Does someone know where the log-file of this tool is placed?
I'm two years late, but I found this thread because I have the exact same question.
There is a "Log NMEA" option in HTC GPS Tool (I'm using v1.2.2.17), but it doesn't let you choose the path, nor does it tell you where it will be saved.
I found it - it's in main memory, under \My Documents\ folder. The NMEA logs created will have a name in this format: HTC_GPS_[YYYYMMDD_HHMMSS].txt.
Sorry for the necromancy, but I'm doing this for the benefit of anyone searching as answer to the same question.
Related
Hi,
After many hours of trying to get tomtom to work on my mini s I finally did it. Only one problem now is hopw do i get the voice files to work? I have transfered the voice cabs that i want over to the device and storage card and ran from there. Installed perfectly but still no voices within tomtom? What am i doing wrong?
cheers
Well, in the directory u find tomtom directory, make a new sub-dir with the name tomtom and put the voice files there.
so i put the new "tomtom" folder in mydocuments/tomtom?
eg.
my documents/tomtom/tomtom
then do i install from here?
cheers
Hi!
@ferritt: I'm really wondering why your TomTom Setup is so complicated (compared to mine)... Most of us just copied the correct voice.cab (UK Janes file is called engf.cab) to the device and started it (NOT installing to the Storage Card).
It creates a folder under /My Documents -> tomtom with the following files in it -> CurrentMap.dat, data02.chk (that should read data05.chk for english Jane) and data02.vif (data05.vif).
Final view:
/My Documents/tomtom/
CurrentMap.dat
data05.chk
data05.vif
Hope this helps.
Greetings
plant
see what i have mate is the voice files (cab) from my tomtom 5 cd. But also i have the .chk files aswell on another tomtom cd which is the only one i could get working. so should i just put them into the .chk files ionto the tomtom folder?
cheers
plantagoo said:
Hi!
@ferritt: I'm really wondering why your TomTom Setup is so complicated (compared to mine)... Most of us just copied the correct voice.cab (UK Janes file is called engf.cab) to the device and started it (NOT installing to the Storage Card).
It creates a folder under /My Documents -> tomtom with the following files in it -> CurrentMap.dat, data02.chk (that should read data05.chk for english Jane) and data02.vif (data05.vif).
Final view:
/My Documents/tomtom/
CurrentMap.dat
data05.chk
data05.vif
Hope this helps.
Greetings
plant
Click to expand...
Click to collapse
got it sorted at last
I was putting the files in the tomtom folder found in the root of the device not my documents.
cheers for ya help mate.
I would like to declare this thread closed. lol
cheers again
plantagoo said:
Most of us just copied the correct voice.cab (UK Janes file is called engf.cab) to the device and started it (NOT installing to the Storage Card).
Click to expand...
Click to collapse
It is perfectly possible to install everything to the Storage Card. There's a complete walkthrough here (for the Universal, but the Wizard is very similar)
Edit: added direct download here
I'd like to save my new docs into the 'My Documents' folder of Storage Card automatically in order to save space in main (RAM) memory. I know it seems to be easy, just go to 'Options' and set 'Save to' Storage Card. I've done it in case of every frequently used program.
Camera and Excel works well, they place the new file into 'Storage Card\My Documents\My Pictures' and 'Storage Card\My Documents'. But Pocket Word and Notes place the new file just into Storage Card root.
Any hint how to solve it? Maybe some registry settings?
Thanks in advance
Tibor
P. Word registry settings - where?
Sorry, I know my question is not really Magician-specific, but I have an MDA Compact (with 1.13.00 WWE ROM, 1.13.00 Radio and 1.13.131 WWE Extended ROM) therefore this is the forum I often visit.
I appreciate if somebody has some hint...
The fact is that I tried to search for the Registry for Pocket Word settings, but found nothing (except some converters).
Solution
As it was my first request for assistance I thought the community was more helpful...
But no problem, finally I found the solution. (source: support.microsoft. com, article ID: 319616)
Let ME help if somebody has similar problem: you should delete the zero-byte-long 'ignore_my_docs' file from the root dir of Storage Card. This file prevents the built-in applications from using 'My Documents' dir as default/root folder while listing the files in 'Open File' window.
