Is there any cover that covers the camera's lens? I have read about several people having broken glass on the battery cover and now I join the group. I know glass doesn't scratch as easy as plastic, but it's horribly thin
Huh... i didn't realize that the lens cover was actually glass. Well, the Invisible Shield whole device cover comes with a piece that you can apply over the lens cover that has a pre-punched hole to not obstruct the lens.
momentarylapseofreason said:
Is there any cover that covers the camera's lens? I have read about several people having broken glass on the battery cover and now I join the group. I know glass doesn't scratch as easy as plastic, but it's horribly thin
Click to expand...
Click to collapse
I had the same issue. I called the store I bought it at and told the manager I noticed mine was missing the back glass piece. I said I never noticed it (I peeled it off) and asked if they could replace the battery cover since I just bought the phone. They did it with no questions asked. If you tell them you cracked it I doubt they will replace it.
afliction523 said:
I had the same issue. I called the store I bought it at and told the manager I noticed mine was missing the back glass piece. I said I never noticed it (I peeled it off) and asked if they could replace the battery cover since I just bought the phone. They did it with no questions asked. If you tell them you cracked it I doubt they will replace it.
Click to expand...
Click to collapse
haha...good idea!
Related
The digitizers on eBay prob aren't gorilla glass, right? Can you get replacement that is real?
Did you replace it or not? i am interested in how you brake it considering it is gorilla glass. How much force need to brake it?
dropping Gorillia Glass in the wrong angle will break it!
True. Mine got dropped on the upper left edge of the phone(and it was from the height of 1m or less) and it got shaterd. Now I am searching for replacement. The phone and the screen still work but it just looks ugly.
edit* my post doesn't apply for this thread lol but it seems defy is brickproof also.
yes it can broke, it's just scratch resistant, not broke-into-pieces resistant.
Yep, I can confirm it's not shatterproof!
Hi everyone,
I just received my new digitizer from Ecell and it's glass, not plastic, so so far so good.
However, does anyone know how to fit it to the phone ? I'm not sure if it comes with adhesive or not (didn't look at it in detail) and how to remove the old digitizer without damaging the phone ?
thanks,
Arnaud.
If I'm not mistaken someone here in XDA had already open up the Defy. Search and you find it. But you will need to replace the front casing as well once you opened up your Defy..
Or you can follow this site guide Here
Ok everyone, I looked into this a bit deeper.
The digitizer I got from ebay selle Ecell looks genuine. It has the same serial number as the original and everything looks exactly the same. For those looking for a genuine Gorilla Glass replacement digitizer, I think we've found it.
There is no adhesive though and I am still looking for something suitable.
Farsight, you DONT have to replace the front casing once you've opened up the Defy. Or at least I don't see why you should.
Anyway, I'll keep you up to date as soon as my defy is back in action.
Cheers,
Arnaud.
ZookNC said:
Ok everyone, I looked into this a bit deeper.
The digitizer I got from ebay selle Ecell looks genuine. It has the same serial number as the original and everything looks exactly the same. For those looking for a genuine Gorilla Glass replacement digitizer, I think we've found it.
There is no adhesive though and I am still looking for something suitable.
Farsight, you DONT have to replace the front casing once you've opened up the Defy. Or at least I don't see why you should.
Anyway, I'll keep you up to date as soon as my defy is back in action.
Cheers,
Arnaud.
Click to expand...
Click to collapse
If I'm not mistaken, the idea for changing the front casing is to ensure the phone remains water resistant.
Trying to replace broken gorilla glass
Here is a video of me trying to replace the broken glass on my Defy. The replacement was successful although the final result got dirty from the glue I used.
A better solution would be to replace the whole front housing with speaker, glass and digitizer. Anyone knows where one can by a complete Defy front housing?
I bought mine from no.1-tech on ebay and it looks genuine to me, too. Did yours come in a plastic bag that says "resealable" and has a sort of glue strip to close it?
Btw, globaldirectparts has everything, the digitizer, the adhesive, complete front and back housing etc. but the minimum amount of 5pcs per item is kind of a turn-off...
Yes, mine came in a resealable plastic bag with a glue strip as well.
I ended up buying some two sided tape and I cut strips to fit where the original adhesive was. It all looks very clean but now the proximity sensor doesn't work properly and the screen turns off whenever I make or answer a call. It turns back on when I press on the screen in the top left hand corner. I tried searching for a way to recalibrate the proximity sensor but I haven't found anything that works on the Defy.
If anyone has any idea on how to do this (and I'm pretty sure it's possible), could you please let everyone know?
Thank you
Cheers,
Arnaud.
