Hi,
Sometimes when I need to turn it on by pushing the on/off switch, it started to perform soft reset! I also found out that when my D810 going to sleep (in my words), all keys but the on/off switch were dead even the phone. I tried to call myself using another telephone, the D810 was off!
Is there any idea? Or any advice?
firstly, have you ever dropped your d810 ?? or maybe 'accidentally' flush in on water...
if you don't, then
1. for auto reset power button : consider to check the 'shortcut button' on Start -> Settings -> Buttons, check on there, if you assign power button to 'Soft Reset'
2. for 'dead key' : check on Start -> Settings -> Key Lock, check on there, if you Set option into Lock button if device is locked, and change it into Lock All Button Except Power Button
for the third problem, have you ever try your sim card into another gsm phone ?? and call it again ??
ps : some dumb question...you sure it's not on flight mode ??
aditama85 said:
firstly, have you ever dropped your d810 ?? or maybe 'accidentally' flush in on water...
if you don't, then
1. for auto reset power button : consider to check the 'shortcut button' on Start -> Settings -> Buttons, check on there, if you assign power button to 'Soft Reset'
2. for 'dead key' : check on Start -> Settings -> Key Lock, check on there, if you Set option into Lock button if device is locked, and change it into Lock All Button Except Power Button
for the third problem, have you ever try your sim card into another gsm phone ?? and call it again ??
ps : some dumb question...you sure it's not on flight mode ??
Click to expand...
Click to collapse
Nowaday my D810 became normal, it seems ok, thx anyway!
Related
Hi, after i installed pocket plus 3 in my 9100, it hangs, i do a soft reset and since then it always hangs in the boot screen.
Any1 can help me please¿?
Thx in advance
Thorete.
Thorete said:
Hi, after i installed pocket plus 3 in my 9100, it hangs, i do a soft reset and since then it always hangs in the boot screen.
Any1 can help me please¿?
Thx in advance
Thorete.
Click to expand...
Click to collapse
this is a known bug on 9100, I also had to HARD RESET. there was already such topic, find it, there is a solution there too. HARD reset by holdin the buttons on both upper sides (comm manager and voice command) - it will vibrate, then press and hold RESET button for 5 sec
I´m sorry, but when i press the 2 buttons it doesn´t vibrate, else i push the reset during 5 seconds but it is the same.
Sorry for my poor english...
Thorete said:
I´m sorry, but when i press the 2 buttons it doesn´t vibrate, else i push the reset during 5 seconds but it is the same.
Sorry for my poor english...
Click to expand...
Click to collapse
hmm, why don't you see in the printed manual, page 80. It reads:
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
worked for me?
Thx for the help.
I have read the manual, and i´m doing exactly it says.
The solution for me was:
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button,
and the release the stylus and 2 seconds later release the 2 buttons.
Now i uninstalled the fu**ing Pocket plus.
ur not alone, it got me too.
Mine however would not hard reset, had to use the bootloader to re-flash the rom! The air was getting pretty blue......
Guys - you all just need to chill for a moment...
PocketPlus3 works beautifully with the wizard in all but one area - the Safe Mode.
For some reason the switch to WM5 buggers this up so what you need to do is this:
1) Install Pocket Plus 3 to your device.
2) Start > Settings > 'System' Tab > Spb Pocket Plus.
3) Scroll down the little list and uncheck the 'Safe Mode' box.
4) Soft-reset and be happy
Hope this helps!
435nk9 said:
Guys - you all just need to chill for a moment...
PocketPlus3 works beautifully with the wizard in all but one area - the Safe Mode.
For some reason the switch to WM5 buggers this up so what you need to do is this:
1) Install Pocket Plus 3 to your device.
2) Start > Settings > 'System' Tab > Spb Pocket Plus.
3) Scroll down the little list and uncheck the 'Safe Mode' box.
4) Soft-reset and be happy
Hope this helps!
Click to expand...
Click to collapse
Yes I also confirm that I have it running after the mentioned above problems . I think it is worth having, just uncheck the SAFE MODE box immediately after installing SPB and before any resets...
Oh oh, I am really in problems now. I think I have the same problem with Pocket Plus, and my MDA Vario does not start up any more. I only see the bootscreen. After doing a hard reset I see horizontal coloured bars and that's it???!!!!
HELP
How do I get out of this missery?
I use SPB PP + 3.0.4 with safe mode switched on without any problem. During boot is shows dialog what to do if you want safe mode (but i've never used safe mode yet) and device starts well.
Hi lads, happy to be a member of this forum, just reciv my qtek9100, my problem is that the right key button is not responding, but if u tap the ''contact'' its ok only the soft key... and when it get to sleep mode and turn-on again the contact automatically pop-up ...delay? another thing is call and button led(green & light) doesnt turn off. Only Turn-off when goes to sleep mode...please help
thanks a lot
deepsea
i guess i need to return this for repair, now the problem more than that each time i turn on from sleep mode the contact flash in , then the menu. it seem that thebutton is locked up or something.
Try doing a hard reset before returning the unit..
