
Sydarij said:
Any other way you can resolve this and prevent the issue from reproducing?
Click to expand...
Click to collapse
No idea. The solution I found seems to work well for me, at least I have not had any issues since I applied it.
Please turn on adaptive brightness. Issue will be resolved
ingtrans said:
Hello all,
I've been using ZUK Z1 for just about a week now and everything was fine until a couple of days ago when I could not unlock the phone after a call - the power button and the home button turned the screen on for a split of a second and then the screen went off again without reacting to any taps. I had to restart the phone by pressing the power button + the volume down button. I tried to reproduce the issue, but did not succeed.
Yesterday, I had the same issue twice and then I finally got it how to reproduce the problem The main condition seems to be ending the call when the screen is off. That can be achieved by holding the phone close to your ear when the call it ended by the other party or ending the call by pressing the power button (you need to turn on that setting beforehand) again while holding the phone close to your ear.
Another guy on another forum wrote that had experienced the same issue once and yet another guy mentioned that there was such an issue with Cyanogen on OnePlusOne, but it was fixed in one of the updates.
I'm currently on 12.1-YOG4PAS3OH and I'm not sure whether it is a Cyanogen issue alone or an issue caused by interaction of Cyanogen and some of the applications installed. I'm inclined to believe that it's the latter, otherwise there would be a lot of people who ran into the issue.
This weekend, if time permits, I'm going to try uninstalling the applications one by one to find out whether any of them contribute the issue, but maybe some of you have already done some investigation or know how fix the issue. I would appreciate your input.
Thanks.
Click to expand...
Click to collapse
Hi! I'm facing the same issue for the last 3 days. I felt everytime there is any moisture of sweat on the ear piece the phone hangs and doesn't get unlocked.
Will try shutting the double tap options. Hope it works! This is the first time I've brought anything in the launch sale without reading reviews. Hope I don't regret this.
sir when call come rintone accor but calling display doesn,t show
when i press phone icon in menu then it shows
phone is lenovo zuk z1
screen freezes during/after call !!
did you solve this problem?
i too have posted the same problem here ..
any sugesstions?
i am facing a black screen while calling and receiving calls on my zuk z1 .. any solution? and where do i find the proximity setting in my settings?