I found this one.
http://cgi.ebay.co.uk/Motorola-Defy...K_Replacement_Parts_Tools&hash=item3cb8dd71f8
Don’t know anything about the dealer though
nice info, i dont know if we can change the glass. i thought before if we broke the glass, means we broke the LCD
jovus said:
True. Mine got dropped on the upper left edge of the phone(and it was from the height of 1m or less) and it got shaterd. Now I am searching for replacement. The phone and the screen still work but it just looks ugly.
Click to expand...
Click to collapse
Happened the same to me. from 1 meter. i got the glass from ebay yesterday.
torgil said:
Here is a video of me trying to replace the broken glass on my Defy. The replacement was successful although the final result got dirty from the glue I used.
A better solution would be to replace the whole front housing with speaker, glass and digitizer. Anyone knows where one can by a complete Defy front housing?
Click to expand...
Click to collapse
From the video. Best still to change the whole front casing together with the glass screen. It's very dirty in the end and surely the water resistant would not work anymore.
Did your Defy managed to power up? I see the video look like it's dead??
Sent from my awesome Moto Defy Gingerbread 2.3.3 - XDA Premium
Yes, the phone did power up - battery was empty.
The phone is working ok but, as you mentioned, the glass got very dirty. Using another type of glue and being a bit more exact when fixing the new glass to the front housing might have given better result.
As for the water reistance I'm already convinced that the defy is water resistant but the front speaker is not. Already got two front speakers replaced because of water damage.
I'm looking for a front housing with glass and speaker. I've already tried to replace the speaker om another defy but that was not so easy because the speaker is glued to the front.
Its to hard to manage threads for all platforms so im going to consolidate all the questions here http://forum.xda-developers.com/showthread.php?p=31998128#post31998128
Well I read a lot of places that it couldn't be done. I have successfully replaced just the glass. I recorded it on my Gopro so everyone can see how its done. If you find it useful hit the thanks Make sure you spread this around so people stop buying 300 dollar full LCD assemblies.
without further adieu
http://www.youtube.com/watch?v=W4Gx5fLy0NQ&feature=youtu.be
Fixed the sound issue with the video
I saw your post on Reddit. What I'm more interested in is how this affected picture quality. Obviously there's a layer of glue missing from inbetween the display and glass. Also you did a shoddy job on cleaning it properly before applying the new glass .
Thanks for this guide.
Going to test it on a broken s3 i have lying around.
Sent from my GT-I9300 using xda premium.
There is a thing i didn't catch. The digitizer is apart from the glass right ? Here would it be in the video ? I am asking because i saw on ebay the glass being sold and the glass + digitizer.
Sent from my Nexus 7 using xda premium
AndreiLux said:
I saw your post on Reddit. What I'm more interested in is how this affected picture quality. Obviously there's a layer of glue missing from inbetween the display and glass. Also you did a shoddy job on cleaning it properly before applying the new glass .
Click to expand...
Click to collapse
Lol... I did all of this last month. A bloody PITA to clean and remove all the glass shards (took me 2 hours just to clear up all the sharp shards of glass). Yes there is a layer of glue (it's acually some sort of silicone rubber) that you need to put on. My advice? I used the Selley's All Clear Multipurpose Co-Polymer Sealant, so it's crystal clear and not translucent as some other clear RTV Silicone. Also remember to use some microfiber cloth to clean the surface of the LCD and your digitizer before you seal it, if not, some dust/debris might get caught inside!
You need to put this layer of silicone because moisture will seep in and cloud up your screen, if you did not!
Again, if you want to save a good amount of money and your LCD is not cracked, AND you can DIY, by all means do this!
makimo2989 said:
Lol... I did all of this last month. A bloody PITA to clean and remove all the glass shards (took me 2 hours just to clear up all the sharp shards of glass). Yes there is a layer of glue (it's acually some sort of silicone rubber) that you need to put on. My advice? I used the Selley's All Clear Multipurpose Co-Polymer Sealant, so it's crystal clear and not translucent as some other clear RTV Silicone. Also remember to use some microfiber cloth to clean the surface of the LCD and your digitizer before you seal it, if not, some dust/debris might get caught inside!
You need to put this layer of silicone because moisture will seep in and cloud up your screen, if you did not!
Again, if you want to save a good amount of money and your LCD is not cracked, AND you can DIY, by all means do this!
Click to expand...
Click to collapse
The shottyness was because everyone on the damn internet told me it wasn't going to work lol. If I did it now I would be MUCH more careful. I was going to send the device out for insurance anyway so I igured I would just try.
tntgdh said:
There is a thing i didn't catch. The digitizer is apart from the glass right ? Here would it be in the video ? I am asking because i saw on ebay the glass being sold and the glass + digitizer.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
If you're talking about thu wire, taht is for the left and right buttons
It's good to see you can replace the lens without replacing the digitizer and screen. I broke my lens around 1 month after buying my S3. I live in Singapore. Samsung replaced the front of the phone for $137 SGD (~$111 USD).