(If you need further explanation, refer to the above-mentioned Knowledge Base article.)
Cheers,
Tibor
Re: Solution
ctibor said:
As it was my first request for assistance I thought the community was more helpful...
But no problem, finally I found the solution. (source: support.microsoft. com, article ID: 319616)
Let ME help if somebody has similar problem: you should delete the zero-byte-long 'ignore_my_docs' file from the root dir of Storage Card. This file prevents the built-in applications from using 'My Documents' dir as default/root folder while listing the files in 'Open File' window.
(If you need further explanation, refer to the above-mentioned Knowledge Base article.)
Cheers,
Tibor
Click to expand...
Click to collapse
I don't have a zero length file in my Storage Card. There was such a file in my /Storage directory. Is that what you meant?
I think the reason no one answered is that no one knew anything, not for lack of interest. Thanks for sharing the info...
You do realize that your storage card is not backed up by Activesync, whereas the main memory location is backed up? (Assuming you selected to sycronize files in Activesync)
Are you sure about the article number? I showed that article as "How to create a resource-only DLL to host an Outlook Today page"
Article ID : 319616
Last Review : April 30, 2004
Revision : 1.0
Re: Solution
Yes, this is the file I meant. I used the same MMC card with my previous device (Qtek 2060) that -I think- ran an older op. system, maybe that's why 'ignore_my_docs' was created on the card.
Yes, I use ActiveSync. I know it's not capable of synchronising the storage card, therefore I also use MobSync. It can.
Sorry, I mistyped the Article reference. The right ID no.: 319516.
Tibor
[/b]
Hi Guys, can anyone help, I have just got TT6 with UK Maps, installed it as directed but when TT6 runs, get message that no map is found.
Seem to have everything in place and it is a tt6 map.Have hard resert and re installed but still the same. Any Suggestions??
First of all this should be in the main wizard forum not the upgrade forum. There are several threads there containing all the information you need, plus more with a search.
Anyway, on to the solution:
Check two things. Ensure you have a folder called "tomtom" in your "my documents" folder if you do not, copy it from the root directory. Next from this directory copy "currentmap.dat" to your PC, back it up then edit using notepad to ensure it is pointing to the folder that contains your maps eg (1st char may differ): "& \Storage Card\UK Maps\ " resave it as a dat file put it back in \my documents\tomtom\ and try running it again.
Best of luck
tomtom map
make sure you have folder on your mcard named GB map and its not in another folder as i had same problem and thats how i got it working hope it helps
Thanks ruined, serched for the currentmap.dat but none found, created one with the text /storage card/great_britain/ in and copied file to \my documents\tomtom but still not seeing map. any other suggestions??
how do you get tomtom6?
Hi,
I have just been on the following thread:
http://www.satter.org/2007/03/lets_shell_some.html
And want to know if anyone can assist me in this forum with the production of a working file for the thread.
I created a CPF file and dropped it into the Herald and executed it. I received an System Notification entry in my Text messaging folder stating 'your device settings cannot be changed by Test.cpf'
Does anyone know whether this is because I do not have the OTA Enterprise prvileges or is ot just that I screwed up in the execution of the file or contents?
I thought in the file it suggests I only need manager access to execute these entries.
All comments are appreciated - I am not a hardcore developer so I have posted this with some trepidation but I need a little help here to get the example working.
Kind Regards,
PianoSam.
make an application unlock
Erofich,
Many thanks for your reply but I wonder if you can explain a little further...
Is it possible to execute changes to the registry with a file like this or do I need to do some programming?
Sorry for my being so ignorant...
PianoSam.
Hi!
I`m so lucky I found this site and first of all my very regards to the touch-flo developer(s) it works just great on my charmer!
My question is how can I change the standard destination folder when I`m installing stuff?
When executing a cab on the storage card, it always installs to "Program Files" and during installation of an exe via AS the option "always install to standard folder" is not available...
Thanks in advance and keep up this excellent site!
gore
ok since noone is answering this seems to be a simple registry issue, right?
Might anyone just say "yes" or maybe even post the exact location of that value?