I only tried doing ''Clear storage'' on system menu I don't know how to do the button trick.. done many time but always fail maybe the right button is still lock to press the reason why the hard rest goes to cancel.
deepsea
Qtek9100
Bytheway i check the registry entry and found only
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112
I didn't find this
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113
I wonder if i can put this registry and wont mess evrything...
hello...
my on/off button is defect. so i cant switch it on. Only via reset
can i configure another button for reactivation from standby? because that does not work anymore too
thanks for help
not sure about hermes but my phone turn on at the press of any key unless i set it only to turn on by on button in buttons in settings
Go to the settings, then to system, then go to the keylock options in there and set it to not lock at any time.
Works with any key, but its not really a good idea to have that in your pocket.
I would say you should get the button repaired instead.
Thanks a lot guys...
does someone knows how i can switch off the phone? everytime i want to swithc it off i have to push the reset button or do a soft reset :/ i thin k a regular shutdown would be better...
i friggin have the same problem. My girl dropped my phone and the power button is messed up...
I press the camera button to turn on tho.. i cant turn off unless i let it sit and it does it itself.
http://www.mobiletopsoft.com/pocket-pc/download-psshutxp-turn-off-display-off-pda-0-29.html
Thank You ^^^
Well in several ROMs the device turned off after several seconds, and until I push the turn on/off button it will not respond to other buttons (e.g. send), the device is not locked.
In other ROMS when the device is turned off, every button are active.
Is there a way to make the buttons not active when the device is turned off ?
Just go to "start / settings / system / Key Lock" for locking options.
sagytb said:
Well in several ROMs the device turned off after several seconds, and until I push the turn on/off button it will not respond to other buttons (e.g. send), the device is not locked.
In other ROMS when the device is turned off, every button are active.
Is there a way to make the buttons not active when the device is turned off ?
Click to expand...
Click to collapse
Other option is to edit registry.
Got to HKCU > ControlPanel > Keybd and set DefaultKeyLock to '1'
Perform soft reset and problem should be gone.
Thank you both, it was very easy....
I bought a new phone (HTC TOUCH 2) from China.
It is same as the original one.
My problem is: I can't do a HARD RESET or Soft Reset by Button.
I searched the forums and found some talking about pressing (VOLUNEUP+VOLUMEDOWN+Power.
others talking about VOLUMEDOWN+Power
I tried every possible key compinations to do the HARD RESET with no success.
When i press VOLUNEUP+VOLUMEDOWN+Power, a green screen show up with the bellow data:
"THIS OPERATION WILL SET KITL MODE.
CURRENT SETTING........
DISABLE KITL: CAMERA
PASSIVE KITL:VOLUMEDOWN
ACTIVE KITL: VOLUMEUP
I searched for a Camera button but it seems this button is not there at all, only one tall button on the left side for Volume (up+down)
Also there is no Reset button at all, i searched every where in the mobile with no success even if i remove the styles, nothing there at all.
is there any help?
I have some problem with my htc clone i have no camera button but i must change kitl to disable to comunicate my htc with pc with active or passive kitl mode usb connection are not recognized by my pc. Is there any way to change kitl mode using wm mobile aplication or something like that i want to change my rom too. cause this one is probably for another htc with camera button
Hard Reset
Go to menu -> settings -> system -> clear storage to hard reset your phone
don't work with my problem after clear storage kitl stays in passive mode i need disable for usb comunication
Also, all owners of this mobile having the below problems:
1- Can't load normal Rom files (.nbh), they should load it through a flash memory
2- Rom File size should be smaller than 128mb.
3- Can't connect it with PC Post#2.
4- No Camera Button !!!!
Mine was disabled and I don't know which combination of buttons I pressed to enable it but now it really startups slow and also the usb connection problem came up. So anyone?
I tried each and every possible key combination with no success to Disable kitl.
Any help?
I would never trust a clone for a wm as i do keep all of my work on it. Never ever trust a chinese clone company for this. Better to pay a few dollars more and buy the real one than risk loosing all of my data kept.
You are right 100%.
but, what about the current case?
Do i have to put it in the trush bin?
Ravash said:
Mine was disabled and I don't know which combination of buttons I pressed to enable it but now it really startups slow and also the usb connection problem came up. So anyone?
Click to expand...
Click to collapse
Press (VolumeUP + VolumeDown + Power) then select Passive again...Working fine
Once press the "Windows logo" + "Volume Up" + "Power" working hard reset
Hard Reset is easy. Press the Volume up an down key from the center.i.e press it form the middle. like that both the up an down keys would be pressed. then Power on. Easy. yes it wasn't easy for me too in the start but a bit more pressure and it works.
Gothik said:
Hard Reset is easy. Press the Volume up an down key from the center.i.e press it form the middle. like that both the up an down keys would be pressed. then Power on. Easy. yes it wasn't easy for me too in the start but a bit more pressure and it works.
Click to expand...
Click to collapse
I have the same problem. Yesterday I put my cell phone passive KITL mode, but when I connect to my computer, nothing happens.
I did hard reset and soft reset but nothing happens.
Help me!
have you installed microsoft activesync (windows XP) or windows mobile device center (vista or 7)? i think you have to install those first.
robekia1 said:
Press (VolumeUP + VolumeDown + Power) then select Passive again...Working fine
Click to expand...
Click to collapse
How do you Select passive, when you get the screen of "this operation will set kitl mode. thank you
The screen will guide you.........
DID YOU REALLY PRESS THOSE BUTTONS?