If you are worried about this happening just get a squaretrade warranty with the accidental damage protection vs. having to DIY.
Thanks for the vid!
Or in other words, is the lens cover scratch resistant? I ask this because I had the unfortunate case of finding out the hard way - within just a couple of weeks of getting my S2 that the cover wasn't Gorilla Glass.
So if the N4's lens cover isn't Gorilla, then could someone recommend a scratch guard please? Or maybe a scratch guard for the entire back which also protects the camera lens?
This is just speculation because I doubt you could ever get the official answer, but I doubt it is gorilla glass. It is definitely not part of the back glass but an inset piece. Gorilla glass is usually used more for the strength rather than it's moderate scratch resistance so I doubt that they went to the trouble. It is also slightly lower than the surrounding surface which would naturally help prevent scratching. I don't know of any commercially available back protectors that would cover the lens, but if you are that concerned about it just get one of the generic screen protectors from walmart and a pair of scissors and make your own.
I've never damaged the lens to where it affected any of my phones and I've had a lot all the way to the g1.
Sent from my Nexus 4 using xda app-developers app
Nexux 4 Camera LENS - NEED PART HELP
Sorry for digging up an older post but lets say hypothetically you broke your camera lens for the Nexus 4 (but everything else is ok) camera, back etc... any way i can find a new one? I've been looking and haven't been successful yet...
This is the only post I've seen that even talks about the fact that it appears to be a separate piece... it's not part of your back glass and it's "recessed" inside - nestled between the back and the camera itself... a little square piece...
[deXter] said:
Or in other words, is the lens cover scratch resistant? I ask this because I had the unfortunate case of finding out the hard way - within just a couple of weeks of getting my S2 that the cover wasn't Gorilla Glass.
So if the N4's lens cover isn't Gorilla, then could someone recommend a scratch guard please? Or maybe a scratch guard for the entire back which also protects the camera lens?
Click to expand...
Click to collapse
drakonan said:
Sorry for digging up an older post but lets say hypothetically you broke your camera lens for the Nexus 4 (but everything else is ok) camera, back etc... any way i can find a new one? I've been looking and haven't been successful yet...
This is the only post I've seen that even talks about the fact that it appears to be a separate piece... it's not part of your back glass and it's "recessed" inside - nestled between the back and the camera itself... a little square piece...
Click to expand...
Click to collapse
Haven't found anyone selling just the lens cover, but you could buy the whole camera module for ~ $10. If you're looking for just the piece of glass between the camera and the back, then you'd have to buy the whole glass back unfortunately.. might be cheaper to just cut a bit of a clear screen protector and use it.
Yes it doesn't effect picture quality at all. But be carefull it isnt gorilla as the front one. I never put screen protector or a case. The front glass is zero scratched for about a year now but the camera glass is.
So take care guys. Protect the camera glass. How I dont know !!
bought it for some real $$$$ , why i would leave it without cheap screen protector and case ?
mjrshark said:
bought it for some real $$$$ , why i would leave it without cheap screen protector and case ?
Click to expand...
Click to collapse
Its a matter of luck. A little grain of sand on the desk could have done it. Also no case covers the camera completely. It just elevate it from the surface.
ashouhdy said:
Its a matter of luck. A little grain of sand on the desk could have done it. Also no case covers the camera completely. It just elevate it from the surface.
Click to expand...
Click to collapse
something is better than nothing...the cover will certainly not allow the camera touch the surface meaning no friction to cause scratches meaning almost no scratches on most surfaces unless you got gravel around you lol
Sent from my Samsung Note II N7105 LTE using Tapatalk 4
I put my Note 2 always on my pouch.
Screen
You can always replace the note glass, it comes with the housing which u can get for about $10 on ebay and it's fairly easy to install. (source: I replaced my Housing last week )
Tunaism said:
You can always replace the note glass, it comes with the housing which u can get for about $10 on ebay and it's fairly easy to install. (source: I replaced my Housing last week )
Click to expand...
Click to collapse
Woooow thats a great info I will play hard again
Tunaism said:
You can always replace the note glass, it comes with the housing which u can get for about $10 on ebay and it's fairly easy to install. (source: I replaced my Housing last week )
Click to expand...
Click to collapse
And it is the same gorilla glass that is mounted in the Note? Hmm, i don't think so.
EDIT: sorry, didn't read "camera" -__-
So I've been using this LS993 which is the Sprint version, for about 3 days now. It looks like the lens that covers both rear cameras is all scratched up. I ordered a case for the phone but it's not arriving untill tomorrow. I believe a case would have prevented this from happening but too late now. Do you think Sprint would exchange for a new one, or do you think LG would do anything about it? Thanks for any input.
They will not exchange for a new one unless you claim a manufacturer defect or something. FWIW, case would have probably done little to prevent that as almost all cases I've seen don't cover the camera. Maybe offered some protection by raising whatever could be rubbing against the lens off the phone a bit. But against sand or keys it's no match. The camera is Gorilla Glass 4 I believe, but just goes to show you that it can still be scratched.
I have cut out and placed an old screen protector over my cameras to prevent exactly this. With the camera being flush to the phone, there's no protection.
Sent from my LG-H830 using Tapatalk
Are you sure there is no sticker on the lens that you need to remove?
Pretty sure there isn't. I've picked at the edges with no luck. I can't believe the glass would scratch that easily though. It had to have been from just setting the phone down on the table or kitchen counter.
bowhunt2005 said:
Pretty sure there isn't. I've picked at the edges with no luck. I can't believe the glass would scratch that easily though. It had to have been from just setting the phone down on the table or kitchen counter.
Click to expand...
Click to collapse
Granite will scratch it. There's a durability test out there that mentions this...
I ordered a case before I even got my phone. Helps with gripping when taking shots and it won't slip out of the hand as easily...
Mine is 5 days old and also all scratched up. It has been in a case from the 1st hour. It seems that even rubbing it with a cotton shirt seems to scratch it even more. I'm going to asking for a replacement or possibly switching to the S8. This is a defect!!
Have you guys seen this?
https://www.reddit.com/r/lgg6/comments/64h13y/how_to_fix_camera_scratches/
Someone's claiming that the glass itself isn't what's scratched but rather a coating that comes off.
Obscure Reference said:
Have you guys seen this?
https://www.reddit.com/r/lgg6/comments/64h13y/how_to_fix_camera_scratches/
Someone's claiming that the glass itself isn't what's scratched but rather a coating that comes off.
Click to expand...
Click to collapse
Yes the same person posted on XDA
https://forum.xda-developers.com/lg-g6/how-to/camera-lens-scratches-t3587051/page2
maruichan said:
Yes the same person posted on XDA
https://forum.xda-developers.com/lg-g6/how-to/camera-lens-scratches-t3587051/page2
Click to expand...
Click to collapse
Saw that after I posted.
I just bought a g6 and had the same issue. I had a screen protector from thebforst minute I got it but it scratched anyway on the rear camera lens. I thought maybe there was a plastic film protecting the lens but couldn't pull anything off. I then returmed into trouble and got another one and the same exact thing happened??? I have not been near the beach or anything so I'm not sure where the scratches came from? So I'm temporarily using a film screen protector to protect it until I figure out what the deal is with this rear glass. I was a le to chat with only and she did say there was a film on the rear camera lens but again when I tried to pick the corners nothing happened. I really dont known what to think because if I take it back to T-Mobile they will think I'm nuts. But this does cause an issue with the camera. The pics get a bad, bad flare for night pics with street lamps. When the lens is clear the flare doesnt happen. What do we do? I will try and call lg again but the people in the phone arent technical. I kmow I read the post where he says there is a coating that you buff off but should that coating be there? I dont want to ship it to lg because I need a phone for work plus they repair centers never tell you what they did to fix it? Is there a film? If there is Jerry rig didnt mention it on his testing. How can we confirm what the true issue is? For 650 I better get camera quality I expect for that kind of money. I dont want to give it back because I dont want a big bezeled phone, plus I dont like Samsung or apple. The only phone to get is the oneplus3t but they are rolling out the one plus 5 in a month and that will be bezeless. I feel screwed
Same issue here. Multiple G6 handsets including mine and my manager's. All with scratches. Almost all had cases. I am very careful with my device. Seems that if you just look at it wrong it scratches.
Other than polishing the coating off the lens as someone else here has done, you can cover the lens with a lens protector until they come out with a tempered glass version. Several have deduced it is the coating that is getting scratched, not the glass.
Currently I am using the Nillkin H+PRO since it was the only thing available at the time. I reviewed it here and it has pictures... comes with a tempered glass screen protector for front, two camera lens matte protectors and installation kit.
https://forum.xda-developers.com/showpost.php?p=71921533&postcount=50
I highly suggest to do this until you either you decide to polish, purchase tempered glass protection, etc. No reason to allow it to get worse. I think once a tempered glass protection comes out for the camera lens I will be good to go.